Satellite Pro L300 - required external power supply (power car)

Similar Questions

• Satellite Pro L300 - is there an adapter available car?

  I said that I can't buy an adapter for the laptop above.

  Is this correct?

  Hello

  Really?
  I think that there should be a consistent car for this series adapter
  As far as I know the laptop adapter supports (19V, 3 42A 65W)

  I didn t find a special drive to Toshiba for this device adapter, but you might check out 3rd parts.
  Google for + car adapter for laptop Toshiba - 120W, 19V, 6.3 +

  This should be compatible

• Plug loose in Satellite Pro L300

  Satellite Pro L300.
  The power supply plug "toggle" in this position.
  It does not take much more.

  Computer never abused. My use only. 2.5 years. 5th PC toshiba laptop.
  Could not find anything to let me know how difficult a fix that would be.

  Sometimes, it does not record as being "plugged in" and back to the battery.

  Can anyone help?

  Hello

  Generally, it depends on the type of motherboard.
  In most cases, the power supply is a part of the card mother and soldered on the motherboard.
  But I've seen many boards of directors where the power plug was diving, can be deleted.

  However, the problem is that the portable whole you must remove to access the motherboard and in the seizure of power, and it's really delicate and crazy, hard work.

  I think that except the small problem with the power supply plug, the laptop is ok and I think you should ask a technician for laptop in order to solve this problem
  I don t recommend disassemble the laptop to hand clean because it s not worth risking damage to the motherboard, you know
  I have to pay a small fee to get the laptop repaired...

• Power supply adapter new satellite Pro L300-12Y

  HI, I have a laptop Satellite Pro L300-12 years and my adapter is beyond saving. Were can I get a new one? I couldn't find any so I ask you directly

  Hello

  You can order a new adaptor AC to a Toshiba ASP in you country.
  You can also check the reference number of the old power adapter and can perform a search on the internet using this part number for a replacement part.

  Welcome them

• Satellite Pro L300 - use of the power cable between the countries

  I'm buying a Toshiba laptop Satellite Pro L300 T4200 everything here in New Zealand, where I will be staying for the next six months. However, I'm heading back to Alaska (United States) in April.

  Someone could answer my concerns about the use of power cables and to buy once back in the States. for the most part is it safe to use a USA power cable in this laptop bought NZ without breaking something to bits?

  THX, kim3300

  When you return to the States, I think that you must travel kit adapter power supply only.
  I recommend you consult your dealer and gathering information that it will be the best for you.

• Satellite Pro L300-PSLB1E: XP does not control the wifi to the power connection

  * + Hello + *.

  I have a model Satellite Pro L300-PSLB1E and a XP Professional SP3 on it.
  Already everything works because I had a compilation of drivers copy of the past.

  The problem is that XP does not control the WiFi works without danger the and it disconects when I close the lid.

  So I tried with the power that said safety program to:

  Bq. [06/04/08 Power Saver Toshiba Windows XP 7.04.02I | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpwrsav-es-20080519173239.zip] + doesn't work-error 0 x 0 +.
  And I tried also with the thought of program Toshiba wifi on 32-bit compatibility:
  Bq. [Intel PROSet/Wireless Software | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpro-ncs-20080416140552.zip] + doesn't work too-Said controller is not installed when you and full work +.

  So, how to control the peripheral power turn off on?

  Bq. * + thanks for your attention and patient. + *

  Hello

  Firstly the Toshiba Power Saver requires the installation of the common Module.
  The common Module for Win XP v1.00.05 can be downloaded from the European pilot page Toshiba.

  So before installing the energy saver, install common Module, restart the computer, and then try the energy saver.

  In addition the Intel PROSet/Wireless Software can be used only with the Intel Wlan card.
  Is the laptop supports the Intel wireless network adapter?

  AFAIK the L300 series can be equipped with a Realtek, Atheros and Intel Wlan card
  Check it!

• Satellite Pro L300-152 lose the power connector - how to disassemble it?

  I have a Satellite Pro L300 - 152 unit, which is out of warranty.
  I have a bad power connector, it has been pushed back and be dislodged from his seat or brocken cradel is within the computer.

  I am trying to remove the back to see if the power connector can be repaired or remains in its cradle.
  I removed all the screws and all devices, but can not get it off the computer.

  There seems to be something with the keyboard, which I took.

  Can you help me?

  To fix the power connector the whole notebook must be disassembled and you must have access to the motherboard. Disassembly procedure is not complicated if you have maintenance manuals and instructions.
  To have full access to the motherboard, you must remove all the screws from the underside and also all the screws under the keyboard. You will then be able to separate the notebooks and disassemble the upper.

  Tell me exactly what you have removed so far?

• Satellite Pro L300 - Display works only on the external monitor

  I received my new Satellite Pro L300 tonight & followed the instructions one by one. Although the power etc. lights were turned on, I had no monitor display at all. I then plugged on my old pc monitor who * fact * work. I tried pressing Fn + F5 but still nothing on the screen of the laptop?

  Thank you, Adam.

  I think you need to bring your laptop to an ASP. They can check your laptop and exchange all necessary parts.
  I think that your laptop is under warranty, if the repair is free for you :)

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• Satellite Pro L300-152 - unable to connect to TV, projector or a external monitor

  Hello
  Peuvent some please help?

  I bought a Satellite Pro L300-152, model without PSLB1E-01R015EN with Vista 32 bit a few months ago to replace an old Toshiba laptop not.

  The problem I have is that I can't connect external devices such as TV, projector, or a monitor.
  I used another laptop in the past with my TV and projector and have had no problems at all. I connected via the VGA port, as it is the only port with the exception of USB. Using a VGA cable, I tried all the settings that I have used in the past, but with no joy.
  I did the setting in the display settings and the FN + F5, but nothing comes up on the external screens except no signal.

  I tried to solve this problem for months and need help, please.

  Thank you
  Karl

  > When I try to update the bios driver I get a message: insydeflash the virsion or ROM file is not newer than the version of the BIOS?

  Strange what s... what version of BIOS is installed on your laptop?
  As much as I know at this time the European Toshiba page provides the version of 1, 50 - WIN update of the BIOS for this model of laptop.

• Re: Satellite Pro L300 - no signal VGA on an external TV

  I have a satellite pro L300. When I connect to the TV using a VGA cable I can't get a signal.
  When the PC starts the Toshiba Logo appears on the TV screen, then microsoft appears, but then the only thing that appears on the TV screen is "no signal".

  I can't understand what is wrong - someone can help please?

  Hello

  You can boot the system to Windows and you can use s to laptop display?

  After windows OS has started, use the Fn + F5 combination to switch between the internal display and the external monitor.

• Satellite Pro L300 does not illuminate

  Hi all, I'm new to this forum.

  I have a Toshiba Satellite Pro L300 and I've had it for about 2 years.
  But yesterday I closed the laptop as usual. But later I went back to it and tried to turn it on. But it does not work. Instead, when I press the power button the LED next to the battery symbol flashes orange/orange 6 times and then turns off.

  Can someone tell me what it is? I tried to let it load, but that has not worked. The amber light is the only light that flashes. It does not recognize that I plugged in the charger and I don't think that the battery was flat. So I'm angry and helpless right now.

  Can someone help me please?

  See you soon.

  Hello

  There are several indicators;
  DC, while running, the main battery, LED HDD/ODD.
  So I guess the power LED flashes in orange. Right?
  This means that something was wrong on the motherboard.
  Maybe power supply electronic malfunctions

  In this case, there is no much to do only mobo replacement could help to...

• Satellite Pro L300 starts flashing led no-battery

  Hello world

  My Satellite Pro L300 stopped working suddenly: nothing terrible happened, such as fall or other accident, so I can't explain what went wrong.

  The situation is: I have the laptop with the battery inside and connected to the power cable. I press the power button and battery led 5 times with the orange light just flashes. It doesen't start, not even the fan, just stay still. Same thing if I disconnect the power cable.

  If I remove the battery it doesn't blink even led orange.

  Does anyone know what could have happened?

  Thank you very much and sorry for my bad English!

  Silvia

  Hello Silvia

  I can't say for sure, but power led flashing is typical when there is a problem with power supply and electronic power supply.

  If you cannot start the laptop with AC power only (remove battery) then you need professional help with this.
  Sorry, but I m afraid there is nothing you can do about it.

• Satellite Pro L300: Noise of nasty when connected to your hifi installation comments

  Hi, thanks for reading,

  I just bought a Satellite Pro L300, to use for DJing. I use a Behringer USB mixer, and when I plugged it to the top there is a sound really bad comments coming out of my speakers.

  I tested it in the headphone jack output by connecting the laptop directly to my sound system and I hear the same comments.
  I went to check through troubleshooting and audio driver settings, everything seems fine.

  I thought then he might have been a problem to the ground, so disconnected the power to the laptop and it worked, the Larsen effect stopped. I tried to use a different power supply to an old laptop and the noise starts again.

  Is there anyway that I could solve this problem? I need to run food as the custom of the last battery life long enough while I DJ.

  Thanks in advance

  > so thought that it might have been a problem to the ground, so disconnected the power to the laptop and it worked, the Larsen effect stopped
  I agree with you and Akuma appears that this noise is related to the question of land
  In many cases, different people said they could solve this by using a 3 cable and AC adapter power cord.
  These special adapters can be ordered from the authorized service partner.

• Satellite Pro L300-1FN does not start - hang at the BIOS splash screen

  My Satellite Pro L300-1FN refuses to start. When turned on the laptop displays the home screen toshiba/insyde H20 BIOS and the message "press F2 go to the Setup utility, F12 to go to the start menu" and flashes the light access to the hard drive, but don't try to continue loading. I left the bios at the start screen, but it doesn't do anything for long hours on a power supply or is running the battery flat while on battery.

  Is there a way to re - put the BIOS on this unit? If it's a desktop unit I would remove the CMOS battery to force a reset of the BIOS but that's impossible on a laptop. The hard drive is fine because I have it plugged into another system to remove valuable data.

  Hello

  What happens if you press F2 when starting the laptop to the top?
  You can access the BIOS?
  If so, access the BIOS and set its default value. I think you need to press F9 or F10 to get default parameters, but this will be mentioned at the bottom of the page of the BIOS.

  Check it!

• Satellite Pro L300 - cursor black screen flashing

  Hi all

  I have a Toshiba laptop Satellite Pro L300 Vista.

  The customer earned him in because when it starts it goes to home Toshiba screen then goes to a black screen with cursor flashing at the top left. I connected external monitor with the same result. Swapped RAM as well.

  Have run Memtest (spent), Seagate HDD long test (past), Ultimate boot CD and Winternals without success.
  * F8 does not work * and no more than the resumption of the plant.

  Can enter the BIOS F2 and F12 no problems and the HARD drive is listed.

  I reinstalled Vista on CD and on reboot it goes back to blinking cursor. I tried booting from the Vista CD repair and system restore. FixBoot commands and FixMbr prompt as well as with the same result.
  I feel that it may be a corrupt CMOS sensor? It's like the OS installs correctly, but the computer loses his memory on reboot where the operating system?

  Is the battery CMOS easily accessible and removable on this model?

  Has anyone experienced these symptoms? Is - fixable at lower cost?

  Hello

  If you have clients, I guess you're a technician and hope you have a few pieces of equipment in your store.
  Have you tried to set the BIOS to default settings and check again?
  If possible try to exchange the HARD drive and test the functionality again.
  You can use laptop with Linux live CD (HARD drive not required)?

  To be honest that I think n problem t is ORGANIC and, in my opinion, the exchange of the CMOS battery is not necessary.

  Please test it with the new HARD drive and post comments.