Satellite Pro L300 the FN command stopped working

Similar Questions

• Satellite Pro U400 - 150 - display has stopped working

  Hello guys,.

  yesterday I used to turn on my laptop (Satellite Pro U400 - 14) and it worked fine but after 1 minute my screen stopped working. I tried to restart the PC, and it worked OK again. But I turn on my laptop today and it didn t work at all. Everything is OK, PC works fine, everything is good, but only the display is black.

  I Don t know what happened with my laptop. :/

  Is there anyone who knows the answer to this problem?

  Thanks for all your answers.

  > Everything is OK, PC works fine, everything is good, but only the display is black.
  Of course, this isn't all right if nothing appears on the screen

  Connect an external monitor to check if you would be able to see something on the screen?
  Do this! Usually you should use the FN + F5 to alternate between the monitor internal and external.
  If this is not possible and nothing could be seen on the 2nd monitor, the graphics card problem can cause this.

• Satellite Pro L870 - Touch-pad suddenly stopped working

  Hi - the touchpad on my Satellite Pro L870 - 18G (Windows 8) has suddenly stopped working (after less than 2 months use of)-which makes the phone rather difficult to use. There is nothing wrong with the driver - according to the Device Manager, but I tried to reinstall when even (did not help).
  These things are not normally suddenly?

  Why device manager says that there is no problem when there is a very clear?

  Maybe the touchpad is disabled. Is there a any reaction when you use the FN + F5 key combination?

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• Satellite Pro L450D-14V - scroll function stopped working

  Hello, sorry for the bad post (novice!)

  I have windows 7 32 bit preinstalled with preinstalled rescue disk program (made on the two discs). Model is Toshiba Satellite Pro L450D-14V (2 GB of additional RAM installed, was only 1 GB). It has been provided directly at BT, after winning a competition.

  When scrolling to work stoppage, it was presented in the control panel/mouse that I could click on and get parameters which is the case of the Green/horiz. Bearer of buttons are even though they in grayed out when I tried to click them.

  Since the mucking with drivers I have now that I lost the functionality of touchpad synaptics, it only has a PS/2 compatible mouse, but all I have is the touchpad, workingl still without scrolling?

  Thank you for your interest

  Sigull (Tony)

  Hi Tony,.

  Welcome here in the forum! No problem regarding your assignment, it of not difficult and we can discuss here everything about Toshiba laptops! :)

  The scrolling feature is controlled by a touchpad driver you've already written and if you have lost this function I recommend reinstalling the driver from the official site of Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  On this page are two drivers listed: Alps Electric and Synaptics. You must install two drivers!
  After that, you should be able to use the new virtual scrolling :)

• Satellite Pro L300 - mode 'sleep' does not work correctly

  When I close the lid on my laptop it indicaes which is mode ensures by flashing of the green light but when I lift the cover upwards, it is said that windows were not close correctly.

  I checked all the settings and they seem ok. What could be?

  Hi Lop,

  What settings did you check exactly and what operating system you are using?

  I have the Satellite L300 and Windows XP. I m using TOSHIBA Power Saver and here I can put what happens if I close the lid, press the power button / stop, etc..
  Check it!

  In addition under XP check TOSHIBA Power Saver profile is selected in the Windows power options.

• Satellite Pro L20: Adapter WLan has stopped working and will not allow

  Hello

  I have a L20 Pro Satalite, which works very well. However, just before Christmas 2006, the adapter wireless (Atheros AR5005G) has stopped working.

  Windows XP Pro SP2 can see the adapter and network connections shows as being activated, but he sees not all networks.

  The Atheros Client Utility says that the adapter pases troubleshooting TI test diagnosis up to the Radio, when he says that the Radio is disabled and must be enabled in the Client utility.

  'Excellent!', I thought: opening the utility forward. Looked in the Action menu to find "turn on the Radio" is greyed out!

  Help!

  Any help is very welcome.

  See you soon,.

  Barry Smith.

  Is there a hardware option to enable and disable your wireless network card? (switch)
  You upgrade your Wlan driver recently? (If Yes, maybe with the wrong driver?)

  I had a similar problem once and resolved through driver updates... want to give it a try?

  You can download the driver generic Atheros (Version 5.0.0.107) available here:

  http://www.DD-WRT.com/DD-wrtv2/down.php?path=downloads/drivers/&download=Atheros5_0_0_107.zip

  Concerning

  chain

• Satellite Pro M70 - Windows XP has stopped working - registry problems

  My M70 lost (I will follow soon!). Windows XP has stopped working, registry problems. I finished by using the Toshiba Recovery disk and reformat the hard disk. Said again there is some registry problems and crashing.

  One had similar problems?

  Phil

  Hi Phil,

  If your laptop is always report registry errors after having re-installed the operating system from the recovery disc, then it is likely that your hard drive has errors. The Windows XP registry is composed of several files (or urticaria), and the installation process will always be located in the same area of the hard drive.

  Kind regards

• Satellite Pro L300 - wireless card does not work under Ubuntu

  Hi all,

  I want to know what is the model of my wireless card. I need to know because I need the driver of windows for Ubuntu. I see on the internet for the L300 series, we have a lot of wireless card... I want to know what is the card of my pc.

  Thanks a lot and best regards

  LOL: D you're funny type. Please don t do it harder they are.

  There are many opportunities to find out what card WLan has been inserted.

  The easiest way is to check the bottom of the unit.
  There are a lot of different labels and on one of the labels you should see a WLan card model or part number.
  Take this number it in the google search and google for this field.

• Satellite Pro L300 - Display works only on the external monitor

  I received my new Satellite Pro L300 tonight & followed the instructions one by one. Although the power etc. lights were turned on, I had no monitor display at all. I then plugged on my old pc monitor who * fact * work. I tried pressing Fn + F5 but still nothing on the screen of the laptop?

  Thank you, Adam.

  I think you need to bring your laptop to an ASP. They can check your laptop and exchange all necessary parts.
  I think that your laptop is under warranty, if the repair is free for you :)

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• Chicony usb 2.0 webcam stopped working when I update from windows vista to windows 7 on Toshiba satellite pro L300-EZ1521 computer laptop

  When I upgrade the operating system from windows vista to windows 7 on Toshiba satellite pro L300-EZ1521 laptop, Chicony usb 2.0 webcam no longer works showing a message "webcam driver open fail.please restart camera or computer".in Device Manager the status of the camera says "this device is working properly".to go the control panel I select camera assistant software and clicked on change and when I try to repair a pop-up window with a message "Please insert disk 1 that contains the file data2.cab" is displayed. I tried to give the path of the driver (I have Vista), but it did not work.

  I need help please!

  Hi Aynalm,

  You can check the following link and try to download display Utility for Windows 7 drivers, and check if it helps.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=2336263&RPN=PSLB9U&modelFilter=L300-EZ1521&selCategory=2756709&selFamily=1073768667

  Also check out the link:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

• Satellite Pro L300-291 - how to get the work of resolution 1920 x 1080?

  Hello

  Really bad, my old PC and laptop can connect to my external monitor to 1920 by 1080, which is the native resolution of the screen, even made my Xbox 360. But won't my Toshiba Satellite Pro L300-291, it tops out at 1680 by 1050 and will not display anything higher. I tried the latest drivers without success. What is a physical limitation on the laptop?

  Thank you

  Mark

  Hey Buddy,

  I agree with the user above:
  -Check the user manual and
  -Check out the features of your graphics card

  Then you will find information which screen resolutions are supported and not. In addition, don t compare it with other laptops or devices. Not all laptops are the same, there are different hardware, etc.

• Satellite Pro L300 - sound is not working properly

  Hi all!

  Last week, I bought my Toshiba Satellite Pro L300.
  I have had no operating system with the laptop, but I had my own XP, so I changed the SATA drives in compatibility mode and installed windows XP Pro.
  (By the way this is a Vista laptop officially)
  I installed all the drivers, but I have a problem with the sound. It has a bad quality, but this isn't the biggest problem.
  If I start listening to music, the sound stops every 3-4 seconds for a fraction of a second. It's as if the processor worked (like the computer was loading, and the processor is a bit overloaded) I usually have this experience if I run many programs simultaneously on my old computer, it slows down and the music stops for a second. But on the new laptop, I run winamp, I have dp nothing but listen to the music, and I get this problem.

  Can anyone help? Is it because of XP? Or the driver does not work properly? Or I have a big problem and should go back to the store?
  Please write!

  Hello

  Did you notice HARD drive activity when this happens?
  Maybe some anti-virus works in the background.

  Maybe you can order original Toshiba recovery DVD for your laptop model. Check it out under the https://backupmedia.toshiba.eu/landing.aspx

  Using WXP only? I ask this question because I believe that you can only get to this Vista laptop.

• Satellite Pro L300 1AI LCD screen backlight not working not

  Hi all

  I have a Satellite Pro L300 1AI running Windows Vista the computer starts and works fine but the backlight on the screen doesn't seem to work.

  Y at - it none of the Vista settings that can affect this (other than the Fn key command on the keyboard and settings) in Control Panel? Strangely, it seems to have happened since I installed Skype but I don't see how this could possibly affect it.

  Any help is much appreciated...

  Hello

  What s wrong exactly? Brightness screen laptop s is too low?
  Everything you see on the screen as behind a thick fog?

  Well, usually the FL Inverter control the backlight of the screen and if the FL inverter starts to malfunction, so you would get the problem like this.

  There is no alternative to replace this inverter FL.
  It s a small part behind the frame of the screen I think that it s a job for a technician in ASP.

  Welcome them

• 8 issues of the new owner of the Satellite Pro L300

  Hello to all forum users!

  I bought a new Toshiba, the Satellite Pro L300 laptop and have until January 14 to test - if it looks like it is not working properly I will return it to the store where I bought it.

  Here is a list of questions I have:

  1. whenever I turn on the laptop or it is suspension or hibernation mode, and when I disable it, the cd/dvd drive makes a clumsy mechanical noise.

  It seems to me like the cart that transports the laser and optics is running in a mechanical stop.

  Is this normal?

  2. There is a hot sub-pixel on the screen (in blue) and according to the Toshiba info in the box, this is normal and does not return.

  Should I worry about this?

  3. when I run the test memory at the start of the system, she says she'll start windows automatically at the end of the trial and show me the results of the test.

  It performs the test, Vista boot, but I see no reports of results.

  Where can I find the report?
  Is there a known issue with this test?

  4. the service program Toshiba to perform diagnostics of slot Vista does not work. Whenever I run the test (PCdiag.exe) I get an error message Vista saying a defect was found in the KERNEL32.dll module.

  Where can I get a fix for this?
  I have already installed the updated files on the Toshiba web site for the "Value Pack", which is where this utility, but still not the error message.

  5. I want access the settings of the bios at startup, but have not found a way to do it again.
  F2 gives me a menu for memory test or normal boot system.
  ESC is not me in bios Setup either.
  There is a utility for bios Toshiba that I can run Vista, and I see that any upgrade bios firmware should also be done through Vista.

  Is there a way to access bios at startup?

  6. I would like to run XP on this system and realized that this model (Pro L300 PSLB1E) is compatible XP, and I should be able to download all the drivers from Toshiba to run under XP.

  Does anyone do this?

  7. the laptop and configured Vista Basic when I did the first power on, but the license sticker on the bottom of the laptop has a product key for "Vista OEMAct Business." I was captivated by this laptop as the option to revert to XP Pro with Vista business. The box did not come with any CD or DVD and no manuals explaining how to install Vista Business.

  This is reason enough to return the laptop in the store where I bought it, which is a chore, I prefer to avoid if I can install Vista Business.

  Can someone help me understand what is happening here?

  8. is there a way to contact technical support by e-mail?

  Thanks in advance to anyone who can answer all of these questions!

  Hello

  Two weeks ago, I worked several days on friends Satellite Pro L300. Your questions are interesting and I will try to provide an answer or comment.

  1 this is normal behavior. I noticed it on other models of computer laptop too. Right now I use Satellite P200D and I noticed the same thing.

  2. of course, you may have noticed a dead on the screen pixel and more on what you can read on
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ8702EI0000R01.htm

  3. maybe follow links can help a better understanding:
  http://web1.Toshiba.ca/support/TechSupport/TSBs/all/-TSB001369.htm
  http://www.bleepingcomputer.com/tutorials/tutorial146.html

  4. what to say about this? I t has not noticed this error and I can recommend just reinstall full VAP. Remove preinstalled system, restart your computer and install the latest version of the Toshiba download page.

  5. When you start the laptop downstairs you can find info how to enter the BIOS settings. It usually takes F2. I really don't understand what is wrong in your case, but must work F2. Press immediately after turning on your laptop. Press several times. You have to work

  6. If you can find the download page of drivers, tools and utilities on Toshiba Windows XP Home edition, you should be able to install and configure Windows XP Home edition on this model of laptop. For the installation of Windows XP edition family please use Windows XP SP2 home edition.

  7. This must be clarified with your local dealer. The fact is that Toshiba doesn t offer any CD/DVD and recovery DVDs must be created by the owner of the laptop. I presume that you didn t seen or read Toshiba reminder about it. This point explains exactly what needs to be done.
  The recovery media can be created using the preinstalled Toshiba Recovery creator. The shortcut is placed on the desktop.

  8. I'm afraid, you must contact the hotline, but as far as I know Toshiba's toll-free hotline.
  Call and ask if there is something you want to know.

  Good luck!