Scan C4180

Similar Questions

• HP all in one c4180 "unable to scan or copy.

  Using Windows 7 and my HP C4180 not scan or copy and comes up with the message "unable to scan or copy.  This "all in one" used to work on my old computers using Vista and XP but will not now work on any of them.  (Also my very old OfficeJet G85 has also stopped working with a similar message from the scanner does not).  I downloaded from online new drivers for windows 7, but I still get the same message.  I tried uninstalling and reinstalling but still not good.  Someone out there who can help please?

  Hello Chrissygee

  In general, this error is associated with failure to scan. Scanner failure is a hardware problem and the printer will need maintenance.

  I suggest all initially following the article a 'Scanner failure' message on the all-in-one control panel and you can not scan, copy or fax .

  NOTE: the last part of article (three Solution) is a function of the printer. It has some links to the HP warranty check tool and warranty options.

  If the problem persists you must call technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.
  http://www.HP.com/cgi-bin/hpsupport/index.pl

• has got HP Photosmart C4180.when I scan more than 1 page of the document, it will not save pages as 1 file

  I have HP Photosmart C4180 printer and when I scan 1 page of a document, it will save all the pages into a single file? I wonder why?

  ozzyuk,

  Thanks for the information. I would like you to go ahead and start here: how Scan: Windows 7, remember that you must have the full feature software and drivers installed and use the HP Solution Center. Once on this page, please select the way to scan with HP software and select the multi documents page.

  I hope this helps!

  Thanks again,

• Can't scan via C4180 all-in-One (using Mac OS 10.6.8)

  I've finally updated for Leopard (10.5) to Snow Leopard (10.6), and now whenever I try to scan, I get the error, "Sorry, scanner could not be initialized. (Scanner not found.) »

  I was able to scan until I upgraded to, but now I can't. I can still print and copy very well and he seems not to have been updated since Snow Leopard came out. Will there be one for me to scan, or is it a different problem?

  Hello

  May you always have the HP Scan Pro application in the Hewlett-Packard folder or have you updated the software and that the analysis of HP?

  If you still see the HP Scan Pro persists it means your software is not compatible with Snow Leopard.

  Uninstall the software by following the HP uninstaller program.

  Restart your Mac, download and install the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77264-1&cc=us&DLC=en&LC=en&OS=219&product=1141647&sw_lang=

  Finally, run the software update and try scanning using HP Scan.

  For any question try scanning without using software HP as shown below and then check for the difference:

  http://support.HP.com/us-en/document/c03583750

  Shlomi

• HP Pavilion p6780uk: my hp Photosmart C4180 all-in-one will not scan after update to Windows 10

  Not sure if Windows (32-bit or 64-bit) 10

  Welcome to the community of HP, @DavidJ70

  I came across your post about how you are unable to analyze after upgrade to Windows 10 and wanted to answer with my suggestions.

  First run Installation Wizard printer here: use of diagnosis HP for printers HP Windows tools

  After that, the feature complete driver and software must be installed for your printer on your computer. Try to scan the image. If there are problems, let me know all the details, errors, etc., and I'll do my best to help!

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  Best wishes

• HP Photosmart C4180 all-in-one: can't print or scan

  When I want to print or scan the message "cannot print or scan" and "Scanner failure" happens...»

  When I try to print the document will go to half way and then stops, same message arrives...

  If I want to download and print something good, the printer works!... but again if I try to scan something then it does not work...

  It happened all of a sudden, the printer and the computer have also worked well until this happened.

  I may be low on ink, two symbols like a candle flame, are at the bottom left screen, but a copy or scanning must always be possible even if faded, or...?

  Tried unplugging everything, but no luck...

  Can anyone help? Thank you..

  I am an employee of HP

  Since you said you the error message scanner failure, first try to make a copy and see if the belt scanner moves (moves the light) while copying.

  If the light does not move that it's hardware, you will need to service the printer please call hp tech support.

• HP Photosmart C4180 scan multiple pages

  I know I have an old printer/scanner, but I hope that this unit has the ability to scan multiple pages into a single document?

  OK, let me alone long enough and I know what I'm doing wrong - the issuance of options what file format printing will put several pages-I chose .pdf and it did 2 pages in a document very well.

• the scan to memory card problem

  I have a HP C4180 all-in-one printer.  Having a problem with scanning on memory card.  Gives message that the memory card is not found, although it is in the appropriate slot.

  Hello PJ65,

  Welcome to the HP Forums!

  I understand that your Photosmart C4180 is not read the memory card. I will do my best to help you! Please follow this document from HP on the memory card troubleshooting. Additionally, make sure that the printer is connected to a live wall, not a surge protector.

  If you encounter the same problem, contact HP technical support for further assistance. Click here to read: worldwide Contact HP.

  Good luck.

• HP Photosmart C4180 printer and HP Solution Center

  Bought new HP 3500 Pro tour MT series to replace the old tower HP Windows XP.  To use the HP Photosmart C4180 printer that I used with the old tower and have available HP solutions Center.   Data has been transferred from the old disk to the new HP Tower.  Then, I downloaded the printer driver and connected using the USB cable.  The printer will now print and scan but I can't find the HP Solution Center software that I used previously during scanning and photo editing.  I do not remember if I made a basic or complete installation install the driver.  If I do a basic installation and is not software for Solution Center, should I uninstall and reinstall the drivers for this function to work?  Would appreciate a step by step help to solve this problem.  Thank you very much.

  Thanks for the info about your operating system.  And no need to apologize!

  It's very strange that you do not see your printer listed in the list of programs (non - it would not be the framework of Solutions from HP Support).  This leads me to believe that your printer is not actually installed.  If that were the case, you should see something like this (note that I have more printers installed as a regular user )

  

  So you do not see your HP Photosmart C4180 listed here, then I would go and try to install the full driver.  The instructions in my previous post would be the same, but since you have Windows 7, it would be the right document to guide you through the steps.

• Windows Vista is like as if a program/driver for scan on c418 is missing

  HP C4180 all-in-one

  Windows Vista

  When I try to scan open installer of Windows says it is preparing to install, collecting required information and finally the message under the window of Scan - "the component you are trying to use is on a CD-ROM or another removable disk that is not available."

  Hello. It appears as a component of software does not work properly. It should be repairable by a reinstallation of the software. Go to Start Menu > all programs > HP > HP Photosmart C4100 > uninstall to uninstall the software. Download the latest version of the software using the link below, then run the file to start the installation.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-47462-2&cc=us&DLC=en&LC=en&OS=2093&product=1141647&sw_lang=

  Make sure you unplug the USB cable before beginning installation.

• Busy server on the scan status message

  Whenever I try to scan a picture inside my image program (Paint Shop Pro 8 and HP Photosmart C4180), I get the error "server busy" message and instruction to "switch to" the other program... but what did open my Start menu.

  What happens and how can I solve this problem?

  Hello
   
  Could you please answer this question below?
  (a) is the printer connected over the network to your computer?
  (b) not this problem occurs when scanning all types of image or only particular image files?
  (c) from when are you facing this problem?
  (d) it was working perfectly before?
  
  Also check if scanner services are running on your computer.

  Also he set to automatic if the status is defined in the manual.
   

  Please note that this problem can occur if the program or application attempts to access the server to update for the last update when scanning the images.
   
  Method 1:
  Try to disable this automatic update functionality on your computer for that particular application.
  
  Method 2:
  Try disabling the security on your computer program and check to see if that solves the problem.
  Make sure that you re - reactivate the security on your computer after program checked the issue.
  
  Method 3:
  Try to update the latest version of the driver for the device and check if it solves the problem.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=nz&product=1141647&
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Updates from HP Photosmart C4180 all-in-One Printer

  Re: updates

  How download and install HP C4180 all-in-One Windows 7, 64-bit, automatically update?

  The printer works perfectly, made copies, scans and prints.

  Problem is that half of the HP Update message appears saying that "an update is available. I want to download and install it now? "Rest of the message is missing. I want to say a choice of Yes or no. Would appreciate your advice in a few steps if possible, not too technical. Thanks in advance.

  bel88eur

  You can try to download directly from hp.com.

• calibrate the scanner c4180

  Hello

  There is a way to calibrate the colors on the HP Photosmart C4180 scanner? When I scan the black color of the original is read somehow blue o and all other colors are read with different colors.

  In the Toolbox of the printer when I hit the button for color calibration gave me an error on cannot be applied to the current configuration, but I tried different configurations without success.

  There is perhaps a procedure to calibrate the colors but only the scanner? because the printer has the correct colors.

  I searched on google for more than a week for some advice without success.

  Thanks in advance for your help.

  Thanks for the reply. Now, this indicates that the hardware of the printer is down. I would contact HP support by phone to verify your hardware options. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Please let me know if you have any questions or concerns.

  Mario

• HP C4180 stopped printing

  Hello

  I recently installed the latest drivers (AIO_CDA_NonNet_Full_Win_WW_130_140) for my HP Photosmart C4180, although the printer works like a copier and scans I can ' t feel of applications, I have Windows 7 running on a Dell XPS.

  I uninstalled the drivers and re-installed it did not help, can anyone suggest anything else I should try.

  This happens on my machine, HP Photosmart C4180, Windows 7 64 bit. I can scan and copy, but jobs sent to be printed to see room in the work queue for half a second then disappear.

  Edit: Saw another thread at http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/After-Windows-7-upgrade-Printer-is-installed-but-nothing-Prints/td-p/174825 , check it out now.

• C4180 'n' Print - Test prints of HP services public works OK

  Running a HP C4180 all-in-One on Windows 7 Home Premium 64 - Bit.

  When I first upgraded to Windows 7 Vista a few months ago, I do not download a new driver. Having recently some intermittent problems, I'v, now downloaded and installed Windows 7 driver for the device.

  Now it scans fine, but will not print from any application except the HP test utility (which prioves there is connectivity).

  The print spooler service is running OK. I ran the diagnostics for Windows trial and it does not find a problem.

  When I print from (say) Word, all indicators say that the RFSO be printed - but it's not. And there is nothing pending the printer either.

  Someone at - it ideas?

  Thank you.

  John

  London

  Uninstall and reinstall the driver and all of the HP software corrected this problem.