Satellite Pro M15-S405 blocks runnig the bars of memory

Similar Questions

• Satellite Pro M15-S405 - no sound on XP

  Several weeks ago my Satellite Pro M15-S405 lost all sound. No error message appears anywhere and everything looks good (on where should be and resolved volumes okay, etc..) I tried to download the current audio drivers (SoundMAX) on the Toshiba site and reinstall them, but that did not help.

  I go to the principle, at this stage, that it updates of Windows caused the problem; but I could be wrong. I looked everywhere for an answer. Someone on this site has a suggestion about what to do about this situation?

  Thank you.

  Hello

  > I suppose, at this point, that is the updates of Windows caused the problem
  Well, your guess could be good!

  Why you n t update and install the patches Microsoft Web site as a whole?
  Visit this site to MS and it will check if some patches are missing:
  http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

  Please also check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21110&MessageID=77805

  The user provides the Abe and the solution how to make his return on Win XP SP2.

  1. download Microsoft's KB835221 hotfix
  2. Remove "Audio device on High Definition Audio Bus"
  3. install KB835221
  4. reboot the system
  5 XP automatically detects devices

  Good luck

• Re: Satellite Pro A300 - program to test the motherboard and memory

  Hi all

  Could you please suggest a program to test the card mother of my laptop Satellite Pro A300 and problems of RAM on reliability and compatibility.

  Thank you.

  Hey Buddy,

  There is no software tool to test the motherboard. This is possible with special Diagnostics of an authorized service provider.

  But for RAM, there are several that Memtest86 diagnostic tools. It s based BACK of diagnostic tools that checks all areas of memory with different methods. Freeware tool is really nice that you can download here:
  http://www.Memtest86.com/

• Satellite Pro M15-S405 - password at startup

  Hello!

  Laptop 1 day install the password to turn on.
  Need code for answers.
  In our region without 1 ASP service center. Uzbekistan. Tashkent.
  The reference in support of the Russia, they threw support on some companies in a Russian region, seeking to bring the laptop. I'm in Uzbekistan. And accordingly in order to carry the laptop in Russia is generally meaningless. Why deny me the decision of the problem of landmines by mail? After all in these models were the problem with passwords. To which it is possible to address the decision problem?

  My mail: [email protected]

  Sorry I put t speak English well.

  TNX.

  Hey Buddy

  I understand you very well, but the point is that ONLY the ASP can help you in this case only guys can remove the BIOS password.
  I wouldn't also recommend sending e-mails because you don t know who could read.
  Call the guys and explain your situation and I doubt you pay 1500 Euros for the road there is also an old invention called post office.

  Sorry, but I do not give any proposed solution, the ASP is your last chance to get rid of this password!

  Good bye

• Satellite Pro A300 freezes when on the internet

  Satellite Pro A300 freezes when on the internet & the only way to turn it off is to take out the battery. Bought new Dec 2010 & is under warranty - suggestions?

  Hello

  have you tried to update drivers Lan (wlan)? What browser do you use? I guess, the Internet explorer, try firefox or opera. Also, your computer may be infected with the virus, or blocked by the firewall. Have you installed software before it starts? Is this ok when you bought it? I ask you too, because you do not have a lot of information.
  It is especially the driver, software problem.

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Satellite Pro 4600: where to find the drivers

  Where to find drivers for Toshiba Satellite Pro 4600 drivers?
  We cannot choose this model in the support page...

  The drivers for this laptop Satellite Pro 4600 series are on the European driver Toshiba page.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  The laptop seems to be an oldie and therefore you should take a look in the _ * Archives * _ folder!

  Best regards

• Satellite Pro L40 - how to enable the WLan using ConfigFree

  Can you help me?

  My English is bad I do not end.

  The question is:
  My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

  Help please!
  I want to know what's wrong

  Thank you!!

  Hello!

  Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
  Her check first because otherwise, you can get the WLAN to work.

  In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
  Check it!

  After this Free Config should find your WLAN router if you are in the range of that.

  Good bye

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• Satellite Pro A300 - upgrade RAM of the former model A200

  Hello

  I need an advice. I just took a memory (Samsung) 1 GB of more old model Satellite A200 module and put it on my new model Satellite Pro A300. Here is the information about the SPD:

  _Original (which has been installed in the factory): _

  DIMM1: Kingston (2 GB DDR2-667 DDR2 SDRAM)
  Manufacture Date week 20 / 2009
  @ 333 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 20-43-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
  @ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
  @ 200 MHz 3-3-3-9 (CL-RCD-RP-RAS) / 12-26-2-3-2-2 (RC-RFC-RRD-WR-WTR-RTP)

  _From old Toshiba Satellite A200: _

  DIMM3: Samsung M4 70T2953EZ3-CE6
  Manufacture Date week 42 / 2007
  @ 333 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 20-35-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
  @ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-28-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
  @ 200 MHz 3-3-3-9 (CL-RCD-RP-RAS) / 12-21-2-3-2-2 (RC-RFC-RRD-WR-WTR-RTP)

  According to the information provided was it a good or bad idea? I mean differences in the SPD and will this performance, stability, etc. ?

  Thanks a lot for your time!

  Hi xosman,

  According to the information that you have posted it seems that the other Satellite A200 module has the same specifications, so if your laptop works with this module it s no problem I think.

  Satellite A200 A300 using the same memory modules DDR2 so change the RAM is no problem.

• Satellite Pro L300: How to get the sleep settings

  Before you have to play with the Satellite Pro L300 laptop recently (on the instructions of the Tech) when I close the lid of the laptop that he went to sleep BUT when I opened the lid eventually, I had to press the power button to restart the laptop.

  But now, he's just on stand by.
  How can I get this back to how it was (having to press the button to exit stnd - in)-help!

  I tried to turn off Toshiba power saver and using the windows settings but nothing
  I have treid working :(

  Can anyone help?

  I get at the end of my home with this computer laptop blinkin :(

• Satellite Pro A200 - how to activate the new device LAN card?

  Hello.

  I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

  The laptop is running Windows 7 64 bit

  Kind regards.

  Hi evo8.

  What card WLAN have you had before and do the work of a former?
  I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

  By the way: do other FN keys FN + F8 work or simply not?

• Satellite Pro M15-405 - Permanent reboot cycle with 1 GB of RAM

  So I have an old Satellite Pro that I needed to make it work again since its my only laptop.

  I did some research and discovered that my mode has a maximum upgrade to 1 GB of RAM SODIMM. I took out the stock 256MB 266 MHz PC2100 RAM and replaced with a set of Corsair 512 MB DDR1 SODIMM 333 MHz PC2700 sticks for a total of up to 1 GB of RAM and the problem I continue to meet, it's that I can't use a barrette of 512 MB in the lower slot.
  If I add the two he goes into a cycle of permanent reboot before the windows logo appears (right after the white bar loading).

  How can it be solved so that I can use all the 1 GB of RAM space?

  Thank you

  Hello

  Normally, the laptop should be able to handle the 1 GB of RAM, you said, but for me that it sounds like it's the new modules are not compatible with your laptop. I have good experiences with RAM Corsair in my desktop computer, but for the upgrade of my notebooks, I never used RAM Kingston.
  Maybe you should try it with other modules.

  In the worst cases, the other memory slot is faulty and you need to replace the motherboard :(
  But I would try the other modules first.

  Welcome them

• Satellite Pro A120 cannot start when the printer is connected

  Hi I have a brand new Toshiba Satellite Pro A120 but I'm having a very strange problem.

  I installed my printer - Epson Stylus Photo R300, but now the laptop will not start if the printer is on. When I turn it on the Toshiba screen comes ok, then the Windows XP screen comes with the black background when the blue bar to cross to load Windows but its all disappear and the laptop just hangs and will not!

  However, if you turn the printer off and turn the laptop it starts up fine!

  Its really the printer which is the cause as its only when I turned it on.

  It's never caused this problem with my old PC using Windows XP too.

  Any help with a resolution would be greatly appreicated.

  Thank you

  Adam.

  How to disconnect the printer during the boot process? ;)