Satellite Pro M30 - menu Windows cannot start

Similar Questions

• Satellite Pro R50-B-12U - cannot start some application

  I have a new laptop Satellite Pro R50-B-12U. When I put in place, I gave my name and my password when you are prompted.
  I installed HMRC PAYETOOLS-RTI, but cannot enter it as a box arrives with 'You may need to check if you are allowed access to the following location on this computer' assistance please contact the manufacturer of your computer or your COMPUTER person support.

  I don't understand why I get that I have not set up a separate administrator and user.
  There is only me. I can use the program without any problem on my old laptop.

  Please help a user computer very not warned!

  This application is not known to me, but I think you should check the application developer / support manufacturer page how to install this software...

  It seems that there is a location on the HARD disk that is not available for a common user...

  But generally, you can start each application with the admin rights.

  Right click on the exe file and in the Security tab, you will see that access to the right for all users of accounts available on your laptop.

• Satellite Pro A300 - driver Webcam cannot start under Win 7

  Recently bought a satellite Pro A300 and immediately updated from Vista to Win7 Pro Bus.
  Do not use webcam before upgrade.

  After upgrade, after downloading and installing the Toshiba Chicony webcam software, continually get message "Webcam driver open fail." "Please restart camera or computer.
  Camera appears in Device Manager and says driver is a Microsoft 6.1.7600.16385 driver v dated 06/21/06 (very pre-Win7!).

  Have you tried unistalling/reinstalling software camera assistant with and without first uninstalling the program camera in Device Manager, but the same error message comes back every time. I would appreciate suggestions for a fix.

  Hello

  In your case, I would try to install the latest driver for the webcam of Toshiba. Install this driver and try again. Also, make sure that this latest version of the BIOS is installed for your laptop.

  In addition, it would be interesting to know if the same problem happens on Vista. You should try it with the factory settings. So that you can identify if it s a hardware or software problem.

• Satellite Pro P300-19 q - cannot start with a new memory

  So, I want to add 2 GB of RAM to 2 GB existing. I use Windows 7 64-bit. In the BIOS, I see 4 GB of memory, but windows won't start.

  When removing the old memory and leaving the new, the computer isn't even strats. Some info:
  Old memory - Samsung M4 70T5663QZ3-CF7 2 GB DDR2 - 800 DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz)
  New memory - Spectek DDR2 2 GB PC6400 800 MHz 200 pin

  So, what's the problem? And what can I do?
  Thank you

  Hello

  Theoretically, it should be possible to use 4 GB in this notebook.

  The new RAM is the manufacturing of Spectek. This production does not for me. For me, looks not dear noname module.

  I always use Kingston modules to upgrade my laptop. I've never had any problems with these modules, so you should try it to.
  I think that the new module isn't compatible with your laptop.

• Toshiba Satellite Pro M30 & Power Saver stop error

  Hello!

  I am struggling with this problem for months... the latest version of Eve on my toshiba satellite pro m30 running windows xp with service pack 1 installed gives a message box with an error message when the stop and I'm unable to eliminate this error. Unfortunately, I can't consider reinstall the system from scratch, because there are many other applications installed and I can't lose the settings for them. I read the forums and realized I'm not one of the problems with toshiba power saver. I'm even lucky to successfully at startup started it! Yet, it hangs at shutdown. It's pretty boring. also, I downloaded all the latest updates of this site for my laptop, including even the bios update.

  I would like the opportunity to be able to download the version without toshiba this site energy saving bug, and I'm sure many other people would appreciate the patch too!

  any comment on that?

  Andrew.

  Hello

  If your laptop is installed correctly it should work well. All the software has been tested. The only reason for your problem may be additional software that you have installed later.

  It is also possible that it may be caused by an Antivirus application. Maybe an application runs in the background? There are many reasons that may be responsible for this problem.

  If you reinstall your Notebook of recovery CD it will not work properly. It is very unjustifiable to write on some versions bug-free. I sometimes have problems with BONES, but almost always after using some freeware.

  Good bye

• Satellite Pro M30: Needs to win 7 SD card reader driver

  Hello

  I've updated my old Satellite Pro M30 of Windows XP to Windows 7.
  Everything is OK, but I have problems withs pilots 'SD card driver ". I can't find something that works... I tried with WinXP old ones but do not work.

  I downloaded those from Toshiba, but when everything is installed and I put the SD card, I and alert on Device Manager that says "conflict resources" error code 12.
  Toshiba SD Card Controller Type A
  Toshiba SD memory card reader

  What is the right driver? PLEASEEE

  > Everything is OK, but I have problems withs pilots 'SD card driver ". I can't find something that works... I tried with WinXP old ones, but do not work

  Win XP drivers do not work with Win 7, but you should try some drivers for Vista.
  Try some drivers released for other series...

  Also try this:

  You can go to Device Manager-> properties-> Details tab SC card reader

  You can find something like that.
  PCI\VEN_1217 & DEV_7120

  FRI means provider
  DEV: device

  Then, you can find the identification numbers using this database of the PC:
  http://www.PCIDatabase.com/

  This help to find the pilot!

• HL-DT-ST DVDRAM GT80N "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  I ran provided patches I've uninstalled and restarted. Attempted to update the drivers. I can not get my DVD/ROM to work I have a Toshiba Satellite S855 S5381

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  HL-DT-ST DVDRAM GT80N

  I have windows 8

  How can I erase my registry and start all over again? What exactly I'm looking for?  I found a post for the same problem on a different model, but I can not located what was discussed.   My computer has been used since the beginning of February.  I need to install programs and others.

  I have fished all day found this and it fixed it!

  http://support.Microsoft.com/mats/hardware_device_problems

  Thank you for your help :)

• Satellite M30: Windows cannot start because a file is missing

  Error message: Windows cannot start because a file is missing.
  \Windows\system32\config\system

  You can repair from ordinary cd and use "r" for repair.

  How to use recovery cd for this... It does not work.

  Hello

  It's not easy to use the repair mode because the recovery image file CD. The other way is that you try to start the operating system is the safe mode and look if the lack of files exist in the C:\I386 folder. If not, well I think that the only way is to recover the system with the recovery CD.

  Good bye

• Satellite Pro M30 - cannot install audio driver

  Hello

  I have a Satellite Pro M30 which usaed work properly but I can install more drivers sound card is on.

  I think it happened because we have reinstalled windows XP Pro with SP2, but may not be some.
  He is installing drivers Sigmatel AVC97 and comes up with the following error.

  Parameter invalid operating system or this installer does not support this operating system

  Any suggestions because it does appear that a driver for the family of SPM30.

  Hello

  Try to install the driver using another medium facility.
  To DO this in the Device Manager.
  Mark the sound card and use the option to update the driver.
  Then, use the advanced option and indicate the location where the driver audio was stored on the HARD drive.

  Please note; You must decompress the audio driver package before installing

• Satellite Pro M30 and start USB HDD

  Hello everyone.

  Is it possible for a Satellite Pro M30 (Bios version 1.70) to boot via USB HDD?

  Thank you
  Vittorio

  Hello

  No, the upgrade of the BIOS will change any possibility of starting.

• A satellite starts no-Windows cannot start

  I had an update for windows internet explorer, but he has never started to download and I couldn't close the download window.
  Then my phone froze so I turned off and tried to restart.

  It comes up with all kinds of options but not work they freeze or at the end, reboot the laptop, and then he says: windows cannot start and it does a check but it stil does not work.

  Please help its days only 20 years.

  Hello

  You can try to start your computer in SafeMode (F8) and start the laptop computer use option systemrestore and restore the operating system time earlier before do you this update.
  Maybe this will help.

  If this isn't the case, I advise you to install the new OS by using recovery image. If you have any new laptop you can do this using the F8 option to fix my computer.

  If you need more help how to do it please let us know.

• Satellite Pro M30: connection problem!

  Hello

  After I connect to the Internet via modem, the machine (specifically, the status bar) freezes. In addition, could not start the MSN (6.2). After about 10 minutes, the system works normally and very well. Help, please!

  Data sheet:
  Satellite Pro M30
  Centrino 1.6
  Windows XP, SP2

  Kind regards

  Hello
  check your XP firewall settings?

  If the firewall is active, no program could pass the wall!

  Good bye

• Satellite Pro M30 Win 7 - webcam does not work on msn messenger

  Hi all

  I have a Satellite Pro M30 Modell Nr.: PSM35E and just changed to Windows 7. But put him Nvidia card NVIDIA GeForceTM FX Go5200 Grafik 64 MB of RAM is not working properly.

  I could find a Vista driver and installed, have Aero + photos on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.

  Can someone help me?

  Thanks for your help

  Hello

  I m a bit confused; you have some problems with the graphics card or with the webcam?

  I assume you mean on external webcam connected to the USB port? Right?
  What happens if you connect the webcam to the laptop? Can win 7 recognize the device? Have you installed additional drivers for this webcam?
  Most of the time it s necessary to do so because I think that it s not Plug & Play device.

• Toshiba satellite pro m30 USB problem

  I have toshiba satellite pro m30 and HP scanjet 4600 scanner.when I connect the scanner directly to the notebok with its ' original usb cable there is no problem. But if I connect the scanner to the laptop with a laptop usb extension cable cannot initialize the scanner. There is no problem if I connect the scanner to the VAIO laptop with usb extension cable. What can I do?

  Hello

  could you describe the difference between the original USB cable and the USB extension cable?

  The laptop and the printer works correctly with the original USB cable, but it seems that the extension USB cable is an inexpensive which does not fulfill the technical specifications and the laptop has a problem with this issue.

  To solve the problem in my opinion you could do an update of the BIOS, look if for your printer is a new driver available and reinstall the USB drivers.

  Also, you could test whether USB, the same problem occurs with other cables.

  Bye Bob

• Boot of satellite Pro M30 SD card

  I have a satellite pro M30 with a 40 GB HDD (and no FDD), which I need to partition (using Partition Magic 8.0).

  IS IT POSSIBLE TO MAKE THE SYSTEM TO BOOT FROM SD CARD?

  Is it possible to put the discs recovery partition on SD cards and be able to perform a recovery from the internal SD card drive partition?

  would it not possible to put Windows XP Pro startup disks on SD cards too?

  Jerry Black

  Hello

  It is not possible to change the bootpriority of a Phoenix Bios (-Toshiba) on the SD card.
  Sorry no chance for it.

  My Tecra M2 also has the ability to boot from an SD card.

  Good bye