Satellite U200: FN + F8 WLanHotkey does not work after the re - install

Similar Questions

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• Satellite P300 - Value Added package does not work after the computer restarts

  Hello

  I have a Toshiba Satellite P300 PSPCCA Windows vista ultimate x 64. I can't do my work button soft touch. I downloaded latetest VAT package and installed. After installation it asks to restart but I restart my laptop and I make just restart Flash Card and my button works all good touch app that is silent, Media Player, etc., but once I restart my laptop it stops working.

  I tried the uninstaller and reinstalling but no luck. I read in the forum toshiba on running CCleaner and do a fresh install but still have the same problem.

  Does anyone of you knows how to solve this problem.

  BTW, I got the software AVG internet security on my system, but have added folder toshiba for exclude of realtime scanning just in case if its causing problems but not luck. I searched qurantine folder and its nothing in there.

  Please help me get my work button soft touch.

  Thank you.
  Kind regards
  Jay

  Post edited by: Jay Padia

  Hello Jay

  I agree with Akuma. All you can do is remove VAP preinstalled system and reinstall the latest version. Why you didn t follow the instructions to restart the computer after the installation of VAP?

  I installed VAP several times on my Satellite P200 and Satellite A300 without any problem, but after installing the latest version, I rebooted phone immediately. The procedure of the facilities has been completed and necessary processes started in the background. I guess that's the problem on your Satellite P300.

  If nothing is done the last step is to install the OS by using the DVD facilities. After doing this you will own preinstalled OS and everything works well again.

• Re: Satellite P305-S8820 - FN key does not work after a clean install of Windows 7

  I have a problem with a Satellite A210-103. After installing the Toshiba value added package (cards Flash Support Utility) unavailable for A210, reboot, reboot Toshiba Flash Cards and by pressing the FN key several times the problem still exist.

  There must be other reasons why so many users have problems with the FN keys.

  John

  Hello John

  This with the FN keys can be really problematic. I got my Satellite A300 luck with FN feature.
  What you can try is to check if the Flash memory card support utility is available for your laptop model, or maybe A200.

  Try to install, reboot the laptop and check again the feature keys FN.

• Satellite L655 touchpad button ON / OFF does not work after the installation of VAP

  Why the Start button / stop the touch pad does not work after the installation of vap?

  May I ask what system and what PPV version do you have installed?

  I assume you mean on the Fn + F9 key combination...
  Is this right?

  Another FN button work as shouldy?

• My apple pencil does not work after the 9.3.4 update.

  My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

  < re-titled by host >

  Greetings RechargeableJam,

  Welcome to the communities of Apple Support!

  I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

  First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

  Best regards.

• Want to dv6 Notebook PC 7226nr: scan fingerprint hp simplepass does not work after the upgrade to windows 10

  My HP SimplePass fingerprint reader does not work after the upgrade to Windows 10.  Is there a fix for this yet?

  I thought about it.  The upgrade to Windows apparently damaged 10 HP SimplePass software.  Once I uninstalled and reloaded the program, everything started working.

• LIP does not work after the installation of a local language, writing in my windows software 8

  LIP does not work after the installation of a local language, writing in my windows software 8

  

  This icon is hidden... and there is no preview in the installed LIP.

  
  I hv uninstall the software, but for the LIPS does not work

  Hello

  You use the Microsoft Account or Local user account?

  Create a new user account and check the status of the question in the new user account.

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-8

  You can also refer to:

  User accounts: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows-8/user-accounts-frequently-asked-questions

  Thank you.

• Serial number does not work after the transfer of OSX and apps for the new Macbook Pro

  My serial number does not work after the transfer of applications and OS X for my new Mac.  Although the Adobe specifications say it is compatible with the older OS X, it does not seem to have no compatibility issues because

  -My old Macbook Pro has Yosemite and was fully running CS5 Web premium without a problem.

  -My new computer has the same * exact * OS X transferred in which the suite was fully functional with the trial.

  A support of top-level, software engineer, or someone who takes care of the soap operas could

  -Please provide a number of test series to test with?

  - And/or activate my series?

  - Or show how to disable the publication series on the old disk hard if I can't use the old computer?  So that I can use with the new computer?

  I chatted with technical support that keeps saying that it's a compatibility problem, to install with old OS X or buy a newer version. But I know that CS5 works with Yosemite (as I use it myself), and the only question I had is that serial # says invalid, which is separate from the functionality of the program.

  I'd rather not spend hundreds more to get a new suite, when I spent a lot for CS5 already and know is fully functional on Yosemite.  I have also not return to an older operating system and break things.

  Moreover, I used to be a general technical Support and I am a coder of web applications, so I understand that this isn't just some sort of "reboot" of the question

  No info to solve this, or a means to achieve at the highest level Tech support, would be greatly appreciated!

  Thank you!

  Transferred apps will certainly question of activation, because licenses files creation is completely dependent on machine, it willl created according to the particular Machine ID, if you transfer the application from one computer to another, there is incompatibility.

  Therefore, it is very necessary that you are using the original installation media.

  Download the CS5 products

  If you do not agree with the process of removing and reinstalling, try wiping the contents of SLCache and rename the SLStore folder.

  
  

  WARNING: Do not forget once erase you the contents of this folder, all Adobe applications will ask the new license or re-enter the serial number.

  Location: /Library/Application Support / Adobe.

  It is strictly recommended to install Adobe applications using the original installation media.

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

• Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

  My touchPad does not work after reinstalling XP Pro OS with recovery disk. I install a driver for Toshiba M30 - 701 Synaptics TouchPad tpdrv-sp-m30-xp - 7920.zip

  Can you help me solve the my problem please?
  Excuse my bad English...
  Thank you
  Jorge Neto

  HI Jorge,.

  If you have reinstalled your system using the Toshiba recovery disks the touchpad should have the right drivers and be fully functional. I seem to remember that it is possible to disable the touch pad using one of the "keyboard shortcuts" (F9 on my SA30) in order to check that it has not been inadvertently pressed.

  Kind regards

• Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

  After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

  Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.

  Hello

  you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

  It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
  Would appreciate comments on your success.

  See you soon

• Satellite U940 - 4000 Graphics Intel does not work after upgrade from 8.1 to win

  I've updated my Satelite U940 11 X 8.1 Windows (from 8.0) and now my Intel Graphics 4000 does not work.
  The Device Manager shows Code 43: windows has stopped this device because it has reported problems.
  I try to download a new driver from Toshiba, but this is not possible. Whenever the download stops.

  Probably for a lot of traffic on the connection

  Were you finally able to download the driver?
  I could download the package without worrying about performance too

• USB ports on the Satellite L30-105 does not work after the downgrade from Vista to XP

  Hello

  Model: Toshiba L30-105 PSL33E-02S02HFR.
  USB ports (2) do not work after the downgrade from vista to Windows xp family. All the drivers downloaded from Toshiba Web site.

  Thanks for any help,

  Camellia,

  Have you installed Win XP all service packs?
  SP2 provides some patches on the USB feature.

  You definitely need to update the Win XP OS

• On my trackpad scrolling does not work after the upgrade to 12.0

  On my trackpad scrolling does not work after update Firefox from version 3.6.28 to version 12. It normally works in Thunderbird, and other applications. It is a Lenovo T61 with XP Service Pack 3 and all drivers up to date. Version 3 seems to have bad memory leaks so I would like to upgrade, but I can't do it without scrolling. I would appreciate any advice.

  Try to change the pref ui.trackpoint_hack.enabled on the topic: page default config-1 to 0 or 1 to see if that makes the work button.
  
  Close and restart Firefox after changing the ui.trackpoint_hack.enabled preferably.

  • http://KB.mozillazine.org/about:config