Save eps with specific name using Applescript

Similar Questions

• How to export PNGS with 300 res using Applescript

  How to export PNGS with 300 res in Applescript

  I want to copy an art and paste in the new document and export in PNG to the location on the desktop & file name should be my previous doc were I copy file form. and the saved file must be filename_PNG.png

  the value ((path to desktop) saveLocation as string)

  Tell application "Adobe Illustrator"

  If not then turn on

  If (County documents) > 0 then

  the selection from the active document selectedItems value

  If selectedItems is not {}, then

  copy

  the active document color space the color value

  do the new document with properties {color space: color space}

  dough

  end if

  end if

  tell the end

  Tell application "Adobe Illustrator"

  tell document 1

  the value visible limits SelectedArt

  the rectangle value Board chart of the artboard 1 SelectedArt

  export the current document for the file newFilePath as PNG8 ¬

  with options {class: PNG8 export options ¬}

  , color County: 64 ¬, ¬ reduction: web color

  , ¬ dither dither: color model

  , prevaricate for cent: €50

  {interlaced: true}

  close the document assets registration No.

  tell the end

  tell the end

  You will need to set the 416,67% (both horizontal and vertical) scale. Default export at 100% will give you a 72 dpi PNG.

• How to remove characters from a file name using applescript

  Hello

  I use an AppleScript to write files from an application.

  The files are written as JPEG and PDF files

  I want to omit parts of the name of the JPEG file

  Name of the file looks like this, 70618_MEN_327926_2200x3480_1.jpg

  I need to be renamed on output, 327926_1

  That is to say, delete all characters to the end of the second line of underscores, so all characters after the third underscore and leave all the characters after the fourth underscore character.

  Hello

  You can use a Manager, like this (Manager contains explanations):

  ------------------------

  tNom set to "70618_MEN_327926_2200x3480_1.jpg".

  Set newName to my getChars (tName)

  -the result is "327926_1.jpg".

  on getChars (t)

  value {oTid, point text delimiters} {text item delimiters, '_'}

  the entire at t text elements - divide the text using the line underscore as separator, the result is a list of items

  If (count l) > 4 then - at least 4 characters to underscores

  the charsAfter4_ value to (points 5 thru - 1 l) in the form of text - the text after the fourth underscore

  the value charsBetween2_3_ in section l 3 - the text between the second and the third underscores

  the value t charsBetween2_3_ & "_" & charsAfter4_ - concatenate two strings

  end if

  set the text of the delimiters to oTid - reset point of text delimiters

  return t

  getChars end

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• Save pictures png with different names...

  Hello guys,.

  I'm not so familiar with Labview and I want help. I have a Vi which is actually control 32 RBG lights. We use the DMX Protocol... to each time a directed is on and then we take a picture, then the led goes out. The second goes on then end and on... We have 8leds in 4corners... So, we corner1_led1, corner1_led2 up to corner4_led8. Ultimately, we are 32 saves png pictures. What I want is to record photos with different names and numbers starting from 1 instead of 0... For example, if we choose the white light and save the images in 'News' images will be named 'new_white_0_0' instead of 'new_white_1_1 '. You have an idea how I can change it?

  Attached the names of current photos and Vi.

  Any comments would be useful.

  Thank you.

  The terminal of indexing ([i] in the loop for) starts at 0. When you create your file name, use the primitive "to increment" digital palette. Then your file names will start at 1 instead of 0.

  I noticed your VI that you do a lot of string concatenation to build the path/name of the file, you can use the format string and build the screw to make the somewhat simpler schema. You can also update the deprecated functions (for example, the file open) with modern equivalents.

• New virtual machine for the model with the specific name

  Hello

  I'm trying to add some model VM to VAPP using recomposeVApp (...). And it works well except that I can not change the name of the virtual machine while recomposing. It takes the name of the model. But how to add VMS to model with the specific name? I use the v1.0 API.

  This is my code:

  ReferenceType vmTemplateRef = new ReferenceType();
  vmTemplateRef.setName ("MyNewVM"); This name is ignored. The name of the model is taken!
  vmTemplateRef.setHref (vmRef.getHref ()); reference to the model
  
  CompositionItemParamType vmItem = new CompositionItemParamType();
  vmItem.setSource (vmTemplateRef);
  
  create the type params VAPP recompose.
  RecomposeVAppParamsType recomposeVAppParamsType = new RecomposeVAppParamsType();
  recomposeVAppParamsType.setName (vAppRef.getName ()); The name of vApp. It is ok.

  added the element of the virtual machine.
  The newItems < CompositionItemParamType > recomposeVAppParamsType = list
  . getItem().
  newItems.add (vmItem);

  Task task = vapp.recomposeVapp (recomposeVAppParamsType);

  Thank you

  Hello

  For after this code fragment:

  vmTemplateRef.setName ("MyNewVM"); This name is ignored. The name of the model is taken!

  The model name is ignored because vmTemplateRef is the only reference to the object that will be used for the operation of recomposition. If changing the name it will be always ignored.

  I think that changing the name of the virtual machine template for recompose cannot be done as follows:

  (1) operation recomposeVApp().

  (2) get the recomposed VAPP

  (3) download the children-> VM you want to change.

  (4) change the name of the virtual computer.

  I hope this helps!

• How to obtain the list of virtual machines in a cluster with the specific name

  Get-Cluster "Group 1" | Get - VM | where {$_.name - eq "owp *"} | Select name

  I've tried to filter the virtual machines with a specific name of a cluster by using a single command line but I am not going do anything...?

  I get results if I just Get-Cluster "Cluster 1' | Get - VM, but I want excluded other virtual machines to help to be enjoyed.

  Use - as instead of-eq

  Get-Cluster 'Cluster 1' | Get-VM | where {$_.name -like "owp*"} | select name
  

• On facebook I can't watch my friends with the name of Tracey I can using my phone app I can with Chrome etc but not on my PC Tower firfox

  On facebook I can't watch my friends with Tracey name I can use my phone app I can with Chrome etc but not using Firefox on my PC Tower

  Hello

  To better help you with your question, please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• How to use windows search to search the contents of a bunch of files with random names / extensions?

  How to use windows search to search the contents of a bunch of files with random names / extensions? Plain txt files say 1,000 with random name of file extensions?

  You can always search within those, but you need to add extensions to the file system so that it knows to look inside these files.  You said that you have a lot, so it's perhaps tedious.  Here's How to search within several types of files.

  One thing you could try is rather to make a copy of this file, rename all the files to the same extension (even an extension false for example something.bill) and perform your search on this band.  Just an idea.

• When the file is saved in windows 7, save the description with the name of the file by the text file

  I need to save files much but don't have time to write the file name and detailed inform instead. When I want to save the file, windows 7 displays the window requires the file name and type. But I need another box that I can describe the detailed information associated file name. This will generate the text file that detailed information with the name of the file.

  Is there a s/w or windows 7 can do that?

  It is not possible to save a file without a name. You must specify a name for the file. In addition, you can add additional information in the comments of the file area. You can open the section "Comments" by going to the properties of the file and go to the Details tab.

• The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file.

  
  I moved a listener on a host in a House different oracle. The headset works fine, but EM 12 c shows that the listener is down with the following summary:

  The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file. CORRECTIVE ACTION: To monitor this "EM listener target" with its current configuration, you must stop the process of listening running and start it using the Listener parameter file: opt/oracle/product/12.1.0.2/network/admin/listener.ora. Alternatively, you can update "this target LISTENER. Location ORA setting"with the location of the listener running, which started using the: opt/oracle/product/11.2.0.3/network/admin/listener.ora.

  EM 11 g, I simply changed the configuration of the listener for the different oracle home, argued the change and in a few minutes the listener would show that 'UP' with the oracle of new home. I upgraded to MS 12 c (12.1.0.4) and can't find how to do this. Can someone give me the procedure.

  Thank you

  Ron

  Hi Ron,

  Can you please do the following?

  -Create a for the listener listener.ora file, stop and start the receiver using the listener.ora file. If the file is located in a default location, set the TNS_ADMIN environment variable to that location before you start the listener.

  -Log on to the EM console, go to the homepage of the listener.

  -In the Oracle Listener menu, select target Configuration > Configuration of the analysis.

  -Ensure that the parameters, including the Listener.ora directory, are properly.

  Kind regards

  -Loc

• Get - VM: with "xyz" name VM is not found using the specified filters.

  Hello everyone!
  
  I have a script that reads a CSV with multiple host names, to connect to vCenter and should get the name of host, ip and PortGroup information to generate an external file of CSV.
  It happens that several cases vm does not exist in vCenter and returns me the below error:

  Get - vm: 04/07/2016-14:41:58

  Get - VM

  VM with the name "pxl1sso00008" was not found using the specified filters.

  No caractere:31 of C:\Users\f3135606\Desktop\vmTeste1.ps1:25

  + foreach ($vmName in $vmList) {get - vm $vmName |} Select Name, @{N = "Network"; e = {$_...}}

  +	~~~~~~~~~~~~~~
  	+ CategoryInfo	: ObjectNotFound: (:)) [Get - VM], VimException)
  	+ FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimAutomation.ViCore.Cmdlets.Commands.GetVM

  
  

  
  How would I do to get the information from an input file, see the vCenter and if this positive results write the file, ignoring errors. Ideally, if not to find the machine, simply create a line in the output file with only the hostname with the rest in white.
  
  Follow the .ps1 file:

  
  

  
  

  $vmlist = Get-Content C:\vmnames.csv
  
  if (!(Get-PSSnapin -Name VMware.VimAutomation.Core -ErrorAction SilentlyContinue))
  {
  Add-PSSnapin VMware*
  Set-PowerCLIConfiguration -DisplayDeprecationWarnings $false -DefaultVIServerMode multiple -InvalidCertificateAction Ignore -Scope Session -ProxyPolicy NoProxy -Confirm:$false | Out-Null  
  [void](Get-PSSnapin VMWare.VimAutomation.Core -ErrorVariable getVmwareSnapinErr 2> $null)
  if ($getVmwareSnapinErr.Count -gt 0) {    Add-PSSnapin VMware.VimAutomation.Core }
  }
      
  $VCconn = Connect-VIServer $vCenter -User $vUsuario -Password $vPass > $null
       
  foreach ($vmName in $vmList) {get-vm $vmName| Select Name, @{N="Network"; e={ $_ | get-networkadapter|Select-Object @{N="Network";E={$_.NetworkName}}} }, @{N="IP Address";E={@($_.guest.IPAddress[0])}}|Export-Csv –path c:\scripts\vlans.csv –NoTypeInformation}
  

  Laurent,

  See below... should get what you want... If the virtual machine is not found that it only allows to correct the virtual computer name in the output.

  $vmlist = Get-Content C:\vmnames.csv  
  
  if (!(Get-PSSnapin -Name VMware.VimAutomation.Core -ErrorAction SilentlyContinue))  {
      Add-PSSnapin VMware*
      Set-PowerCLIConfiguration -DisplayDeprecationWarnings $false -DefaultVIServerMode multiple -InvalidCertificateAction Ignore -Scope Session -ProxyPolicy NoProxy -Confirm:$false | Out-Null
      [void](Get-PSSnapin VMWare.VimAutomation.Core -ErrorVariable getVmwareSnapinErr 2> $null)
      if ($getVmwareSnapinErr.Count -gt 0) {
          Add-PSSnapin VMware.VimAutomation.Core
      }
  }
  
  $VCconn = Connect-VIServer $vCenter -User $vUsuario -Password $vPass > $null
  $arrVMInfo = @()
  
  foreach ($vmName in $vmList) {
      $vm = get-vm $vmName -ErrorAction SilentlyContinue -ErrorVariable VMError | Select Name, @{N="Network";E={ $_ | get-networkadapter | Select-Object @{N="Network";E={$_.NetworkName}}} }, @{N="IPAddress";E={@($_.guest.IPAddress[0])}}
      if ($vm -eq $null) {
          $arrVMInfo += New-Object PSObject -Property @{ `
              Name=$vmName `
          }
      }
      else {
          $arrVMInfo += New-Object PSObject -Property @{ `
              "Name"=$vm.name; `
              "Network"=$vm.Network.Network; `
              "IP Address"=$vm.IPAddress `
          }
      }
  }
  $arrVMInfo | Select Name, Network, "IP Address" | Export-Csv "c:\scripts\vlans.csv" -NoTypeInformation
  

• After I open a document using Adobe reader DC and want to save it with the help of Save as when I try to open this operation all I get is an empty windo saying save as. This problem just started, note I'm on Windows 7 Prof

  After I open a document using Adobe reader DC and want to save it with the help of Save as when I try to open this operation all I get is an empty windo saying save as. This problem just started, note I'm on Windows 7 Prof

  Hi sgodwin2468,

  Make sure that Acrobat Reader DC is updated Release Notes | Adobe Acrobat, Reader.

  If the problem persists, try the solution below.

  The default "save under" Acrobat/Reader DC dialog box is different from the dialogue box you had in earlier versions of Acrobat/Reader, it also allows you to record in the clouds and previous locations that you saved the files. It is possible that when Acrobat/Reader tries to connect to the 'cloud', it runs into problems. You can try to disable this feature to see if this brings your backup in the back of the box: open Acrobat Preferences, then go to the "General" category and uncheck "show the online storage when you save files:

  

  Kind regards

  Nicos

• Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Try resetting the PS preferences - Preferences in Photoshop

  ~ Rohit

• How can I use applescript to move objects to a specific position on the page?

  I have a PDF file with a bunch of items of text on each page, but the margins are irregular.  I want to automate the following process:

  1. Select all the objects on the page

  2. move objects (such as a group, i.e. preserving their arrangement relative to each other) until the upper left corner of the object of most of the top-left {. 67 ", 1"} from the upper left corner of the page.

  3. go to the next page.

  4. Repeat steps.

  I work on a mac, and I see that Acrobat is scriptable using Applescript.  Is it possible to do it with this?  If there is another way to describe this process without Applescript, I'd be open to that as well.

  Thank you very much.

  Acrobat has no interface for scripts change the position of an ordinary object.