Satellite S70 - Pioneer BD - RW is not recognized

Similar Questions

• Satellite A200 PSAF6A - HARD drive is not recognized. No recovery of product

  The drive HARD in my Toshiba Satellite A200 PSAF6A-0US01N is not recognized in the machine or any other computer, so I can't run any windows/toshiba repair.

  I know that readers have a factory reset hidden on the disc and press 0 to the power upward, but with the unreadable disk, how can I repair my installation of Windows Vista?

  Hello

  If the HARD drive is not recognized by the BIOS or other laptops, then I would say that your HARD drive is defective.
  In this case, you need to replace the HARD drive.
  In this case, you will not be able to start the recovery procedure from the HARD drive because it works badly as he has already said

  Are you from the Australia? If you need a recovery disk, I recommend contacting the local Toshiba ASP to get this drive

• Satellite S70 - A - 11 H does not

  Laptop won't turn on when you press the power button, power button lights up and the backlit keys, but the screen remains black.

  The model is a Toshiba Satellite S70 - A - 11 H

  Hello

  It is not easy to say what may be the problem. Unplug the power plug, remove the battery and press the power button for 10 seconds. Leave the machine for a while and try to start with power current only.

  What happens when you do this?

• DVD - RW for Satellite 2800-500: IDE1 error, disk not recognized

  Installation of a slim drive DVD - RW NEC ND6500 caused a message "Error IDE1" at startup and the drive was not recognized.
  The DVD-RW Toshiba SD - R6472 drive is not compatible with my Satellite 2800-500?
  Does anyone know a way to make someone of them work?

  [Edited by: admin on 22 July 05 17:57]

  Hello

  The problem is that all CD/DVD drives cannot work spirit all models of laptops. The problem is that there is no way to change to master or slave. AFAIK there is no public document that shows the discs and laptop computer compatibility.

  The best solution is to check if the drive is CSEL. In this case, it should work properly. If you can check please if you can find the CSEL notation on the label located on the upper side of driver s.

  Good bye

• Satellite P300 PSPC4E - new battery is not recognized by the operating system

  Hello

  I bought a new battery and it is not recognized by the system
  Satellite p300-PSPC4 win7

  drivers ok
  OK magazine

  The battery is always fully recognized and fully supported. I tried several methods to try to load but nothing happens

  the battery icon is present

  Thank you

  Hello

  Because your old battery is always recognized, I think you bought the battery is not compatible.

  That's why you should buy a compatible battery recommended by Toshiba.
  I think you can buy this Toshiba ASP.

  Welcome them

• Satellite L500 - second module of memory not recognized

  Have installed 2 GB Offtek extra memory in 2nd slot of memory, but it is not recognized by the system--still show only 2 GB installed memory.

  What is the problem?

  Hey,.

  I've never heard of RAM modules Offtek

  From my own experience, I can say that work really well Kingston memory module and never had a problem with them, they are of high quality modules.

  In my opinion, you should try a different RAM module. Maybe it s is not compatible, so it will not be recognized that s my personal opinion.

• Satellite L550D R815 - engraver of DVD not recognized in external programs

  I have a problem, my dvd burner is not recognized by external programs such as Ace CD Burner or CdBurnerXP. I can burn DVDs and CDs in windows, but I want the added functionality of these external programs.

  I searched on the site of toshiba for updated drivers, but there are none, and Googling TSSTCORP CDDVDW Ts - l633P Ata Device (this is what is listed under my CD-ROM in Device Manager) gives no useful result.

  If it's any help the device type is listed as: Dvd/Cd Rom and manufacturer readers is (Standard CD-ROM drives)

  All do you know of any other driver that I can use to make accessible to other programs? You can provide any help would be greatly appreciated.

  Thank you

  Bob Fischl

  Edit: I found the program included Toshiba dvd burner and it recognizes.

  > I found the program included Toshiba dvd burner and it recognizes.
  Thanks for the comments!

• Satellite Pro 6050: DVD player is not recognized correctly

  The guide shows the Toshiba SD-R2102 as one of the internal drives for machine of HRT (supplied with the CD-ROM). So I bought one. Running XP and when I install the hardware is not recognized at boot, or in Device Manager. Looked at the site to support my BIOS is the last and can find no driver there or on my tools disk.

  Can someone point me in the right direction?

  Hello

  As far as I know your device has a Slim select Bay. If the drive is not in a good position and there is no proper contact of the reader doesn t exist for the system. Please check if the disc is in the correct position. If you put it inside at the end to do a click. After that, the reader is correctly positioned.

  Good bye

• Satellite Pro 2100: card network wireless not recognized after upgrade

  I have a Satellite Pro 2100 ad I used successfully a PCIMCIA 802. 11b card wifi for two years.

  Studying the manual, I discovered that the notebook is "wifi ready" (it has a wifi switch, a switch wifi of Alt - F8, and a section of the manual).

  I opened a Bay and found out a mini-pci slot. That's why I bought an Intel 2200 BG wireless adapter and I put it inside, which connects the sons of two antennas, located in the Bay. Finally, I was ready to son mask 11 and 13, as suggested in many forums. But when I put the card inside, unknown electrically. It seems that the mini-pci slot must be Electric.toutes impossible. My Bios is not impossible, but it.

  In another Bay close to the mini-pci card, I discovered an empty shell for a chip. Is this an impossible chip?

  Hello

  As far as I know that this unit is about 4 years old and at that time the unit is tested with the wireless network card with the PA3212U-1MPC part number. This map has been tested, is also compatible and can be used.

  I put t know what is going on exactly in your case, but new material should be recognized and the driver must be installed. I put t know what you mean exactly, but can you please explain exactly the situation?

  The card is correctly recognized and installed in the Device Manager?
  You can use FN + F8 key combination to activate the wireless card?

• Satellite 5005-S504 - peripheral USB are not recognized

  Hello

  with my laptop older, one Satellite 5005-S504, I recently problems with the USB ports. None of the three ports detects a USB device. Device Manager does not indicate a problem on the host controller or root hub.

  I am running Windows XP, SP3 and there was no recent updates to be identified as the cause of this dysfunction.

  Suspicion over there?
  Is there a driver available that could help?

  Thanks in advance!

  TH

  Hello

  The USB ports are listed in the Device Manager or not?
  If so, I'll try to remove them and restart the laptop. After that the ports will automatically install again.

  If it doesn't work, you can try updating the chipset driver. Take a look on the Web from Toshiba site to download.

• Satellite A660 - 11 M - USB devices not recognized

  Hello
  I recently bought a new Satellite A660 - 11 M, and none of the USB ports seem to work. Ive tried plugging in all: 3 different mice, USB keys, ipod but nothing seems to register. It does not even say that the device does not work, when I plug it, nothing happens
  Thank you

  Hello

  Pretty easy to solve if it is Os/driver related issue. Reinstall/Update utility chipset of the [Page Driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] or go to Device Manager, click on, controllers bus USB, to uninstall, then restart the laptop then

• Satellite M30-841 - large hard drive not recognized

  HY guys,.

  First of all, I want to say hello, because this is my first post in this forum. Merry Christmas as well!

  I am writing because I bought a 160 GB 2hard disk to replace my old 60 GB. When I troed to install it, I saw that it recognizes just 128 GB which, according to my research, is due to the LBA 48 bit not supported on my laptop (Satellite M30-841).

  I tried to everythingmentioned:
  -J' have flash Bios o update the 1.70 (last available driver toshiba Web site)
  -J' changed the downloaded XP SP3 and I changed the registry to install a key DWORD EnableBigLba.

  However, she still recognizes only 128 GB. I'm losing hope to install the new hard drive. Anyone of you has a suggestion that I should try?

  I realized that I should update the driver of my motherboard, but I don't know where they are, if there is (I don't even know the name of it, despite the use of everest - which shows DMI.

  Am I missing something?

  Thank you very much

  Icemaster

  Look, man.
  The HARD disk controller seems to support the 28-bit LBA.
  The disk controllers HARD supporting the 28-bit LBA address max 128 GB HDD.
  Controllers HDD support 48-bit LBA address bigger hard drives.
  But this is a physical limitation and you will not resolve this update anything.

  In your case, there is nothing to see

• Satellite L655 - 121 (PSK1JE) - key USB not recognized

  Hello
  I have a problem with the boot on my laptop. I've created a live USB with ubuntu and start the laptop computer does not see the USB. I updated the BIOS to 1.80
  I enabled legacy usb.

  The USB stick on another computer works properly...

  Hi linkin.

  The USB has been recognized for laptop? I mean if you go to the start menu in the BIOS (F12), you see the USB next ODD, HARD drive etc. ?

  If this isn't the case, USB stick isn't recognized and you should test another.

• Satellite L735 - wireless network card is not recognized after installing OS own

  Dear Sir.

  I have the computer laptop satellite L735-M14X part #: PSK0CE-04X01RAR, SERIAL No.: YB321818W
  My laptop was windows Home premium 64-bit Arabic and very slow and I wanted ultimate English so I did a format and installed win 7 ultimate 64-bit, and after I installed all the drivers shown in the attached picture 4

  but wifi still doesn't work do not for a wireless internet connection! (I updated the bios from 1.8 to 2.2 and installed the package of value added and activated the wireless but not active)

  so I noticed that there are 2 drivers to lack as in the attached photo 1 & 3 picture and I have not found the required software for them.

  also when I was installing the driver 'widipl-20110323155916', is a problem then please check the image2

  Please find a good solution without recovery!

  Waiting for your help earlier and support

  Photo 1
  [http://forums.toshiba.com/tshb/attachments/tshb/brd_network/14337/1/1.png]

  Photo 2
  http://forums.Toshiba.com/tshb/attachments/tshb/brd_network/14337/2/2.PNG

  Photo 3
  http://forums.Toshiba.com/tshb/attachments/tshb/brd_network/14337/3/3.PNG

  Photo 4
  http://forums.Toshiba.com/tshb/attachments/tshb/brd_network/14337/4/4.PNG

  According to the specifications of the laptop your laptop doesn't have Intel WLAN card. It has Atheros WLAN card inside, please try to install the driver gate Atheros WLAN Toshiba - http://aps2.toshiba-tro.de/wlan/

  Please post comments.

• Satellite L755 - Flash USB memory is not recognized correctly

  Hi gentlemen

  I (ScanDsik 32 GB flash memory) she used to work properly, but last week it was late to work when I connect it to the laptop Toshiba Satellite L755 and now when I connect it I can't open it I see in Device Manager, but can not open and not properly recognize the flash memory is established in another laptop and computers only in my laptop now does not.

  I ve format into another one of these computers is Toshiba laptop too, I reinstall usb driver, but same, please could you help me?

  Have you tested the feature with others, like USB keys?
  Are you using the original OS that you got with your laptop?