Satellite Pro L300 have a UK keyboard layout but hit like a US layout

Similar Questions

• Satellite Pro L300 (PSLB1A) touchpad and keyboard problems

  One of my school L300 keyboard and touchpad stopped working after a months of normal use. It has been reported, and on the advice of our technician, I used the disc of the cure to reinstall everything back to the original state. However, this does not have the problem. Now, I need to go through the normal configuration screens and am required to enter a user name that I can't do! This means that I can not check the drivers etc. The keyboard works fine in the BIOS, but not once windows starts.

  Hello

  Set the default BIOS settings and try again.
  Starting installation of recovery can you use keyboard (arrows, ENTER) or mouse in the Toshiba Recovery menu?

• Realtek RTL8187B is not recognized Vista - Satellite Pro L300

  Hello

  I have a Toshiba Satellite Pro L300. It came with vista but I upgraded to 7.
  Now I have installed Vista with all the drivers but there is a problem, the wireless card does not work (RTL8187B) I get to a point that the Device Manager recognizes it, but says he has a problem.
  I downloaded several versions of the driver but nothing. If you could send me an earlier version of the driver or a vista recovery disk that I would be really grateful.

  Please help me that my only hope is to pray...

  I put t don't know what drivers you downloaded but please use portal Toshiba WLAN driver - http://aps2.toshiba-tro.de/wlan/

  He has to work.

  By the way: what type of problem is listed in the WLAN card properties?

• Shortcut keyboard Toshiba Satellite Pro L300 - properties will not end

  Dear lovers of Toshiba:

  This week, we have installed three new systems of Toshiba Satellite Pro L300 (two L300-153, a L300-156) with recovery media for Windows XP since the L300-156 product (no date on the disc, only two codes: CD 5 124624 and GMR400841EN0).

  The machines are beautiful and very effective, except for one problem: when the logout or shutdown Windows XP, the program called 'The Toshiba keyboard shortcut properties' does not stop automatically and opens a dialog "end program". The user may terminate the program immediately by clicking on the button 'End now' or wait until it to expire, after which the system disconnects or terminate normally.

  We noticed only after the installation of Service Pack 3 on all machines, so I don't know if the problem was present before SP3 has been applied. (We will be definitely check this on the following system and display the result.) Install the rest updates Windows with Service Pack 3 does not resolve the problem. Not more then that uninstall Toshiba Hotkey Utility by installing the package current, freshly downloaded from the Toshiba support area.

  A colleague suggested disabling startup programs. There are two likely choices for this purpose in the startup list + of + msconfig +: * thotkey * and * TFncKy *. Disabling either of these programs allows the disappearance of problem, but the functions of the * Fn keys are lost. The key functions are also lost when uninstalling the Toshiba Hotkey Utility.

  My question is of two parts:
  # Comment this problem be solved permanently, or circumvented (other than to say the customer never disconnect & close always the cover to hibernate)?
  # If there is no solution yet, how can a bug report situate with Toshiba, so I can get them the information they need to solve this problem and establish the responsibility?
  I will continue to post new information here that I acquire until a permanent solution is reached.

  Although this problem seems trivial and 'cosmetic' it's always awkward having to provide new machines customers with such an obvious flaw. It ourselves and Toshiba look bad, especially after that we sold the idea that people avoid problems of this kind to choose a Windows XP on Vista platform.

  Thank you, Robert Phair
  Director.

  > when the logout or shutdown Windows XP, the program called 'The Toshiba keyboard shortcut properties' does not stop automatically and opens a dialog "end program"...
  > We noticed only after the installation of Service Pack 3 on all machines, so I don't know if the problem was present before SP3 has been applied

  Problems could be caused by Win XP SP3. I've read several times that SP3 could be not entirely compatible with drivers or 3rd tools
  So I guess there is a problem of compatibility between the exe and SP3 files.
  By the way; SP3 is not completely released and updated test!

  I installed SP3 for some tests on my old non-Toshiba laptop and my work LAN card didn't so it of really possible that SP3 causes this.

  > There are two likely choices for this in the msconfig startup list: thotkey and TFncKy. Disabling either of these programs, the disappearance of the problem, but the functions of the Fn keys are lost

  It is clear that the thotkey and TFncKy files belong to applications that control the FN keys, SO if you would disable this in msconfig then buttons would not work.

  So, a solution might be a removal of SP3 System.
  In addition, you should try to clean the registry and operating system using the free tool like CCleaner.

  > Hope to get a response from an engineer from Toshiba, if there is no monitoring of this forum.
  I hope this too, but it seems that this forum is only a user forum.
  So if you want to report this behavior for laptop, contact the Toshiba ASP in your country

  See you soon

• Satellite Pro L300 - keyboard and touchpad issues

  Hello

  I just baught my GF a PC Toshiba laptop refurbed for his 21st birthday from a reliable source, it's a Satellite Pro L300.

  I started it until all the setup stuff, me there only to find that the keyboard and the touchpad work not AT ALL.
  The keyboard caps lock key is not even lights up when I press it.
  I downloaded all the latest drivers for EVERYTHING Inc. the touchpad, it makes no difference.

  I'm quickly running out of ideas and come to accept the fact that the keyboard and the touchpad is maybe defective and therefore evil must give my GF a defective laptop for Denise 21st, not happy :(

  Any1 have any ideas?

  Thanks :)

  Edit: OK, OK very strange, after that I sent this message, I tried the keyboard once more and it works fine?
  Could this be something 2 do with the download of the VFR package?

  The touchpad is always tired, even when I try the fn + f9 combo?

  2nd edition: Ok now the keyboard stopped working again!

  ON EARTH!

  Hello

  Looks like a keyboard problem. who knows why it doesn t work looks like something would be wrong
  I recommend you visit your dealer and replacement request
  Otherwise, you may contact the ASP in your country for a fix

  I think it's everything you could do

  Good luck

• Satellite Pro L300-1AD - mapping of the keyboard in the BACK

  Satellite Pro L300-1AD. Windows 7 Professional

  "When you use edit.com to write batch files the ' ' ' on shift2 key and the ' @' shift @ are transposed.
  They work correctly in word and invite him to command, but not in edit.com.

  Any ideas how to fix this please?

  Hi mate

  Have a look here:
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/15633817-521C-4e05-B09D-3a3069ff62ac

  Maybe it could be useful

• Satellite Pro L300 will not start

  I have a portable Satellite Pro L300 and he won't start (in other words the power button and not going not past the first screen).

  Works for keyboard, but F2, F8 or F12 will not do anything, I can't here the disk hard powerup but it's like no one is at home. I don't know if it's the motherboard or the onboard battery. The computer is about 7-8 years

  Can anyone help.

  It s certainly nothing wrong with a RTC battery (as you said internal battery).
  The RTC battery can be charged. The unit must be turned on and adapter must be connected at least for about 18 hours.
  But I guess that this isn't a problem.

  The laptop does not start because of a hardware malfunction, but it's hard to say what role may be affected. But you should absolutely consult the RAM modules.
  This should be the first step, since the RAM modules are easy to replace.

  All other parts should be checked by the type of service.

• Problem with some keys on Satellite Pro L300

  Hello

  I have a problem with the keyboard on my Toshiba Satellite Pro L300. I can not type 'a', 'q' and 'z '.
  ESC, F1, tab and Caps Look are also don't work.
  I don't spill any liquid on my PC. Need help please, I don't know what to do. Thank you

  You have the latest model of laptop. If there is a problem with the hardware keyboard will be replaced free of charge.
  I recommend you contact the nearest authorized maintainer and ask for help.
  With diagnostic programs, they can check the functionality of the keyboard, and see if the keyboard needs to be replaced.

• Satellite Pro L300 1AI LCD screen backlight not working not

  Hi all

  I have a Satellite Pro L300 1AI running Windows Vista the computer starts and works fine but the backlight on the screen doesn't seem to work.

  Y at - it none of the Vista settings that can affect this (other than the Fn key command on the keyboard and settings) in Control Panel? Strangely, it seems to have happened since I installed Skype but I don't see how this could possibly affect it.

  Any help is much appreciated...

  Hello

  What s wrong exactly? Brightness screen laptop s is too low?
  Everything you see on the screen as behind a thick fog?

  Well, usually the FL Inverter control the backlight of the screen and if the FL inverter starts to malfunction, so you would get the problem like this.

  There is no alternative to replace this inverter FL.
  It s a small part behind the frame of the screen I think that it s a job for a technician in ASP.

  Welcome them

• No driver audio for Satellite Pro L300 - Vista in function

  Hello world

  I just bought a Toshiba Satellite Pro L300, I have a system dual boot Vista - Ubuntu.
  I have problems with ubuntu - after about 6 hours to get etc wireless keyboard shortcuts to work.

  So I deleted the Ubuntu partition.
  I log back on Vista (no dual boot now), everything is fine with Vista except that it says there is no audio driver.
  So I get my drive recovery off load a fresh Vista on the same problems.

  Does anyone think they can help?
  Blake was soon.

  Hello

  You mean you used the recovery disc Vista Toshiba and redefine the laptop to factory settings, but the sound is still not available?

  Hmm. This strange boyfriend
  Check Device Manager and remove the sound card in the list of devices.
  Restart the computer, and then reinstall the audio driver that is on the page of the Toshiba driver.

  Check it out and please inform us of the results

• Satellite Pro L300-152 lose the power connector - how to disassemble it?

  I have a Satellite Pro L300 - 152 unit, which is out of warranty.
  I have a bad power connector, it has been pushed back and be dislodged from his seat or brocken cradel is within the computer.

  I am trying to remove the back to see if the power connector can be repaired or remains in its cradle.
  I removed all the screws and all devices, but can not get it off the computer.

  There seems to be something with the keyboard, which I took.

  Can you help me?

  To fix the power connector the whole notebook must be disassembled and you must have access to the motherboard. Disassembly procedure is not complicated if you have maintenance manuals and instructions.
  To have full access to the motherboard, you must remove all the screws from the underside and also all the screws under the keyboard. You will then be able to separate the notebooks and disassemble the upper.

  Tell me exactly what you have removed so far?

• Satellite Pro L300 - USB card reader does not support the 64 GB

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Posted by Trees
  

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Hi, here is a link to not detected by the PC card reader:
  http://KB.SanDisk.com/app/answers/de...CTED-by-the-PC
  You can take a look, hope it will be useful to you.

• Satellite Pro L300 keeps closing

  I have a series of satellite Pro L300 running Windows Vista Business and have problems with him closing by itself without known reason, then it restarts only sometimes.

  The startup repair does nothing.

  Hello

  I think it might be related to high temperatures.

  Have you noticed a hot air coming from vents?

  Usually the laptop stops automatically to avoid that the pieces of equipment against damage.

  So you need to check if the vents are clogged with dust and debris in most cases you can remove it using a jet of compressed air.

• Problem with satellite Pro L300 Ethernet controller

  Hello

  I have a Satellite Pro L300 (PSLB9A - 02L 001). Have'nt after being on the dial for the year last I was wireless (it worked well before that) but am now back on broadband but I don't seem to have any wireless.
  Checked the Device Manager and there is a yellow exclamation next to the ethernet controller and it seems there is no pilot, but apart from that, there is no further details. I tried to update the driver but it cannot find the driver on my computer and it will not search the Internet for this.

  I tried, but none of the drivers I downloaded seems to work...
  At the back of the computer laptop is a sticker - PA3613U-1MPC, I think it's the wifi card that is missing the driver but I can't find a driver for it for the life of me...

  Any help would be wonderful.
  Daryl in New Zealand

  You are right. This part number is WLAN Card. I put t know what operating system you use but for download driver Atheros http://aps2.toshiba-tro.de/wlan/?page=downloads WLAN

  I hope this will help.

  What is now with LAN driver? Do you need it too?
  In any case, visit the Toshiba support page under http://www.mytoshiba.com.au/support/download and there you should find good LAN driver for your model of laptop.

  Send comments.

• Satellite Pro L300 - cursor black screen flashing

  Hi all

  I have a Toshiba laptop Satellite Pro L300 Vista.

  The customer earned him in because when it starts it goes to home Toshiba screen then goes to a black screen with cursor flashing at the top left. I connected external monitor with the same result. Swapped RAM as well.

  Have run Memtest (spent), Seagate HDD long test (past), Ultimate boot CD and Winternals without success.
  * F8 does not work * and no more than the resumption of the plant.

  Can enter the BIOS F2 and F12 no problems and the HARD drive is listed.

  I reinstalled Vista on CD and on reboot it goes back to blinking cursor. I tried booting from the Vista CD repair and system restore. FixBoot commands and FixMbr prompt as well as with the same result.
  I feel that it may be a corrupt CMOS sensor? It's like the OS installs correctly, but the computer loses his memory on reboot where the operating system?

  Is the battery CMOS easily accessible and removable on this model?

  Has anyone experienced these symptoms? Is - fixable at lower cost?

  Hello

  If you have clients, I guess you're a technician and hope you have a few pieces of equipment in your store.
  Have you tried to set the BIOS to default settings and check again?
  If possible try to exchange the HARD drive and test the functionality again.
  You can use laptop with Linux live CD (HARD drive not required)?

  To be honest that I think n problem t is ORGANIC and, in my opinion, the exchange of the CMOS battery is not necessary.

  Please test it with the new HARD drive and post comments.