Satellite SP10-874

Similar Questions

• Cannot run recovery on Satellite P10 874 CD

  Hello
  Given that I had a lot of bugs and hang up, I gave my machine SATELLITE SP10-874 to a friend to load the recovery CD for me, he asked instead the NEW WINDOWS XP PRO, so that my machine with WINDOWS HOME EDITION venus. Now I am unable to run the recovery cd,
  Pls advice me how I bring it back to factory setting by loading Homexp.

  your response is much appreciated

  THX
  Bala

  What do you mean exactly?
  You are not able to boot from the recovery CD or what?

  To define the notebook back to factory setting you must simply boot from the recovery CD and follow the instructions on the screen.

  To boo from the CD, you must press the C key immediately after switching on the laptop. Alternatively, you can press the F12 key. Then a start menu should appear and then you may choose the CD/DVD drive as the boot source.

  Until you do this, the recovery CD must be inserted.

• Card wireless, not seen on Satellite P10 - 874

  Hello
  I have a Satellite SP10-874 (bought in Russia). I have problems with my wireless adapter windows just don't see it. No help, I found the drivers. I read similar messages on this forum, and in most cases, the problem was that the wireless card was just built into the laptop. But I'm 99% sure that mine has, as it seemed to work before. So if anyone can help, I would be very grateful. Thank you!!

  Hello

  I found information that the Satellite P10 874 has no wireless card. If the wireless card is onboard n this case, the card is listed and each unit with wireless card has a label of WLAN card in the lower corner.

  You can also check if you open the Wi - Fi coverage in the lower corner of the laptop. This cover is fixed with four screws.

  Good bye

• Registering SP10-874

  Can do some tips to register for my machine SP10-874? to get the updates specific, since there are many updates for SP10 models and my model is not mentioned in the site. I am already registered for warranty.

  Hello

  Allmost different Toshiba models are specific to a country if you can only register your P10 on the Toshiba site in each country where you bought the laptop!
  (Here is a short list of all the European sites of Toshiba
  http://www.Toshiba.co.jp/worldwide/Europe.html)

  There, you can find the driver for the P10 874.

  As far as I know that it is not possible to register and get the Toshiba driver updates. Driver for downloading it is not necessary to register!

  Pete Bye

• Satellite P10 874: update BIOS wrong changes the serial number?

  Hello

  I have Satellite P10 874, my model number has erased the background after years of use.
  I recently did an update of the Bios of the Web from Toshiba site and realized more late it was for the SP10E models.

  Well my system did not fall down. (Part no) model number change if you update with a version of Bios, not intended to be your system?

  My system is still under warranty, but the new model series/number combo is shown as invalid global law database. My USB ports don't work anymore after that it showed a message of power surge.

  I need to go to the customer Service. Is there a way to retrieve my originial model no and not?

  Any help will be much appreciated.

  Concerning
  lejoe

  A 'bad' Biosupdate does or does not replace the modelnumber of your machine. So you don t have to worry when you give the machine to a service centre, they have the ability to retrieve your serial number with their system and understand the modelnumber of your machine.

  With regard to your USB ports: send the machine to your local concern for service-center and Don t on the modelnumber stuff. Your machine is still under warranty and since they will change about your pcb, your worries on the bad bios system is useless.

  Furthermore, I can't imagine that you seriously a bad bios Flash, since the machine during the biosupdate ususally scream if you try to Flash a bios wrong on it.

  Welcome them

• Satellite P10 874, strange problem

  Ok
  Hi everyone I don't no how to start my problem is a problem and a story at the same time, I'll tell you one thing will help in the history that I live in Egypt, but I bought my laptop in Dubai
  I worked very p10 will during the first week but suddenly the usb ports stopped working all at once
  I went to Egypt to toshiba and I gave them the p10 but couldnot fix so they told me that I have to change the motherboard, I said okay, but they said that you are on the international interest of the motheboard is free but you must pay the tariffs on $300 to 500 and that's a lot of money
  so I sent the laptop with my brother to the Kuwait for toshiba it (he was there) they set the laptop and I have not paid anything
  but when I got the notebook back I found that missing something missing wireless 802nd motherboard they bring is not the same as the dose of a new not a WiFi connection
  I am really upset, I look on the net for toshiba service customer to tell them, but I have found no email or something which would do anything if he has Aproblem with one of the toshiba branches who must go and say
  I know wana
  and there is another thing that would be someone knows the detailed characteristics of his computer

  Hi, the Toshiba Page for the Middle East is->

  http://Gulf.computers.Toshiba-Europe.com/

  Then click on 'Information and ideas' look 'inside Toshiba. " You will find 'Contact Toshiba'.

  I think it is the best way to apply directly to them (or distributor).

• Satellite P10 infrared device question

  I have the following question:
  I'm trying to connect a mobile phone via an infrared connection and use it as a modem GPRS under Windows XP Home SP2 on a Satellite P10 874. When the phone is in range, the laptop detects via the infrared port and I can upload files to the phone.

  In order to use it as a modem, I need to install a modem with the phone driver. But there is no infrared COM serial port in the list of ports (like the P10 has no serial port COM, there are not), so I can't create a new modem.

  Is it possible somehow to create a standart (for Windows) com port via the infrared port of the P10 (I think it's the way work the drivers of some infrared USB cards - create a virtual com port) so that I can create a modem for the mobile phone.

  Hi, Simeon,.

  I sometimes use my mobile phone as a modem, but I use it via Bluetooth. In my opinion, is that infrared is good for data transfer but is not fast enough for the Internet (speed limit of 4 Mbps) connection. Data transfer rate is too low and the connection can be interrupted. As far as I know that it is not possible to choose any COM port in your case.

  For small data transfer with the mobile phone's infrared adequate, but for the internet connection where you transfer speed to build a page it will be not enough quickly.

  My suggestion to you: pick up some information about Bluetooth technology and it will be ideal for you. I use my Bluetooth phone and it works perfectly. Setup was very easy.

  If you make a decision to make connection through Bluetooth and there may be a few problems I can help you.

  Good day.

• Satellite P10-304: USB does not work after the upgrade to XP Pro

  You just bought a satellite SP10-304. Beautiful machine, but comes with XP Home edition. I've updated to XP Professional but seems to have lost the USB Ports. Device Manager indicates that they are working, but plug 'all' USB devices produces no reaction/recognition.

  Any ideas, please? What I put in the recovery disc and go back to XP Home?

  Thank you

  Ian

  Have you installed Microsoft all MS on this unit?
  I recommend that you install all updates.

  Win XP Home uses the same drivers as WinXP. In this case, everything should work without any problems.

• Change the HARD drive in the laptop Satellite P10-304

  I bought a new hard drive for my laptop toshiba satellite sp10, can someone tell me were the hard drive is in the laptop, so I can change it as it does not tell you in the instructions booklet
  Thank you
  jm75uk

  Hello

  For some portable models change HARD drive is very simple and not complicated. Change the HARD drive in your case will be not so easy, and in my opinion, you should contact the service partner. I don't know how old is your laptop, and if the warranty is still valid, but as Tobi said if you open the Briefcase with laptop computer on your own, you can lose the warranty.

  I don't know, but the HARD drive should be placed somewhere under keyboard because on this model there is no coverage of HARD drive in the lower corner.

  Good bye

• What memory you choose for Satellite P10-304

  Hello
  I have Toshiba Satellite SP10-304
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=UK&PRODUCT_ID=75423

  I want to express the memory, but I don't know what should be the number of the memory model. Could you explain to me? Manuals say use 'PC2100 or PC2700' compatible but now I have the idea of what I have. I want to add more than 256

  Hello

  You must use the Toshiba recommended memory modules but the Kingston works correctly on your laptop.
  Please check this information memory upgrade site:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7088&ft=m&St=3

  You will find compatible modules.
  According to this page, you can pass it to 2 GB
  I think you can use PC2100 and PC2700 modules

• Sam SP10-804: XP Home think that control key stuck (XP SP2)

  Satellite SP10-804
  XP Home as most installed SP2
  Sometimes XP think that the Ctrl key is stuck. It is therefore impossible to open a session, Word wants to start in "Safe Mode" C is always Ctrl-C, etc., and the only solution I have found so far is a reboot.

  The CTRL is really stuck. I have a keyboard utility which indicates that a button (including the CTRL key) is pressed. When this problem is present, the utility does not indicate that the key is pressed.

  If something in Windows got upset. For now, it's a real pain because I have some serious calculations that past will have another 8 or 9 hours to complete, so I can't restart the PC.

  I think rather that I have to press a combination of keys accidentally cause this problem to occur, but I have no idea of what keys. Anyone know
  (1) why this problem occurs
  (2) how to fix the problem once it has occurred
  (3) how to stop the problem does not happen
  TFAI

  Hello

  It is very interesting to post, but unfortunately it is not easy to give you a proper answer. In my opinion there must be a problem with the keyboard. If I understand your right that applications think CTRL key is pressed constantly.

  If you think that this operating system got upset reinstall it with the recovery media. Only in this way you can be sure if the problem is caused by the OS or the keyboard.

  Good bye

• Boom P10 304 AC adapter 4.7 has enough? confused

  Hi, I am the owner of a Satellite SP10 304 and recently a problem with the AC adapter cable and needed to replace it... at the same time (as I did buying online), I decided to get a replacement fast using a FPS NB 90 19v but only 4. 7A instead of 6 has required and noticed yesterday that the portable lights up no problems, but the battery went funny and not billed at all to unload until the end and I could only run the laptop without battery, I know it's a problem old as I am confused about the whole debate of "should the pc powered by the AC adapter all online and not using the power of the battery"... so I left the computer laptop but incharge all night and this morning the battery was completely filled to the top and test it this way... let the laptop with the battery only to carry out of up to 80% and turn the machine on starting load as it should do... should so it will be ok? It is seems to behave ok now, sorry this larbi but I was tip in the rechanging of power due to the low Amper is true? is 4. 7A on the replacement device enough to charge the battery?

  Hi Marco,.

  If I understand correctly your laptop POWER supply works by drawing current from the power supply (if connected), or battery when AC power is missing. In addition, current surplus will come from the power adapter to recharge the battery when necessary.

  Your problem will be a lack of power available when the laptop uses applications heavy drain and there is not enough current available from the new AC adapter to meet demand. I suspect that in these circumstances that the PSU will go to battery power, even if the adapter is connected and drain the battery.

  When you run the lighter applications on your laptop, then there will be enough current to charge the battery normally.

  I think it would be better to get a power adapter with the capacity recommended for your laptop if you are running heavy applications of drain.

  HTH

• Problem with WiFi adapter (RTL8187b) on the Satellite L350-146

  Hello.

  Problem with WiFi (RTL8187b) on the Toshiba Satellite L350-146 adapter:

  Exchange of packets of 192.168.0.177 with 32 bytes of data:

  Reply from 192.168.0.177: bytes = 32 time = 3ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 4 ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 6ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 874ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 364ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 3ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128

  Ping statistics for 192.168.0.177:
  Packets: sent = 50, received = 50, lost = 0 (0% loss)
  Estimated duration of admission, transfer to ms:
  1msek = Minimum, Maximum = 874 ms, average = 34 ms

  Win Vista HP, drivers last.
  This problem with different access points.

  Sorry for bad English may

  Need to check if theres no interferense in your plase, check also if the WiFi adapter is ok!... you can do this reinstalling the driver and check if it works if not you have to go with an ASP in your area to check the Wi Fi card...

• In google maps, after seeing satellite or view, links on the map does not work, I have to charge google maps and start all over again

  When I open google maps, the links displayed on the maps can be used. However, if I change to a view street or satellite view and then return to the display of the base map, links displayed on the map is no longer working. I have to leave google maps and reload to get the links to work again.

  Hello peterronald, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• 13 "Macbook Pro retina heats up on the bridge and google maps satellite

  Hello!

  I have a 13 "Macbook Pro retina

  I noticed that when using google satellite view maps (no matter if in Safari or another browser) my Mac begins to quickly heat up to 102 degrees Celsius (I use https://www.seense.com/menubarstats/ to measure the speed of the CPU temp and fan, but even without any application, you can easily feel the high temp and hear the blowing fan) the fan also starts to blow at maximum speed. When I left the site everything returns to normal.

  Same thing happens when I discover the overpass in Maps.app. When I left the temperature goes down to normal.

  I can compare the situation with my MacBook Air a years more and I have none of these problems in this regard. Strange that both Mac have only the Integrated GPU. No idea what may cause heat upward? Dealing with the satellite or view 3d demanding for rMBP but not for the older MBA buildings? Both on the latest version of the model

  Thank you!

  Hello there, villovsky.

  Looks like you see increases in temperature and fan problems when using particularly intense applications on your MacBook Pro. The following Knowledge Base article offers up to large initial measures for troubleshooting:

  Reset the management system (SCM) controller on your Mac.

  Before resetting the SMC

  Reset the SMC only after trying all the other standard troubleshooting. Try each of the following steps in this order before resetting the SMC. Test the issue after performing each step of troubleshooting to see if the problem persists.

  1. Press Command-Option-ESC to force stop any application that is not responding.
  2. Put your Mac to sleep choosing sleep from the Apple menu. After that he went to sleep, to wake up the computer.
  3. Restart your Mac by selecting restart from the Apple menu.
  4. Stop your Mac by choosing stop from the Apple menu.
  5. If your Mac does not, forcing the Mac to stop by pressing and holding the button for 10 seconds. You will lose any unsaved in all open applications work.

  If you are using a Mac laptop, which is the power or battery issues:

  1. Unplug the adapter from your Mac and the electrical outlet for a few seconds, then plug it back.
  2. Stop your Mac.
  3. Remove and reinsert the battery, if it is removable battery.
  4. Restart your Mac.

  If the problem is still not resolved, you may need to reset the SMC. See indicators and the steps below.

  

  Indicators that need to be reset your SMC

  After you perform a standard troubleshooting, these symptoms can indicate that a SMC reset may be necessary:

  • The computer fans operate at high speed, even if the computer does not have a very heavy use and is properly ventilated.
  • The backlight on the keyboard not behave correctly on Macs with this feature.
  • The led State (SIL) not behave correctly on Macs with this feature.
  • Battery LEDs, if present, are not well behaved on laptops Mac with a non-removable battery.
  • The backlight of the screen does not correctly to changes in ambient light on Macs with this feature.
  • The computer does not respond to the when you press the power button.
  • Mac laptop does not properly when you close or open the cover.
  • The computer sleeps or stops unexpectedly.
  • Battery does not charge properly.
  • The MagSafe LED power adapter does not have the correct activity.
  • The computer performs exceptionally slowly, even if she is not experiencing abnormally high CPU utilization.
  • Application icons can bounce on the dock for a while when opened.
  • Applications may not work correctly, or they may stop responding after the opening.
  • A computer that supports target display mode does not switch in or out of target display mode as expected, or it goes in or out of view target at unexpected times.
  • Autour lighting of on a Mac Pro I/o ports (end 2013) does not turn on when you move the computer.

  

  Reset the SMC on Mac Laptops

  First determine if the battery is removable. Computers Mac notebooks with a non-removable battery include MacBook Pro (early 2009) and later, all models of MacBook Air, MacBook (late 2009) and MacBook (retina, 12 inch, early 2015). Learn more about batteries for computers laptops Mac.

  If the battery is good behaviour

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  If the battery is removable

  1. Stop the Mac.
  2. Unplug the MagSafe from Mac power adapter.
  3. Remove the battery. (Learn about removing the battery in the MacBook and MacBook Pro computers).
  4. Press and hold the power button for 5 seconds.
  5. Reconnect the battery and the MagSafe power adapter.
  6. Press the power button to turn on the Mac.

  The LED on the MagSafe power adapters could change State or temporarily disable when you reset the SMC.

  Thank you for being a part of the communities of Apple Support.

  Kind regards.