Wi - Fi dies in Satellite A100/002 with Vista Business 64-bit

Similar Questions

• Satellite A100-011 with Vista: DVD-ram UJ-850 s can not burn DVDs dual layer

  Hello

  cannot find answers to my problem, so start a new topic.
  Having Satellite A100-011 with Vista preinstalled and Mat * a DVD - RAM UJ-850 s (firmware 1.10).

  Recently installed Nero 7.5.9 and you want to burn DVD (6, 5 GB) media dual layer (Immation - Ritek).

  First time Nero stopped with information: could not perform start of Disc At Once (without damaging the media).
  After that, run Nero as Windows XP - SP2 program and burn half the disc (first layer), but when to start to burn the second layer (I guess), stop once again with the same error information (could not perform start of DAO).

  Simple disc burning layer without problem.

  Anyone any idea how to solve this problem?
  Thank you
  Luci

  Hello

  tried to record double-layer of a different brand? Maybe you should try it, because sometimes certain brands are not really taken in charge or not very well. And check the toshiba (or google) pilot site for new drivers or firmware for this drive, sometimes that it really helps.

  I think that the media are not really compatible, I ve read some similar problems in the roxio forum and they solved by using another brand.

  Would be nice if you give some information on this case... :)

  Welcome them

• Its virtual does not support my Satellite A100-998 with Vista

  Hello.

  I have the Satellite A100-998, and yesterday I find for my driver the new laptop. I download Virtual Sound to my laptop and for vista, and when I try to install the driver that I have error "Toshiba Virtual Sound can't stand your computer." Why

  PS. Sorry for my bad English, but please help me!

  Hello

  I think the problem is that your computer has a sound card, which was designed for XP and not Vista. Thus, you need to download a special driver
  to make the Gizmo work.

  Try here:

  http://209.167.114.38/support/download/ln_byModel.asp

  and tell us if it worked.

  Welcome them

• Satellite A100-049 with Vista--> Win DVD won't play?

  Just bought the above. Everything seems great so far (but it was only 2 days) apart from when I try to play a region 2 dvd in the drive. I select WinDVD 8 and it offers the possibility to open from the folder by car. I select 'f' is the disk and the disk rotates upward. No image or its property. The initial screen is right on. (They will play in library car seems fine)

  Cannot see everything change and the drive is set to region 2. Research in the "getting started", he says that to the final version of vista, it "may" be necessary to download a patch, but I can't find one.

  Any help appreciated

  Hello

  Are you trying to play original DVD?
  If your DVD player was attached to another region it is possible that you will not be able to play these DVDs.

  You can change the region code in the properties of the drive. But be careful; You can change it only 4 or 5 times (don't remember)
  But if you can play movies with MCE so I think you need to change the drive region code.

  Have you tried to install some codex? Otherwise, try it!

• Vista + value added Package does not work on the Satellite A100-002

  Hello

  I have a laptop Toshiba Satellite A100-002, and I am running windows vista.
  I tried to install all the drivers, but I can't do it with value-added Packege. (VAP)

  I got this error message:
  [http://kepfeltolto.hu/i/?173242&t=img]

  I need that the programs included in the VAP.

  Pls help me!

  Thank you...
  David

  Hey Buddy

  Today, it's lucky day you ;)
  Why?

  I have a solution for you.
  The ID_ERR_NOTINSTALLTVALZ error message due to an old version of the BIOS.

  It should Flash the newest BIOS with compatible BIOS which can be downloaded from the Toshiba driver page.

  See also this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20471&MessageID=75256

  It describes the same problem and it confirms that a BIOS update should help.

  Concerning

• Satellite A100-002 - freezes when installing Windows 7

  Hello

  I have 1. Satellite A100-002 and 2. big problem with the installation of Windows 7.

  2 years ago I tried to install Wista - but it froze during installation, whenever I tried. of course, I tried different versions of Wista.
  Once I managed with installation - but he keep gel al the time - immediately after departure.
  so I gave up - and I'm back to XP

  now I'm trying to install Windows 7 and again the same problems :(

  can someone tell me whats wrong? -a really need him.

  Thank you very much

  Hello

  When the laptop just hangs?

  In addition you using SATA drivers or install it in compatibility mode?

• How to use the recovery on the Satellite A100-192 with 2 partitions CD

  I have a satellite a100-192 with 100 GB hard drive.
  When I bought it I used magic norton 8.0 partion to divide the disk into two partitions, c drive (used for files of program and other things; 20 GB) and d ' drive that I use for all my documents, music, videos and similar stuff...

  and now, because of a few bad shots, I made (the software bad... lol) I want to reinstall windows. and honestly, I have no idea how to proceed. what I mean, I don't know what cd to use (I have two CD when I bought the computer), in fact I guess that's the one with ms a note on it, but how to do it safely without losing all my data on the d drive?

  The problem is that I did a lot of relocations on desktop computers when you hava clean facilities and then I know what I'm doing, but I have no experience with bundled windows installations.

  Hello

  Usually, Toshiba laptops are supplied with a Toshiba restore CD.
  On this CD, you will find the image of Toshiba which contains all Toshiba drivers and utilities.

  The question is what CD image you received.
  Some people here in the forum suggested that, since January 2006 the Toshiba Recovery CD supports another recovery procedure. The new recovery CD does not support the ghost but the surface RECO and it s not possible to choose the partition for the installation of the OS.
  In this case the whole HARD disk will be deleted and you will lose all your partitions.

  I have only one old recovery CD and so I can't say if it is possible to choose the right partition. It was possible on the old recovery cd by selecting the expert mode.

  In my view, that should make a backup of you all important files before you begin the recovery procedure.

• Satellite A100-192: after Vista installation HARD disk capacity has decreased

  I am a user of Satellite A100-192 with 120 GB hard drive. After I installed Vista Ultimate, I saw this total capacity of my hard drive completely passed to 92, 8 GB instead of 120 GB while it was XP.

  What can be the problem? How can I reach the other capabilities of my hard drive?

  Hello

  Vista needs and used 2 partitions. The second partition is not visible and it s necessary to Vista backup and restore functions.
  Maybe you have verified that the size of the first partition (C) and didn't note the size of the second partition.

  Concerning

• Satellite P100-160 with Vista: No TV-OUT after downgrade to XP

  Hi guys hope you can help me out here...

  I recently bought a laptop (satellite p100-160) with Vista on it to know that it was not compatible with wot I bought dethrone so I decided to downgarde for XP Home Edition... Solange decommissioning that I had to install a few drivers like there's do and everything went well...

  Anyway, a few weeks later (yesterday), I went to watch a movie and when I pluged in my tv out cable, I have nothing. I tried to unplug and plug in again a few times but still nothing, it normally switches on in about 20 seconds... So im guessing that either I need to a driver or a Summit.

  Can someone help me out here?

  Thanks a lot

  You n t need a special driver to use the s-video port.
  You must install only the compatible graphics driver.

  How have you tried to switch to the TV device?
  Have you used the FN + F5 key combination?
  You should do this.

  Connect the TV to the laptop using the s-video port. Then select the s-video on the TV and choose the right channel.
  Press the FN + F5 several times until you get a picture on the TV.

  Please note; Don t start the DVD software like DVD win until you have not enabled on TV!

• Re: Satellite A300-145 with Vista 32 maximum RAM?

  Hi all!

  I have satellite A300-145 with Vista 32 home Premimume - now on laptop installed 2 modules of 1 GB of RAM (for mode dual channel)

  Q: if I replace the RAM to 2 modules of 2 GB of RAM this mode dual channel still & 4 GB RAM?
  -May support A300-145 4 GB RAM? and Vista 32? (Intel GM965 chipset have support 4GB RAM)

  Hello

  Satellite A300-145 was equipped with a Mobile Intel GL960 Express Chipset. Or I m wrong?
  AFAIK this chipset provides only the 2 GB support

  > If I replace the RAM to 2 modules of 2 GB of RAM this mode dual channel still & 4 GB RAM?
  32 bit Vista will recognize only about 3.2 GB.

• I have a desktop computer with Vista business I want to upgrade to Windows 7 and install Vista on a laptop that has XP Pro but is Vista capable.

  Transfer Vista Business on XP Pro computer.

  I have a desktop computer with Vista business I want to upgrade to Windows 7 and install Vista on a laptop that has XP Pro but is Vista capable.

  Hello

  If you use the Vista licence as part of the upgrade to Windows 7 you cannot use the license of Vista anywhere elsewhere

  It is part of the upgrade process

  and also read this on licensing rules;

  If Windows was preinstalled on your computer, Dell, HP, etc., or you bought an OEM/license disk, they are both classified as an OEM license and are not transferable.

  The Windows OEM license is linked to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a retail Windows license, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  A single license is a single Installation.

• Cannot install PSC1610 with Vista Business

  He used to work fine with Win XP Pro SP2.

  Trying to install AIO_CDB_Full_Non - Network_enu.exe with Vista Business, I get the message:

  Care HP Installer option stopped working.

  The details are:

  the APPCRASH problem event name

  hpzrcv01.exe application name

  Professional version 8.5.0.70

  application time stamp 458b04f3

  module name msvcrt.dll error

  version of the module fault 7.0.6001.18000

  Error module time stamp 4791a 727

  exception code c0000005

  00009b 30 offset exception

  OS version 6.0.6001.2.1.0.256.6

  Locale 1033 ID

  additional information 1 c501

  more information 2 006148daa305aae87b08cb8439f90d23

  additional information 3 21A

  additional information 4 b1c4dcb716c17407643518c57dd42f3e

  Thanks in advance for your help.

  If you click on "View installed updates" on the left and check this list too?
  
  or if not, try this: LINK-CLICK HERE

  Message edited by DexterM on 01/24/2009 01:14

• How to install Windows XP Home SP2 to a Dell 755 Tower comes with Vista Business installed?

  OK guys,

  I aquried a used Dell 755 minitower that had wiped HARD drive, but originally shipped with Vista Business installed o/s. This computer still had the sticker code product key for Vista Business on the computer.

  I have a Windows XP Home SP2 OEM disc with a product code and tried to install it on this computer, but I get an protection windows with a blue screen error whenever I tried.

  I have a Vista Home OEM disk basic with its own key code product. The computer has allowed me to install this operating system, but not would allow me to use its product key code, but would allow me to use the old Vista Business key product code that was on the computer and complete the installation. Everything was fine, but I just don't like Vista o/s and I would like to install my OEM Windows XP Home SP2 to this computer and high grade it to SP3.

  In dealing with this computer, I discovered it would allow me to load Windows XP Pro just find, but I was using a copy borrowed this o/s and had to uninstall if I could return it to its owner. I also borrowed a copy of Windows 7 OEM I installed in this machine and it works just fine, but I had to uninstall it to return to its owner.

  I still want to know why I can't install Windows XP Home Edition for this machine.  Does anyone have information about this situation or a way to solve it?

  Btk (billy the kid)

  Looks like the drive you borrowed your friend had a SATA driver integrated into it.  What you can do, is go into the BIOS and change the AHCI to IDE mode.  This should allow you to install XP.  Or you could use a floppy disk and install the driver by pressing f6 during installation.

  Don't forget: OEM keys are related to the original motherboard enabled on.

• I have a laptop that was originally shipped with Vista Business. He was then recharged to Windows XP.

  I have a laptop that was originally shipped with Vista Business. He was then recharged to Windows XP. I am trying to reload Windows Vista but I only have a Vista installation disc Home premium and the activation code for Enterprise edition is not be accepted. Is it possible to download the Enterprise edition or get a new activation code?

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Vista Business 64-Bit with AutoCAD 2009 does not seem to use all 8 GB of RAM available.

  A workstation newly built (S5000XVN Intel / Xeon / 8 GB RAM / 2 GB RAM video) with Windows Vista Business 64-bit is used with AutoCAD 2009 (64-bit).  The workstation hangs under stress, apparently because not enough RAM is available.  ("Stress" is "Turning entirely made of a certain complexity 3D drawings")

  The Task Manager / Performance tab indicates never to use RAM above about 3.25 GB, even if ten or more concurrent applications are loaded, including IE 8 (6 graphically heavy windows) and AutoCAD with 6 or more complex drawings open at the same time.

  There are two issues, I think:
  1. in the event that a busy workstation indicate use RAM above the 32-old bit of 3.2 GB limit?
  2 are there MS Windows Vista settings that are necessary to ensure the use of RAM available?

  Thanks in advance.

  Thanks for the reply.

  I studied the installation of AutoCAD 2009.  It's actually the 64-bit version that is installed, and the Task Manager reports it as a 64-bit application when it runs.  (In other words, it is not marked as a 32 bit application.)

  I must admit that I no longer believe that the machine is running out of resources or do not use all the resources available to it.  We tested the machine by throwing 18 complex, fully rendering the 3D drawings within the Academy, in addition to two cases of IE 8, three instances of Explorer Windows and MS Windows Mail.  Use of the RAM did climb, reaching finally the 4.06 GB, clearly indicating that the 32-bit 3.2 GB limit has been exceeded.  It seems that just drawings don't take up that much RAM.  BTW, there was no increase in the paging activity that I could see.

  However, the application does not seem to be frozen or looping when the client attempted to turn one of the drawings.  The CPU on the two wires (Xeon processor) usage increased to 55% and remained there. the State of the process, as reported by the task manager went to "Not responding" and stayed there; and the display of the image froze on an empty workspace, with a three seconds flash drawing on every 20 seconds.

  So: It now seems that there is a problem with AutoCAD, not a Vista problem.  I would appreciate comments, however, if you think that this analysis is wrong, incomplete or based on wrong assumptions.

  Thanks for your help.