Satellite C50 - A touch pad no longer works

Similar Questions

• Satellite S50t-B touch screen no longer works

  Hello

  My partner bought a S50t-B Satellite probably 5-6 months and everything worked perfectly, until she had a few updates to windows that has happened, and now the touch HID compatible drivers are apparently disabled in Device Manager?

  The touch screen no longer works, and I've pretty much exhausted all the options I could think.

  I tried to reinstall windows, apply all updates via the service center, I can't find the drivers for the touch screen on the support Web site downloads section and the bios etc is all to date.

  I was hoping someone could shed some light on how to proceed with this issue, since the main reason, she bought there the touch screen function.

  Thanks, Keegan

  Post edited by: keegz

  I don't have any idea what system you have installed, but if the laptop was equipped with touch screen, additional drivers for touchscreen are not necessary.
  If touch screen is working properly, the Windows (Win 8.1) should detect it automatically.

  What Satellite S50t-B-ooo do you excatly?
  From my point of few, the laptop must be set to settings factory just to check if its really a software related issue... so I wonder why you do not use HARD drive recovery or recovery media to restore the laptop to factory settings?

• Satellite M40X-189 - Touch Pad has stopped working

  The touchpad has frozen. I rebooted the computer and the touchpad worked. This happened several times, and then by restarting does not clear the problem. I checked in the device several times Manager and sometimes the mouse was listed and sometimes it wasn't! I restored the computer to an earlier time when the touchpad was working but it does not solve it. An Agent from Toshiba offers the soft ware was corrupted and I need to save every thing and use the recovery disk to reload the software for the tablet. I'm not ready to do it again. Currently an ALPS pointing device and a compatible mouse HID are listed in Device Manager, and both are erroneously reported as working. Any other ideas on how to fix the touch pad?

  Hello

  In my opinion, you should try to use an external mouse to see if it works again and again. Believe me on this path it is not easy to say why this happens.

  There may be a hardware problem, but it must be tested. If you preinstall the unit with recovery CD unit will be clean and on this path, it is not possible to say that some additional software has any influence on that.

• Satellite U840T-103 - touch screen no longer works

  So, I got the computer toshiba laptop for a little over 3 months and run since version 8.1 Win.

  Laptop computer and touch screen worked fine until today, when it comes no longer responds to my touch.

  The laptop has always he has touchscreen, it just doesn't work!

  Any ideas?

  Thank you
  Adam.

  Hello

  Go to the control panel (Windows key + X-> Control Panel)-> Tablet PC setting.
  The first display tab contains options such as configure screen stylus and touchscreen.
  Here, you should be able to start the installation program and identify the touchscreen.
  The first option must contain 1 internal LCD
  At the bottom, you might find button to calibrate and reset the settings for the internal LCD.

  If this does not work, the problem might be related to a hardware malfunction.
  In this case, only a technician would be able to help you.

• Satellite P750 - Soft Touch keys no longer work, nor of the FN keys

  Recently my soft keys touch has stopped working. My laptop is only around the age of 4 months. Had been working fine so far. No new software had been placed on the laptop in the week before the soft keys touch, stop working. I tried to use the FN and function keys, but they did not seem to do anything.
  I tried to push for a restoration of the previous system with no result. I uninstalled and reinstalled the value added together as suggested several places in this forum and most who did for me is to kill internet bandwidth and my time.

  Is there a solution for this or I have to send this to a warranty repair?

  I noticed you want it seems to be a common problem across all series of portable computers satellites. Is there a common error here?

  Any help is appreciated.

  Hello

  Next to the installation of VAP, the Support of Flash memory card utility must be installed also.
  The control of the utility Support of Flash Card FN buttons

  If this is not enough, you have another option: you can get laptop to factory of course it is method ridiculous because the HARD disk should be formatted in such a way case before doing this, backup data, first.

• Satellite Pro L870 - Touch-pad suddenly stopped working

  Hi - the touchpad on my Satellite Pro L870 - 18G (Windows 8) has suddenly stopped working (after less than 2 months use of)-which makes the phone rather difficult to use. There is nothing wrong with the driver - according to the Device Manager, but I tried to reinstall when even (did not help).
  These things are not normally suddenly?

  Why device manager says that there is no problem when there is a very clear?

  Maybe the touchpad is disabled. Is there a any reaction when you use the FN + F5 key combination?

• Satellite L510-S432 - Touch Pad has stopped working

  Hi all.

  I bought this laptop last 2 weeks, it works well at first.

  It was once I rebooted the system to reduce some startup programs through msconfig, the touchpad doesn't work. Before the restart, there is a tool bar showing on top there whenever door - press the 'Fn' and now he gone too.
  However, the function "Fn" still work, where I still can control the brightness, the numeric keypad, and etc. through the fair. Fn Fn + F9 key that usually turn on/off the touchpad does not work.

  I had reinstalled the synaptic driver, but still, it did not work. I had activated back all system startup that I had to close, it still does not.
  I try to restore the system, but failed.

  Need help, thanks first to all who help.

  Hello!

  To me it sounds like that, the touchpad is simply disabled with FN + F9 and you will need to activate it.

  I assume that you are using Windows Vista, then you need to reinstall the Toshiba value added Package. You can find it on the Toshiba site. This package is required for the FN keys and other special functions.
  But before installing the new version, you need to remove the old version first.

  An interesting thing: you wrote this system restore failed. What exactly do you have and do you have an error message?

  Good bye

• Satellite Z830-10U - Touch Pad has stopped working

  I have been using a USB mouse for a few weeks and touchpad is still operational. A few days ago the touchpad has stopped working. No issues are raised in the device manager that told me the power switch for the touchpad buttons. But by pressing the dedicated button and fn F9 has not changed anything.

  Really confused, but think I'm missing something really obvious that I can not think an event trigger, so assuming that some magic button will bring the key back to life.

  All help gratefully received...

  Hello

  What happens if you disconnect the USB mouse?
  You can use the touchpad again?

  From my point of view, the use or installation of an external USB mouse has affected the touchpad feature, I can't say with certainty why and what is happening right here, but I read in various forums on similar problems and sometimes caused USB mouse use touchpad problems.

  For example: in my case the touchpad does not work with connected USB mouse I was very confused, but found a solution in my case the option disable touchpad when USB mouse is connected has been verified and this disabled the touchpad.

  You can find it here:
  Control Panel-> mouse-> last (Advanced) tab-> the Advanced Settings button

  One of my friends couldn't use the touchpad because it has been disabled in the BIOS.
  It is worth to check also

• Satellite C50D - B - 11 X - touch pad does not work

  Hi I have a C50D - B - 11 X Satellite, I've upgraded to windows 10 and now the touch pad does not work, the cursor is located in the middle of the screen, can anyone help.

  Check if the touchpad would work after uninstalling the driver for touchpad of programs and features that you can find in the control panel...

  I'm not sure that the touchpad driver developer but the Synaptics touchpad driver or MOMENTUM... you may need to check this...

  After removing the touchpad driver, please restart the system.

• Satellite L20-100 Touch Pad scroll does not work for Mozilla Firefox

  Hello

  Mine is a laptop Satellite L20-100. My touch pad scroll (the page scrolls automatically when you slide your finger upwards & downwards on the right edge of the touch pad) does not work for the Mozilla Firefox browser. It works fine with other applications like windows Explorer, microsoft word. When I try to scroll in the window of the Firefox browser, this isn't schroll at all. Please can someone help me?.

  Kind regards
  Anish

  Hello

  Read on the forum of Firefox:

  http://forums.mozillazine.org/viewtopic.php?t=221466

  If it doesn't help you, after your problem here

  Post edited by: Jeka -?

• I have a Toshiba satellite L455D laptop and the touch pad does not work

  If I plug my usb wireless mouse that works, but when I unplug it the touch pad does not work

  Have you checked to see if your laptop model has a physical button around the mouse pad that allows & turns off?  If it does not, many cell phones often have a software switch that can toggle the on & off power mouse pad.  It is usually triggered by a combination of function keys (key Fn + one of the F1 to F12 keys).

  Take a close look at the row of the top of your keyboard and see if you can find a key that has a small symbol that looks like a mouse pad.  If you find one, try pressing it in combination with your Fn key to see if your mouse pad features returns.

• Pro L10: After using a wireless mouse, the touch pad has stopped working

  Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

  I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

  Can you help me?

  Hello

  It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
  I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
  I guess that you are having regular problems with a USB mouse.

• Right-click Satellite L505-S5988 touch pad problems

  I recently bought this laptop and for now what is the right click of the touch pad does not work for certain tasks.

  For example if I wanted to do a right click on a link and open in a new tab I wouldn't in a position where if I wanted to save a picture by right-clicking it the usual menu options would not appear.

  I don't know what the problem is.

  If anyone has any advice I would greatly appreciated it. Thank you.

  Hello

  Hmm. are you sure it s a touchpad problem
  Have you tried the same thing using a USB mouse?

  I think you should do this first of all maybe s a software problem (operating system)

• Since upgrading to 9.2 this morning, Touch ID no longer works. I reset everything and now cannot even enter with fingerprints. It's all clean, but nothing happens. Grrrrr... Ideas?

  Touch is no longer works after upgrade to 9.2 this morning. I reset all the settings and can not get readmitted prints. Ideas? THX

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Since switching to windows 7, my finger pad no longer works. Any help appreciated

  My finger pad no longer works since moving to Windows 7. I looked good and tried as far as I know how, now I'm lost... Please help!

  You may download your touchpad software which feeds it.  You can do it from the website of your computer manufacturer.  Just look at their section downloads/software/drivers.  You will take just the model number of your computer and they will present you all the drivers they have.  Just take one for the touchpad and install it.