Satellite Pro P - new LCD Inverter

Similar Questions

• Satellite Pro L10: New LCD sceen necessary

  Hello

  My screen went on the blink and I want to replace it, I looked at this link) (http://www.screentekinc.com/Toshiba_Satellite_Pro_L10--15-inch--1024x768-xga-laptop-lcd-screen.shtml)

  I want to replace the LCD screen with the new type High Glossy and would like some advice as to whether it is compatible with my system.

  I saw that glazed screens for sale elsewhere, all indicating that they are consistent, compatible, Yes, but I should update my system, any advice would be most appreciated.

  Hello James

  I'm really skeptical that someone can offer you here is specific information on compatible screens especially on any screen compatible Glossary for your laptop model. The page you found is very good. On the Internet you can find a lot of them. Be 100% sure that you buy the right one.

  I am not a technician, but I see no reason for the improvement of the system because of the new LCD. If the dealer offer a compatible display I see no reason why you should not believe them.

• With Satellite Pro M-series LCD projector problems

  Hello

  I use a Toshiba Satellite Pro M series for more than a year. I would like an answer to a problem that I've had since I bought my laptop. When I use a LCD (beemer) projector to watch movies on the big screen, he seems to be a problem. When I choose to show my desktop on screen you there is no problem. When I open a video file, divx or just a DVD I can see the movie on the screen of my laptop, but I don't see on the projection screen. It is only black. When I choose the mode full screen, there is always the same prob. Very strange because when I chose the projector as 2nd screen and I slide the film into the second screen, I can see the movie on the projection screen. The only thing that I hate divx and mediaplayers readers when you select full screen on the second screen, the film jumps on the first screen (the one on my laptop). I tried all the codecs and other things. Nothing seems to work.

  Has anyone treats these problems before? Please let me know if anyone knows how to solve this problem.

  Kind regards
  Compton

  Hi refill,

  I thinnk it may be a driver configuration problem, but to solve it, I need to know what mobile phone do you use?

  Satellite Pro M?

  Also would be nice to know what operating system is runing (OS recovery or another image) and what version of driver display that you use!

  Goodbye Chris

• Satellite Pro A100-622 lcd screen switch

  Hello

  can anyone tell me where the switch that turns off the display when you close the lid, or sensor or anything that turns the unit off.

  my screen stays on when closed after that I adapted a new Panel lcd, inverter and cable.

  Thank you.

  First of all, check that Windows is configured to do something when the lid is closed. Perhaps, it is set to "do nothing".

  I think it has a magnet near the LCD that triggers a sensor in the base (and possibly the motherboard).

• Satellite Pro A10: What LCD I can buy?

  Hello!

  I recently bought a Toshiba Satellite Pro A10 laptop PSA15E-01PFQ-FR model number, but it is without display.
  Can someone tell me what LCD I can buy? All I know is that it must be 14.1 "TFT.

  Bart

  Hello

  I discovered that the part number is P000379740. Google a bit and you will find useful information and also a few online suppliers.

  Good luck!

• Satellite Pro L300 1AI LCD screen backlight not working not

  Hi all

  I have a Satellite Pro L300 1AI running Windows Vista the computer starts and works fine but the backlight on the screen doesn't seem to work.

  Y at - it none of the Vista settings that can affect this (other than the Fn key command on the keyboard and settings) in Control Panel? Strangely, it seems to have happened since I installed Skype but I don't see how this could possibly affect it.

  Any help is much appreciated...

  Hello

  What s wrong exactly? Brightness screen laptop s is too low?
  Everything you see on the screen as behind a thick fog?

  Well, usually the FL Inverter control the backlight of the screen and if the FL inverter starts to malfunction, so you would get the problem like this.

  There is no alternative to replace this inverter FL.
  It s a small part behind the frame of the screen I think that it s a job for a technician in ASP.

  Welcome them

• Satellite Pro 6000 - new RAM does not work

  Hi all

  New to this forum sorry if this was asked before, I did a search but could not find anything so here goes.

  I just bought a new RAM for my Satellite Pro 6000. When I install it nothing happens the laptop won't boot. If I put the old stick in no problem. The ram I bought is unb 512 MB PC133 CL3 and old RAM 256 MB PC133s. I think little small to read with these old eyes.

  I was told I might need an update of the BIOS but cannot find one for my laptop under 1.4 for the moment.
  Any help would be thank Lindsey

  I think that the new RAM is not compatible with the motherboard or laptop.

  The manufacturing of the new RAM you said does not for me so I would buy an another RAM, such as Kingston. Kingston makes high quality RAM and many users here buy Kingston RAM to upgrade its RAM.

  By the way: do you use the RAM or only the new? Normally, if you use two memory modules live, you must use it with the same specifications.

  The update of the BIOS, you can find the Toshiba site, but this doesn t affect the compatibility of Aries.

• Satellite Pro A10: New card wireless Atheros/Askey, but "this device cannot start" code 10

  Hello

  I have a Satellite Pro A10 and bought an internal pci wireless adapter. The following information is displayed on my card:

  Askey WLL3070-D4 (MOW)
  Atheros AR5BRB-43

  I installed the card, attached to the ariel and turned on the laptop... the switch at the front lights up now and Windows xp detects the new ethernet adapter. My problem is the following...

  Any driver I install (and Ive tried all the drivers of the first 20 + pages of yahoo/google Askey/Atheros etc.) the card installs very well but then in device manager has a yellow! next to him and says this device cannot start (code 10)

  I am really puzzled. I have little ram more to come in the next few days how I am installng Vista im hoping sort my problems, but someone has any ideas?

  I have not yet find a driver which specifically refers to the AR5BRB or the WLL3070-D4 model number.

  Does anyone have a location for a pilot, etc.?

  Thank you

  Hello

  I always use this page for WLan driver update:
  http://APS.toshiba-tro.de/WLAN/

  It is a Toshiba WLan driver portal and you will find all the necessary drivers for WLan

  Ciao

• Satellite Pro M30: new HARD drive - what is the max capacity?

  Hello

  My Toshiba Satellite Pro M30 is 4 years old with a 60 GB hard drive (IDE).
  I would like to replace the hard drive with a bigger. What is the best? (BIOS version 1.70, Windows XP Pro SP 3).

  I would be happy not only to get the answer to my question but alos to where I might find the answer myself.

  Thanks and greetings
  waltgallus

  Hello

  As far as I know the laptop is equipped with an ATA-100 IDE / ATA-6 HARD drive controller.
  In this case, you will need to use the 2.5 IDE HARD drive.

  I know with certainty that this notebook would support 80 GB HDD, but generally a larger HARD drive should also be possible because the controller is able to manage the 48-bit LBA.
  The 48-bit LBA can handle hard drives of more than 120GB.

  In my opinion, you can try a 120 GB and also 160 GB HARD drive should be possible.

• Satellite Pro A200 - new RAM work together

  Laptop Toshiba Satellite Pro A200-PSAF1A-003002, I bought the year last with RAM 2x512MB that I try to update my 3 GB RAM and I bought 2 RAM KTT667D2 / 1 G & KTT667D2 / 2G Kingston memory.

  I added that the 2 strips of RAM in the laptop, but it does not start. The power and the drive lights and flash for 3 times everything off. No boot. But I remove one of the sticks of RAM and it starts very well and the RAM has been upgraded in the system.

  I tried with the sticks and the two slots to remove 'bad slot' ideas and a stick of RAM works in a thin slot. Paste works in slot 1 or slot 2 and stick b works in slot 1 or 2, but not both at the same time. Is it simply a setting I'm missing somewhere? I checked the BIOS version is 1.7, I need to update my BIOS? Help, please

  Thank you
  Yana

  I think that the modules are not compatible together and that is the reason why each module works in each slot.

  Did you buy KTT667D2/1 and KTT667D2 / 2G. Different modules of s and are not working together.
  You should buy only the modules with the same specifications and capacity (for example, 2x1GB and 2x2gb).

• Satellite Pro L20: New need recovery CD

  I bought a satellite pro L20 and lent it to a friend of mine borrow. When he returned the laptop it was full of viruses and had to be wiped.
  I lost the disc of recovery or whatever is needed and I now have a laptop with no sound and wireless.

  Can someone help please I tried to download the drivers and they do not work and I sent toshiba and they have not responded.
  Thank you very much.
  My email address is [email protected] if anyone has a spare recovery cd...

  Hi Jonathan

  It s not very serious problem if you have lost the recovery CD. The partner of Toshiba service in your country offers all compatible devices and parts, also the CD.
  You can order the CD from this service partner.

  Good bye.

• Satellite A300D-15B - new LCD screen

  I need to buy a new LCD screen. I'm looking on the internet and this is the same screen 15,4 "but the resolution is 1280 x 800, but on the Toshiba site the resolution of this laptop is 1 440 x 900.

  If this will work?

  Hey Buddy,

  I'm not sure on this subject but in your case, I would buy an LCD with the same screen resolution.

  Also, don't forget that not all LCDs will be adapted so you should ask a service provider authorized in your country. Guys can order spare parts Toshiba and exchange it because that's not easy.

• Satellite Pro A200 - new ODD ignors the recovery disk

  Hello

  _Satellite pro A200-PSAE4E Windows XP_

  I started having bad 'not ready' system on the STRANGE original errors. Report of Toshiba Disc Creator: TSSTcorp CDDVDW TS-L632H TO01. I tried the FW update, but that did not help.

  I replaced the STRANGE with a new Amazon. Report of Toshiba Disc Creator: TSSTcorp CDDVDW TS-L632H SC04. The STRANGE news is listed as appropriate in the manual - it is the same model as the original. The STRANGE new works fine for normal use in XP. But when I try to use the recovery disk, it is ignored and XP always starts on the HARD drive. And when I press F12 during startup, the STRANGE news is not listed.

  Can you help me get the STRANGE recognized at boot time, please?

  Thank you.

  Mike

  Hello

  Have you ever tried to load the settings by default in the BIOS and is it recognized in the BIOS setup? The default values of the BIOS, you can load if you go into the BIOS, press the F9 key and save & exit the BIOS Setup. Then, restart the computer and try again to start from ODD.
  Can you change the boot order and set the STRANGE as first boot device?

  If it doesn t help I'll try a BIOS update. The most recent BIOS can be downloaded on the official website of Toshiba.

  But it s really strange the player works fine on XP, but you can start with him t

• Satellite Pro A200 - need LCD bezel and cover

  Unfortunately my LCD bezel and cover (cover / back) is broken. I'm looking for replacements, but cannot find the right one. I am able to use the parties such as the a205, 210 series etc Pro and any other series which is compatible for me?

  Hi caribman,

  Have Hmm already you contacted an authorized service provider? Usually guys can order all spare parts Toshiba so I'm sure they can order the right parts for you.

  Here is a list of them, just get in touch with the guys:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

• Satellite Pro 2100 - new HARD drive is not booting

  Hello
  I wanted to update my SP2100 with a WD1200BEVE. (120 GB of WD).

  Copy of disk via USB + speakers worked, but after changing the disc nine does not start: the laptop hangs up with blinking cursor.
  Already checked that the partition is active and even a new installation from a CD of XP has the same result! The BIOS seems to accept the drive (if not installing via CD should have failed) so where is the problem?

  Any tips?

  Hi Kannengiesser,

  Which is really strange that you can t start up disk even it s recognized in BIOS correctly...

  You have the Toshiba Recovery disk? If so, you can try this disc factory settings. If it works, it was just an installation problem.

  But I couldn't imagine also that the new HARD drive is not working properly last week I had a similar problem. Made a HARD drive upgrade, but a few days later Windows didn't start because the HARD drive had a bad sector, now I'm waiting for a replacement drive.