Satellite (Satego) P100 - Bug in the Bios - 3D - games is not possible!

Similar Questions

• Satellite L450D PSLY5E freeze during the BIOS update - now does not turn on

  Hi guys,.

  I have a Satellite L450D. I recently tried (unfortunately) update the BIOS after a clean installation, because the FN key no longer working to bring up the toolbar.

  Winphlash program froze near the end and the system remained frozen for a good half-hour. The only way out was to remove the battery (as I know in any case).

  Now, the system will light with battery in or out and plugged in. I guess I've damaged the hard drive or the card mother or something.

  Is it possible to fix? Or is it?

  Thank you very much for your help.

  BTW - I know now not to update the BIOS unless it is ABSOLUTELY necessary and well advised.

  Joey

  > I guess I've damaged the hard drive or the card mother or something.

  The disk HARD isn t damage but the Rom module where the BIOS is stored was not flashed properly.
  I guess that this happened because the flash procedure was interrupted.

  I'm not sure if this can be fixed perhaps the service guy could flash the ROM module with special disc of crisis of the BIOS.

  I keep fingers crossed

• Satellite U200 163: a bug in the bios with linux

  on my u200 163 (with the new bios 1.3 works well on XP), linux (2.6.17) as Mandrvia 2007 or Ubuntu Edgy new distributions does not start ok. After grub starts, two lines talking about the bios bug and memory address not E820 reserved and not using MMC...?
  Y at - it a bug in the bios? Can I change something in my bios?
  These linux distributions work very well on other PC...

  Thank you!

  Hi ft

  Unfortunately I have no explanation for what is happening exactly to your device, but don t forget that your device is not supported under Linux and also designed for Windows XP.

  Satellite U200 is more recent and it is possible that in a month next someone will do some Linux experience on this unit and reported it here.

  Good bye

• Re: Satellite A300-243 - updated after the BIOS, it did not work

  Dear members...

  Good day...

  I have a problem with Toshiba Satellite A300-243, I installed the Bios after you download from Toshiba Web site, and when it's over, he restarted the machine and did not work, just turned on.

  So if any body can help me to solve this problem, I'm happy.

  Thank you...

  Hello

  It looks like that the BIOS update has no...

  What can you do now?
  Yourself you can do nothing. The only change is the authorized service provider. Technicians can try to reflash the ROM module

  Sorry mate, but in this case you need professional help.

• Satellite M - How to remove the BIOS password?

  Hello.

  I forgot my BIOS password. I tried to do everything to introduce some default passwords like "toshiba" "phoenix" pressing the left SHIFT key while booting to disassemble my laptop and find my BIOS battery to remove it.

  The problem is that my battery is stuck on my motherboard and I don't know what to do. I heard that there should be a few riders near the battery that could help me but I cannont find them.

  I'm desperate... What can I do?
  Please help me
  Thank you.

  Default password doesn't exist and there is no magic default password that can remove existing. Remove the BIOS battery will not help at all. It will not work on laptops, then forget.

  BIOS password can be removed in ASP only if the closest contact with ASP and they will help you.
  Theory with rider is also not correct because the BIOS removal procedure is not the same for each laptop model.

  Sorry, but ASP is your only way to remove the BIOS password.

• Satellite A30 crashes when starting the Bios when you insert a USB

  My A30-104 laptop hangs when starting the bios, whenever I insert a USB key into the USB port.
  The only message that appears at the bottom of the screen and the message is something like this:
  Press F12 for the boot configuration or F12 for...

  Pressing F2 or F12 does not change the start state.
  Note that Microsoft XP Home SP2 is installed on the machine.
  No idea why startup is suspended?

  Thank you
  Sam

  Maybe the laptop tries to start the USB, but it is not possible to
  It's just a suggestion, but I remember that something similar happened to a friend of mine.
  The printer is connected to the USB and the laptop could not start in the OS.

  Well, maybe we can solve this problem on the laptop you by changing the boot order in the BIOS.
  Please enter the BIOS and change the order on the disk HARD - CD - etc.
  Make sure that the HARD drive was chosen first

• My HARD drive is detected by the BIOS, but it does not start

  I have a laptop, OS is Window7, the HARD drive is detected by the BIOS, but it does not start, I formatted and the procedure going well until the reboot, it starts not to finish formatting.
  Please, I need help!
  Thanks in advance

  Hello

  Sounds like the hard drive has failed, or other hardware issues affecting the reader by the mother-
  Board or wiring.

  Check with Lenovo support, online documentation and diagnostics and ask questions about known issues in their
  forums.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  ---------------------

  The manufacturer Diagnostic utilities - use them to check the disk.

  (The old 302602 links isn't now valid for Diagnostics links).

  Manufacturer diagnostic utilities - run one to your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.html

  Corrected list dated 06/09/2010

  Fujitsu hard drives: utility of diagnosis here
  http://www.Fujitsu.com/EMEA/products/HDD/

  Hitachi hard drives: utility of diagnosis here
  http://www.HitachiGST.com/support/downloads/

  IBM hard drives: use Hitachi utility *.

  Toshiba hard drives: use Hitachi or Maxtor utilities

  Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
  http://www.Seagate.com/www/en-us/support/

  Quantum hard drives: use the Maxtor utilities

  Seagate hard drives: here Diagnostic utilities
  http://www.Seagate.com/www/en-us/support/downloads

  Conner hard drives: use the Seagate utilities

  Hard drives Samsung: utility of diagnosis here
  http://www.Samsung.com/global/business/HDD/

  Hard drives Western Digital: utility of diagnosis here
  http://support.wdc.com/product/download.asp?lang=en

  Trial versions of one of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Unable to find the system volume, reconfiguration is not possible

  Hi all

  When I use autonomous Vcentrer of conversion to convert windows 7 PC, I get the following error.

  ""Cannot find the system volume, reconfiguration is not possible".

  I use Windows 7 64-bit PC with PGP encryption.

  
  

  Please help me to solve this error.

  
  

  
  

  See you soon

  Kumar R
  

  No, do not all repair with VSS, because his race for your C: drive

  Now the main question: your firmware from the computer's BIOS or EFI (or EFI running in emulation of the BIOS)?

  Why I ask: when converter trying to reconfig machine (data is already copied) we found information BCD in place where it is stored to * EFI * machines, seems that it is false BCD and the converter cannot remedy this situation...

  As a workaround, you can locate on your source disk folder named EFI (C:\EFI) and rename or delete. (if somehow that this is related with PGP the best choice is to rename the folder).

  Then repeat the conversion.

  HTH

• The Godfather 2 game does not work in windows 8, it is not even start. can anyone help? pls?

  pls... can someone help me to play the Godfather 2 in windows 8? Thanks in advanse.

  Hi Hugh,.

  Thank you for joining Microsoft Community!

  According to the description, it seems that the Godfather 2 game does not work in Windows 8.

  We have no information about the game in the Compatibility Center.

  I'll have to install the game in the Compatibility Center and check out:

  Visit this link to learn more about the compatibility.

  What is program compatibility?

  http://Windows.Microsoft.com/en-us/Windows-8/what-program-compatibility

  Right click on the Setup file and install the game in compatibility mode. Visit this link for steps to install the game in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Using the windows-related issues feel free to post on Microsoft Community.

• Failed: Could not find the system volume, reconfiguration is not possible

  Hi all

  When converting to a Server 2003 server to server ESXi 6.0.0 I received this message after all 96%.

  (FAILED: could not find the system volume, reconfiguration is not possible. ) )

  I use VMware vCenter Converter Standalone 6.1.1

  Anyone encountered this problem and found a solution?

  The log file is attached.

  Thank you very much!

  Terence

  Your problem is:

  2016 05-18 T 11: 09:48.300 + 08:00 WARNING vmware-converter-agent [02332] [sub Originator@6876 = Default] ERROR: [Mntapi_GetFirstBootDisk] more than * a * found active volume. Current active drive #0, another active drive #1

  Go to diskmgmt.msc and diskpart.exe and delete active indicator second disk/partition 1

  Also, keep in mind that mount point C:\backup\Ext\ is not copied.

  HTH

• Help, please - could not find the system volume, reconfiguration is not possible.

  I'm trying to P2V a Windows 7 64-bit HP8460p I followed different advice. running as admin, turn off UAC, decrypted the drive hard, etc., and I still get the "cannot find the system volume, reconfiguration is not possible" error.

  I don't know I'm missing something stupid. I have attached the newspapers; any help would be greatly appreciated.

  I had to delete the partition 'System reserved' to make it work.

• When you export files, I get the error message: "Export is not possible..." »

  When you export files, I get the error message: "Export is not possible, an internal error has occurred: error Win32 API 2.» The system cannot find the specified file... The photo is indeed exported correctly, the error message is always and must be confirmed by "OK". The old version of LR had the problem, not only again 5.7.1 (5.5 there)

  In the "Post processing" section at bottom of the export dialog box, change the selection labeled "after export" of blank (no chosen selection) in the selection of actual 'doing nothing '.

  See this thread for more details: error after you have completed the export of JPEG

  Mike

• Vista - FAILED: could not find the system volume, reconfiguration is not possible.

  Hi, someone would be able to look at these newspapers please and advise, new to VM and trying to convert my old Vista PC before migrating fully to Windows 7, but its failure to 96% with "FAILED: could not find the system volume, reconfiguration is not possible." error.

  Thanks in advance, Dave

  Make sure your username is Administrator and UAC disabled on your Vista machine. HTH

• Message received when openning the Adobe Premiere elements 12 'not possible to initialize the services online' what should I do?

  Hello

  How can I solve this problem?

  Message received when openning the Adobe Premiere elements 12 'not possible to initialize the services online' what should I do?

  Thanks in advence

  FL

  FLOureiro

  What operating system is running your 12 items first? Have you updated to 12 to 12.1 update using Help Menu/implementation of an open project? If this isn't the case, please do.

  For your immediate problem, did you update Online Services in the preferences?

  Where are you in the program when you get the message "failed to initialize the services online.

  You are in a country outside of the USA?

  There are some online services that are simply not available outside the United States.

  Please check and review and then, based on your details, we will consider what then.

  Thank you.

  RTA

• (95%) FAILED: Could not find the system volume, reconfiguration is not possible.

  Hello

  I'm trying to virtualize a physical machine to my VMware infrastructure. I success to another machine, but this time it crashes.

  Here are the features:

  Software: Client VMware Converter standalone 4.0.1

  Machine: Microsoft Windows Server 2003 Enterprise with Exchange 2003 SP1

  Disks: 2 * 80 GB drives used in RAID 1 software mirror (2 partitions C: & D: cross the two discs)

  VMware farm: ESXi 4.1

  Configuration of the converter: http://image.bayimg.com/faackaadc.jpg

  I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95 per cent at the stage of reconfiguration (he create only a single vmdk).

  My research, it is likely due to software mirror, implying to dynamic disks.

  But I must not modify the physical machine, I have to migrate the computer because it is unchanged.

  A machine appears in vCenter. When I started it, it does not start. With QParted, I activated the flag of "boot". Now the machine starts, but I immediately get a blue screen even in safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

  I've added the vmdk to another machine, and run diskmgmt.msc to convert dynamic disk to basic disk, but he saw disc base already.

  Initial configuration of the drives here: http://image.bayimg.com/eaacoaadc.jpg

  Attached files: boot.ini and newspapers

  What can I do to convert my machine?

  Thank you and sorry for my English

  =====================================================================================================

  Hello

  I try to virtualize a physical machine to my VMware infrastructure. I successful already have to pay another machine, but it it crashes.

  Here are the features:

  Software: Client VMware converter standalone 4.0.1

  Machine: Microsoft Windows Server 2003 Enterprise SP1 with Exchange 2003

  Disks: 2 80 GB drives used software mirror RAID 1 (2 partitions C: and D: cross on two discs)

  VMware farm: ESXi 4.1

  Conversion of configuration: http://image.bayimg.com/faackaadc.jpg

  I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95%, stage of Reconfiguration (it has created only a single vmdk).

  According to my research, it is probably due to the software mirror, which created from dynamic disks.

  Alternatively, in I am not touching the physical machine, I have to migrate the machine what without changing.

  A machine appears well in vCenter, when I start, it does not start. With QParted I activated the 'boot' flag The machine boot now, but I get a blue screen immediately, same en safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

  I added the vmdk on another machine, with diskmgmt.msc I wanted to convert the dynamic disk to basic disk, but he was already seen as a basic disk.

  Here is the initial configuration of the discs: http://image.bayimg.com/eaacoaadc.jpg

  What can I do pour machine to convert my?

  Thank you

  Have you tried

  Try the option "set up the machine" of the converter against the vmx file that you already have.
  
  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual