Satellite U400 - 14 M - BSOD during XP installation

Similar Questions

• Satellite L500-164 - BSOD during XP installation

  Hello.

  I installed Windows 7 Professional 64 bit and everything was working fine... no probs. But now I want to install Windows XP (32-bit standard edition) on another partition, but it does not work?

  He gets in the installation CD, it loads the hardware drivers (the first step), but then, when he must step in partitioning menu or "where you want to install xp" - menu, it gives me a blue screen with information: (it's in German, I try to translate it):

  It has encountered a problem. Windows has shut down to prevent damage to your computer. If you get the error message for the first time, you must restart the computer. If this screen appears again, follow these steps:

  Search your computer for viruses. Cancel the registration of any newly installed hard drives or hard drive controllers. Make sure that the disk is properly configured. Run CHKDSK / F, to determine if the disk is damaged.

  Technical information: * STOP: 0x0000007B (0xFA36063C, 0xC0000034, 0x00000000, 0x00000000)

  I tried a lot of things. I formatted all partitions with a live cd of linux, so now the hard drive is completely empty, however, does not work. I guess that windows 7 (64-bit) caused the problem... but WHAT?

  Can someone help me please? I'm going crazy here... I just want to install xp, nothing more... :/

  Info: My laptop is a satellite L500-164

  Which WXP both of you are trying to install (SP?)?
  You have to load the SATA driver on startup?

• Satellite A30: Error BSOD during Vista installation

  Hello
  I tried to install Windows Vista on my Toshiba laptop (Satellite A30).
  After booting from the CD to install, in 1 minute, I get the following blue screen error message.

  "The BIOS in this system is not fully ACPI-compatible. Please concat your
  system for an updated BIOS to update vendor. Technical information: * STOP: 0x000000A5
  (0 x 0, 00000011 00000007, 0xFFD0D010, 0x0100000E) »

  I searched in Google and Microsoft Sites on this problem and I found that the problem of ACPI and it may be one of this thing:
  --------------------------
  (0 x 000000011, parameter 2, parameter3, parameter4):

  The system cannot enter ACPI mode. There are several reasons for this, including:
  The system cannot initialize the AML interpreter.
  The system does not find the descriptive table of the root system.
  The system cannot allocate a critical driver.
  The system cannot load the descriptive table of the root system.
  The system cannot load device descriptor blocks.
  The system cannot connect to an interrupt vector.
  The SCI_EN (System control interrupt enable request) cannot be set (see 0x00000001).
  The of ACPI Table checksum is incorrect.
  ACPI is a hierarchical organization of tables, each relying on the other to define the full functionality of the system and each device in the system. ACPI starts by looking for the Description of the root system table, which points to the next table, which points to the next table, and so on. Usually, the error 0 x 000000011 occurs because as these tables is damaged or missing.
  -----------------------

  The BIOS has date of May 2004.
  BIOS type: Phoenix
  BIOS date: July 22, 2004
  BIOS ID: Phoenix NoteBIOS 4.0 release 6.0
  BIOS OEM: V1.80
  Chipset: Rev. Intel 3580 2

  It's the last BIOS availabel to the Toshiba support site.

  Is there a way to update ACPI in the bios or disable this error?

  Any help would be appreciated to greately.

  Thank you
  Algurashi

  Hello

  are you sure that you have installed the good bios from this machine? It could be, this bad bios downloaded you´ve, then the system does not work because of a bad bios.

  Just do the following: display the model number of your machine and I will guide you towards the good bios version, maybe we can solve your problem.

  See you soon

• Satellite A300-1QD - two questions during the installation of windows XP or Vista

  Nice day
  Here's my problem:

  1. I just bought the Toshiba Satellite A300-1QD and since there is Vista based on it and I have Vista ultimate, I decided to install on the laptop.
  After I formatted deleated everything and I have the partition that I created a new.
  After that I installed Vista, now I'm at the point where it says complete installation and the blow bar is at about 2/3.
  My problem now is that it's now been 3 hours and nothing happens the dots next to the 'installation complete' is still occurring and disappearing.

  2 as the number one lasted so long I decided to install windows XP Professional, but when it loads after that I put the cd one has bluscreen place called chkdsk.

  What should I do now to get something on what works?

  Hello. I think that the partition table and boot loader are messed up and it's your problem. You can try to chek to find errors and format your HARD disk with a third parity tool and try to install windows again.

• Satellite Pro 6100 very slow during the installation of Windows XP Home edition

  Hello

  We have installede Windows XP from our CD orig., XP is running very slowly and the mouse freezing of minute-to-minute. We can install Windows 2000 and it works perfectly. Try a new HD with the same problem, it has 512 MB of ram.

  Hello

  As far as I know this device is supported for Windows 2000 Professional and Windows XP Professional. Is there a similar situation when you use the original recovery Toshiba WXP Pro media?

  In fact, do you have a?

  By the way: I hope you're talking about the new installation without specific or additional preinstalled software you need!

• Satellite A100-192: blue screen during the installation of Adobe Premiere

  Hi, I need some help ASP...
  I bought a satellite A100-192 intel duo 2500 T with 100 GB hard drive and 1024 MB 533 memorry also has a vga ATI 1600 hyoer 512 MB memory,
  Try to install the first pro, but I got a bluescreen scrable.
  Can this program somehow in this laptop? any help is welcome...
  Thank you...

  Hi Theodor,

  I suggest that you try to reinstall your copy of Adobe Premiere, and if you still get the blue screen when trying to take note of the error message, since this will give you some clues as to the nature of the problem.

  If the blue screen appears too fast and forces the phone to reboot then just right click on the 'My computer' icon and select 'Properties', then click on the "Advanced" tab and in the "Startup & recovery" section click the "Settings" button In the next under the title of "System failure" screen make sure that the option restart automatically is not checked.

  Kind regards

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• Installing XP on Satellite P300 - 18 M - BSOD

  Hi guys,.

  problematic BSOD during XP installation (you want to rid the Vista laptop of course).

  BSOD 0x7B / 0034, making allusion to the missing SATA drivers I guess?

  OK, so the fact that follows: dl the pack of ATI XP drivers for this laptop, found the SATA drivers in there (the Lord alone knows why these are not offered for download separate drivers, they are after all the drivers and have little to with the Ati drivers card display; made me spend an hour too on this alread!)

  Slipstreamed drivers SATA in XP SP 2, using Nlite installation CD.

  So far so good. But the BSOD still appears. What the world did wrong?
  XP maybe really don't like the hidden partition bootmanager at the beginning of the HD?
  Not really want to Fdisk everything now and discover what he still BSOD on me.

  Any suggestions?

  see you soon,
  Henk-Jan

  Hello

  As far as I know, you cannot switch the BIOS AHCI to SATA after installing XP without SATA support. If you set back the SATA BIOS settings then you would get a BSOD.

  Satellite P300 - 18 M supports the Chipset Mobile Intel PM45 Express and this is why you need the Intel SATA drivers. You will find the Intel Storage Manager SATA drivers! Can also be downloaded from the Intel page!

  See you soon

• Good driver installation for Satellite U400-10 order

  I bought a Toshiba Satellite U400-10 opportunity and I would do a fresh install of Vista 64.
  The hard drive has been replaced, and I have no recovery disk.

  I think I found all the drivers and software from toshiba, but I would like to know if the below installation order is correct or needs to be adjusted. Thanks in advance for any help you can provide.

  _Archive/Software Installation Order_

  Microsoft Vista 64 Home Premium
  Microsoft Vista 64 Service Pack (SP1 & SP2)

  Intel Chipset Device Software
  Intel Turbo Memory & Intel Matrix Storage Manager
  Intel Display and HDMI Audio driver

  Driver audio Conexant CX20561
  Driver LAN Marvell 8040/8055
  Synaptics Touch Pad Driver
  OZ129 O2Micro Flash Memory Card Reader
  Intel PROSet Wireless Software
  Conexant Modem driver
  Driver Webcam Chicony
  Toshiba Bluetooth Stack
  Driver Toshiba SPS
  Java 2 Runtime Environment

  Toshiba Value Added Package
  Toshiba hardware configuration
  Toshiba supervisor password utility
  Toshiba Extended tiles for Mobility Center
  Toshiba Modem on Hold (Netwaiting) utility
  Modem of Toshiba region Select utility
  Toshiba HDMI Control Manager
  Toshiba Bluetooth Monitor
  Toshiba SD format utility
  Toshiba SD start utility
  TOSHIBA ConfigFree
  Toshiba Disc Creator
  Toshiba DVD player
  Acoustic silencer of Toshiba
  Toshiba face recognition
  Toshiba Speech System
  Toshiba TEMPRO
  Toshiba product information online
  Toshiba Assist

  Seems ok.
  Personally I follow than such orders because especially its any driver is installed initially, but some tools requires the installation of other tools.
  Thus, for example, value added package must be installed before you install other software from Toshiba

• Re: Satellite U400: operating system not found then the installation of the OS

  I have a toshiba satellite u400 with is come with VISTA.

  Because I don't like VISTA, I then installed WINDOWS XP with a multi boot.

  Everything worked well. But one day I want to resize my partitions I used Paragon partition manager.
  This product is required to operate only to resize my xp partition, so he asks me a start.

  And then nothing works.

  I try to fix my problem with a fresh install, but it seems that the boot sector was not correct.
  Then I completely format my hard disk on another computer with a USB CABLE.

  When I try to install VISTA, XP or LINUX on a CD or DVD, I ask the multiboot with F12
  I chose to boot from the CD/DVD built-in, but I get only "OPERATING SYSTEM NOT FOUND',

  It's as if the BIOS test the HARD to FIND something specific, and it does not find.
  When my PC worked correctly I could boot from the drive to dvd without problem.

  I called the SUPPORT CENTER of about 10 days, but I have no answer.

  So if someone could help me.

  Thank you.

  Hello

  OPERATING SYSTEM NOT FOUND message appears generally if the laptop has attempted to boot from the HARD drive and didn t find the operating system.

  But I put t understand why you formatted the HARD drive using the USB cable?

  Please insert HARD drive in the Bay of laptops HARD drive and check if the HARD drive is recognized in the BIOS!
  If the HARD drive has been recognised so I recommend you to take a disk Win XP Home and at the start of this disc.

  As I m not wrong not you will need to first install the SATA drivers to recognize the HARD drive.
  The fact is that the laptop supports the SATA controller and SATA drivers are needed to get the HARD drive recognized by Win XP.

  Well, after you have booted from the Win XP disc you need to format the new HDD by using the NTFS file format and should then follow with the installation of the OS.

  Check it out

• Satellite U400 - 138 (PSU44E) - order of installation of drivers for Windows XP

  Hello
  I have the Satellite U400-PSU44E. I had to install Windows XP Professional. Under XP I have problem with installing the drivers. I downloaded Windows XP drivers from the Toshiba web site.

  What is the correct order of installation of drivers for this model?

  Best regards

  Hi mido_92,

  I can give you the order of installation of my Satellite U400 installation and it worked:

  Windows XP SP3
  Windows updates
  Sun Java 2 Runtime Environment
  Intel Chipset driver
  Intel driver
  Audio driver Conexant CX20561
  Driver LAN Marvell 8040/8055
  Synaptics Touch Pad Driver
  Alps Touch Pad Driver
  Conexant Modem driver
  Modem region Select utility
  Intel Wireless LAN driver
  or
  Atheros Wireless LAN driver
  or
  Realtek RTL8187B Wireless LAN Driver
  Chicony camera software
  Bluetooth Stack for Windows by Toshiba
  Software/driver of fingerprints
  TOSHIBA common modules
  TOSHIBA SD Memory utilities
  TOSHIBA ConfigFree
  TOSHIBA Assist
  TOSHIBA Speech System
  CD/DVD Drive Acoustic Silencer
  Toshiba HDD Protection
  TOSHIBA PC Diagnostic Tool
  TOSHIBA Touch ED
  TOSHIBA Hotkey Utility
  TOSHIBA utility
  TOSHIBA control utility
  TOSHIBA Power Saver
  Toshiba zooming Utility

• Satellite U400: Installation of XP and change the partitions

  Hello!

  First of all, sorry for my English, it is not good, I hope you understand me!

  I have a Satellite U400, and I would like to create a partition to install XP and have a dual boot with Vista.

  My first question is:
  I have seen that it is possible to download all the drivers xp... but they are the only upgrade, or in the book there is not driver for Xp in default?
  I need to install any drivers? And when I install it?
  Immediately after the first installation of XP?

  The second question is: I tried to resize the Vista partition, but Vista says it's impossible resize as much as I want to, because of file sharing and the snapshot.
  Can you help me solve this problem too?

  Thank you for your support!

  Bye!

  As to the question;

  (* 1) * first of all, you should check what model number you have. Driver Toshiba page provide XP drivers for 4 different U400 series.
  XP drivers that are released in the page are the most recent versions and if you want to use all the features of the laptop all the XP drivers must be installed after the installation of XP operating system.

  But before you try to install XP, you must include the SATA driver in XP. The SATA drivers are located in the Intel storage Manger.
  Please also check this forum for more information how to include the driver SATA in XP operating system.

  (* 2) * I guess you cannot shrink the partition because Vista needs a part on the partition for paging.
  It is an OS feature that allows you to use the HDD as RAM temporal.

  Please visit this 3rd party for more details:
  http://www.howtogeek.com/HOWTO/Windows-Vista/Understanding-Windows-Vista-paging-file-size/

  In your case, I would leave a few more space on the partition to make sure that this feature might work properly.

  Welcome them

• Equium U400-145 - HARD drive not detected during XP installation

  I am trying to install XP on a new HDD on my Equim U400-145.

  However, during the installation of XP it says that the installation program "found no hard drives installed on your computer.

  The HARD drive is seen in BIOS and I checked in another system, and it works fine.

  Anyone can shed some light?

  Before installing Windows XP, you need the Intel Storage Manager. All other drivers and tools, you need only after installation.

  I think that you should only read hundreds of discussions here in the forum and check this Toshiba of the area of the FAQ document:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Good luck!

• Satellite U400 - Windows update asking for Works 8 installation disc

  Hello

  Among the updates for my Windows Vista asks for the Microsoft Works 8 disc, but I don't have it because Vista was already installed when this Satellite U400 has been purchased.

  How can I fix?

  Concerning
  JS

  Hello

  I looked on the MS page because this seems to be a common problem for all users who have purchased a laptop computer with a preinstalled works 8.
  My brother had the same problem and it has solved this problem by using this patch:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=458985c3-9c6f-4049-81cd-0d0389c81f11&displaylang=en

  Check it out. I hope this will help you!

• Satellite U400 and Vista - Apple iTunes installed error message

  The Toshiba Satellite U400-157 equipped of Windows Vista is running in many errors.

  The last instance during the installation of the software Apple itunes 10.5. On an initial installation with the 10.4.1.10 present. He gave the itunes error has an invalid signature, it will not be installed. After you uninstall the itunes 10.4.1.10 and trying to install version 10.5, it gives instant error attached messages.

  Can someone please suggest what I might be able to do with vista. I need to upgrade to windows 7, this will help. I don't want to see a message that it will not install Windows 7 after having paid for it online.

  > Please refer to help and Support for more information...
  In the window title is iTunes and Toshiba doesn't support this request so I'm afraid, you're on the wrong here m support page.

  What do you think? Maybe you should contact Apple support. They have the best experience with own product.