Satellite R630-112 - gas station never showed any updated or an alert

Similar Questions

• Tecra S11 Bulletin Board doesn't show any updated drivers

  Hello

  Tecra S11 Bulletin Board is one of the best service I've ever had, but when I visit the page of the Toshiba driver, I found a few updated drivers, but the scoreboard does not show these updated drivers on my machine.
  Is this possible? or am I disabled something?

  > but when I visit the page of the Toshiba driver, I found a few updated drivers, but the scoreboard does not show these updated drivers on my machine. Is this possible? or I am disabled
  > something?

  Yes, it is possible. Personally, I've never used Bulletin Board removed since purchased my knees. Anyway, you can update drivers yourself

• Clock on Satellite M50D-A - 10 d never shows the correct time

  All the time I have set the clock in, it always goes bad after a short time.
  Even went into Bios and set the clock here very precisely, that it won't always.
  It isn't easy because all the documents that I work for the school are badly dated, changes, do not get sorted correctly and so on...

  What can I do to get the exact time? (and Yes, it is supposed to be set automatically by windows)

  Return the laptop and the set?

  concerning

  Hugo

  Could you please provide some essential info on the laptop model, the system and the version of the BIOS?
  Is the laptop connected to the internet or you are working offline.

  If the laptop is connected to internet, it synchronizes automatically time with server time of Windows and sometimes the clock doesn't see the good due to some problems.

  Probably you have already tried to change the time manually by clicking the change data and time settings. Right?

  Well, in the window of the Date and time you have 3 tabs. The last tab called time Internet provides sync settings. It displays information about the last synchronization and when happens the next synchronization. You will also see the server time is synchronized automatically. The current server should be time.windows.com.

  To change the current server, click the Change settings button. Here you can choose the server. Click on move down and the list of servers.

• Gas station found no (ICS) update for my AT200

  Hello

  I'm in France.
  I just received my new AT200. My first idea is to 3.2.1 update android Android 4.0.4.
  So I launched the service station, and unfortunately, this software is unable to find an update for my AT200.

  I called Technical Support French Toshiba, and the guy said that the ICS for to 200 in France is still not available. But many french people have ICS download from the Service station!

  So why I can't update my new AT200 with ICS?

  I followed the procedure available on toshiba's French web site, but whitout success...

  Any ideas are welcome.
  Thank you very much.
  See you soon.
  Robin.

  I'm from the Germany, but I think that I've already read messages from people of france claiming the 4.0 update is available. (Canada was the first, but (most of?)) The Europe that the France followed about a month later, so you shouldn't need to learn of Quebecers).

  Just a few basic questions:
  #1
  Are you sure that your wireless internet works without problems and the firewall or even the provider is not a problem?

  You could try another router (friend, family, @work (if allowed)) in order to ensure.

  #2
  No there are no updates available? For my AT200, there was first an updated intermediate 3-setting (think it was 3.2.1).) But it may have been already included on your most recent at200.

  #3
  Tablet 'comes' from France? (it is no matter)

• Silverlight continues to show an update even if I select never show this update again. Please fix this or tell me how

  Automatic updates continues to display Silverlight as optional updates. I never check see the this update again as I do for other junk, but only Silverlight continue to appear with each update.

  What is the exact number of KB of the Silverlight update you want to hide?

  It would be possible that you hide different updates of Silverlight that are appearing instead of the same again and again.  If so and you wish not to receive updates to Silverlight, period, you will have to keep hiding them until they cease to appear.

• Option tools/Windows Updates never return any update on my PC under Windows XP SP3

  Hello

  I have a question to get an update to Internet Explorer 8 tools/Windows Update option.

  My desktop with Windows XP Home PC, it crashed last week. I took it to a computer shop nearby for help. After that they have reinstalled Windows XP with SP3, I brought and installed other software, such as MS Office, Microsoft ForeFront Client Security.  However, when I tried to get the last Windows Update in the Tools menu of IE 8, it is not in the list, saying: "no priority update".  At first I thought that it would be because the computer shop had the last update as they claimed. However, after a few days without updating, I realize something was wrong because the other two XP machines home with Microsoft FrorFront Client on this subject are able to get the latest version of ForeFront security definition almost every day.  Also, it not there no update of Office, and two only in update in the list option.

  The WindowsUpdata.log, I saw some errors like below.
  WARNING: WinHttp: SendRequestUsingProxy failed for http://download.windowsupdate.com/v9/windowsupdate/a/selfupdate/WSUS3/x86/Other/wsus3setup.cab>. error 0x80072f78
  WARNING: WinHttp: SendRequestUsingProxy failed for http://download.windowsupdate.com/v9/windowsupdate/redir/muv4wuredir.cab>. error 0x80072f78
  WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072f78
  WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072f78
  WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072f78

  I googled them and tried a few suggestions without luck, such as to stop the automatic update service, rename Windows 'SofwareDistribution' folder and restart the Automatic Update Services. Could I be missing?

  Thanks in advance for your help,
  Michael

  Take it back to the shop. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite L100 112 of the bios language and core issue.

  Hi people!

  I have a satellite l100-112. (brief model number: psla3e)
  I updated my bios to the latest version, that I found on the toshiba site. v: 3.20
  Its specification states that its language is: "universal" :)
  Well, actually it is japanease. So now I have a working bios, but I'm not convinced :)
  Unfortunately, I did not save the backup image of the bios. Can you tell me where to find an English bios or an older bios?

  The other thing is:
  I use debian etch os. I wanted to compile a new kernel, but I need a more detailed specification of equipment or a configuration of kernel source to do, because I don't know the exact of the ide controller type.

  If someone can help me, please do! :)

  I thank you,
  Eddy

  Hello

  First as you probably don t know, Toshiba doesn't support the other operating systems like Microsoft Windows. This means that, also, the BIOS has been configured only for the use of Windows and not Linux.
  Secondly, as far as I know Toshiba public doesn't any BIOS details (source of the kernel configuration, etc.).

  > don t know the exact type of the IDE controller.
  The L100 doesn't support IDE controller but a SATA controller ;)

  See you soon

• Re: Satellite R630 - HDMI - the image on the TV was not whole screen

  Hi all

  I just tried to connect my Satellite R630 with my LCD TV with a HDMI cable. However, the image on the TV was not all screen, with the HDMI 1 port (my TV has 3 HDMI ports), there was still the black space of 1.5 inches.

  I was wondering if there is anything I missed? The connection with the TV was very good with a good old VGA cable. Thanks for any advice.

  Tim

  Have you tried to play with all available display settings?
  I put t know who don't Satellite R630 you exactly and what graphics card is inside, but check it please all advanced options to show the settings first.

• Satellite R630-155 - fan is too loud and SSD update

  I am the owner of a Toshiba Satellite R630-155 (Core i5-480). My problems are:

  1. the fan is too loud and never stops. In normal operation (navigation and General Office work) there is a constant high pitch noise which is audible three to four meters in a desktop - high load environment, you just can't take it anymore! The fan never stops... even when you do nothing...

  2. the heat is a big problem. The bottom of the laptop is overheated constantly and I have to place on my desk so that the lower left corner is outside the table, so it can breathe fresh air from below - otherwise, the temperature rises and the (noisy) fan is unable to follow. When I work with the laptop sitting on a couch, I place a thick book between the laptop and my legs. The book must be thick (more than one inch) with hard covers, otherwise the heat going through the book!

  3. last (but not least, I will mention the biggest problems here) that's the problem with the installation of the SSD. I bought a used Corsair F80 (80 GB SSD) from a friend, but I was unable to use it with the Toshiba - BIOS not detect the disc. I tried to install all the latest updates for portable and SSDS but I had no success. Then I put the disc and I bought a brand new Zalman 128 GB SSD (SSD0128N1 Sandforce) but I had exactly the same problem. I contacted my local support Toshiba and after much conversation, the only answer I got is that the laptop is not compatible with these SSDS, and it is acceptable by Toshiba and not their problem. They told me that if I need an SSD upgrade I cannot go for the Toshiba SSD that is installed on the portege series, which is sold by Toshiba for a ridiculously expensive price - about $500 for 128 GB. I contacted the European support center and I got the same exact answer. I searched the Internet and found someone else with exactly the same problem with a Corsair 128 GB SSD - he concluded that the laptop detects the SSD after ten to twenty resets. I tried and it was true - after a lot of restarts the detected disk Zalman laptop and I was able to successfully install Windows 7, but the process is unacceptable. Also the drive is rated by the sites official at the speed of an OCZ Vertex 2 128 GB (and a little better), but when I ran a cue point in the Toshiba, the results I got were less than half of the advertised speed. Same reference in another machine of the same disc, resulted in the announced speeds.

  Shame for Toshiba...-beautiful design and portability, but all the rest is a big flaw. Their support in non-existent and they do not appreciate their customers. According to me, they stole my money and I will never buy a Toshiba laptop again.

  Sorry for the big message, but I need, I warn potential customers. Can anyone help me with any of these problems? You also have the same problems?

  To follow...

  Hey Buddy,

  With regard to the issue of fan and the heat: you did it BIOS update? A friend told Satellite R630 too and he told me that the fan with the new BIOS version 2.10 activity is reduced. In addition, the laptop is colder than before so I recommend to install this update. You can download the update of the BIOS here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But before you start the update of the BIOS, you should consider the following tips:
  -Run update as an administrator only
  -Unzip all files from zip archive before launching the update file
  -Close all running programs as the antivirus and firewall
  -Make sure the battery is fully charged

  With regard to the SSD it s still a little complicated to install 3rd party products and no one can guarantee that these parts would not work. You're always on the side safely with original spare parts from Toshiba.

  All you can do is to install the new firmware for SSDS and hope that it works, but who knows maybe the BIOS update will help you also in this case ;)

• Satellite R630 - 11L - sometimes did not recognize the SSD drive

  Hi all

  I have a portable Satellite R630 - 11L and I just bought a Corsair F120 SSD for her, but my laptop a few times did not recognize the SSD drive and fails to start occurs. I searched on the Internet concerning the issue, but there are any topic related to my problem. in recent days, I have updated my bios but the problem remains. for example if I put the computer to sleep and he never wake ups as it should be. the blue windows screen 7 failure comes and an error message 'could not access the windows volume. If portable succesful started without problem occurs until I reeboot the computer. so most of the time I have to restart computer about 5 - 6 times to work normal. At the same time, I opened a topic on the corsair website. They told me to test my drive on another computer, so I test it on laptops, dell and hp to my friends, but there is no any problem don't like this.

  So I test my ssd on an another toshiba laptop R630 which has a different hardware configurations, the problem remains that laptop too...

  So I think toshiba may provide a bios update to fix this problem. This laptop really great, so I don't want to buy another.

  y at - it advice to solve this problem?

  concerning

  Hi machka,.

  > I think that here is the toshiba support forum. is not here?
  Here he s a Toshiba forum, that of right, but you can only chat with normal users like you and me. You will not find someone from Toshiba here.
  The forum is provided Toshiba but for Toshiba users to exchange experience on different products.

  So I think that the Quad is just. No one can say that every SSD is compatible with all computers. You need to understand this!
  There are hundreds of different players and computers on the market and I m sure that no one can test a new computer with all SSD on the market. This is not possible, because it takes a lot of time and more expensive laptops that I think.

  So if the SSD doesn't work, there is nothing that you can wait for the BIOS update.
  Otherwise, you must purchase another SSD. Alternatively, you can ask a service provider allowed in your country, maybe that technicians have already experience with some SSD in Satellite R630. Just ask for that, they are the first contact for you! :)

• Satellite R630 - HDMI does not work

  I tried to connect my Satellite R630 X HDMI with my Sharp LC-32XL8E of Full HD 1080 p TV.

  The tv will recognize the connection but indicates an 'incompatible signal' and remains black.
  The Satellite rotates the screen in black and will only be if I disconnect the HDMI cable.

  If I connect via RGB too, the Satellite will operate in RGB and (!) HDMI mode, but with the native resolution of 1366 x 768.
  Try to use the RGB Mode and changing the resolution 1920 x 1080, any resolution above 1400 will not appear.

  I think that the Sharp and the Satellite will not be correct on the possible resolutions.
  Two other laptops (old!), I tried with the same tv works well: I connect the tv and the tv will show the desktop in the right way.

  What can I do? I can't access all the options while the laptop is connected by HDMI, because both screens will only show black screens. When I disconnect, the satellite will give not any possibility to set a monitor, which is not actually connected.

  Hi Verwaiser,

  How do you spend the TV? You can test the FN + F5 key for this combination. Then, you can switch between all monitors (internal and external).

  In addition I would test another cable in your case.

  Also try to update the display driver. You can download the latest version of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Satellite U400 - 112 (PSU40E) - Safe BIOS upgrade - SOLUTION

  Dear all,

  Trying since long upgrade for the bios of my laptop favorite... Toshiba Satellite U400-112 (PSU40E)
  I have Windows 7 Ultimate (64-bit) English and BIOS version 4.00(until yesterday).
  The problem was that, in windows 7 (32 & 64 bit), the tool flash never started the process of update due to several incompatibilities.
  There is a solution (in fact a workaround solution) to be honest and works 100%!

  My solution is:

  (A) download the latest bios upgrade version appropriate for your laptop, save it (tomake it is easier in the root of the C:\ drive) and unpack it in a temporary folder (for example: bios).

  (B) use the Hiren's Boot CD a real support from a USB or CD (download and burn a CD or follow the process of CD copy on a USB key).

  (C) boot the laptop from the CD or USB flash and in Hiren's Boot Menu, select the version of mini Windows XP.

  (D) allow completely Windows XP startup and then run the tool to update the bios flash from the temporary folder. The update procedure make it exactly as it is described in the manual of the bios update. (If you are not experienced)

  (E) it will update the bios, and then he stops himself. Then you can start normally your operating system, remove any CD or USB key mounted on it.

  I hope you find it helpful and convenient.

  Best regards

  Ioannis

  To be honest I updated the BIOS on my U400 (running Win 7 32 bit), A210 (Vista) and Tecra A10 (Win 7 64 bit) using the victory as the BIOS version and never had any problems in running the tool
  Anyway thanks for sharing your knowledge with the community

• Wireless will not work in the Satellite R630 - 13U Code: PT31LE-00V006

  Hi all

  I bought a new Satellite R630 - 13U Code: PT31LE-00V006CE two weeks ago. Problem is that I am not able to connect to any wireless network (or open or encrypted with WPA or WEP).

  In my laptop I got it with Windows 7 installed. I am able to see the icon for wireless next to the clock in the bottom right of the screen, as I am able of netwoks that detects the pc and see select it in the list. Then once I have selected the network he asks me the password, and if I have entered a wrong password, I get the error of law.

  Problem comes when I introduce the correct password... then after a few minutes where I can see the screen of "process"bar that I get an error message that just said ' not being able to connect to the "network name"

  As I said I tried with several open networks or security, with two levels of security (WPA or WEP). I tried with different networks, with different routers and in different places... but never had a laptop computer with this new wifi connection.

  I tried to uninstall the Broadcom card and reinstalling by downloading the driver from the official site of toshiba, also I've installed the latest version of the "value package"... but still does not work.

  I have other friends with HP, o DELL who use Windows 7, which are able to connect to networks that I'm not, and no problem...

  What else should I try to fix this problem?

  Thank you very much

  > Can only connect to my home network if I disable all security.

  This means that your router supports different encryption settings as the WLan card.
  I would recommend using encryption that is supported by the router and WiFi card so

  By the way; update you the driver WLan to the current state?
  What to DO: Here you can find the latest version:
  http://APS2.toshiba-tro.de/WLAN/

  What about BIOS: check if the BIOS is up to date also

• Satellite R630-141 - connect wireless 5 GHz and channel 44

  I just bought a new Netgear N600 Wireless Dual Band Gigabit Router model WDR3700. In theory I can connect either 2.4 GHz or 5 GHz normal connection.

  I can connect correctly at 2.4 Ghz, but my Satellite can't seem to see the show of 5 Ghz. I put all settings security WPA2 AES, and as far as I know the Satellite R630-141 support Wireless-N to 5 GHz on this channel.

  Any ideas?

  Thank you

  Hey Buddy,

  According to the specifications of the laptop, your laptop has Broadcom BCM94313 WLAN card. With the help of Google to find the specification of this WLAN card I see this card supports the connection 2.4 GHZ only, not 5 GHz.
  So why the laptop doesn't see the connection.

  But why you need 5 GHz? N project works with 2.4 GHz too :)

• Satellite A50 112: registration problems

  I have a type of satellite SA50-112. When I chose to save my laptop with toshiba this type does not appear in the list. Any ideas?

  Hello

  After a few problems with the registration, I got some info from a Service partner.

  There are toshiba serveral registration Web pages. You have to find of the Toshiba site specific to the country, where your laptop has been purchased. On this site you may register your laptop.

  Another tip: If you take a look at the warranty booklet (it has been delivered by your laptop) there is a full explanation on registration!

  It should help you!

  Bye Bob