Satellite Pro M70-235: She Dual Channel?

Similar Questions

• Is satellite Pro M70-235 - possible to upgrade the processor?

  Hello

  Is it possible to upgrade of processor in this laptop (Pentium M 750-1866 MHz) Pentium M 780 2266 MHz?

  Thank you..

  Hello

  Theoretically, it of possible to exchange the processor on your laptop, but nobody will be able to tell if the laptop works fine with the new processor or not.

  You mustn't forget that the BIOS and motherboard is designed for the preinstalled CPU and it s not tested with another processor. Normally a newer or faster CPU produces more heat and I don t know if the Assembly of cooling on your laptop is sufficient for this.

  If you still have the warranty of your laptop you will lose because Toshiba doesn't support the CPU upgrade:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

• Satellite Pro M70-235: need last display driver for Ati X 700

  Hi, I decided that I will update driver graphic card but on the official ATI driver is not compatible with Toshiba laptops. On the download from Toshiba site, I found that older drivers (8.203-29/08/06) for my laptop to type but I need the latest driver. Can someone help me or send me a download link?
  Sorry for the English and thanks for responses

  Nothing to do. On the Toshiba page, you will find that these pilots. I already checked.
  Maybe the omega drivers will help you

• Is 2 x 1 GB memory supports dual channel on Satellite Pro M70?

  Hello

  I was wondering if I can wquip my M70 with 2 x 1 GB of RAM running in Dual channel mode? Seller is sure it should work, but as I found no info on the pages of toshiba, I would rather confirm here.

  THX in advance

  Hello

  The seller was right. The Satellite Pro M70 supports DDR2 memory modules. These modules are dual channel.
  You can upgrade the memory up to max 2048 MB (2 x 1024 MB)

  Greetings

• Satellite Pro M70: DDR2 memory matching question

  I have a Satellite Pro M70 (model PSM76E-00500KEN) with 512 MB of RAM in a housing and want to upgrade to 1 GB or more. I plan to put a 1 GB module in the slot to spare, but reading that there is sometimes a performance advantage of the installation of modules of DDR2 in pairs. Can someone tell me if there is any advantage to have the correspondence of the modules into the two slots of the Satellite Pro M70? Or, in other words, is there any reason not to run 1 GB in a slot and 512 MB in the other?

  Hello

  Dual channel DDR involves the use of memory modules DDR 2 to double bandwidth memory. The memory modules DDR themselves are no different. The only requirement is that the controller memory on the motherboard supports this interface dual channel.
  Please also see this site useful:
  http://www.4AllMemory.com/index.cfm?fuseaction=FAQ.FAQs&category_id=5

• Anyone using Win2k on a Satellite Pro M70 or drivers will be used?

  Hello
  I just bought an M70. Needless to say that it comes with Windows XP.

  The software that I use on my project specifically requires Win2k and a 1 GB of RAM.

  I would like to know if
  1. anyone who has tried to install Win2k on M70 and if so, of the problems they might have faced.
  2. I'm looking desperately for the M70 Win2K drivers. Can someone help me with where I can find them?

  Finally, if M70 is not the right book for me, anyone knows another piece which has 1 GB RAM / 100GB HDD combination and supports Win2k as a BONE.

  Appreciate the answers of all the experts.

  Thank you
  Sanjeev malak
  Muscat (Oman).

  Hello

  Well, the fact is that this laptop only comes with the WinXP.
  I also checked the Toshiba site and there is no drivers for W2k.
  If you also use the W2k on your laptop, you can try to install it on the second partition and use it as a dual OS notebook. But you will not be able to use special Toshiba and utility tools.

  There are many models of Satellite Pro M70, but generally, it should be possible to upgrade the memory for max 2024 MB. In this case there is no problem with the upgrade.

• Satellite Pro M70: removal of the USB device causes other peripheral USB does not work

  Withdrawal/use of a USB for a USB device causes devices on USB port to get affected.

  Satellite Pro M70-199 (2 GB RAM)
  Windows XP Pro (SP2) with all updates of Windows installed until end of October 2006.
  This laptop has 3 USB ports.
  An Eicon Diva ISDN USB modem is connected to a USB port.

  When certain devices connected to a different USB port are deleted (even if removed safely with "eject" or "remove device safely", it causes the ISDN modem to file either a double channel (64 k + 64 k) ISDN, or for the ISDM modem to disconnect completely.)

  Cause this include any memory stick USB, MP3 player (ipod and creative zen) and so on.

  Do other devices, such as USB external hard drives & sometimes external DVD USB drives, and sonetimes do not produce this problem.

  Is this a known issue?
  If it is a hardware interrupt problem, how to solve it?
  This problem is related to the modem and the laptop?

  As a note, in addition, intermittent (random) times (cannot reproduce all the time, but it happens once or twice a day) when a USB device is accessible it causes the modem USB ISDN to drop a single channel, even if the lights on the modem still show it as it is connected. In this case and the case above, the only way to get the modem ISDN USB running again is physically disconnect and reconnect.

  The reason why it is a crucial issue is that:
  (1) the modem speed is halved or disconnected
  (2) the ISP continues to full rate for a double load connection even if a channel has been dropped.

  Any help will be greatly appreciated.

  Here is some information on USB devices, followed by some information about IRQ settings.

  Driver date 01/07/2001
  Version of the driver 5.1.2600.2180
  Driver provider Microsoft
  File INF usbport.inf

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
  Location Information PCI bus 0, device 29, function 0
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 23
  Port 1800-181F

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
  Hardware ID PCI VEN_8086 & DEV_2659 & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 1
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 19
  1820-183F port

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
  Hardware ID PCI VEN_8086 & DEV_265A & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 2
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 18
  Port 1840-185F

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
  Hardware ID PCI VEN_8086 & DEV_265B & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 3
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 16
  Port 187F-1860

  Description of the driver Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
  Date of the driver 06/01/2002
  Driver Version 5.1.2600.0
  Driver provider Microsoft
  File INF usbport.inf
  Hardware ID PCI VEN_8086 & DEV_265C & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 7 function 29
  PCI Device Intel 82801FBM ICH6-M - Enhanced USB2 Controller [B-1]
  Device resources
  IRQ 23
  Memory B0000000-B00003FF

  Description of the device resource sharing
  DMA 04 exclusive Direct memory access controller
  IRQ 00 exclusive system clock
  IRQ 01 exclusive Standard 101/102 key or Microsoft Natural PS/2 keyboard
  IRQ 08 exclusive system CMOS/real time clock
  IRQ 09 shared system compatible ACPI Microsoft
  IRQ 11 shared Intel (r) 82801FB/FBM SMBus Controller - 266 a
  IRQ 12 exclusive pointing Alps-device
  IRQ 13 exclusive Numeric data processor
  IRQ 14 exclusive Primary IDE Channel
  IRQ 16 shared generic CardBus controller
  IRQ 16 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
  IRQ 16 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2662
  IRQ 16 shared Mobile Intel (r) 915GM/PM Express PCI Express Root Port - 2591
  IRQ 16 shared ATI MOBILITY RADEON X 700
  IRQ 17 shared Realtek AC97 Audio
  IRQ 17 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2660
  IRQ sharing 17 Texas Instruments PCIxx21 Integrated FlashMedia Controller
  IRQ 18 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
  IRQ sharing 18 Texas Instruments OHCI Compliant IEEE 1394 Host Controller
  IRQ 19 shared host controller Standard SD compatible SDA
  IRQ 19 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
  IRQ 19 shared Intel 82801FBM Ultra ATA Storage Controllers - 2653
  IRQ 20 shared of TOSHIBA software modems
  IRQ 21 shared Realtek RTL8139/810 x Family Fast Ethernet NIC
  IRQ 22 shared Intel (r) PRO/Wireless 2200BG Network Connection
  IRQ 23 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
  IRQ 23 shared Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
  

  Post edited by: sakhri

  Hello

  I have Satellite M70-159 and I didn t notice any strange problems with the USB ports. I use a few of them as printer, webcam, USB, memory stick, optical mouse, and external HARD drive. The devices are recognized correctly and I always remove without option delete without danger.

  Now I have Vista pre-installed and there is no problem so far. If I understand you right USB ports work fine but there is problem with USB modem only. Am I wrong?
  Also try to contact the producer of modem support. Is perhaps the question like this known and if all goes well, they have a logical explanation.

• Satellite Pro M70: How to connect to the internet using a second computer

  I have a Toshiba laptop Satellite Pro M70 with a RTL8139/810 x Family Fast Ethernet NIC use this, the laptop was connected to a desktop PC, whereby it is connected to the internet via a modem ADSL (USB) on the desktop. The laptop runs XP Pro; the desktop has XP Home.

  My laptop has been a nasty virus. When removing it, he lost the ability to network. I tried "repair network", but he could not find an IP address. In the end, I had to manually set an IP address for the network to work again. You use IPCONFIG release and renew the IP addresses that failed - unable to connect to the DHCP server.

  He could now see the Office network and Exchange files across be it, but it could no longer contact internet.

  I decided to reinstall the OS on the laptop, but this does not solve the problem. I still have to manually set the IP on the laptop. I can connect two PCs, but does not see the internet from the laptop on the network.

  If I connect the laptop directly to the internet via the modem, it works fine. I can even access the internet from the computer on the network when this is the laptop that has the internet connection.

  The virus could have damaged the Ethernet controller, or she affected somehow?

  Is it possible to test?

  Have you advice?

  Hello

  The virus was detected on the laptop you so maybe your PC has also been affected.
  Did you check if the laptop and the PC using the same workgroup?

  XP supports a help option. There, you might choose the Internet Connection Sharing Troubleshooter. "

  Maybe it helps

• Update of the BIOS works is not on Satellite Pro M70-275

  Hey

  Im having a problem, I can not update my bios, I downloaded the right bios file, but when I try to update I get a bsod just until it begins to Flash the bios.

  The biosfile I downloaded is:

  ARKive
  Satellite pro
  Satellite pro M series
  Satellite pro M70 (PSM76)
  PSM76E

  Its the bios 1.70 for win xp

  IM also of problems with my sound, I downloaded the rather and installed, but there is no sound.

  IM using Windows XP SP3

  Concerning
  Lars

  Hello

  BIOS update is necessary? Or what is the intention to update the BIOS?
  Usually if you have some serious problems, the BIOS isn't essential update

  With regard to the sound:
  You can solve the problem in Windows XP, install the KB888111 and KB835221 hotfix before you install the audio driver.

• New HDD in my Satellite Pro M70 shows 55GO only

  Well, I put in a new form of HDD Samsung in my Satellite Pro M70 model PSM75E. It has a size of 320 GB, but it s only showed like a 55 GB of hard drive.
  How can I solve this problem, my system is Windows XP with SP3.

  Thanks for your replies

  Hello

  You must format the HARD drive to NTFS and should create a new partition.

  Welcome them

• Satellite Pro M70 - stopped screen lights

  Hello

  My Toshiba Satellite PRO M70 screen lights.
  I don't know why, but sometimes when the screen is broken and I put it up it turns on, but after a few seconds it stops.

  It started a few days without something strange in my pc like hitting or something like that.
  I tried to connect an external display and it works weell.

  Anyone know why it cant pass or how fix it?

  Thank you

  Greetings

  Toni.

  Hello

  The Fn keys work?
  You can increase the display button narrowly by using the FN + F7 combination?

  Please also check the energy saving profile.
  Maybe the display brightness is set to a lower value in the power saver profile.

  But if you will not find anything unusual in the settings of the software, so I guess that the brightness display problem is related to the failure of inverter FL.
  The FL inverter controls the brightness of the screen, and this part needs to be replaced.

• Use SDHC with Satellite Pro M70

  Hello!
  My question is about the Satellite Pro M70 (PSM76) SD card reader. Can I use SD card 4 GB or more (SDHC)?

  All what I can say is: you can try to use it and I hope to be recognized correctly. I have Satellite M70, but I do not use SD cards and unfortunately can not test it on my laptop.

  Just test it. To be honest, I'm a bit skeptical about it.

• For Satellite Pro M70-220 laptop cooling pad

  I want to buy a block of cooling for my laptop Satellite Pro M70-220 (PSM75E) and would appreciate advice and recommendations on the most appropriate cooling pad. Plateau broken down to use the desktop, rather that the tower would use.

  The dimensions of the base of the laptop are about 34.5 cm (W) x 24 cm (P) - (or 13.5 ins (W) x 9.5 ins (D)).

  The laptop has 2 vents in fan - a vent is located on the left side (half back) of the laptop, and other the vent is located on the left side of the base in line with the side wind. Subject to correction, I feel that the cold air is sucked through the vent base and is blown through the vent on the left side. If that is correct, then I guess the cooling pad fan would blow air on the basis of the laptop, thus completing the airflow of the computer laptop cooling fan.

  Thank you

  Alan CB

  Hi Alan

  Before starting to discuss cooling pad, I want to ask you why you need. I have Satellite M70-159 and have never even think to buy this extra part.

  Have you ever watched on the net and found something that may be good enough for you?

• Satellite Pro M70 - USB port does not recognize the device

  My Satellite Pro M70 has three USB slots, one on the left and two (vertically one above the other) at the back of the laptop.

  The top slot to USB in the back started giving problems. Sometimes, my computer can't see all that I plugged in there. But if I unplug anything - usually the printer or the mouse - the computer will usually see it then.

  What is the problem? Can do nothing about it?

  My operating system is XP. and my laptop is 4.33 year.

  Thank you.

  Hi Mannix,

  Have you already updated the chipset drivers?

  I read in the forum about these questions and normally helps to reinstall the chipset driver. :)

• Satellite Pro M70: buttons for internet and cd/dvd

  I have a portable Satellite Pro M70 with XP and - I believe - service pack 3. I bought it there is a little more than four years (Dec. 2005).

  There is a series of six buttons to the right of the keyboard, just below the power button. The first button has been programmed to launch my internet browser to a key. The other buttons have been to launch the media player and control CD/DVD discs (play, pause, stop, forward, backward).

  These buttons were a convenience, but for some time, they have not worked. I have no idea why. Can anyone help? Can they be fixed easily?

  > These buttons were a convenience but for some time, they have not worked.
  What does that mean? They are broken and do not work or you cannot start defined applications?
  Have you tried to set them using Toshiba control.

  You can start this application from Toshiba Assist > Optimize.