Satellite Pro - Windows error serious WARNING

Similar Questions

• Satellite Pro A200 error (PSAE4E) during the firmware update Disc Creator

  Hello

  I get the following errors when you try to update firmware for Disc Creator I use Windows VIsta Home Premium.

  An unexpected error has occurred.
  Error code: 32007C-26-00000015

  Followed by:
  Error code: 320129-26-00000015 - then application goes down.

  All solutions to this
  Thank you

  Hi guys

  I'm a bit confused of m.

  > when you try to update firmware for Disc Creator
  Where did you get the firmware update for Toshiba Disc Creator?

  I checked the page European driver Toshiba and Satellite Pro A200 (PSAE4E) download area and, unfortunately, I didn t find updates for Toshiba Disc Creator.

  So I really wonder about this problem. He s strange

• Satellite Pro M30 descending without warning

  Hello

  My old one year Toshiba Satellite Pro with a card his Sigma such C - Major DIES many times when I start a good intensive application, such as Sound Forge, or Windows Media Player or a game like GTA Vice City or Return to Castle Wolfenstein and much more, the computer just turned off, instantly. Dead. Without any warning. At this point, something sticks in memory because he did re - will not power switch start.

  No, remove the battery and unplug the power cord and then putting them back in. This happens maybe every third or fourth time, but only with a program that plays music or some sort of sound effect. Can anyone help?

  Hello

  I have the same opinion as TOM. It is possible that the overheating is responsible for laptop, closing. If the processor is very hot and before it can be damaged the protection mechanism, switch off the appliance. I'm sure that the device must be cleaned and after that the heat can be removed from the unit.

  If there is no way to clean only contact service partner in your country.

• Satellite Pro 4300: error - NTLDR missing

  Hi all

  I have an old Satellite Pro 4360, P3 700 mhz.
  I'm trying to upgrade the Bios to install Ubuntu Linux.

  However, by following the instructions on the download of Toshiba Bios, IE change the boot sequence for the floppy drive with the disc in the drive that contains the update files, I can't update and just got the message:

  NTLDR missing

  Someone help with this?

  Also, when I try to run the live CD, after changing the boot sequence in the CD-ROM, I get no response and the computer continues to boot from the disk with Windows 2000 Pro?

  Someone help with this?

  Hello

  "NTLDR is missing" usually means that the "NT Loader" of an operating system with the kernel NT or NT-technology cannot start the operating system. (Such system NT could be Win NT, Win XP or Win 200o)

  But it s strange when a drive reports an error message. What was on the disk before? Was the drive some disk before starting? If so, then proceed as follows:

  Format the drive in Windows 2000 with the option to make a disk and copy the files from the BIOS on this subject. Then boot from the disk and update your BIOS. Ususally it should work.

  Please give a few comments if you managed...

  Welcome them

• Satellite Pro A40: error message - cooling problems

  I have a Satellite Pro A40.
  I cleaned the cooling circuit (hose and cooling fan), after hearing a strange noise from the cooling fan.
  After cleaning the system, the error message "you have cooling shut down your computer and bring it to a service center" is displayed.
  The fan operates at a low level, but do not accelerate as usual after opening several applications.
  In this case, the error message is displayed and the system becomes extremely slow.

  Thanks in advance for your advice

  Concerning

  Hello

  sounds, something was wrong after cleaning. I recommend you to send your machine immediately to a service partner and let it check your machine because the laptop might have some serious hardware malfunction.

  Before you send your machine for them, I would check the cooling fan cable and attach, maybe this could remove the error message.

  If you need to find an ASP then click [HERE | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT] and find one that is closest to your country.

  Welcome and good luck :)

• Satellite Pro A210 - error recovery after a new installation of HARD drive

  Hello

  I have a satellite pro 210 (bios v1.6) has died the HARD drive.

  I bought a new WD Scorpio Blue 250 GB HARD drive and ran the reinstall drive (I've done exactly this for a friends Equium a month or so back and all worked flawlessy!)

  Everything worked fine until the first re-boot, went through the usual stuff:
  Please wait a moment while windows starts for the first time
  Then a windows background, spinning slider with waiting message please, much HDD activity
  Then the sudden error:
  "Installation of Windows could not configure windows to run on a hardware on this computer."

  Does anyone have ideas, what it might be?
  A google search suggests the sata bios settings, but I do not see in the configuration of the bios page.
  In my view, there is a new bios v2 by download - would this help?
  If so how can I install it when the computer does not start vista? Or any other suggestions?

  Thanks for reading.

  Cheers, Stephen

  Hello

  The SATA driver is not necessary if you use the Toshiba Recovery disk because the image on the recovery disk contains the SATA driver.
  So there must be other reason for it.

  In your case, I recommend setting the BIOS settings by default and start over once the recovery procedure.
  Maybe something went wrong during the configuration of the OS if second installation is worth a try

• Satellite Pro A300D - error during DVD playback

  Hello

  I have a problem with my satellite Pro A300-140 under Vista 32 - bit OS

  Whenever I try to watch a DVD I get an error message "unable to output the video to an external device. Please check the external output setting after the end of the application "-I don't mean to connect what - I want to just watch a movie!

  Ideas - I've read, it's a known issue, but I can not re - find information?

  Thank you

  Hello

  I don't know what the problem with your Dvd Player, try to open with Power Dvd, you can download

  http://www.CyberLink.com/products/PowerDVD/overview_en_US.html

  Just to check if it is software issue
  Welcome them

  Post edited by: Jeka-HE

• Satellite Pro M30 - error message: the user is not authorized to update BIOS

  Hello

  I bought a Satellite Pro M30 of second hand. This one has the Bios 1.30... I would like to install the bios v1.70.

  I am running Windows XP Pro SP3 and tried first update in Windows.
  I however got the message "the user is not allowed to update BIOS.

  This message is quite surprising given that I have administrator privileges.

  I read that you can use a floppy disk to update, but I did not...

  So, is it possible to update the Bios with the CD?

  See you soon,.
  R.S.

  Hello

  I checked the page European driver of Toshiba and found the version of BIOS 1.7 WIN in the field of ARCHIVES.

  As you can see, it's a version of BIOS Windows and not a traditional version of the BIOS (trad BIOS can be updated using the diskette).
  This BIOS win can be improved only from a running OS Win.

  In any case, I see that you have installed SP3. It could have a bad influence on the update of the BIOS.
  Then maybe you should try to update the BIOS without SP3 installed?

  Remove SP3, download the good BIOS, unzip correctly and then try to run the BIOS update file.

  _Ps: If you laptop then runs without problem a BIOS update is not necessary! _

  Concerning

• Satellite Pro A60: error code 11030 - invalid destination drive

  I have a satellite pro a60 and it won't let me do anything I have an error message 11030, - drive destination not valid. can someone please help me solve this! regards Jean

  Hello

  I read that this error can appear after using the Symantec ghost.
  Have you used this program?

  Try using the chkdsk command or try to run the error checking that you can find in the properties of the HARD drive.

• Satellite Pro M35E - error graphics card 10 - where to find the graphics driver?

  Hi guys hope you can help.

  I have a Satellite Pro M35E PSM35E-002EE-AR
  My video card plays up there 10 saying error this device cannot start my screen. He has lines on the screen.
  First of all, I can t find drivers for my video card so that I can install them again.
  So where can I find them?
  NVIDIA takes back me to Toshiba and Toshiba doesn t seem to have Web sites here.

  My second question is; to install the drivers again will correct the error 10?

  All welcome responses
  Thanks in advance

  mhh a strange behavior

  in any case

  Here the driver
  http://Support1.toshiba-tro.de/Tedd-files2/0/display-20080421144816.zip

  I don't know if the driver will fix this problem... but try it and you'll see.

  CU

• Satellite Pro U300: Error Message: cable is disconnected, but Lan cable is connected

  Hello

  I have problem with interface ethernet (wired) in my Satellite Pro U300. I use in many places (home, office, customers) and when I restore in sleep or hibernation mode interface ethernet shows that the * cable is disconnected *, despite the connection of the cable * is * connected and works perfectly with all other devices, laptops and PC.

  The switch also shows that the there no signal link. But re - activate the malfunctioning ethernet port, just disable the ethernet interface and then after 5s (1 s is too short!) turn on.

  Then a baloon in taskbar window indicates that there are 10 Mbit/s link, but actually, the link works at 100 Mbps (I can see it in the connection status window and the ethernet LEDs switch). This is the only laptop that has this kind of problems.

  I have the latest version of the installed ethernet 5.664.205.2007 driver on Win XP SP2.

  Is it possible I'm getting rid of turn on interface ethernet several times per day (except change laptop)?

  Hello

  I put t have a real solution but I have a few proposals of solution

  First of all, you should check in Device Manager if the network card has been properly recognized. The Ethernet card should be listed under network without any yellow exclamation point cards.

  If the network adapter has been properly recognized, then the next step should be checking the properties of the LAN connection.
  There, you should check the properties of the TCP/IP protocol.
  The settings such as IP address automatically get & address of DNS server automatically get must be marked.

  Greetings

• Satellite Pro P300: Error after installation of battery 8.00.02 BT WIN 7 32-bit

  I upgraded my Satellite Pro P300 Vista Win7 Pro 32-bit.
  The programs and existing drivers had (compatibility) problem with Win 7 whitch is indicated when installing Win 7 Pro 32-bit.
  So I download and install this new battery.

  In the peripheral equipment there are a 3-port BT. But the software (settings, communications, etc.) does not start...

  for example: BtAssist.exe - failed to execute (Dutch: toepassingsfout), may not start successfully this applicaton (0xc00000be, click Ok to exit).

  Someone at - it ideas?
  Everything worked fine before installen Win 7.

  Thanks already

  Eric

  Hello

  You did a clean install of Windows 7, or you have upgraded the Vista to Win 7?

  I recommend a new installation of Windows 7. It's better, because an upgrade from Vista to Windows 7 could leave some junk on the HARD drive and some tools/drivers Vista is not compatible with Win 7 OS.

  So to do a clean install of Windows 7, then download and install the new BT stack from this page:
  http://APS2.toshiba-tro.de/Bluetooth/

  Good luck

• Satellite Pro A120 - error function keys not working and affected

  I have a Satellite Pro A120 PSAC1E-04Q00VEN.

  A couple of weeks, I started to have a dialog "Error of TouchED" to come to the start box (containing the message: 'Thotkey' recovery has no code error 0 X 00031402, 0x00000002) and at the same time the function keys did not work.

  I spent several hours as a result of the wide variety of questions that have been posted on this forum and elsewhere regarding this problem with computers laptop Toshiba, but nothing has worked. I reinstalled all the drivers from my initial backup disk, installed new drivers on the Toshiba site, updated the bios and restored the system to date before the problem started to occur. I also can't find Thotkey.exe everywhere on my machine.

  Can anyone help with this? It seems to be a common problem, for which he doesn't seem to be a definitive answer. Any useful response would be really appreciated.

  David

  Hey Buddy

  Go to the page of European driver of Toshiba.
  Select your laptop model and download and reinstall the tools and the following drivers:
  -Common module
  -Utilities for display devices Hotkey
  -Utilities
  -Wireless keyboard shortcut

  Check it out!

• Satellite Pro 6000: error LED message - what does this mean?

  Hello

  I have gad an old Toshiba Satellite Pro 6000. Sometimes, not after a period, he died. I have gad error code because the DC IN Red flashes orange. The blink rate is 1 x 3 long short 1 x length 2 x 1 short long = 10001001 in bin = 91 h (is this true?)

  Now 91 h ist the following error: 1R5 - E1V voltage is not more than 1.275V when the computer is turned on. But what the hell of this error means? What is 1R5 - E1V?

  Need help. Greetz

  Hello

  Read the code back!

  10001001 = 1001 0001 = 91 H
  http://www.prepressure.com/library/BinHex.htm

  I think there is something wrong with the electronics of the Board of Directors.
  Therefore, you will need to contact the ASP from Toshiba for help.

• Satellite Pro A300 - error - webcam driver open failed

  Hello

  I have the Satellite Pro A300
  The web cam stopped working after upgrading XP in Vista (webcam driver open fail.) Restart camera or computer)

  Any help

  Hello!

  I used the forum search and founded a good display of user Akuma.
  Maybe it's the s solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=136549

  Good luck!

  Good bye