Satellite L655 - 121 (PSK1JE) - key USB not recognized

Similar Questions

• Satellite L655-121 PSK1JE integrates a video chip on i5 CPU does not work

  Hello

  I have a question,
  Why the video integrated into the i5 450 m CPU does not only works the hd5650...?

  Why the site does not mention this model of toshiba laptop?

  My laptop is satellite L655-121 PSK1JE

  What do you mean by it does not work?
  How t should work? What did you expect?

  Support for computer laptop Intel Core i5 - 450 M processor
  The laptop was equipped with additional graphics ATI Mobility Radeon HD 5650.
  It's the main GPU and I don t understand how you want to use both GPU's?  :|

  > Why the site does not mention this model of toshiba laptop?
  How about that:
  http://IL.computers.Toshiba-Europe.com/innovation/en/series/satellite-L655-series/1088633/

• Satellite A500 - 14K - key USB not recognized with Windows 7

  I have a Toshiba Satellite A500 14 K, it was pre-installed for Windows 7.
  I bought the upgrade to Windows 7: I got a PC upgrade disk and a windows upgrade disk. I launched the first disk, then the other.
  There was no particular error in these facilities.

  Since this upgrade, my PC doesn't recognize USB keys while they work perfectly with the previous version of windows with this pc. They are normally key usb plug-and-play. When I launched the update of windows, the driver exists, but installation failed in error with a message of access problem.
  I check that the firewall does not block access. I installed the latest version of the BIOS

  I can't find any similar pb on the forum
  Thank you for your help

  Hello

  Have you tried to update (restore) chipset utility?

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• OfficeJet 6600-key USB not recognized

  Hi Experts,

  My OfficeJet 6600 printer does not connect to my Dell E6430 laptop running windows 7.  I need help.  See my last post to see what I already tried, which includes everything I know how to do it and also some stuff that an employee here Hp told me to do.  None of that so far has worked, and it would be great help.  Again, I must keep my priter connected via usb, or maybe I could use direct printing if someone tells me how to.

  Thank you

  Hello

  Given the detailed description of the troubleshooting steps below. Click on the link windows 7 and follow the steps.

  http://support.HP.com/us-en/document/c02266743

  Good impression

• Connection network satellite L655-121 always shows 'disconnected '.

  Model: Toshiba Satellite L655-121
  OS: Windows 7 Home Premium
  NETWORK card: Atheros 8152 - 1.0.0.36 driver version (also tried 1.0.0.26)

  connection network always shows 'disconnected '.

  I tried the following:
  -straight cable connection from the laptop to the router - no link
  -crossover PC-to-phone cable connection = no connection
  -used work cable from the printer to the router and the laptop to router - no link
  -changed (tested) cable and router port - no link

  also a linux distribution installed with shows the installed NIC but his are not all RX or TX packets
  diagnosis with toshiba used cable connected - message was "cable can be damaged or not connected.

  all other tests I should try/run before going to the Service Center Toshiba for repairs, and how long they can hold my laptop for repairs - the whole motherboard must be replaced?

  Are you using 64 bit OS originally that you got with your laptop?
  Have you noticed this problem from the beginning?

  Card LAN listed and activated correctly in Device Manager?

  When you connect the LAN cable is green LED on?

• USB not recognized on Windows 7

  Hello
  I have a problem. I instaled Windows 7 USB and mouse does not (USB not recognized-pop up on my desk).
  PLS, can you help me to solve this problem?

  Hello

  What model of laptop do you have?
  On the European driver Toshiba Satellite A350 series page I could find the registry patches. I think you should install it!

  In addition you should check the support page of USB devices maybe your Win 7 peripheral USB needs drivers

• How to install Recovery on my Satellite L655-121 image?

  I have labtop to a Toshiba SATELLITE L655-121,

  I did a restore to get rid of the problems that I have encountered in Windows 8 beta, but the recovery has not filled :(

  Now I can't fix or redo the recovery! I had him!

  I can't use HARD drive recovery that was present on "pilot! and I don't have the CD on which the copy is present, I have just the serial number :D

  Widows is "7 Home Premium OA.

  The laptop is useless now, what should I do? If I downloaded this Microsoft Windows and used the S.N I, if it works correctly?

  >... but the recovery did not complete
  How to understand this?
  > if I downloaded this Microsoft Windows and used the S.N I, if it works correctly?
  N ° serial number has nothing to do with the recovery image.

  If you want to have the original Toshiba installed on your laptop recovery image you must order the Toshiba recovery disc - https://backupmedia.toshiba.eu/landing.aspx

  Another option is to install the clean version of the OS and later install all necessary drivers, tools and utilities more. Each of them you can find and download from Toshiba support page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

• When I type in a url, the Enter key is not recognized, so the site does not load

  When I type a url or paste in one and press ENTER, the Enter key is not recognized and nothing happens. It does not load. If I use a bookmark and click on a saved url that will load automatically.
  Have uninstalled and reinstalled firefox and it has not solved the problem.

  The problem may be caused by the Ask.com toolbar (Tools > Modules > Extensions)

  The details of your system display this toolbar to the user as AskTbARS/3.11.3.15590 agent

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• For the Satellite C660-A219 function keys do not appear

  For the Satellite C660-A219 function keys do not appear... I formatted my laptop and installed a new Win 7 after that I lost... function keys. Please help

  Have you installed version of Win7 or recovery image original Toshiba that you got with your Toshi?
  Did you install additional package from Toshiba?

• Satellite L500-128 - FN keys do not work with Win 7 64 bit

  Satellite L500-128 - FN keys do not work with the help of the operating system Windows 7 x 64

  Hello

  Satellite L500-128 belongs to the series of PSLJ3E.
  The European driver Toshiba page contains all drivers for this unit.

  Next to the installation of value-added package, you will need to install the Flash Cards Support utility v 1.63.0.4.
  Buttons controls the FN Flash Cards!

• HP LaserJet P1102: USB not recognized during installation of HP LaserJet P1102

  I have a Sony Vaio VPCEH computer laptop with Windows 7 and when I run the disk I got with the printer on my laptop, that the installation procedure works in what concerns the section "Install printer Software". When you are prompted to turn on the printer and connect the cable USB to the laptop it says 'USB not recognized '.  I tried all 4 slots USB into my laptop but the USB still appears as an unknown device with an exclamation point in a yellow triangle. I searched internet solutions and tried to uninstall the unknown device in Device Manager and restart the installation with the disc, I also tried clicking on the unknown device driver software update but it says the software driver is up to date and still, it shows as an unknown device and is not recognized. I also tried to uninstall the HP software from the disc on my laptop and that reinstall but nothing has worked. I felt for over 2 weeks now and have not been able to use it because of this problem and I really need for University, so I would be very happy if someone could please give me a solution to this problem

  Hi @Janemaguire,

  Have you tried another USB cable?

  Because the printer is not detected on the Mac, it may be the USB port of the printer.

  What happened when you tried to install the printer on Mac?

  Error messages?

  What is the model Laserjet P1102w?

  Let me know. Thank you.

• "Usb not recognized" keeps blinking and endangered

  Hello, the notebook of a colleague, she has the message "USB not recognized" that appears for a few seconds, then disappear. Sometimes it will come back repeatedly, sometimes he disappears for long periods of time. When I was reviewing its system, is come/gone several times, disappeared for a few minutes, then flashed again once again.

  She uses a laptop HP ProBook 4310 S. It uses two USB ports. One for its wireless mouse and the other to a Kensington Displaylink (allows for laptop > Displaylink > external monitor via the USB port), who worked without interruption throughout my check.

  Any thoughts?

  Hi phill.

  I suggest an update of the s chipset driver:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3974410&prodTypeId=321957&prodSeriesId=3974409&swLang=13&TaskID=135&swEnvOID=1093

  You should check to make sure that it is your laptop model.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).

• Device USB not recognized (malfunction)

  I went on my external hard drive and an error message came - USB not recognized - device due to a malfunction. I tried switching off all voltage and turn support but still the same voltage. Then I went to print something and the same message came. However, I used my printer today without any problem. I don't know what happened. Advice please? Thank you very much. Aide-de-camp

  Hello ~ thanks for the reply.

  Just to say that I read somewhere switch all switch off and leave it for half an hour - then turn on everthing. Miraculously - it worked!

• FAT corrupted USB not recognized

  I have problems with my rocket GB 8. This morning, while trying to fix my flash drive I accidently deleted the partition off my rocket. Of course, now I'm reeciving 'Fat corrupted' error on my fuse and USB will not recognize. I've searched high and low. I tried to power it in 20 seconds, put the "rocket" on hold, then press on the< rewind="" button="" (and="" center="" buton)="" while="" connecting="" the="" usb="" and="" i="" still="" receive="" the="" usb="" not="" recognized="" in="" windows="" (xp,="" vista="" &="" 7).="" i="" even="" tried="" using="" my="" wife's="" laptop="" with="" vista="" with="" the="" same="" usb="">

  Please tell me I didn't have the toast when I messed up the partition! Help!

  Finally, after the persistence, I got the computer to recognize the "rocket". Managed to format to FAT32 via Windows without any problem, then via the "rocket". All is well now.