Shockwave Player not working not not on any site

sites like youtube, or here:
http://www.Adobe.com/software/Flash/about/
Work perfectly well (flash player)

but it's not like here:
http://www.Adobe.com/Shockwave/welcome/
or anywhere else with shockwave player (shockwave player)

I tried to reinstall firefox and the plugin several times, tried MANY different sites in multiple browsers.

Only, it does not work in firefox, it works in all other browsers I've tried.

I found the solution for shockwave does not.

1. go in topic: addons

2. make sure that "Shockwave for Director" is present

3. look for "Mozilla ActiveX Control and Support of plugins"

4 disable

5. refresh the page

It worked for me to get shockwave stuff is working again.

Tags: Firefox

Similar Questions

  • 40 Firefox does not Flash Shockwave player to work longer?

    Just upgraded to 40 of Firefox, it I cannot display any Shockwave Flash based sites or plugins, anywhere on the net.

    I've installed Shockwave player. All other browsers work fine.

    41 seems to work very well. 39 works fine as well.

    Do not confuse the Shockwave for Director plugin and the Shockwave Flash plugin, both are different plugins.

  • Awesome bar does not react. He does not attend any site or page (e.g. on the subject: config), not even in safe mode. No search engine available, cannot add.

    I can type any site or page I want in the awesome bar, by pressing 'Enter' there is no reaction at all. I can't go to any page that is not bookmark. There is no search engine, and I can't add. I reinstalled Firefox, restarted the computer, without result. The result is the same in safe mode. Firefox reset doesn't change anything. Firefox has become almost useless, please help.

    There seems to be a problem with Firefox 20 UNC paths when you use roaming profiles on network servers.

    It is being studied and followed through this bug report.

    • Bug 857672 - address bar works do not (roaming profiles; Path UNC OS support. File)

    (please, do not comment in the bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html)

  • For the last few days I can not access any site Web of Yahoo.

    I can't access all of Yahoo Web site. I have no problem with other sites. I have the latest version of Firefox and Java. The problem is not just with the mail. I can't access any yahoo site although my connection is recognized. Each site to yahoo, I get the message "error encountered processing your last request. This site is currently not available. (Error code 603). Try again later. "I tried to restore the system to an earlier date, delete all cookies, empty cache and analysis of viruses and other malware." Nothing helps. Is there a conflict with the latest Firefox, version 31?

    Hello, please try to reset firefox and see if that can solve the problem...

  • pictures will not download any site

    I can't get pictures to download on Web sites.  No reason?

    I can't get pictures to download on Web sites.  No reason?

    Upload or download?

    Why can't I upload photos on my sites?

  • Recently firefox will not access any web site Acer Aspire 1 Linux

    For the past few days firefox will not access any site, even if the wireless network is connected ok. NetBook runs ok other applications without any problem. When the browser shortcut is selected, shortened browser turns for a few seconds then stops. Nothing else happens.

    Can sometimes get the message 'cannot run the web browser by default. Input/Output error.

    I had the same problem (Acer Aspire One LINUX). RELOADED FireFox by following the instructions here:

    http://macles.blogspot.com/2008/07/installing-Firefox-3-on-Acer-Aspire-one.html

    Worked a treat.

  • Why Adobe Shockwave Player will not work for iSketch?

    There is an online game called iSketch - which is actually a pictionary online game - that requires Adobe Shockwave Player. However, I and many other Mac users can't play for some reason any. Whenever I try to play the game, this message always appears at the top:

    "Shockwave error ."

    This Shockwave animation there are errors which have caused problems of reading.

    Please contact the author of this content about this problem.

    Shockwave is unable to continue. »

    Apparently, Mac users such as I was not able to play the game since the year last because of this problem. Today, I downloaded the latest version of Shockwave (12.1.1.151) in the hope that the problem would have been resolved, but unfortunately it didn't. I've tested to see if Adobe Shockwave Player is even working on my Mac, and Yes, it is. I tried to play the game in Safari, Firefox, and Google Chrome, but the game is always does not. I must say it's very frustrating.


    Moreover, my Mac is the version OS X Mavericks (10.9.2), and Yes, the iSketch site was aware of this problem since they have been alerted to this topic last year.

    I (and many others) would be extremely grateful if this problem can be solved.

    ~ NinjaRisa

    Unfortunately, iSketch developers should handle this themselves. The error message suggests something wrong with their Director of film and is not something inherent to the Shockwave Player

  • DVD player not working not not since upgrading to Windows 10?

    Improved to win 10 of Win 7 and now cannot get my DVD player to work. Checked info from Device Manager which advises (Windows cannot start this hardware device because its configuration in the registry information is incomplete or damaged (code 19).) I tried to remove and reinstall the DVD player, but the error message still appears. Any ideas of how to solve my problem?
    My last resort would be to roll back to Windows 7 if I can't figure it out. : confused:

    I have the same problem with my SATELLITE A500 - 19(d) is code19 drivers must not be installed correctly.

  • Flash player not working do not AT ALL

    Good so I'll start by saying that I have to go to school for computer repair so I tried everything my little brain would think to solve my problem myself. Then I scoured google and other forums to see if there is a similar question to mine. I could find none. So here I am...

    My problem is that no matter what I flash drive just does not work...

    I uninstalled and reinstalled.

    I uninstalled and reinstalled my browsers.

    Searched the registry but could not find any file/input for flash anywhere...

    But my computer recognizes it as being installed in programs and features, however...

    I tried restoring the system as far as I could go, but no change...

    Short of reformatting (what I can do...) which is a last resort, is there advice that you guys might have?

    I'm sorry that you use in this.  You can type "subject: support ' and ' everything: plugins" in the Firefox address field and paste the contents of two pages in a response?

    This problem just started happening?  East - limited to just Firefox or have you seen this happen with IE or Chrome?  If it's just Firefox, you can start to run through the steps of troubleshooting listed in this FAQ:

    How to solve the safe_mode of Flash Player for Firefox?

    Thank you
    Chris

  • Adobe flash player works in utube, but not in other sites

    Hello - I have a hp pavillion latop, 1 1/2 years.  no problems

    the use or display of any video, until downloaded new version of Flash player.  I have windows 7 Home premium 64-bit op system. IE 9

    read a lot of forums, tried to uninstall adobe using uninstaller from adobe website, I made this uninstall using 64 and 32-bit.

    so I would like to download the new version of adobe once again, using the 32-bit IE.  Works in youtube, but any other Web site that has the video, it still does not work. you get on other sites, just the sound, but no video, sometimes black bars and sometimes it flickers.  everything worked fine before that.

    I also have a brand hew computer hp laptop, with the new version, same op system, and flash player works well, you tube and other websites.

    Should I try to uninstall in Control Panel, remove the software?  He tried to update the graphics drivers, but he said that they have been updated.

    I'm not a user of technique, but I have read many forums and tried a lot of different things on this flag, and I still can't run on other sites - it works on the youtube site.  can someone tell me what I should try next?  Thank you

    monty866 wrote:

    clicking off the excelleration hardware not working anymore

    What is hardware acceleration on the parameters of Flash Player?

    If so, try to turn off rendering of IE9 material; See http://support.microsoft.com/kb/2528233 (the software instead of rendering using GPU rendering).

  • Custom using netStream video player not working not

    I have problems playing movies using the flash in a way that is not sinking tons of memory (http://forums.adobe.com/thread/851908). So, I tried to build my own, but I can't allow him to play anything... What don't I get on the netStream working with the VideoDisplay?

    customComponents package < code >
    {
    import flash.events.Event;
    import flash.events.NetStatusEvent;
    import flash.events.TimerEvent;
    import flash.media.SoundTransform;
    import flash.media.Video;
    import flash.net.NetConnection;
    to import flash.net.NetStream;
    import flash.utils.Timer;

    Import mx.core.UIComponent;
    Import mx.events.FlexEvent;

    / * Explanation of the component: VideoDislplayCustom is a replacement for s:VideoDisplay, because our load method in video memory leaks in the order of several hundred megabytes every time a new video has been loaded. It provides a video object that attaches to a netStream, which allows us to broadcast the video files on the hard drive to play rather than load them into the player. By preventing the caching of all kinds, overcome us the leaks memory of this magnitude and are a tool that can last throughout the day switching between videos often. */

    SerializableAttribute public class VideoDisplayCustom extends UIComponent
    {
    / * Constructor * /.
    public void VideoDisplayCustom()
    {
    Super();



    videoPlayer = new VideoDisplay();
    this.addChild (videoPlayer);
    this.addEventListener (FlexEvent.CREATION_COMPLETE, init)


    netConnection = new NetConnection();
    netConnection.addEventListener (NetStatusEvent.NET_STATUS, netStatusHandler);
    NetConnection.connect() (null);

    netStream = new NetStream (netConnection);
    netStream.addEventListener (NetStatusEvent.NET_STATUS, netStatusHandler);
    netStream.client = this;
    netStream.bufferTime = BUFFER_TIME;

    setVolume (defaultVolume);
    }

    / * Necessary, because we need allow all this time to initialize before you start trying to create certain things or parts of some components addressing.
    * Called from: this. Creation_Complete event that is raised after this component is all assembled. */
    private void init(event:Event):void
    {
    this.removeEventListener (FlexEvent.CREATION_COMPLETE, init);
    videoPlayer.visible = true;
    videoPlayer.source = "";
    videoPlayer.videoObject.attachNetStream (netStream);
    }

    / * Global variables * /.
    Define our constants.

    Time to buffer, in seconds. Subsequently assigned to the netstream object
    protected const BUFFER_TIME:Number = 8;

    Public variables.

    We must be able to define a source for our video player.
    public var source: String = "";
    Maintains the boot volume when the player starts, defined in terms of percentage of the total volume of the system.
    public var defaultVolume:Number =. 60;
    Because when we turn it off to save the previous volume. This wil enable us to check with our drop-down list component or other components to make sure that
    We have the right to 'lastVolume '.
    public var lastVolume:Number = defaultVolume;
    When we turn off our video, we know that she is mute. Checking to see if the volume 0 is accurate, not enough, so we have a variable for it. In addition,
    the s:VideoDisplay uses a variable 'muted', if we want to keep the same looking for outside like this component.
    public var muted: Boolean = false;
    When we want the video loop, you have to know that, so here is our Boolean loop. In fact, when we reached the end of playback, either deliver us
    a "complete" event, or we start playing again from the beginning. This value determines what.
    public var loop: Boolean = false;
    We need to know if we can soften the video or not (to improve the quality of reading).
    public var smoothing: Boolean = true;

    Private and protected variables.

    We need a video object to attach the netStream to. So, here it is.
    protected var videoPlayer:VideoDisplay;
    We must be able to access netConnection and NetStream objects from outside this component (to set the source and check on things), so here is our
    objects.
    protected var netConnection:NetConnection;
    protected var netStream:NetStream;
    We need to know if the stream is loaded or not before we can read.
    protected var loaded: Boolean = false;
    We need store metadata for the video that load us up, so here's our storage object metadata.
    protected var vidInfo:Object;

    / * Meathods of this component (aka public functions), visible to the whole program. */
    public void play (): void
    {
    Words of the var: String = «»
    If (!) Loaded)
    {
    netStream.play (source);
    load = true;
    } else {}
    netStream.resume ();
    }
    }

    public void pause (): void
    {
    netStream.pause ();
    }

    public void stop (): void
    {
    netStream.pause ();
    netStream.seek (0);
    }

    public void seek(timeToSeekTo:Number):void
    {

    }

    public void setVolume(volumeToSet:Number):void
    {
    var soundTransform:SoundTransform = new SoundTransform (volumeToSet);
    netStream.soundTransform = soundTransform;
    }

    public function mute (): void
    {
    if(!muted)
    {
    lastVolume = videoPlayer.volume;
    setVolume (0);
    Mute = true;
    } else {}
    setVolume (lastVolume);
    Mute = false;
    }
    }

    / * We store the metadata collected by the NetStream object, information so that we can him later in this program. This isn't really a meathod, but it
    * should be made public so that the NetStream could find it.
    * Called from: NetStream object, as soon as he gets the metadata and information loaded file. */
    public void onMetaData(info:Object):void
    {
    vidInfo = info;
    }

    / * Functions private and protected this component, closed to the rest of the program. */
    protected function netStatusHandler(event:NetStatusEvent):void
    {
    Switch (event.info.code)
    {
    case "NetStream.Play.StreamNotFound":
    trace ("Error. Stream not found: "+ source);
    break;
    case "NetStream.Play.Stop":
    Stop();
    break;
    }
    }

    < code >

    Any help?

    Here is the code for the component. I hope there is nothing odd about that. I have included my contact information at the top. Please send me an email me or Adobe PM if you have questions or comments about this code. Hope this helps someone. It took me a good while to tinker until I found this.

    You can also find this useful if you do not need to completely rebuild the component. http://bryanheisey.com/blog/?p=21

    [CODE]

    /* Contact info: Jordan: [email protected] between 2010 and 2015. */

/* The built-in video display object would not work for our purposes, because it would leak enormous amounts of memory (in the order of 200-300MB) every time a new
 * video was loaded in and played. It was almost as though it retained all previous videos played in memory, rather than replacing the video it had loaded.
 * After farther investigation, I believe it had to do with the fact that s:VideoDisplay discards the source and videoGateway, and creates a new one, meaning that
 * garbage collection has to get in there and fix it. However it doesn't unless RAM is also being lost in enough little chunks, so...it never cleaned up.
 * This is the first attempt to fix that, by directly manipulating the netStream, and streaming the video, rather than loading it in as was happening in s:VideoDisplay.
 * I have, however, followed the structure that was presented in s:VideoDisplay provided by Adobe in the Flex 4.0.1 framework as far as where events and public functions
 * and so forth are declared. This video player uses a lot of code and ideas from s:VideoDisplay and the player described at
 * http://www.flashwebdesigns.com.au/index.php/2010/07/custom-flex-4-spark-videodisplay. More details of what this actually is found right above the constructor. */

/* TODO: Looping pauses for a moment before restarting.
          */
package customComponents
{
     /* Imports:
      * NetStatusEvent is used to react to specific events in the video stream. For example, when it starts to play, when it stops, and so forth.
      * SoundTransform is a class used to control the volume in the NetStream, and so when the volume is changed, we need to use this to create a new sound handler for the
           stream.
      * Video is used as the gateway through which the NetStream is visible. That is actually it's only purpose, because we wind up directly manipulating the NetStream when
           we need to do anything with the video.
      * NetConnection is used to initiate our NetStream. NetConnection is looking for a server connection. When we pass through null as the server, it knows we're after
           local content.
      * NetStream is what actually plays the videos off the computer. This is the central piece of this component. Using this class as our primary piece of this component
           is what allows us to circumvent memory leaks and other issues.
      * UIComponent is what this component extends, so it's needed for the basis of our component.
      * FlexEvent is required to allow us to listen for creation complete, allowing us to call an init() function here like we do with almost every other component we have.
      * TimeEvent was the original type of event used in s:VideoDisplay, so working on changing as little as possible, we kept that as our event types, and by the time we
           finished, there was no point to changing it. */

     import flash.events.Event;
     import flash.events.NetStatusEvent;
     import flash.media.SoundTransform;
     import flash.media.Video;
     import flash.net.NetConnection;
     import flash.net.NetStream;

     import mx.core.UIComponent;
     import mx.events.FlexEvent;

     import org.osmf.events.TimeEvent;

     /* Events */

     /* complete is dispatched when the playhead reaches the duration for playable media.
      * original eventType: org.osmf.events.TimeEvent.COMPLETE */
     [Event(name="complete", type="org.osmf.events.TimeEvent")]
     /* durationChange is dispatched when the duration property of the media has changed.
      * This event may not be dispatched when the source is set to null or a playback error occurs.
      * original eventType: org.osmf.events.TimeEvent.DURATION_CHANGE */
     [Event(name="durationChange", type="org.osmf.events.TimeEvent")]
     /* needToSeek is dispatched whenever play() is called. play() loads in the new video. If the video is the same one that was already playing, therefore not changing the
      * duration, we need to catch that, and the easiest way to do that is just to dispatch an event commanding that we seek. */
     [Event(name="needToSeek", type="flash.events.Event")]

     /* Explanation of component: VideoDislplayCustom is a replacement for s:VideoDisplay, since our method of loading in videos caused memory leaks in the order of hundreds
      * of megabytes each time a new video was loaded in. This one provides a simple video playing object that attaches to a netStream, which we use
      * to stream the video files off the hard driver rather than loading them into the player. By disallowing caching of any kind, we overcome memory leaks of
      * that magnitute, and provide a tool that can last all day switching between videos often. */

     public class VideoDisplayCustom extends UIComponent
     {
          /* Constructor */
          public function VideoDisplayCustom()
          {
               super();
               // We want to have an init() function, so we listen for it's dispatch.
               this.addEventListener(FlexEvent.CREATION_COMPLETE, init);
               // We build the actual stuff that plays our videos.
               createUnderlyingVideoPlayer();
               // The next three lines ensures that code farther down will work. We compare durations in vidInfo, which is just an array, so we first need to give it a duration
               // value to compare (it's bad if we compare null to a number)
               var tempArray:Array = new Array();
               tempArray["duration"] = 0;
               vidInfo = tempArray;
          }

          /* We need to allow everything time to initialize before we start trying create some things or addressing parts of some components. Looking towards expandability,
           * also, this only makes sense to have.
           * Called from: this.Creation_Complete, which event is fired after this component is all put together. */
          private function init(event:FlexEvent):void
          {
               // since we added the event listener, we need to pull it off.
               this.removeEventListener(FlexEvent.CREATION_COMPLETE, init);
               videoPlayer.visible = true;
          }

          /* Global variables */

          // Define our constants \\

          // Time to buffer, in seconds, before it begins playback. Later assigned to the NetStream object. Since all our files loaded are on the local host, we
          // don't need to set this very high. And if we use a black screen, we can specify a minimum buffer size.
          protected const BUFFER_TIME:Number = 8;

          // Public variables \\

          // Holds the start volume when the player starts, defined in terms of percentage of total system volume.
          public var defaultVolume:Number = .50;
          // For when we mute, we need to save the previous volume. This wil let us double-check with our dropDown component or other components to make sure that
          // we have the right "lastVolume".
          public var lastVolume:Number = defaultVolume;
          // When we mute our video, we need to know it's muted. Checking to see if it the volume is 0 is not accurate enough, so we have a variable for it. Also,
          // the s:VideoDisplay uses a "muted" variable, and since we want to keep it looking the same from the outside as this component, we keep that variable.
          public var muted:Boolean = false;
          // When we want to loop the video, we need to know that, so here's our loop boolean. Basically, when we hit the end of the video playing, either we issue
          // a "complete" event, or we start playing it again from the beginning. This boolean determines which.
          public var loop:Boolean = false;
          // We need to know if we can smooth the video or not (to improve playback quality). Also something from s:VideoDisplay
          public var smoothing:Boolean = true;
          // We needed a way to carry through the height and width, and for some reason, this.width and this.height were both cleared and reset to 0 before the component is
          // created, or sometime during creation, so we needed to create these variables instead to carry it through. Breaks our "looking the same from outside" attempt.
          public var playerWidth:Number = 1024;
          public var playerHeight:Number = 768;

          // Private and protected variables \\

          // We need to be able to define a source for our video player. This would be a public variable, but that wasn't allowing for both playing the first video and the
          // subsiquant subclips, so we had to write getter and setter functions for the source, so we can maintain the previous source to know how to act. Thus, we have
          // our newSource and our oldSource.
          protected var newSource:String = "";
          // We also need to know if we have a new source loaded in, so this variable holds the old source.
          protected var oldSource:String = "";
          // We need a video object to attach the NetStream to. So, here that is.
          protected var videoPlayer:Video;
          // We need to have a NetStream to be able to use it, and to create one, we need to have a NetConnection. So, here they are.
          protected var netConnection:NetConnection;
          protected var netStream:NetStream;
          // We need to store the metadata for the video that we load up, so here's our metadata storing object.
          protected var vidInfo:Object;

          /* Meathods of this component (aka public functions), visible to the whole program. */

          /* This function checks our sources, and if they haven't actually changed, we don't want to reload the stream, so we just tell the hosing component (which for
           * us is the VideoScreenCustom component) that we need to seek. If we load in the new video (netStream.play(newSource), then we can't seek until the video is
           * actually loaded, and we can't always seek from the onMetaData functions below, so this seemed the best way to do it.
           * Called from: play() and playScreenSaver() in VideoScreenCustom.mxml. */
          public function play():void
          {
               if(newSource == oldSource)
               {
                    dispatchNeedToSeek();
               } else {
                    netStream.play(newSource);
               }
          }

          /* Pretty straightforward--we pause the video by pausing the netStream.
           * Called from: pause() in VideoScreenCustom.mxml. */
          public function pause():void
          {
               netStream.pause();
          }

          /* Pretty straightforward--we need to unpause the video where we left off, so we call resume() on the netStream to unpause.
           * Called from: resume() in VideoScreenCustom.mxml. */
          public function resume():void
          {
               netStream.resume();
          }

          /* We don't currently use this, because closing the netStream makes it hard to restart videos and seek, since it's still opening the stream when the seek command
           * is sent, and it stops the screen saver from working properly. It's just best to avoid closing our stream unless we are unloading it or something.
           * Called from: nowhere. This is a place holder / view into other uses. */
          public function stop():void
          {
               netStream.pause();
               netStream.close();
          }

          /* We need to be able to move around a video and to enter at different entryPoints, so seeking is vital. Here, we make it accessable from outside this component.
           * Called from: loopVideo() in this component, play(), rewindVideo() and fastForwardVideo(), and seekToPoint() from VideoScreenCustom.mxml */
          public function seek(timeToSeekTo:Number):void
          {
               netStream.seek(timeToSeekTo);
          }

          /* Function that mutes the video. When it is called again, it restores the previous volume.
           * Called from: set volume() below, and currently nowhere else. This is a place holder until that feature is requested. */
          public function mute():void
          {
               if(!muted)
               {
                    lastVolume = netStream.soundTransform.volume;
                    setVolume(0);
                    muted = true;
               } else {
                    setVolume(lastVolume);
                    muted = false;
               }
          }

          /* Getter and setter functions */

          /* Used by VideoScreenCustom to know what the current time in the video is so that it can rewind, fastforward (by passing through a new time to seek to), and so
           * we can watch for stop points in the video clips. */
          public function get currentTime():Number
          {
               return netStream.time;
          }

          /* Used by the videoScreenCustom to know if it is even possible to fast forward any (if within the skip interval from the end, then FFing is not possible). Also
           * here if ever needed for any other reason. */
          public function get duration():Number
          {
               return vidInfo.duration;
          }

          /* Since we're remembering both the previous and the current source, we need to specify that we are returning the newSource through this getter function.
           * Externally, this looks just like a public variable. */
          public function get source():String
          {
               return newSource;
          }

          /* Since we remember both the old and the current source, when the source is changed (.source = "somePath"), we need to copy the current source, then set the new
           * one so that we can use it in this to know whether to load the video or not (we don't want to load it if it is already loaded in and playing). Externally, this
           * looks just like a public variable.*/
          public function set source(sourceToSet:String):void
          {
               oldSource = newSource;
               newSource = sourceToSet;
          }

          /* From videoScreenCustom, we set the volume only through videoDisplay.volume=NUM. So, we handle all volume stuff here. It is possible to have the videoScreen
           * call mute() seperately in the future, so we add a little logic here to unmute if muted. Otherwise, we se the volume. */
          public function set volume(volumeToSet:Number):void
          {
               if(muted)
               {
                    mute();
               } else {
                    setVolume(volumeToSet);
               }
          }

          /* We store the metadata information gathered by the NetStream object, so that we can get to it later in this program. This isn't truly a meathod (meaning available
           * to the component hosting this one), but it had to be made public so that the NetStream object could find it. You'll note that we have too onSomeDate() functions.
           * The reason for that is that some video conatiners return one type of data (MetaData), and another returns a different set of metadata (XMPData).
           * Called from: NetStream object, as soon as it gets the metadata and information from the loaded file. */
          public function onMetaData(info:Object):void
          {
               var oldVidInfo:Number = vidInfo.duration;
               vidInfo = info;
               if(oldVidInfo != vidInfo.duration)
               {
                    dispatchDurationChange();
               }
               resizeVideo();
          }

          /*See above on onMetaData() for info about this. It does the same thing, but for different file formats (mostly flash-based containers). */
          public function onXMPData(info:Object):void
          {
               var oldVidInfo:Number = vidInfo.duration;
               vidInfo = info;
               if(oldVidInfo != vidInfo.duration)
               {
                    dispatchDurationChange();
               }
               resizeVideo();
          }

          /* Private and protected functions of this component, closed off to the rest of the program. */

          /* We need to build the essential pieces of the player and leave them in all the time. The basic concept for this player is that we have a Video object to
           * serve as a gateway for the NetStream object, which is what actually connects to the video file and passes it through. The Video object is just the reciever--
           * that means that all calls and commands that we want to deliver to the playing video we instead direct towards to NetStream.
           * Called from: the constructor function. */
          protected function createUnderlyingVideoPlayer():void
          {
               // create our Video object, attach it to the stage, and resize it (critical--since otherwise, both height and width would be 0).
               videoPlayer = new Video();
               addChild(videoPlayer);
               videoPlayer.width = playerWidth;
               videoPlayer.height = playerWidth;

               // NetConnection is needed to open the NetStream. When anything changes in this stream, we can handle those changes in netStatusHandler(). When we connect and
               // pass through null, it means that we have no server and the files will be hosted on the local box.
               netConnection = new NetConnection();
               netConnection.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
               netConnection.connect(null);

               // The main piece. Through this netStream, we control video playback, volume, and so forth.
               netStream = new NetStream(netConnection);
               netStream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
               // the client is who the NetStream turns to to find functions for it's events. There is one event that requires handling--the one that calls onMetaData
               // (or MXPData). It finds those functions in the client object.
               netStream.client = this;
               // How long it will buffer before it starts to play the video. Since we're on the local box, our buffer can pretty much be as low as we want.
               netStream.bufferTime = BUFFER_TIME;

               setVolume(defaultVolume);
               // Final step: attach the NetStream object to the Video so that the Video knows to pay attention and do something.
               videoPlayer.attachNetStream(netStream);
          }

          /* We need to change the size of the video to fit on the screen. However, it must be noted that sometimes, if it must be stretched too far, then video quality
           * becomes horrible, and so far, no workaround has been discovered.
           * Called from: onMetaData (of all kinds, including XMP and other types of metadata), called whenever a new video is loaded in. */
          protected function resizeVideo():void
          {
               videoPlayer.width = playerWidth;
               videoPlayer.height = ((playerWidth * vidInfo.height) / vidInfo.width);
               videoPlayer.x = 0;
               videoPlayer.y = ((playerHeight - videoPlayer.height) / 2);
          }

          /* In order to change the volume, we have to apply a new soundTransform object. So, here we create it and do that.
           * Called from: mute(), createUnderlyingVideoPlayer(), and the setter function set volume(). */
          protected function setVolume(volumeToSet:Number):void
          {
               var soundTransform:SoundTransform = new SoundTransform(volumeToSet);
               netStream.soundTransform = soundTransform;
          }

          /* For our screensaver, we needed to allow the video to loop. This function will handle that. The only problem is, since we wait for it to .Stop (see Called from:),
           * there is a pause between the end of the video, and when it starts over.
           * Called from: netStatusHandler for NetStream.Play.Stop */
          protected function loopVideo():void
          {
               netStream.seek(0);
          }

          /* We need to pay attention to what the NetStream is saying and react accordingly. Especially when the video ends. All NetStream andNetConnection events on
           * documentation at Adobe are listed as a comment at the end of the class (very end of this file).
           * Called from: the NetStream and NetConnection event when they spit out an event. */
          protected function netStatusHandler(event:NetStatusEvent):void
          {
               switch (event.info.code)
               {
                    case "NetStream.Play.StreamNotFound":
                         trace("Error. Stream not found: " + source);
                         break;
                    case "NetStream.Play.Stop":
                         if(loop)
                         {
                              loopVideo();
                         } else {
                              var playedTime:Number = int(netStream.time);
                              var totalTime:Number = int(vidInfo.duration);
                              // if we're within 2 seconds of the end, assume we're at the end.
                              if(Math.abs(totalTime - playedTime) <= 1)
                              {
                                   dispatchComplete();
                              }
                         }
                         break;
               }
          }

          /* Event Dispatching Functions */

          /* Sent out to let the hosting component (VideoScreenCustom) know that the end of the video clip has been reached.
           * Called from: NetStream's NetStream.Play.Stop event code, sent out whenever the end of the video playing through the stream is reached. */
          protected function dispatchComplete():void
          {
               var eventObj:TimeEvent = new TimeEvent("complete");
               dispatchEvent(eventObj);
          }

          /* When the new and old sources have different durations (meaning a new video has been loaded), this is called to let the hosing component know we have a new vid.
           * Called from: onMetaData (onXMPData), which is called whenever a video is loaded. */
          protected function dispatchDurationChange():void
          {
               var eventObj:TimeEvent = new TimeEvent("durationChange");
               dispatchEvent(eventObj);
          }

          /* When we don't have a new video, we still need to call seek() after the NetStream is aware that the video is the same. Or something. I'm not sure why, but we need
           * to seek after things have been set and run for a few microseconds. This is used for FFing, RRing, but mostly for seeking to a new "chapter" in a continuous
           * video during playback.
           * Called from: play() above. */
          protected function dispatchNeedToSeek():void
          {
               var eventObj:Event = new Event("needToSeek");
               dispatchEvent(eventObj);
          }

     }
}

/*
The following table describes the possible string values of the code and level properties.
Code property Level property Meaning
"NetStream.Play.Start" "status" Playback has started.
"NetStream.Play.Stop" "status" Playback has stopped.
"NetStream.Play.Failed" "error" An error has occurred in playback for a reason other than those listed elsewhere in this table, such as the subscriber not having read access.
"NetStream.Play.StreamNotFound" "error" The FLV passed to the play() method can't be found.
"NetStream.Play.Reset" "status" Caused by a play list reset.
"NetStream.Play.PublishNotify" "status" The initial publish to a stream is sent to all subscribers.
"NetStream.Play.UnpublishNotify" "status" An unpublish from a stream is sent to all subscribers.
"NetStream.Play.InsufficientBW"  "warning" Flash Media Server only. The client does not have sufficient bandwidth to play the data at normal speed.
"NetStream.Play.FileStructureInvalid" "error" The application detects an invalid file structure and will not try to play this type of file. For AIR and for Flash Player 9.0.115.0 and later.
"NetStream.Play.NoSupportedTrackFound" "error" The application does not detect any supported tracks (video, audio or data) and will not try to play the file. For AIR and for Flash Player 9.0.115.0 and later.
"NetStream.Play.Transition" "status" Flash Media Server only. The stream transitions to another as a result of bitrate stream switching. This code indicates a success status event for the NetStream.play2() call to initiate a stream switch. If the switch does not succeed, the server sends a NetStream.Play.Failed event instead. For Flash Player 10 and later.
"NetStream.Play.Transition" "status" Flash Media Server 3.5 and later only. The server received the command to transition to another stream as a result of bitrate stream switching. This code indicates a success status event for the NetStream.play2() call to initiate a stream switch. If the switch does not succeed, the server sends a NetStream.Play.Failed event instead. When the stream switch occurs, an onPlayStatus event with a code of "NetStream.Play.TransitionComplete" is dispatched. For Flash Player 10 and later.
"NetStream.Pause.Notify" "status" The stream is paused.
"NetStream.Unpause.Notify" "status" The stream is resumed.
"NetStream.Record.Start" "status" Recording has started.
"NetStream.Record.NoAccess" "error" Attempt to record a stream that is still playing or the client has no access right.
"NetStream.Record.Stop" "status" Recording stopped.
"NetStream.Record.Failed" "error" An attempt to record a stream failed.
"NetStream.Seek.Failed" "error" The seek fails, which happens if the stream is not seekable.
"NetStream.Seek.InvalidTime" "error" For video downloaded with progressive download, the user has tried to seek or play past the end of the video data that has downloaded thus far, or past the end of the video once the entire file has downloaded. The message.details property contains a time code that indicates the last valid position to which the user can seek.
"NetStream.Seek.Notify" "status" The seek operation is complete.
"NetConnection.Call.BadVersion" "error" Packet encoded in an unidentified format.
"NetConnection.Call.Failed" "error" The NetConnection.call method was not able to invoke the server-side method or command.
"NetConnection.Call.Prohibited" "error" An Action Message Format (AMF) operation is prevented for security reasons. Either the AMF URL is not in the same domain as the file containing the code calling the NetConnection.call() method, or the AMF server does not have a policy file that trusts the domain of the the file containing the code calling the NetConnection.call() method.
"NetConnection.Connect.Closed" "status" The connection was closed successfully.
"NetConnection.Connect.Failed" "error" The connection attempt failed.
"NetConnection.Connect.Success" "status" The connection attempt succeeded.
"NetConnection.Connect.Rejected" "error" The connection attempt did not have permission to access the application.
"NetStream.Connect.Closed" "status" The P2P connection was closed successfully. The info.stream property indicates which stream has closed.
"NetStream.Connect.Failed" "error" The P2P connection attempt failed. The info.stream property indicates which stream has failed.
"NetStream.Connect.Success" "status" The P2P connection attempt succeeded. The info.stream property indicates which stream has succeeded.
"NetStream.Connect.Rejected" "error" The P2P connection attempt did not have permission to access the other peer. The info.stream property indicates which stream was rejected.
"NetConnection.Connect.AppShutdown" "error" The specified application is shutting down.
"NetConnection.Connect.InvalidApp" "error" The application name specified during connect is invalid.
"SharedObject.Flush.Success" "status" The "pending" status is resolved and the SharedObject.flush() call succeeded.
"SharedObject.Flush.Failed" "error" The "pending" status is resolved, but the SharedObject.flush() failed.
"SharedObject.BadPersistence" "error" A request was made for a shared object with persistence flags, but the request cannot be granted because the object has already been created with different flags.
"SharedObject.UriMismatch" "error" An attempt was made to connect to a NetConnection object that has a different URI (URL) than the shared object. 

If you consistently see errors regarding the buffer, try changing the buffer using the NetStream.bufferTime property.

*/

    [/ CODE]

  • does not load any page as a commom user, works well as an administrator

    I've been running Firefox for centuries now, no problems previously.
    All of a sudden it does not load any page when I launch FF as a normal user. If I run FF as admin, everything works as it should.

    Hello Tyler.
    Thank you for your quick response.

    Unfortunally suggestions do not solve the problem.
    I discovered that it is in the antivirus (AVG). Once I turned off AVG, FF works as it should.
    One way or another AVG don't like FF.

    In retrospect, the problem started with the AVG Free upgrade to the paid version.
    I'll send moy.
    If the issue is resolved, I'll send another answer.
    SeeYou,
    Willem

  • Adobe flash player not working does not or does not appear as an application under Tools, options

    Adobe flash player not working does not or does not appear as an application under Tools, options

    If you can't Flash 11.3 to work and need to return to 11.2 Flash you can download Player Flash 11.2 through this direct link:

  • Sites http works is not on any browser, El Capitan

    My computer is only able to load websites https and not http sites I have cleared my cookies and cache DNS and it still does not work.

    You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

    Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

    Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

    VSearch malware tries to hide by varying names of the files it installs. To remove it, you must first identify the naming model.

    1 triple - click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

    /Library/LaunchDaemons

    In the Finder, select

    Go ▹ go to the folder...

    from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

    A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

    There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. The files that belong to an instance of VSearch will have the same date of change within about a minute, so they will be grouped together when you sort the folder this way, which makes them easy to identify.

    Search in the folder with the name of all these forms:

    com.something.daemon.plist

    com.something.Helper.plist

    com.something .net - preferences.plist

    Here, something is a string, which may be different in each instance of VSearch random meaningless. So far it has always been an alphanumeric string without punctuation signs, such as "disbalance" or "thunderbearer."

    You may have more than one copy of the malware, with different values of something.

    There may be one or more files with the name of this form:

    com.somethingelseUpd.plist

    where George can be an empty string of sense that something different. Yet once, there may be more than one file of this type, with different values of Gisele.

    Here is a typical example of an infection VSearch:

    com.disbalance .net - preferences.plist

    com.thunderbearerUpd.plist

    You will have files with similar names, but probably not identical to these.

    If you feel confident that you have identified the files above, drag only the files - nothing - to the trash. You may be prompted for administrator login password. Close the Finder window.

    2. open this folder as in step 1:

    /Library/LaunchAgents

    Move to the trash all the files with the name of the form

    com.something.agent.plist

    where something is one of the strings that you found in step 1. There may be not all of these files.

    3. If you have whatever it is moved to the trash in step 1 and step 2, restart the computer and empty the trash.

    Do not remove the folder 'LaunchAgents' or "LaunchDaemons", or anything else inside of one or the other, unless you know you have another type of unwanted software and more VSearch. Records are a normal part of Mac OS X. The terms "agent" and "demon" is a reference to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

    4 reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

    ▹ Safari preferences... ▹ General

    and click on

    Set on the current Page

    The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

    5. If you do not find the files or you are not sure about the identification, after what you have found.

    If in doubt, or if you have no backups, change nothing at all.

    6. the penalty may have started when you have downloaded and run an application called 'MPlayerX' or "PDF Pronto." If there is an element with a name in the Applications folder, delete it.

    This Trojan horse is often found on the illegal Web sites that traffic in content such as movies pirated. If you, or anyone else who uses the computer, visit these Web sites and follow the instructions to install the software, you can expect more of the same and worse, to follow. Never install software that you downloaded from a bittorrent, or which has been downloaded by someone else from an unknown source.

    In the aspect of security & confidentiality of system preferences, select the general tab. The marked anywhere radio button should not be selected. If this is the case, click the lock icon to unlock the settings, and then select an other keys. After that, do not ignore a warning that you are about to run or install an application from an unknown Director.

    Then, still in system preferences, open the pane of the App Store or software update and check the box marked

    Install the system data files and security updates (OS X 10.10 or later version)

    or

    Automatically download the updates (OS X 10.9 or earlier version)

    If it is not already done.

  • I keep seeing pop up ads powered by '' cn tatami '' whenever I have to navigate using Safari or open a link on the FB Adblocker app does not work for this. Any suggestions? There is no option to cross the pop-up ad that it redirects to various Web sites.

    I keep seeing pop up ads powered by '' cn tatami '' whenever I have to navigate using Safari or open a link on the FB Adblocker app does not work for this. Any suggestions? There is no option to cross the pop-up ad that it redirects to various Web sites.

    Cache and history of the site Clear settings - Safari -.

    (1232)

Maybe you are looking for