Scaling of windows on the small screen of laptop

I have a smaller laptop, and I find that the windows are too big for me to scroll down and click on 'ok' for example when they want to install the updates or accept certificates? Can you help me?

Have you tried to use a higher resolution?
R/click on the desktop and go to the screen resolution. If the resolution is not
already say (recommended) use the arrow to access resolutions and move the slider
upward. Click Apply and you should be good to go.

.

Tags: Windows

Similar Questions

  • Windows 7 run on the small screen after system configuration cenges

    Windows 7 run on the small screen after system configuration cenges

    Thanks a lot for hellpe I did the reset and the problem fixed. I'll set your methods in next time

  • The Photoshop window does not fit on my laptop screen. How do I resize for the small screen?

    The Photoshop window does not fit on my laptop screen. How do I resize for the small screen?

    Photoshop window menu > uncheck and then recheck the setting of the Application.

  • The small screen on my Satellite M size

    Hi you all, AIDS.

    About the smaller screen size, it's all the time when I use it. Now, I can increase to full size by as I said clicking on display then full screen. But when I start my laptop again after the judgment or the closure of the window I was using at the time of the window of the screen returns to the small about 1/4 inch all around.

    I just can't keep it permanently.

    Why you open a new thread on the same topic?
    Please continue the discussion here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21028

  • Liquid Z 3 How to use the small screen-receving-phone-call?

    Hello

    I would like to know how to use the small screen that appear in a case to receive a phone call.

    There are two types of screen wen we receive a phone call. I know how to use a larger. But not for the little ones. Aid for the small indicates that we have to drag the green phone symbol that I guess, but to fall on what? The manual doesn't explain it at all, it is not obvious!

    Thank you very much for your help!

    With "appellant float" activated, simply to press the Red or green button, no need to call, if the "small screen" is that of the attachment

  • After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.

    After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.  Try to understand the problem.  Can I try to reinstall? Problem is on flashing screen cannot do anything.

    Original title: Windows 10

    Hello

    Thanks for posting in the Microsoft Community.

    (1) do the Windows 10 installation process is complete?

    (2) you are able to view the Windows 10 desktop?

    You can check the help below article and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows-10/troubleshoot-screen-flickering

    If the problem persists, you can reinstall Windows 10 by downloading an ISO image file to create installation media.

    To download an ISO image see the link below:

    https://www.Microsoft.com/en-us/software-download/Windows10

    To create an Installation media check out the link below.

    http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

    It will be useful. Please get back to us with the State of the question.

    Thank you.

  • When the small screen, the left side is out of the page. It started today. I have Windows Vista.

    I have a 15 inch screen.  When I use a smaller screen, say 10 or 14 inches, the demi-pouces left does not appear.  It started today.  I have Vista. I have not had any problems for 2 years before today with this machine (HP).

    Hello

    You did changes to the computer before the show?
    Method 1
    I suggest you try the steps from the following link:

    Get the best display on your monitor
    http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

    Method 2
    If the steps above fail, I suggest you to update the drivers for the graphics card from the manufacturers Web site.

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-in/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  • Start Windows - unlock the computer screen - how to change the name that is displayed?

    I have fixed a older laptop.  It works very well.  But at the start, the old owner name appears in user name (no password required).  It is a small irritation but still...  I tried to go under control panel users and I changed administrator to my name, but it has not changed the other name at startup... ideas?  Thank you!

    Hello

    Here's how you can accomplish this:
    a. click on edit accounts in the choice of a task list box.
    b. click the account you want to change.
    c. Select the element you want to change:
    d. click on change the name to change the name that appears on the Welcome to the account screen.

    How to create and configure user accounts in Windows XP
    http://support.Microsoft.com/kb/279783

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How do you get the smaller screen I can see the theme?

    I downloaded a theme from Charlie Brown and because the Firefox screen is so large, I see only the top of the head of Charlie Brown, Snoopys.

    Assuming you're talking about a light Theme (formerly Personas), the picture above will not fully be displayed unless you have 6 to 9 toolbars displayed on the top of the browser window.

    https://addons.Mozilla.org/en-us/Firefox/themes/

    If you want to see more of this image, add empty toolbars via the function "Customize."

    https://support.Mozilla.org/en-us/KB/customize-Firefox-controls-buttons-and-toolbars

    You will need to add at least one empty space to each new toolbar, you create, or the new toolbar will not only save may not be completely empty.

  • Satellite P850 take about 4 minutes to start Windows after the Welcome screen

    Hey

    My SATELLITE P850 take some time after the Welcome screen to start windows, it was like this the first time that I get it.

    Any help or idea?

    thx a lot

    Have you changed anything in your system or maybe the HARD drive? Did you create a partition?
    4 min to complete the startup process is really long
    Have you installed an antivirus software? Maybe a Norton Antivirus?
    I got this software installed on my laptop and it took an eternity to boot the system.
    I replaced Norton Antivirus with free ware software called Avast!.
    Now the Windows starts for 30 sec

  • Mouse has made the smaller screen and there is no way to expand it. Scale icon disappeared.

    Icon at the bottom of the screen disappeared.  Words are so tiny that I can hardly see.  I went in the Customization screen and it just made the larger icons.  Email is almost impossible to read.  I'm writing this I can't read the characters.

    Hello

    Solutions possible, try to hold down the CTRL key and mouse scroll upward, it increases the size of your window, in software such as e-mail, web browsers, word doc... to name a few.

    If you right click on the desktop, click Personalize, go to display settings, and choose more high resolution or trial and error a few others.

    It seems that your graphics driver is damaged. You may need to reinstall it.

    I hope this helps. I discovered your progress and update later.

    Questions: You use Vista, XP or another operating system.

    Did you install anything before the occurrence of fault?

    Thank you

    GBB

  • After scoring in Windows 7, the entire screen goes black

    I have a Windows 7 computer with 3 user profiles.  When I connect to the computer with one of the user profiles the entire screen goes black.  If I do a control + alt + delete then I may see a blue screen even once to disconnect me but if I connect with the same profile again then the screen becomes black.

    When I connect to the computer with the other two profiles, the screen is normal and I see the desktop and fine icons.

    Any ideas how to fix the user profiles that gets a black screen after login?

    Black screen after that Cruiser connection still works

    http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/d47aece7-5e12-46EC-8d3e-e8671730a7ce

  • Sony VAIO VGN-SZ2HP/B windows 7 too small screen size

    I upgradedto windows 7, but my screen is now past.  I tried to change the resolution of the screen, but doesn't show my screelpen in size.  I can't find the relevant drivers.

    Help!

    Hello

    Contact the manufacturer and download the graphics cards updated.

    $C God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

  • Shortcut to open a program in a new window in the splash screen?

    I find it rather annoying that windows 8 refuses to open a new instance of a desktop app when I click again in the start screen.   If I for example several 'guests order', I have to go to start, right click on command prompt, click Open in a new window.   It's quite embarrassing.   I don't see that there is an option to remove this restriction.  It may be wise for the Metro style applications open 1 single instance, but it is not appropriate to impose this restriction on desktop applications.

    Can someone give me a registry hack or an option of control panel to fix this annoyance in the splash screen?
    For now, I added programs like a toolbar that is separate in the taskbar of office, so that I can open multiple instances without using the start screen.  For every reading, you can do so by right-clicking the taskbar, uncheck the lock all bars of tasks, do a right click again and click on toolbars-> new toolbar and drag on new program shortcuts.

    I find it rather annoying that windows 8 refuses to open a new instance of a desktop app when I click again in the start screen.   If I for example several 'guests order', I have to go to start, right click on command prompt, click Open in a new window.   It's quite embarrassing.   I don't see that there is an option to remove this restriction.  It may be wise for the Metro style applications open 1 single instance, but it is not appropriate to impose this restriction on desktop applications.

    Can someone give me a registry hack or an option of control panel to fix this annoyance in the splash screen?
    For now, I added programs like a toolbar that is separate in the taskbar of office, so that I can open multiple instances without using the start screen.  For every reading, you can do so by right-clicking the taskbar, uncheck the lock all bars of tasks, do a right click again and click on toolbars-> new toolbar and drag on new program shortcuts.

    Hello

    When you open an office application, an icon for this app will appear on the desktop taskbar.

    Click on icon and select application name, near the bottom and this will open a new instance of the application.

    Concerning

  • Photoshop CS6 and pulled down a window after the computer screen

    I'm on a MAC and Photoshop CS6 and pulls a window down after the computer screen. How can I get that back?

    Try to click the Green maximize button.

Maybe you are looking for

  • pushing a clip by a smidge

    Howdy, I am creating my acting reel.  So I have scenes from movies, in that I was.  I try to use only a part of the scene.  And I can sort, select the 16s I want out 45 scene.  Except, that when I try to push the cut end a little bit, I find myself a

  • PowerDVD 12 does not not after update to 8.1 windows

    My laptop came loaded with windows 8 and powerdvd 12 to control the DVD player.  After that I did a windows update 8 to 8.1, powerdvd 12 would no longer.  I've restored the system to factory setting and have been informed that the Hp support site has

  • Scripting VI: inconsistent behavior of terms [] of a wire / owner

    Suppose I have the following vi: I am looking for the wire and acquire the terminals of this thread. The result I get is twice a terminal and once a terminal control (for indicator). Like this: So, the typical process to get the wire to the node is u

  • Administrator has disabled 1 2 3

    Trojan horse attack. Cleaned with MSE. Trojan horse is entered to restore points couldnot cleaned by MSE. Backup deleted to free disk space. Rebooted PC. Click right on the task bar and found the Task Manager is gray. Run regedit.exe. No good result.

  • C:\WINDOWS\udaqicacepe.dll

    This error message appears whenever I start.  How can I solve this problem?