Satellite Pro L300 (PSLB9E) - need to wireless network drivers for Server 2003

Similar Questions

• Satellite Pro L300 - PSLB9E - cannot turn off wifi except for by Win 7

  I installed Win7 64 bit with a custom installation (replacing 32-bit Vista). I have updated all drivers (to my knowledge) and BIOS to 2.1. The wifi is always enabled, any position of the switch on the front or the combination Fn + F8. I can unplug a wifi service in the network Panel Win 7. This may seem like a good problem to have, but the power gets used when on battery. Obvious pointers? I can't follow up? Thank you very much.

  You can likely install toshiba value added package for win 7 if it is available.
  I also have the same problem with mij L40 pro and value pack for Windows 7 will not install on my laptop.
  Maybe it wil last updated in the future.

• Re: Satellite Pro L300 PSLB9E - Win XP WLan need driver

  I have a toshiba Satellite Pro L300 PSLB9E

  It came with Vista, but today I installed windows xp.
  I managed to find all hardware except for the wireless driver drivers.

  Please can someone direct me to the correct drivers?

  Thank you

  Hello

  I think you should test the Realtek WLan driver.
  You can find directly on the Realtek site.

  Test it!

• Driver XP SATA for Satellite Pro L300 PSLB9E

  Hi all I have a Toshiba Satellite Pro L300 PSLB9E and I am trying to downgrade from Vista to XP. I have the sata AHCI controller mode, I looked for this drivers on the toshiba site and the site of intel, but none of these work when installing xp and pressing f6 when you use a usb floppy drive. Any ideas?

  Hello

  If you have set the compatible SATA mode in the BIOS, then you n t need to install all the drivers SATA!
  Compatibility mode allows you to run the HARD drive without SATA drivers.

  But if you want to use the HDD in SATA mode, then you will set back to AHCI.
  In this case the SATA drivers must be installed in order to use the HDD in SATA mode.

  The laptop seems to be equipped with the AMD CPU and so you need a SATA chipset AMD driver. That are in the package of graphics (record SBDrv/SATA") driver

  Welcome them

• SATA for Satellite Pro L300 PSLB9E

  Hello

  After reading almost all threads talking about it, I know that I need a driver for my chipset, but Satellite PRO L300 PSLB9E what controller use exactly?
  How can I see what it or could someone tell me?

  For example, I have this list.
  Which one should I install? Where can I find it?

  http://img408.imageshack.us/img408/4671/sata2um9.jpg

  Lot of thanks and sorry for the mistakes, I am not very strong in English

  You need to install the SATA drivers before you install Windows. If you have two options:

  1 copy the drivers on a floppy disk. After that, you start from the Windows CD and press F6 to load drivers.

  2 do. you a new installation with nLite disc. Search forum, there is a lot of discussion on this topic.

  If you have problems to do this, ask here in the forum. ;)

• HP pavilion 15 t-ab100: wireless network drivers for windows 7

  I got my windows laptop 10 a few days ago. I worked on getting windows 7 works since then. The last step I think I need is the network drivers. I tried 4 which did not work. If someone could sort me I would appreciate it.
  
  Here's my laptop
  http://store.HP.com/us/en/PDP/laptops/HP-Pavilion-15T-laptop-m7h64av-1?JumpID=oc_r1002_usen_c-001_r0...
  
  and here's my driver network ID
  PCI\VEN_10EC & DEV_8179 & SUBSYS_804B103C & REV_01
  
  I've already tried this driver but it didn't work http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_134477_1

  Try this Realtek driver:

  http://ftp.HP.com/pub/SoftPaq/sp65001-65500/sp65183.exe

• Satellite Pro refuses to connect to wireless networks

  Hi guys! I need your help!

  My laptop Satellite Pro has suddenly decided to refuse to connect to wireless networks.
  all except my home router from the sky.

  I have moved since and am not able to connect to the free public Wi - Fi.
  No error message; Just click to connect to a particular network and nothing happens.

  I've been back home since and it connects automatically.
  I have Windows 8 and have not been able to find any trace of the Sky network to deselect etc.

  Any ideas?

  CAL

  > I've been since back home and it connects automatically.
  This means that you can connect to your WiFi network at home without big problems?
  This indicates that s laptop WiFi connection works correctly.

  I put t know what Satellite Pro, you have exactly, but have you checked if you can update the WLan driver?

  What happens if you change the Wlan standard? (802.11 a / B / G or N)
  This can be changed in the Device Manager-> card WLan-> properties-> Advanced tab

• Satellite Pro A40 fell on the wireless network card; Damaged PCMCIA slot

  This morning my Satellite Pro A40 (Celeron 2.6) fell 40 cm. He fell right on the wireless network card that has been inserted. This card is still alive and so is the rest of the laptop, but the PCMCIA location is little damaged. I can insert PC cards almost completely, just the last piece (when the pins are) wrong.

  I removed the cover near the CPU, and there, I could see the inside PCMCIA slot; I could see the main part and the last part where the pins are. That little part as is pushed upward, as you can see in the pictures.

  I think I'd be able to fix myself this PCMCIA slot, but I can't remove it. I removed all the screws on the rear plate, but he is still blocked.

  Pics:

  PCMCIA slot

  The PCMCIA location; on the left, you will see the part with the pins, which is pushed upward. It's also what I see when I look at the pins in the PCMCIA slot. as they are pushed down, but I don't think they are folded.

  Wireless network card

  Wireless network card; It is a little damaged but it still works.

  Does anyone have an idea how I can remove the back plate, or another way to remove the PCMCIA slot and fix it?

  Hi Steve

  Well, I can give t well you not answer how you can just remove the PCMCIA slot.
  There are a lot of screws and to my knowledge, it is necessary to remove all covers and screws that are placed at the bottom of the unit and inside under the keyboard.
  Please check this specific device. Perhaps you have overlooked a few screws.

  But if it is impossible to remove the PCMCIA slot of the unit, I recommend to ask the service partner for a detailed instruction.

  Good luck

  Good bye

• Satellite Pro L510 cannot access my wireless network

  The laptop recognizes wireless networks are available but requires a 'logon domain' with my user name and password.
  Where can I find the logon domain? What is it?

  Hi mate

  I don't know how you are trying to connect to the WLAN, but generally you n t need no user to connect to the WLan router password.

  You need, it's the right SSID (wireless network name), Wlan encryption right and good WiFi encryption password.

  First of all, ensuring that the WiFi network has been successfully activated!
  Key combination to select Wlan using FN + F8!
  Also read the manual of use of laptops for more details how to enable the Wlan!

  Then, you must configure the Wlan router every router supports a configuration different procedure but normally you should always have a manual with your router.
  There should be a step by step instruction how configure it!

• Satellite Pro A200 PSAFCA: need driver Lan and screen for XP

  Hey

  Please help me!

  I just installed XP on my new satalite pro, but I had trouble with the drivers.
  For the moment, I installed most but from this site, I can't seem to find a driver that will help my network card, or my video NIVIDIA player...

  any suggestions would be very valuable

  The Satellite Pro A200 PSAFCA is unclear to me. I know the PSAE1, the PSAE4 and the PSAE7Satellite Pro A200. So could you please confirm your Pro A200 series?

  If you do not find only XP drivers on the Toshiba page I would recommend checking the LAN and graphics chip installed on the motherboard and use drivers XP from the manufacturing of the chip.

  If you need a graphic driver, I advise to use the drivers from the site www.omegadrivers.net or www.laptopvideo2go.com

  Concerning

• Pavilion 17-g003nm: wireless network drivers for Pavilion 17-g003nm

  Hello

  There are no working drivers for the controller network and ethernet on the pages of HP support for the object model for windows 7(64bit)

  Posted there are drivers for realtek and this model has broadcom contoller

  model REF:

  N1J76EA

  Network Controller ID:

  PCI/VEN_14E4 & DEV_4365 & SUBSYS_804A103C & REV_01

  Ethernet ID:

  PCI/VEN_10EC & DEV_8136 & SUBSYS_8094103C & REV_0A

  Please if anyone can help...

  BR,

  Hrvoje

  Hello:

  You need these drivers...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_145419_1&swEnvOid=4058

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_143277_1&swEnvOid=4058#tab1

• G7-1150us: wireless network drivers for laptop G7

  Hello

  I need to get the drivers of network etc in order to connect to the internet.

  In my view, there are many examples of this, but I have still problems getting my computer to recognize everything I install, which means that I have to install the incorrect drivers.  What is mind someone give me some links? Thank you.

  Windows 7 Professional (64 bit)

  G7-1150us

  Here is the hardware ID:

  Ethernet controller
  PCI\VEN_10EC & DEV_8136 & SUBSYS_166A103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_166A103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  Network controller
  PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C & REV_00
  PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C
  PCI\VEN_1814 & DEV_5390 & CC_028000
  PCI\VEN_1814 & DEV_5390 & CC_0280

  PCI device
  PCI\VEN_10EC & DEV_5209 & SUBSYS_1666103C & REV_01
  PCI\VEN_10EC & DEV_5209 & SUBSYS_1666103C
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

  PCI Simple communications controller
  PCI\VEN_8086 & DEV_3B64 & SUBSYS_166A103C & REV_06
  PCI\VEN_8086 & DEV_3B64 & SUBSYS_166A103C
  PCI\VEN_8086 & DEV_3B64 & CC_078000
  PCI\VEN_8086 & DEV_3B64 & CC_0780

  Hello:

  You need these drivers...

  Ethernet controller

  The local area network (LAN) Realtek driver file name: sp55031.exe

  Network controller

  File name of card Ralink WiFi 802.11 b/g/n: sp56942.exe

  PCI device

  Realtek Card Reader driver file name: sp55030.exe

  PCI Simple communications controller

  Intel Management Engine Interface (MEI) driver file name: sp52795.exe

• Laptop HP 4530 s: wireless network drivers for hp 4530 s windows 7 ultimate 32 bit

  Hi guys,.

  I really need help here. I tried the wireless drivers for my notebook without success.

  I formatted it and loaded with windows 7 ultimate 32 bit, get this off message "WLAN".

  Help, please

  Thank you

  Hello:

  You need this driver for this model of the wireless card:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060882&swItemId=ob_105197_1&swEnvOid=4053

• Satellite Pro L300 PSLB9E: 100Mbit instead of connecting to the network local 1000Mbit WinXP

  Downgraded to WinXP.
  Have downloaded all the drivers available from Toshiba support, but still cannot get the speed of 100Mbit connection. I guess it's an another downgrade of the bios needed to support the XP operating system?

  Hello

  Your laptop supports Ethernet 10/100 Base-TX.
  This means that the network card supports the standard of 10 Mbps and 100 Mbps.

  I put t know why you expect at a higher speed, but the 100 Mbps is the maximum value for this chip to Base - TX LAN Realtek 10/100

  Welcome them

• Satellite Pro L300 PSLB1E - can I use the Bios for PSLB9E update

  Hi guys

  IM wondering if I can Flash my computer model toshiba laptop as in description with the following bios version

  PSLB9E Bios Version 2.20

  that is my current version

  PSLB1E Bios Version 1.50

  the question is - what the hardware is the same I'm sure that

  but will it work ok with this bios version?

  Thanks for any help

  Hello

  The question is: why you want to update the BIOS?
  Is there something wrong?

  As you know, the BIOS update is a sensitive technique.
  My laptop works with old BIOS and I did not upgrade to update even if the new version has been released I didn't update because my camera is ok.

  However, it seems that the two series are similar, but I think there are still some minor differences besides the BIOS update should not continues if the wrong version would be selected