Satellite Pro L10: Question about saving the files on a CD

Similar Questions

• Satellite Pro L10 will not start the system

  Hello!

  I have a Toshiba Satellite Pro L10, which won't work for some reason any.

  The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

  It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

  There is also a 30 second countdown if I do nothing the portable samekh automatically.
  It is, none of these things work.

  Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

  He did about 50 times now and still nothing.
  I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

  Help, please!

  If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

  hope this makes sense and I gave you all you need to know.

  Thanks, B

  It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
  If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

  In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

• Satellite Pro L10 - question of replacement screen

  Hello

  I was wondering if there is a screen replacement out there that would be a compatible upgrade for my L10?

  Need something more high resolution ideally.

  Rgds
  Anno2

  Hello

  To my knowledge the Satellite Pro L10 uses a 15.0 "1024 x 768 TFT color screen.
  That is why each display 15 must be compatible with your laptop!

  If you are looking for a second hand display, I recommend checking out some online auction sales
  You might also find laptops second hand which also provide an internal display of 15.

  It would be an easier way to find a.
  The display is also one of expansive parts for laptop and in my eyes it s not worth it to buy a new game.

  But it's your choice...

• Satellite Pro L10: How to remove the user password

  Hello

  I work for a school and we have a bunch of laptops Satellite Pro L10. I put a supervisor on all laptops password think this problem would be solved (I didn't enter a password each time the machines are enabled), but one of our students seems to have found its way to the HWSetup utility in Control Panel and could save a user password on one of the laptops.

  Alarmingly there seems to be no way to clear the password of the user, even though I have the supervisor password. I can get the BIOS as a supervisor, but the definition of a user password option is grayed out. Can anyone provide a solution for my problem?

  Thank you

  Hello

  Well, I think that this problem could be solved by updating the BIOS to the version 2.60 or greater.
  But the problem is that the password has already been fixed.

  I read in the paper of Toshiba that all passwords must be removed before starting the BIOS updates.
  That's why I think it would be advisable to contact Toshiba service partner to remove first the user password, and then update the BIOS.

  You know it's very risky to update the BIOS of the device when the user or any password has been set.
  It of possible that the BIOS update procedure will be interrupted if the password exists.

• Satellite Pro 4600: Question about upgrade RAM, CPU, motherboard

  Hello

  I have a SP4600 and because I love this machine, I want to give him the chance to stay with me - but unfortunately, it will only work by increasing its performance...

  Is anyone here has made some experiences in upgrading a SP4600 more than 512 MB of RAM?
  I know that this machine uses PC100 SD - RAM that is available up to 256 MB.
  But someone has tried successfully to put in PC133 memory? And if so, to were the limit?

  And more: what about the upgrade of the rest, for example, the CPU or the whole motherboard?
  Currently, his heart beats with 700 Mhz (Celeron). Would it be as easy as just another graft?
  Or would it be easier to exchange the whole motherboard?
  I've never done anything like this before and I'm not sure how the rest of the system can react on these interventions, in particular because the we-board-video and sound on board...

  I would be delighted if someone could give me some positive feedback on these issues...

  Hello

  You can only use the memory 100 Mhz modules because the FSB is limited to 100 MHz.
  If you use 133 Mhz modules, they will work only at 100 Mhz.

  You can upgrade the satellite Pro 4600 until 512 MB (2x256MB)
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=28447&ft=m&St=3

  Other devices such as the CPU or GPU are not extensible and the motherboard may be replaced only with the same motherboard

  Finally, you should know that the laptop technology is a little different and you can't compare it with any desktop computer. You can update some parts such as the memory or HARD drive, but that s all the

• Satellite Pro L10 will not start - the LED blinks

  I have a pro l10 phone which, after sutting down as battery not return to life. All I get is 8 flashes on battery led when the button is pressed. It's the same area only, battery only or both.

  It sounds bad
  Generally, the laptop LED flashes as there might be a hardware malfunction.
  The LED provide a microcode and the technician can read this code.
  A common user is not able to read. OK maybe you can read it, but you will not find any description about the meaning of the code.
  That is why it s a good idea to contact the technician in your country

  But as a first step, try this:
  Remove the battery and unplug the AC adapter.
  Wait 20 - 30 minutes and then plug in the battery and plug in the AC adapter.

• Satellite Pro M10 Hibernate - error message "the file is not found.

  I have the Satellite Pro M10. I have problem in the power of Eve v6.00.04. When I want to activate the Hibernate mode it give a massage: * the file is not found. Please confirm the name of the specified file *.

  I can't use the hibernation mode. I tried to uninstall the Toshiba power saver and install again but the massage even come. If anyone has experienced the same problem and have a solution? Please advice

  When you active hibernating the operating system creates a file named hiberfil.sys in the root of your system drive.
  Of course, this file is missing in your installation.
  You can activate and disable hibernation in the system control-> power options.
  Disable hibernation, restart and enable again. Is there an error message? Maybe your C drive has insufficient free space?
  The size of the hibernation file is different from your main memory size.

• Satellite Pro A10: Question about upgrade HARD drive

  I want a bigger hard drive, but xp home edition preinstalled. If I change the hard drive I don't think that the recovery disc would work to re install xp. How can I do this without having to buy a new version of windows? Oh, it's a portable satellite pro spa10.

  Sorry, but why you are suggesting that the recovery CD will not recognize the new HARD drive?
  The fact is that if the BIOS will recognize the new HARD drive then you will have no problem for the recovery and the installation of the OS.

  If you want to upgrade the HARD drive, you must use a compatible. Then everything simply initialize-towards the top of the recovery CD and the operating system will install on the new HD disc.

• Satellite Pro A100: Question about vertical resolution

  Hello
  I just bought a Satellite Pro A100 a few weeks ago. I'm pretty happy with it, with the exception of the vertical resolution. I'm used to the small fonts and large resolutions. Well, it seems that the A100 is not capable of displaying more than 800 pixels vertically. Is this true?

  How can I run a vertical resolution greater than 800 pixels visible?

  Best regards
  George

  Hi George,.

  I think the A100 supports a maximum resolution of 1280 X 800 on its internal screen but can support a resolution of 2048 X 1536 on an external monitor attached.

  I don't think that you will be able to achieve a vertical resolution higher than 800 on the internal display.

  Kind regards

• Satellite Pro A10: Question about upgrading video card

  Hi guys, I have a laptop Satellite Pro A10 and I was wondering if anyone of you could help me.

  I want to improve my Ram card memory and video. The video card now is an Intel 82852/82855 GM/GME Graphics Controller and want a graphics card with at least 128 MB of memory on this subject.
  Any recommendation?
  Any help would be appreciated muchly.

  Hello

  It of not possible to change the graphics card. The graphics card is a small chip that attaches to the motherboard.
  This graphics card supports up to 64 MB shared memory. The graphics card gets this value of main memory if it s needed.

  The possibility to upgrade the memory of this device is something different.
  You can upgrade the memory to max 1024 MB (2x512MB) and these modules should work.
  PC2100 128 MB (PA3126U - 1 M 12)
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

  Hope this will help a little.
  concerning

• Satellite Pro 2100: Question about upgrade HARD drive

  Hello
  ICH have a Satellite Pro 2100 with a capacity of 40 GB HDD. Now I want wo upgrate with a 100 GB or 120 GB HARD drive. Is it supported? Where is the upper limit of the capacity of support? Is there something I need to look out? Are there special attributes that am I looking for?

  prior to thank you for your support

  Hello

  It is very unlikely that the 100 or 120 GB HARD drive works.
  I guess that the BIOS will not recognize these hard disks.
  I don't officials documents found on the hard drives supported, but I think that the 60 GB HARD drive is the biggest HARD drive that works on the Satellite Pro 2100.

• Satellite Pro A10 - question about a location empty in the lower corner

  Hello

  At the back of my machine looking for the back to the front, there is the first Panel to the right of the back that has the fan and processor in, then another in the middle which has a RAM memory. In the right in the front, there is a final, but it is empty, its has two sons, one white and the other black.

  What is this for? This allows to video memory upgrade? If this is not what is happening here.
  Any help appreciated.
  Ste

  I agree with danydemaeseneire.
  This property supports the minPCI wireless network card.

  The two wires must be connected as follows;
  The white cable be connected to the HAND and black to the auxiliary voltage

  Good bye

• Satellite A100-599 - question about updating the display driver

  Hello

  I have a Satellite A100-599 with a NVIDIA 7600go graphics card and I like most of you Bioshock game crashes because of some problems with the graphic card drivers, no pb... Meanwhile, NVIDIA has released some new patches for the Forceware and after I double checked the database of the Toshiba driver support I've seen a new version in the list of display driver for WinXp.

  One of them seems to be 13/09/2007. I have downloaded the drivers, installed them and then I checked the details of the driver in the Device Manager list and to my surprise the details say that the drivers are since 2006. I reinstalled the drivers and the same thing appeared. I checked the XML that was in archive of drivers and surprise... the drivers really are the 'old' of 2006. So my question is this: you have the display drivers for my model that work for Bioshock :D

  Best regards, Marian

  I Don t know if we. I think it would be took a long while to ask every single user: Hey, you have a few drivers for blackmodjo? Ah, come on, please. Some of them... ;)

  No, I have a better idea. It s like to cook a meal. Ingredients: DriverCleaner Pro and the www.laptopvideo2go.com site and... your your your TAAA patience

  To get a good 'bio' meal shocked just follow this recipe:

  Reach
  http://www.laptopvideo2go.com/
  read before doing anything (YES, even before you continue to BREATHE) the FAQ section on this site (RECOMMENDEDRECOMMENDEDRECOMMENDED)
  and then download the drivers. Do it, Yes...

  Then download drivercleaner by searching on www.google.com and THEN read their manual before doing anything else (Ok, you can continue to breathe..)
  After reading the manual you will be something like:

  1. program start, do something, restart the machine
  2. start in safe mode, from this program, deleting... yadayadayada
  3. install the new driver
  3. reading of Bioshock
  4...
  5. No... 6 thank. me and give me your first born... ;)

  So by cutting about 40% of my humorous things and following the constructive technical instructions from me, you will be able to play bioshock.

  Welcomes :)

• Satellite A60-106: Question about updating the BIOS and the BIOS Flash

  Fact the BIOS Flash update the BIOS or that requires a different file. I've updated a Satellite A60 BIOS to 1.9 but am not sure if cela flashed the BIOS as well.

  If this isn't the case, where I could get a file to Flash BIOS for satellite A60-106?

  Hello

  Sorry, but you question is a bit confusing.
  The update of the BIOS flashing the ROM module I put t know which version is installed before upgrading the BIOS, but if after the upgrade, a new version of the BIOS appears then the procedure was a success.

  The good BIOS and how to upgrade the BIOS information you will find on the page of Toshiba.

• Satellite Pro L100 - Question about BIOS password reset

  Hello

  I have problems with an old satellite L100 to request the password from the bios, which we do not know.

  I saw there are different ways of short connections to work around this problem, but I can't find anything about this particular model and none of the information I've seen applies to this motherboard.

  Can someone please help and direct me to what pins needs a short circuit on the laptop to be able to re - use this equipment.

  Many thanks in advance,

  Chris

  > old satellite L100 asking to specify the password of the bios, which we do not know.

  The password of BIOS bad new buddy is a kind of security mechanism that cannot be removed easily. The unknown BIOS password can be deleted only authorized Toshiba service
  This is why you must contact the ASP in your country to remove