Overheated computer, laptop CQ61, now "the hard disk does not exist '.

Similar Questions

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Satellite P300 - 190 PSPC2C - water spill and the HARD disk does not appear on the Setup

  Hello

  Spilled water on the keyboard. Laptop has stopped working.
  Dried, but did not recognize the HDD start up and HDD does not Set - up.
  Moved the HARD drive to another location of the HARD drive on the laptop and it appears at startup and boot OK.
  Is there an easy way to find and repair the defective HARD drive slot?

  Thanks for any help.

  PK

  Hello

  The HARD drive slot is not repairable. It s a HARD disk controller and I guess the HARD disk controller is dead.
  The HARD disk controller is part of the motherboard and if you want to repair it, so the entire motherboard must be replaced.

  New motherboard would cost a small fortune he of not good about market 350Euros
  That's why I put t think it is s to replace the mobo only to get the HARD drive in the first location of work

  This is my personal opinion...

• device not found Boot, hard disk does not exist... does that mean my computer is dead?

  Suspecting that Im in a world of pain here. I tried to turn on my computer and it says "boot device not found" - performed in test failed... when I hit F4 and test drive, he said "there is no hard drive. The test of memory passes, but under the boot device not found says blue "Please install an operating system on your hard drive"... and to make matters worse he makes funny sounds when he tries to start.

  Is there no hope at all that this computer working again? Is there a chance that everything I had on my hard drive can be recovered?

  You are the very welcome, Jonathan.

  dv5 is still not enough information to provide me with the service manual (in which case there is differerent for different dv5 models).

  But here is the link to the service manual I've pulled at random.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01550108/c01550108.PDF

  Guess it's safe to say that all dv5 models come with the laptop SATA drives.

  So, if you want to spring for $15, you can get this place that apparently has very good reviews.

  http://www.Newegg.com/product/product.aspx?item=N82E16817182138

  From what you describe (noise and other things), I would say that you don't have much chance of recovering the data, but it's up to you if you want to try the speaker or not.

  Here's what I recommend:

  Pull the hard drive and turn on the laptop.

  If the weird noise you heard has disappeared, then you can pretty much assume that the disc was the cause and replacing the disk and reinstalling the operating system will solve the problem.

  If the noise is still there, while there could be another problem, and it might be risky to throw good money after bad.

  Paul

• Tecra 8000: monitor and the HARD disk does not work - does not start

  I have a laptop Toshiba Tecra 8000 given to me the year last by my uncle. I live in England, but it is and bought the PC in Italy. I do not know if this causes complications, but I thought it may be useful.

  Since I got it it occasionally did not display any image of all system startup, so if I have given some time and restarted it would start working again. Happening of bagan more frequently and now I can't make it work. I have conections and found that everything was in place. Then he doesn't seem to be turning on, however when I replaced the front LED cable seems to be turning on and although I couldn't hear much the CPU was luminous heat. I opened the drive and it gave once more, succeeded him and he still wouldn't start. I had purchased and replaced the screws on the heatsink around this area but I did not handle it with many other things.

  So now, I have a monitor that does not work and a gard drive that won't start... Any ideas?

  Thank you!

  Hello

  Could be either the card mother, CPU or ram. The processor when it goes bad or is not locked in place (have had this before, install the CPU but forgot to turn the lock, so he cannot move) the computer will act as its startup, don't give any error and stay on a black screen. Verify that the processor is locked in place. Then remove the ram and try a stick of RAM that runs on another computer. If you try the RAM and the processor do not always start, then chances are your motherboard is dead and must be replaced. Hope this helps and that solve you the problem.

• I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate.

  I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
  I have an acer

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - XY9X3 - JDXYP-6CJ97
  The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
  Windows product ID: 89583-OEM-7332157-00211
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0 x 00000009
  Build lab: 6002.vistasp2_gdr.110617 - 0336
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF}1.9.0027.06.0.6002.2.00010300.2.0.003x 64*-*-*-*-6CJ9789583-OEM-7332157-002112S-1-5-21-923204104-223683984-168055983Acer Extensa 5630 Phoenix Technologies LTD.V1.30 20090319000000.000000 + 00070333507018400FA04090409US Mountain Standard Time(GMT-07:00)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
  Installation ID: 004511331255365043724851364501374781338933223323713385
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: 6CJ97
  License status: Notification
  Notification reason: 0xC004F063.

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CRESTLNE
  HPET INTEL CRESTLNE
  START PTLTD $SBFTBL$
  MCFG INTEL CRESTLNE
  SLIC ACRSYS ACRPRDCT
  ASF!            OEMID OEMTBL
  SSDT BrtRef DD01BRT
  SSDT BrtRef DD01BRT

  Ah! -in this case, it is not necessary.

  I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033

  Open the Windows Update - click the link view updates installed on the left of the page

  in the list, find the WAT update KB971033, and then uninstall it.

  Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033

  redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?

• photos should be on the hard disk and not a network before catalog reader can find them.

  My photos are on a network drive. I created a catalog on the hard drive of my computer of these photos. When I later open the catalog, Lightroom indicates that the file is not found. Photos should be on the hard disk and not a network before catalog reader can find them?

  "Can't find" indicates Lightroom does not know the location of the photo because it has been moved, deleted or renamed outside of Lightroom.

  To resolve this problem, follow these instructions: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  Photos can be on a network drive.

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• updates installed live mail and now the spell checker does not work

  updates installed live mail and now the spell checker does not work

  You will find support for Windows Live Mail in this forum: http://windowslivehelp.com/forums.aspx?forumid=b91657c9-9031-4406-a398-7d0783119bb7

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• C7280 Installation error: the specified service does not exist as an installed service

  All,

  I have an AIO C7280 printer that is connected wireless to my router.  I have a pc (Vista) cable and a laptop wireless (XP) connected to the router as well.  I have no impression of question from the pc.  However, when I try to install the driver on the laptop I get an error just after that he asked me if it's a USB drive or a network printer.  I chose the network and the error appears saying "the specified service does not exist as an installed service.  I ping the printer from the laptop so I know it can 'see '.  I don't know what to do.  I have uninstalled/reinstalled several times without success.  Can anyone help?

  Thank you.

  Edit for more information:

  After building a log of installation failure and 'details', that's what I see:

  Error Situation code: 20364041

  Now Launching = X:\hpzdui01.exe - gateoncmdline easyinstall | XXX f X:\hpoins21.dat-valider No.

  LaunchNetworkInstall retrieves the value unexpected 1060

  RUN: 50 return stops Driver UI plugin

  Exit code = 50

  Message edited by gatorman on 09/18/2009 16:57
  Message edited by gatorman on 09/18/2009 17:10

  The service that the error message refers is the HP network devices support service. Try this...

  Open the contents of the installation CD, and then open the file "setup." Now you will find either a folder named 'netdevicemanager' or simply 'network '. Open if it is present. Now there should be a file with the same name as the file, but with extension .msi. Right-click on this file and click on uninstall. If you get a message stating that the action applies only to products that have been installed, and then click OK. Restart the computer IF necessary. Now, right-click on the file and click on install. Installation do not normally present a window of 'success' You will just see a bar of progress for a few seconds and disappear. Once this happens, restart the PC and check if the HP Network Device Support or similar service appeared in the list of services. If Yes, then reinstall the software, and it should install correctly.

• Cannot install the printer. The print processor does not exist.

  Windows 7 Enterprise 64 bit.  I am able to install HP LaserJet printers but no virtual printer.  I can not load the XPS from Windows printer or Print to OneNote.  I also tried to load more than one PDF printer and none of them work.  The error I keep gettig to "cannot install the printer.  The print processor does not exist. »

  Any ideas would be appreciated.

  My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.

  Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction.   We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.

  [Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]

  You wanted to post this in case someone else ran into a similar problem.

  This is what worked for me.

  I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).

  Step 1: Stop the print spooler service.

  Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.

  Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.

  Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.

  Step 5: Start the print spooler service.

  Try to connect or install your net printer and it should work now.

  I hope this work for all of you.

• The specified service does not exist as an installed service

  Recently I seem to have problem with every thing in my laptop under windows vistas. When I try to open any program such as device 1 Manager) 2) install/uninstall any program 3) manage computer 4) remove a printer, etc., it gives only the error "the specified service does not exist as an installed service. I am unable to set something good with my computer. the system tray has the error "The Audio Service is not running". The windows update is on and its updates up to today date from the. I can't even install the 'Active X' in IE8.
  Even when I open MS office like word or execl program opens a file, but it takes 5 minutes to get active average as it opens, it gets busy. We can open other programs, but not MS office program.

  Good advice to set this right. Thank you and best regards.

  Hi Dilippatel,

  A. when it last work very well?
  B. recent changes made on your computer?
  C. who is the manufacturer of your computer?

  Try the following steps.

  Step 1 : clean boot

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.  To perform the clean boot procedure, follow the instructions in the link below.

  1: perform a clean boot
  2: enable half the services
  3: determine whether the problem returns
  4: enable half of the startup items
  5: determine whether the problem returns
  6: solve the problem
  7: reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode. Uninstall or update the program that is causing the problem.

  Step 2:

  1. click on start.

  2. type regedit in the search box start and press to enter.

  3. navigate to the location:
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BBBFC1-08002BE10318}

  4 remove the LowerFilters value in the right panel. (NOTE: under the key, it)
  are also some sub keys for example 0000, 0001. Please, double click it and remove the
  LowerFilters value.)

  5 restart the computer and check if the problem persists.

  Important this article contains information about how to edit the registry. Make sure that you back up the registry before you edit it. Make sure you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

  Try these steps and let us know the result.

  Please post you rquestion in the discussion group of the Office for issues related to Microsoft Office.
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• The specified domain does not exist or could not be contacted.

  Last night I completely disconnected my laptop. This morning when I turned on the machine, she does everything as planned. When I reached the screen that requires a password to connect to Windows, the following error message came after I saw that my password and press ENTER.

  The specified domain does not exist or could not be contacted.

  I use Windows Vista Ultimate and the laptop connected to a wireless router.

  I tried to restart and stop several times. It did not work. I did a Diagnostic Windows memory check and it went well. Also, I restarted Windows in Safe Mode and some other modes and received the same exact error message.

  Thanks in advance for your answers!

  Dan

  Hello
   
  1. don't you make changes before the show?
  2. is the laptop connected to a domain or have you tried to connect to a domain?
  3. you have to any other user account on the laptop?
   
  If you have any other user account on the laptop, try logging in there and see if the problem still occurs. If you are able to connect, sever the computer from the domain. Try the following steps to separate the field.
  1. right click on computer from the start menu, click Properties, click Advanced system settings, the computer name, change, select workgroup and workgroup name type.  Click Ok. You will need the necessary permissions to perform this task.
  
  If the computer is not connected to a domain and you have not made any changes recently. Try to restore the system using Vista DVD.
  To run the restore of the system using Vista DVD, try the following steps.
  1. start in Vista installation DVD.
  2. choose your language settings, and click Next.
  3. click on repair your computer.
  4. choose your operating system and click Next. This should bring up the System Recovery Options.
  5. click on system restore.
  6. follow the instructions in the wizard to complete the task.
  7. once the system restore is complete, start the computer as usual and try to connect.
   
  For more information on the Windows recovery environment options, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
   
  Try the steps and post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Gets the error in Windows Denfender for "the specified service does not exist as an installed device (error Code: 0 x 80070424).

  My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.

  Hello

  Windows Defender is an antispyware software, not an Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And try this method for the analysis of Malware

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Vista the specified domain does not exist or could not be contacted

  Hello

  I recently had problems with viruses etc on my computer and because of its extremely slow performance I want to re install windows vista to make it to its factory settings.  I use a laptop HP 530 which has a HP Backup and Recovery utility, which is able to reinstall windows by using the backup that is held on a separate partition.  My computer is not outside of a work group and I'm the only user on the computer with full administrator privileges.  I know also that the password of my account and mine is the only account set up on the system.
  However, when you attempt to reinstall Vista, when the computer restarts at the beginning I wonder put a username and password.  I tried to leave this blank, enter the username and password for my account and nothing else I can think of.  Annoyingly. I get the error message "the specified domain does not exist or could not be contacted" every time and so I am unable to reinstall windows because I can't get past.  I reinstalled windows in the past and never encountered this problem.  As far as I know that I did not recently, major changes on the system other than the elimination of viruses etc.
  If someone could help me with this, I would greatly appreciate!
  Graham

  Hello

  you restart and press F11 to start the process of restoring HP

  and follow the instructions from HP