Satellite Pro L300 - Tab key and enter key nothing

Similar Questions

• Satellite Pro L300: x 3100 and updated updated driver chipset Intel 965 graphics

  Has anyone installed the Intel 7.15.10.1666 driver, dated 02/26/2009 for the Mobile 965 chipset? Here is their web page to download:

  http://www.Intel.com/support/graphics/intelgm965/

  Toshiba Satellite Pro L300 doesn't work for some reason unknown to me, with the automatic update driver Intel (download containing the executable file). Therefore, I followed the instructions for manual installation (the download with the zip file).

  My laptop works fine with this new driver, and there is a clear improvement in the transitions between images when you use the option to Windows presentation (slideshow).

  This new driver installs also 3 Intel graphics programs:
  For the management of the display function keys
  Access to the system tray
  Wizard TV

  I used Windows Defender to remove these 3 programs that load automatically at startup of the system to maintain a fast startup time and not loading unnecessary programs in memory. There is no me no problem.

  Why Toshiba has added that this to the driver download page?

  Hello

  Thanks for this second info...

  > Why Toshiba has added that this to the driver download page?
  Who knows maybe it has not been verified, approved and tested by Toshiba?

  As far as I know every phone manufacturers test and approve drivers before they will be released in the pages of pilot
  Perhaps, it has not been approved...

  However, it s good new that this driver works correctly.
  I'll check it too on my laptop.

  See you soon

• Satellite Pro M40: tab key keeps jumping

  Hi I have a satellite pro M40 notebook and tab keys keep showing up, even when I keep on hanging down...
  its only 3 months, this could be a sign that it could break altogether and I have to report it under warranty.

  Any suggestions?

  Thank you!
  Beavis

  Hello

  Usually it of possible to remove the simple keys on the keyboard.
  If you want to back up the key on the keyboard if Cap you only have to push down the CAP.
  Then the CAP must be placed on the keyboard and shouldn't pop off t.
  She she s is not possible, then of course, you can try to contact Toshiba service partner in your country to replace the CAP button or the entire keyboard. (I'm not sure about the part by replacing m)

• Satellite Pro L300 (PSLB1A) touchpad and keyboard problems

  One of my school L300 keyboard and touchpad stopped working after a months of normal use. It has been reported, and on the advice of our technician, I used the disc of the cure to reinstall everything back to the original state. However, this does not have the problem. Now, I need to go through the normal configuration screens and am required to enter a user name that I can't do! This means that I can not check the drivers etc. The keyboard works fine in the BIOS, but not once windows starts.

  Hello

  Set the default BIOS settings and try again.
  Starting installation of recovery can you use keyboard (arrows, ENTER) or mouse in the Toshiba Recovery menu?

• Power supply adapter new satellite Pro L300-12Y

  HI, I have a laptop Satellite Pro L300-12 years and my adapter is beyond saving. Were can I get a new one? I couldn't find any so I ask you directly

  Hello

  You can order a new adaptor AC to a Toshiba ASP in you country.
  You can also check the reference number of the old power adapter and can perform a search on the internet using this part number for a replacement part.

  Welcome them

• Satellite Pro L300 - Webcam driver open fail

  Hello

  I have toshiba satellite pro L300 model PSLB1E and in theDevice Manager is not no matter what imaging device and the driver for the Toshiba Page is showing "driver open fail. "Restart the computer or cam" gears. I uninstalled the driver 10 times and the updated driver, but not the camera works and is not presenet in Device Manager.

  Where is the problem? the pilot? I'm desperate...

  Thanks in advance

  Hello

  Before performing a recovery facility, you should try to update the driver for the webcam and the BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If it doesn t work you must run an installation recovery and in the worst case, the hardware may be faulty and you will need assistance from an authorized service provider.
  If your laptop is still under warranty, the repair should be free.

• Triggers of Ctrl Key Caps Lock on Satellite Pro L300 - cannot open a session

  Hello

  I can't work my keyboard opn my satellite pro L300, I plug an external keyboard to log on.
  All the keys seem to work except the Ctrl key that activates the caps lock when I press on it.

  Ive scanned for viruses, reset the default keyboard settings and run the diagnostic tool and still no luck.
  My daughter can you press a combination of keys when she was on the phone active whiuch some lock but how do I reset it?

  Hello

  Check if the FN + F10 and FN + F11 are not enabled.
  If the FN + F10 and FN + active F11were, then you should see a green LED under these buttons. Check it out.

  Otherwise it s I do not know that any other combination of keys can remap the keys on the keyboard. for example; CTRL key to lock caps

• Problem with some keys on Satellite Pro L300

  Hello

  I have a problem with the keyboard on my Toshiba Satellite Pro L300. I can not type 'a', 'q' and 'z '.
  ESC, F1, tab and Caps Look are also don't work.
  I don't spill any liquid on my PC. Need help please, I don't know what to do. Thank you

  You have the latest model of laptop. If there is a problem with the hardware keyboard will be replaced free of charge.
  I recommend you contact the nearest authorized maintainer and ask for help.
  With diagnostic programs, they can check the functionality of the keyboard, and see if the keyboard needs to be replaced.

• Satellite Pro L300 will not answer F2 to enter the bios

  Hello
  one of my clients sent me to fix a toshiba Satellite Pro L300...
  Windows completely froze so they are off which makes windows unbootable.

  im having the problem now is that pressing F2 does not enter setup and F12 does not display the start menu.
  is there another key that I have to press on as well as F2 in the Fkeys allows access to bios?

  Thanks in advance

  Hey Lodore, that of great! :)

  Thank you for your comments.

• Satellite Pro L300 - keyboard and touchpad issues

  Hello

  I just baught my GF a PC Toshiba laptop refurbed for his 21st birthday from a reliable source, it's a Satellite Pro L300.

  I started it until all the setup stuff, me there only to find that the keyboard and the touchpad work not AT ALL.
  The keyboard caps lock key is not even lights up when I press it.
  I downloaded all the latest drivers for EVERYTHING Inc. the touchpad, it makes no difference.

  I'm quickly running out of ideas and come to accept the fact that the keyboard and the touchpad is maybe defective and therefore evil must give my GF a defective laptop for Denise 21st, not happy :(

  Any1 have any ideas?

  Thanks :)

  Edit: OK, OK very strange, after that I sent this message, I tried the keyboard once more and it works fine?
  Could this be something 2 do with the download of the VFR package?

  The touchpad is always tired, even when I try the fn + f9 combo?

  2nd edition: Ok now the keyboard stopped working again!

  ON EARTH!

  Hello

  Looks like a keyboard problem. who knows why it doesn t work looks like something would be wrong
  I recommend you visit your dealer and replacement request
  Otherwise, you may contact the ASP in your country for a fix

  I think it's everything you could do

  Good luck

• Satellite Pro L300 WiFi continues to drop and doesn't reconnect until you restart

  Hi, I have a Satellite Pro L300, number of model PSLB9E - 00G007EN running windows Vista professional.

  Recently I started trying to connect to my wifi at home instead of using the ethernet cable.

  Research shows my home network and then I connect with the password, everything all right at this stage, sometimes an hour, sometimes for 10 minutes and then the connection disappears. When I try and re-connect it does not find any wifi network, but I have not moved from where I was when I was connected. I have I-phones, etc. and another laptop running windows 8 connected wireless, and there is no problem with any other machine, just my toshiba!

  Sometimes if I turn off the wifi using the switch at the front and then put it again which solves it, but once again only for another 10/20 or 30 minutes. Sometimes even that does not work and I have to restart the machine to find the network! It works, but once again for a limited period until he gave up the connection and it disappears again, back to square one.

  I even tried to take this work and connect to the wi - fi, but still exactly the same thing happens, so I think I can rule out problems with my home network / router.

  I'm not very good with computers, but have managed to check if the driver is up-to-date, etc., and all appear here... Help, please!

  Post edited by: ANDY2807

  I think that the wireless is the following: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapter

  The driver version is: 6.1162.610.2009

  My Windows Vista Business 64-bit is by the way

  > I think that the wireless is the following: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapter
  Yes, you are right, the laptop seems to be equipped with the Realtek RTL8187B WLan card.
  This wireless network card supports 802.11 B and G standard.

  First update the WLan driver.
  Here you can find the latest WLan drivers available on the Realtek page:
  [Driver Realtek RTL8187 WLan: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=40&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = EU tr]

  This driver is for Win XP / Vista / Win 7

  In the event that the issue will not be resolved, go to the Device Manager.
  Choose the WLan card-> properties and go to the Advanced tab
  Here, choose either the 802 standard. 11 B or G. This setting depends on the settings of your router. If your router supports 802. 11 G, you must choose G

• Satellite Pro L300 - 27H: number invalid would be and model

  The school that I work for bought recentley 32 laptops from Toshiba Satellite Pro L300 - 27H.
  All laptops have been saved for the extended 3 year warranty and Cashback 2010 promotion.
  One of these laptops has now developed an error and needs to be repaired under warranty.

  I tried to do it via the website of Toshiba, but the system refuses to accept the serial number or model number of the laptop, saying there are not valid.
  I sent support in this regard, but had so no response or ackknowledgment.

  Anyone know why this model is not listed?

  John

  Hello

  If the laptop needs to be repaired, I recommend you get in touch with the local ASP in your country.
  The authorized service provider might be able to help you don t send or wait for the mails, but call the guy. It s a common number is your country.

  Here you can find the ASP, responsible for you:
  http://EU.computers.Toshiba-Europe.com-> supported downloads &-> locate an authorized Service partner

  Good luck

• Satellite Pro L300 - 24L and VGA card update

  Hello world

  I just have a Satellite Pro L300 - 24L and want to update the VGA Intel 4500 M for a Nvidia Quadro 3D & CAD applications, possibly for the games now an then.
  Is this possible and what card can adapt to my L300 - 24L?

  I'm really a noob in laptop, so your advice will be welcome heart.
  Features: CPU T3400 - 4 GB 800 Mhz HARD drive - 250 GB - Vista Home Premium 64 bit

  Hello

  I want to say clearly that portable computers technology design is not the same as on the desktop and if you have a good experience with desktop computers, you'll know that upgrading the graphics cards is not so problematic, but on laptops, the situation is very different.

  Laptops design and construction doesn't allow such flexibility for upgrades, upgrading the graphics card is not possible.

• 8 issues of the new owner of the Satellite Pro L300

  Hello to all forum users!

  I bought a new Toshiba, the Satellite Pro L300 laptop and have until January 14 to test - if it looks like it is not working properly I will return it to the store where I bought it.

  Here is a list of questions I have:

  1. whenever I turn on the laptop or it is suspension or hibernation mode, and when I disable it, the cd/dvd drive makes a clumsy mechanical noise.

  It seems to me like the cart that transports the laser and optics is running in a mechanical stop.

  Is this normal?

  2. There is a hot sub-pixel on the screen (in blue) and according to the Toshiba info in the box, this is normal and does not return.

  Should I worry about this?

  3. when I run the test memory at the start of the system, she says she'll start windows automatically at the end of the trial and show me the results of the test.

  It performs the test, Vista boot, but I see no reports of results.

  Where can I find the report?
  Is there a known issue with this test?

  4. the service program Toshiba to perform diagnostics of slot Vista does not work. Whenever I run the test (PCdiag.exe) I get an error message Vista saying a defect was found in the KERNEL32.dll module.

  Where can I get a fix for this?
  I have already installed the updated files on the Toshiba web site for the "Value Pack", which is where this utility, but still not the error message.

  5. I want access the settings of the bios at startup, but have not found a way to do it again.
  F2 gives me a menu for memory test or normal boot system.
  ESC is not me in bios Setup either.
  There is a utility for bios Toshiba that I can run Vista, and I see that any upgrade bios firmware should also be done through Vista.

  Is there a way to access bios at startup?

  6. I would like to run XP on this system and realized that this model (Pro L300 PSLB1E) is compatible XP, and I should be able to download all the drivers from Toshiba to run under XP.

  Does anyone do this?

  7. the laptop and configured Vista Basic when I did the first power on, but the license sticker on the bottom of the laptop has a product key for "Vista OEMAct Business." I was captivated by this laptop as the option to revert to XP Pro with Vista business. The box did not come with any CD or DVD and no manuals explaining how to install Vista Business.

  This is reason enough to return the laptop in the store where I bought it, which is a chore, I prefer to avoid if I can install Vista Business.

  Can someone help me understand what is happening here?

  8. is there a way to contact technical support by e-mail?

  Thanks in advance to anyone who can answer all of these questions!

  Hello

  Two weeks ago, I worked several days on friends Satellite Pro L300. Your questions are interesting and I will try to provide an answer or comment.

  1 this is normal behavior. I noticed it on other models of computer laptop too. Right now I use Satellite P200D and I noticed the same thing.

  2. of course, you may have noticed a dead on the screen pixel and more on what you can read on
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ8702EI0000R01.htm

  3. maybe follow links can help a better understanding:
  http://web1.Toshiba.ca/support/TechSupport/TSBs/all/-TSB001369.htm
  http://www.bleepingcomputer.com/tutorials/tutorial146.html

  4. what to say about this? I t has not noticed this error and I can recommend just reinstall full VAP. Remove preinstalled system, restart your computer and install the latest version of the Toshiba download page.

  5. When you start the laptop downstairs you can find info how to enter the BIOS settings. It usually takes F2. I really don't understand what is wrong in your case, but must work F2. Press immediately after turning on your laptop. Press several times. You have to work

  6. If you can find the download page of drivers, tools and utilities on Toshiba Windows XP Home edition, you should be able to install and configure Windows XP Home edition on this model of laptop. For the installation of Windows XP edition family please use Windows XP SP2 home edition.

  7. This must be clarified with your local dealer. The fact is that Toshiba doesn t offer any CD/DVD and recovery DVDs must be created by the owner of the laptop. I presume that you didn t seen or read Toshiba reminder about it. This point explains exactly what needs to be done.
  The recovery media can be created using the preinstalled Toshiba Recovery creator. The shortcut is placed on the desktop.

  8. I'm afraid, you must contact the hotline, but as far as I know Toshiba's toll-free hotline.
  Call and ask if there is something you want to know.

  Good luck!

• Satellite Pro L300 will not start - cannot get into the BIOS

  Dear,

  I got a satellite Pro L300, width a HARD drive partitioned, with Win XP installed C and D with Windows 7 installed, the problem is the following:

  Days when I turned on my laptop, the OS splash screen appears, stop boot on Toshiba logo process.
  In addition, I can't enter the BIOS with the F2 key or the Boot Manager by using the F12 key.

  Help, please.

  > stop boot on Toshiba logo process
  This means that the laptop can not pass the POST (power on self test) properly and it would mean that a hardware problem has been detected on the motherboard.

  Remove one of the modules RAM (check both) and try to turn on using a single module of RAM.
  It is possible that one of the RAM modules is defective

  It would also be possible that the motherboard is malfunctioning, as you can see, it is hard to say what role could be wrong, but what looks like a serious hardware failure