Satellite Pro C70 - A - memory upgrade

Similar Questions

• Satellite Pro A200 PSAE4E memory upgrade:

  Satellite Pro A200-PSAE4E: comes with sticks of memory 2 x 0.5 GB installed.
  I think that these are some DDR2?
  Please can anyone confirm this and advise the maximum memory I can install as I appreciate different for
  models... but I can't find any information for this Satellite Pro A200-PSAE4E:
  Dave was soon

  Yes. Your portable computer is DDR2 RAM module. I don't know about you but I think you can improve it up to 4 GB. You can for example use a 2 GB RAM and level to 2.5 GB.
  Compatible RAM 2 GB module is with the PA3513U-1M2G part number.

  Good bye

• Satellite Pro A10-S703 Memory Upgrade

  I can't find the specifications for the upgrade memory for the model SA10-S703. Should what memory I buy? Please help, because this is the kind of emergency

  Hello

  Compatible memory modules for your unit are:
  PC2100 128 MB (PA3126U - 1 M 12)
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51).

  Your device can handle with max 1 GB of RAM.

  Good bye

• Satellite Pro C70-B-11 t - need help to improve memory

  Hello

  I have to expand the memory of a Satellite Pro C70-B-11 t by adding 1 module 8GB.
  The data sheet shows that the laptop can go up to 16 GB.

  I can't find the door opens for access to the memory locations.
  Should I remove the entire back panel?
  Do you have a procedure?

  Thank you for your help.

  Upgrade of RAM on this Satellite Pro is a bit complicated and I think that it should not be done by the owner of the laptop.
  Problem is that you will have full access to the locations of memory if the laptop top cover is completely deleted and it should be done by Toshiba service only. In the case that you do on your own, you can lose warranty valid.

  Try to contact Toshiba service nearest and ask for help. They can do for you, and I think that it cannot be so expensive.

• Re: Satellite Pro M40: what memory modules that I can use

  Hello

  I was hoping someone could point me in the right direction.
  I have a Satellite Pro M40 part number: PSM46E-00H002EN

  I really want to upgrade the memory, but I don't know what to do.
  I know I want two 1 GB ones but I do not know what kind.

  I looked and there seems to be so much of.

  Could someone tell me exactly what I want or give me a link to buy.
  I would be grateful rerally.

  Hello

  I think you should check this page from memory Satellite Pro M40:

  Memory for Toshiba Satellite Pro M40
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=26119&ft=m&St=3

  It is said that you could use the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM memory modules and you could upgrade the memory up to 2 GB of RAM

  Good bye

• Departure from Hi-speed on Satellite Pro C70 - B

  On my Satellite Pro C70 - B new, I put the option to hibernate the laptop when I close the screen.
  After a few updates, now I can't enter sleep or hibernation mode, but I have the new option start Hi-speed.
  But when I use this option, the system goes to the login screen, does not freeze. Is this right?

  How to disable the start of hi-speed feature?
  Thank you
  MACI

  Some updates? Updates? Microsoft updates?
  To be honest I do not know which option you mean exactly can you send a screenshot where you can activate this option?

  Only the option I known is 'quick start '.

• Satellite Pro C70 - B - 14 X - file TecoACDC.csv created automatically

  If you create a folder c:\temp on the toshiba Satellite Pro C70-B-14 X
  a TecoACDC.csv file is automatically created (probably by a toshiba tracking tool)

  This file contains the values of power and voltage and adds every 2 seconds with the current values.
  It seems to be a bug, because the file exists only if the user creates c:\temp and the file prevents more and more.

  This means that it will subsequently use to the top of a lot of space.
  Has anyone else seen this problem, or got a fix (apart from deleting the folder c:\temp)
  Thank you.

  I guess it's a temporal file created by Toshiba ECO Utility. I guess that the extension of the TDCA means mode, while the unit is connected to the power adapter.

  TOSHIBA eco Utility helps you monitor your energy savings by showing real-time approximate energy consumption. In addition, it shows cumulative approximate consumption and approximate when accumulated energy saving ecomode daily, weekly and monthly.

  I guess that the related information is stored in the temp. file.

• Satellite Pro C70 - B - 12 c - installation of the Package of added value

  Hello technician,

  could someone explain how to install the PPV on the Satellite Pro C70 - B - 12 c.
  I installed Windows 7 on the new Machine and want to use the utility function key.

  I downloaded the compatible vap on the driver download site. In the next step, I tried to install the PPV on the Archive of Toshiba Extractor. If I let install it automatically, I m only get the ODBC Driver-Installation Windows. So I canceled the Installation of the ODBC driver - and start the program installation of archive extracted.

  After the complete Installation, the function keys and the utility of the Flash card can be used. But the Flash card utility displays badly on the assigned keys functions. for example, on the keyboard the F11 key shows the power of the speaker function.

  The Flash Card utility indicates the Escape key for the same function switch (speaker). After the Installation of the vap, none called buttons work.

  I ve tested the function Key Utility for Windows 8.1. But this test was unnecessary.

  Thank you very much for your help!

  Hello

  Installation of VAP is not very complicated.
  You need to download the package.
  Save it to the disk (to office) and unzip the package (right click on unzip)

  > In the next step, I tried to install the PPV on the Archive of Toshiba Extractor.
  I m just wondering what you mean by install over?

  As I said earlier, after a clean install of Windows 7, you could install the VAP. But first this package must be decompressed. To decompress the package, you can use a program like WinRAR or WinZip

• Satellite Pro C70-A-159 boots white screen (or almost)

  A non-technical friend asked me to look at his Satellite Toshiba Pro C70-A-159.

  It was a Christmas gift and worked perfectly for eight months two days ago (according to him), he won t boot. Actually, it does, in a screen with no connection options to stop / restart / activate on screen keyboard etc. (reading these forums, is not an uncommon problem).

  Safe mode works very well, even with the network. Restore points three last system (one at a time) declining makes no difference. CHKDSK (at the DOS prompt) reported no problems. Gas station (in safe mode) won early that it is perhaps corrupt please reinstall or restart. I put t know how to do the first (and am not sure it s a good idea unless I know it will solve the problem), rebooting makes no difference. Start with logging or debug might be useful if I knew where it connected to!

  I suspect it has improved to 8.1 from the Microsoft site, no Toshiba. Before making a full backup of the data, regress of Windows 8 and follow the (fairly complex) instructions for upgrading to 8.1 properly, is there anything else I can try?

  Hi Adrian

  I also think that you should test the functionality with the factory settings. Talk with your friend and ask if there is some important data saved on his computer. Make a backup and install original recovery image.

  Here's the brief description - http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
  What you can do too before start you is to create recovery media, just to be sure you if something goes wrong. You can create this preinstalled use Toshiba recovery media creator support.

  Reinstall the original recovery image and check a bit how it works. You can improve it later to Win8.1.
  Here is page s Toshiba on the steps how to do this - http://www.toshiba.eu/innovation/generic/windows8_1-message/

  I think that your friend will be happy when you do all that and bring him back 100% of work and Win8.1 machine.

  Good luck

• Expanded for Satellite Pro M70 PSM75E memory

  I need memory paged to my Lotus Symphony programs.
  But it does not work in this PSM75E-009005DU Toshiba Satellite Satellite Pro M70 with Windows XP.
  On my desktop with XP, it works... I can set it up in preferences shortcut on the screen.

  If you want to upgrade the memory?

  As far as I know, Satellite Pro M70 PSM75E was equipped with different processors and chipsets for upgrade memory can depends on model that you bought

  But I think you could increase the RAM up to 2 GB of RAM.
  You can use the modules of 533 Mhz 200pin 2 x 1 GB of RAM.

• Satellite Pro M70: DDR2 memory matching question

  I have a Satellite Pro M70 (model PSM76E-00500KEN) with 512 MB of RAM in a housing and want to upgrade to 1 GB or more. I plan to put a 1 GB module in the slot to spare, but reading that there is sometimes a performance advantage of the installation of modules of DDR2 in pairs. Can someone tell me if there is any advantage to have the correspondence of the modules into the two slots of the Satellite Pro M70? Or, in other words, is there any reason not to run 1 GB in a slot and 512 MB in the other?

  Hello

  Dual channel DDR involves the use of memory modules DDR 2 to double bandwidth memory. The memory modules DDR themselves are no different. The only requirement is that the controller memory on the motherboard supports this interface dual channel.
  Please also see this site useful:
  http://www.4AllMemory.com/index.cfm?fuseaction=FAQ.FAQs&category_id=5

• Satellite Pro 4600: Question about upgrade RAM, CPU, motherboard

  Hello

  I have a SP4600 and because I love this machine, I want to give him the chance to stay with me - but unfortunately, it will only work by increasing its performance...

  Is anyone here has made some experiences in upgrading a SP4600 more than 512 MB of RAM?
  I know that this machine uses PC100 SD - RAM that is available up to 256 MB.
  But someone has tried successfully to put in PC133 memory? And if so, to were the limit?

  And more: what about the upgrade of the rest, for example, the CPU or the whole motherboard?
  Currently, his heart beats with 700 Mhz (Celeron). Would it be as easy as just another graft?
  Or would it be easier to exchange the whole motherboard?
  I've never done anything like this before and I'm not sure how the rest of the system can react on these interventions, in particular because the we-board-video and sound on board...

  I would be delighted if someone could give me some positive feedback on these issues...

  Hello

  You can only use the memory 100 Mhz modules because the FSB is limited to 100 MHz.
  If you use 133 Mhz modules, they will work only at 100 Mhz.

  You can upgrade the satellite Pro 4600 until 512 MB (2x256MB)
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=28447&ft=m&St=3

  Other devices such as the CPU or GPU are not extensible and the motherboard may be replaced only with the same motherboard

  Finally, you should know that the laptop technology is a little different and you can't compare it with any desktop computer. You can update some parts such as the memory or HARD drive, but that s all the

• Activation questions Win 8.1 on Satellite Pro C850-1EQ after upgrade

  Hello everyone!

  I face a problem after the upgrade of my TOSHIBA SATELLITE PRO C850-1EQ preinstalled version of windows 8 to 8.1.

  After installation windows ask the product key to activate windows 8.1, but I don't have this activation key.

  I called Microsoft (Greece), but could not help me and told me to call Toshiba (Greece).
  The man of Toshiba technical support told me to remind Microsoft!

  In addition, he told me to check here (https://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/) before starting the process. Step # 7 says "don't forget your Windows password. You may need to enter after update. »

  Now, I'm back to Win 8.

  Is there a way to learn my activation key before installation of w8.1?
  I tried to find that the use of various tools, but nobody found the key.
  In addition, after 8.1 install, a message says:

  + Error code: 0xC004C003 +.
  + The activation server determined the specified product key has been blocked.

  I trust Toshiba and I want to use the latest version of w8.1.
  I'd be grateful if someone Toshiba technician could help me with this problem.

  John (from Greece)

  Hello

  > I'd be grateful if someone technician Toshiba could help me with this problem.
  It's community of users

  > Is it possible to learn my activation key before installation of w8.1?

  No, the preinstalled Windows 8 Toshiba is already activated and during the upgrade to 8.1 Win will not ask you to enter the serial key...

  Windows 8 is activated?

  Try this: create DVDs of Toshiba Recovery (or flash USB memory stick). Use the recovery media to recover the computer laptop back to factory settings. Update of the Windows 8 at the last State and then do the upgrade to 8.1 Win

• Satellite Pro A10: Question about upgrading video card

  Hi guys, I have a laptop Satellite Pro A10 and I was wondering if anyone of you could help me.

  I want to improve my Ram card memory and video. The video card now is an Intel 82852/82855 GM/GME Graphics Controller and want a graphics card with at least 128 MB of memory on this subject.
  Any recommendation?
  Any help would be appreciated muchly.

  Hello

  It of not possible to change the graphics card. The graphics card is a small chip that attaches to the motherboard.
  This graphics card supports up to 64 MB shared memory. The graphics card gets this value of main memory if it s needed.

  The possibility to upgrade the memory of this device is something different.
  You can upgrade the memory to max 1024 MB (2x512MB) and these modules should work.
  PC2100 128 MB (PA3126U - 1 M 12)
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

  Hope this will help a little.
  concerning

• Satellite Pro P200 - parity memory error

  Hi all

  Sometimes, I get the following error message when I start my computer laptop http://www.geocities.com/atesfaye/Mar08_0001.jpg

  It's a Satellite Pro P200 with 2 x 1 GB RAM modules. I ran memtest on the memory installed together and individual modules. The results of the test came with no error. To read the different forums of discussion, some suggest that this error message may relate to graphics memory! Is there a way to test the graphics memory?

  Any help much appreciated!

  Can you tell us when this problem started?
  A has started after the upgrade RAM or other activity?