ScanDisk restarted several times on Windows ME

Similar Questions

• MBP is overheating and I have to restart several times per day

  Hello

  My MBP is overheating, slowing to a crawl, and I have to restart several times a day (which may or may not help the issue).

  The machine is:

  MacBook Pro (retina, 13 inches, end of 2013)

  2.4 GHz Intel Core i5

  DDR3 4 GB 1600 MHz

  No expandable RAM (which is beyond me why they would make a non-expandable machine. I discovered after I bought it).

  During the day I am running:

  Mail application (with very complete box - this might be a contributing factor? Can I archive the emails registered)

  Safari (with different tabs open, sometimes a lot sometimes just)

  Messages

  EverNote

  Chrome (with different tabs open, sometimes a lot sometimes just)

  ... and from time to time, but not always:

  Overview

  Numbers of

  I'm not game. I'm not streaming video. After a few hours of use, several times a day (often 2-4 times just one afternoon) the machine slows to a crawl and I reboot, which may or may not solve the problem of the speed and the heat.

  I ran the activity monitor utility, and there are applications that I do not sometimes recognize using 11 to 18% of CPU (bird and soangent). Anyone know what here?

  Thanks for all the ideas. I bought this MBP in June. It was the refurb decision-making, where I got all my Macs over the past ten years. It is the worse of them.

  Thank you.

  Bird and soagent are the normal processes of Apple. Bird is one of the procedures used with the synchronize documents iCloud. soagent is used in conjunction with the Messages. In normal circumstances or will require an excessive amount of time processor. If you use Messages with a Google or other account not Apple (in other words, not exclusively iCloud) poor performance could be correlated with these accounts.

  In any event 11-18% seems a bit much for me. Try to uninstall Evernote as well as all Google products. Or the other could possibly conflict with push social agent and / or document the Apple process synchronization. Google is disinterested or impossible to implement effective OS X apps.

  Try to remove all accounts non - Apple Messages, but also completely remove Google from your Mac. You can always reinstall it and Evernote once again after a repair. Your data Google and Evernote is stored on their servers. Back up your Mac in any case, as a precaution.

  Mail application (with very complete box - this might be a contributing factor? Can I archive the emails registered)

  Perhaps. "Comprehensive" is relative. Some people keep dozens or even hundreds of thousands of e-mail messages. The practical limits of some Mail are, I don't know.

  4 GB is perfectly adequate to run El Cap on a MBP of the retina. It would be premature to suspect material deficiencies, but products Google will introduce a new Mac, regardless of its configuration.

  Run Apple Hardware Test to confirm that your exhaust fan MBP works normally. Apple Hardware Test is for Macs produced before June 2013. Later Macs use Apple Diagnostics.

  Read also Mac Notebooks: Apple Support operating temperature: and learn more about your Mac - fans of Apple Support.

• I have photos crashes as soon as it is opened.  I repaired permissions and restarted several times and it still crashes.  Help.

  I got-photos crashes as soon as it is opened.  I repaired permissions and restarted several times.  Can you help me.  OSX 10.85

  Need to know a little more to help - what kind of error message you get when it crashes? Look in the Console application and select 'All Messages', and note what kind of new messages appear when you try to run iPhoto.

  Other programs have similar problems or just iPhoto?

  Good luck...

• NSS4000 needs to be restarted several times a week

  We have a NSS4000, latest firmware. Several times a week, users will be loose connectivity - only three CIFS users of windows xp. When this happens, I will try to connect via run under xp: \\ipaddress - xp says that it cannot find the device. So, so I goto web interface and restart the device. After the reboot, I come back to run in xp and type: \\ipaddress and the connection is displayed correctly. This unit has the static ip address, both network interfaces are configured as active backup and pass tests, Member of a workgroup not domain. Curious to know if anyone has any ideas what is happening with this device? Here are a few logs CIFS entries, not sure if there is something here: May 14 00:56:30 NAS1 smbd [13256]: [2008-05-14 00:56:30, 1] smbd / service.c:make_connection_snum (648) may 14 00:56:30 NAS1 smbd [13256]: ffmr1 (172.23.5.243) to connect to the service initially rdo as a user admin (uid = 0, gid = 49) (13256 pid) may 14 00:56:36 NAS1 smbd [2795] : [2008-05-14 00:56:36 1] smbd / service.c:close_cnum (836) may 14 00:56:36 NAS1 smbd [2795]: ffmr1 (172.23.5.243) closed the connection to the rdo service may 14 08:58:30 NAS1 smbd [13256]: [2008-05-14 08:58:30, 1] smbd / service.c:close_cnum (836) may 14 08:58:30 NAS1 smbd [13256]: ffmr1 (172.23.5.243) closed connection to service rdo 14 May 16:26:52 NAS1 init : ^ MStarting pid 25286, console/dev/ttyS0: ' / etcrc/init.d/rcK' on 14 May 09:27 NAS1 nmbd [2369]: [2008-05-14 09:27, 0] nmbd / nmbd.c:terminate (56) may 14 09:27 NAS1 nmbd [2369]: SIGTERM Got: down... May 14 09:27:12 NAS1 mountd [2231]: signal captured 15, non-registration and release. May 14 09:27:12 NAS1 rpc.statd [2217]: signal captured 15, non-registration and release. May 14 09:27:12 NAS1 ntpd [2202]: dispatch_imsg to hand: pipe closed May 14 09:27:12 NAS1 ntpd [2202]: ending 14 May 16:27:34 NAS1 init: ^ MStarting pid 26693, console/dev/null: ' / sbin/hwclock ' 14 May 16:27:35 NAS1 init: ^ MStarting pid 26695, console/dev/null: ' / usr/bin/killall "14 May 16:27:35 NAS1 init: ^ MStarting pid 26697, console/dev/null : ' / usr/bin/killall "May 14 09:59:12 NAS1 smbd [3088]: [2008-05-14 09:59:12, 1] smbd / service.c:make_connection_snum (648) may 14 09:59:12 NAS1 smbd [3088]: ffmr1 (172.23.5.243) to connect to the service initially rdo as a user admin (uid = 0, gid = 49) (pid 3088) 14 May 10:15:58 NAS1 smbd [3579]: [2008-05-14 10:15:58, 1] smbd / service.c:make_connection_snum (648) 14 May 10:15:58 NAS1 smbd [3579] : joe2 (172.23.5.139) to connect to the service initially rdo as a user admin (uid = 0 gid = 49) (pid 3579) 14 May 11:06:19 NAS1 smbd [3088]: [2008-05-14 11:06:19, 1] smbd / service.c:close_cnum (836) 14 May 11:06:19 NAS1 smbd [3088]: ffmr1 (172.23.5.243) closed connection to service rdo 14 May 11:08:05 NAS1 smbd [4802]: [2008-05-14 11:08:05, 1] smbd/service.c :make_connection_snum(648) may 14, 11:08:05 NAS1 smbd [4802]: ffmr1 (172.23.5.243) to connect to the service initially rdo as a user admin (uid = 0 gid = 49) (pid 4802) 14 May 12:28:45 NAS1 smbd [6696]: [2008-05-14 12:28:45, 1] smbd / service.c:make_connection_snum (648) 14 May 12:28:45 NAS1 smbd [6696]: sengine-6500500 (172.23.5.200) to connect to the indigo service initially as a user admin (uid = 0 (, gid = 49) (pid 6696) 14 May 12:30:10 NAS1 smbd [6726]: [2008-05-14 12:30:10, 1] smbd / service.c:make_connection_snum (648) 14 May 12:30:10 NAS1 smbd [6726]: sengine-6500500 (172.23.5.200) to connect to the indigo service initially as a user admin (uid = 0, gid = 49) (pid 6726) may 14, 12:30:42 NAS1 smbd [6726]: [2008-05-14 12:30:42, 0] smbd / oplock.c:request_oplock_break (1054) 14 May 12:30:42 NAS1 smbd [6726] : request_oplock_break: no answer received to break oplock MIP 6696 on port 49179 dev = fd00, inode = 83362932, file_id = 7 14 May 12:30:42 NAS1 smbd [6726]: [2008-05-14 12:30:42, 0] smbd/open.cpen_mode_check (744) 14 May 12:30:42 NAS1 smbd [6726]: open_mode_check: exlusive left by process 6696 after break oplock! For the arc/031708/PrintServicesNW.127594.set7.pdf.jlt file, dev = fd00, inode = 83362932. Removing continue... 14 May 12:30:42 NAS1 smbd [6726]: [2008-05-14 12:30:42, 0] smbd/open.cpen_mode_check (748) 14 May 12:30:42 NAS1 smbd [6726]: open_mode_check: existing process 6696 left active oplock. 14 May 12:31:16 NAS1 smbd [6779]: [2008-05-14 12:31:16, 1] smbd / service.c:make_connection_snum (648) 14 May 12:31:16 NAS1 smbd [6779]: sengine-6500500 (172.23.5.200) to connect to the indigo service initially as a user admin (uid = 0, gid = 49) (pid 6779) may 14 12:31:32 NAS1 smbd [6696]: [2008-05-14 12:31:32, 0] lib / util_sock.c:write_socket_data (430) 14 May 12:31:32 NAS1 smbd [6696] : write_socket_data: write failure. Error = connection reset by peer 14 May 12:31:32 NAS1 smbd [6696]: [2008-05-14 12:31:32, 0] lib / util_sock.c:write_socket (455) 14 May 12:31:32 NAS1 smbd [6696]: write_socket: error writing 51 bytes to socket 24: ERRNO = connection reset by peer 14 May 12:31:32 NAS1 smbd [6696]: [2008-05-14 12:31:32, 0] lib / util_sock.c:send_smb (647) 14 May 12:31:32 NAS1 smbd [6696] : Error writing 51 bytes to the client. -1. (Connection reset by peer) 14 May 12:32:17 NAS1 smbd [6726]: [2008-05-14 12:32:17, 1] smbd / service.c:close_cnum (836) 14 May 12:32:17 NAS1 smbd [6726]: sengine-6500500 (172.23.5.200) closed the connection to the indigo service 14 May 12:32:17 NAS1 smbd [6696]: [2008-05-14 12:32:17, 1] smbd / service.c:close_cnum (836) 14 May 12:32:17 NAS1 smbd [6696]: sengine-6500500 (172.23.5.200) closed the connection to the indigo service 14 May 12:32:17 NAS1 smbd [6696] : [2008-05-14 12:32:17, 0] smbd / oplock_linux.c:linux_oplock_receive_message (143) 14 May 12:32:17 NAS1 smbd [6696]: invalid file descriptor 27 in interruption of optional kernel lock! 14 May 16:35:22 NAS1 smbd [3579]: [2008-05-14 16:35:22, 1] smbd / service.c:close_cnum (836) 14 May 16:35:22 NAS1 smbd [3579]: joe2 (172.23.5.139) closed connection to service 14 rdo May 23:49:25 NAS1 init: ^ MStarting pid 13010, console/dev/ttyS0: ' / etcrc/init.d/rcK' may 14 16:49:32 NAS1 smbd [4802]: [2008-05-14 16:49:32, 1] smbd / service.c:close_cnum (836) 14 May 16:49:32 NAS1 smbd [4802] : ffmr1 (172.23.5.243) closed connection to service rdo 14 May 16:49:32 NAS1 smbd [6779]: [2008-05-14 16:49:32, 1] smbd / service.c:close_cnum (836) 14 May 16:49:32 NAS1 smbd [6779]: sengine-6500500 (172.23.5.200) closed the connection to the indigo service 14 May 16:49:34 NAS1 nmbd [2370]: [2008-05-14 16:49:34, 0] nmbd / nmbd.c:terminate (56) 14 May 16:49:34 NAS1 nmbd [2370] : SIGTERM got: down... 14 May 16:49:45 NAS1 mountd [2231]: signal captured 15, non-registration and release. 14 May 16:49:46 NAS1 rpc.statd [2217]: signal captured 15, non-registration and release. 14 May 16:49:46 NAS1 ntpd [2203]: dispatch_imsg to hand: hose closed 14 May 16:49:46 NAS1 ntpd [2203]: ending 14 May 23:50:07 NAS1 init: ^ MStarting pid 14420, console/dev/null: ' / sbin/hwclock ' 14 May 23:50:08 NAS1 init: ^ MStarting pid 14422, console/dev/null: ' / usr/bin/killall "14 May 23:50:08 NAS1 init: ^ MStarting pid 14424, console/dev/null: ' / usr/bin/killall" 14 May 17:15:54 NAS1 smbd [3233] : [2008-05-14 17:15:54, 1] smbd / service.c:make_connection_snum (648) 14 May 17:15:54 NAS1 smbd [3233]: joe2 (172.23.5.139) to connect to the service initially rdo as a user admin (uid = 0, gid = 49) (pid 3233)

  I had the same problem (no domain, no heavy traffic and weekly no reboot needed) before moving on to the latest firmware.

  After the last update I never needed to reboot the Nss4000 once again, but I use only one network interface.

  Try to unplug a Rj-45 and see if the problem goes away.

• Unable to turn off the computer, it will restart every time in Windows Vista.

  Original title: portable computer complete crash

  I am running Windows Vista Home Premium on HP Pavilion DV2208e.
  A week using Adobe Photoshop Lightroom, the screen went black and all the lights on the laptop has continued. I tried to stop the laptop by pressing the power button, but it did not work. The only way to stop the laptop was to unplug the power cord. The next morning, that I started it again, with a notice "Windows did not close properly, how you want to proceed.» I opted for "start Windows normally". It seems to work very well, with the expection that the date had re-fixed at the date where Vista was installed first of all a few years ago. Later, when I tried to stop the laptop by choosing from the menu start 'Shut down', the laptop shuts down normally, but then 2-3 seconds more later handed on himself. I tried several times and it's always the same, the way to stop it is by pressing the power button, then whenever it restarts it new note that Windows not stop correctly. Also the black screen crash turned up almost every two days.

  I tried reinstalling antivirus and did a full scan. Also used ccleaner and décliqués "Automatically restart" in the advanced system settings. But nothing seems to have worked so far.

  In computer management, I can see critical events that seem to correspond to the time when the black screen error occurred. They say the following:
  The last sleep transition was unsuccessful. This error can be caused if the system unresponsive, failed, or loss of power during the transition from sleep
  Log name: System / Source: Kernel-Power / event ID: 41 / level: criticism / user: SYSTEM / OpCode: Info / task category: no / keywords: (2)

  Help, please...

  Hello

  It seems that the problem is related to hardware. I'm offering please contact the manufacturer of the computer (Hp) for material assistance.

• My toolbar disappeared completely. I still have the back arrows on the far left, but everything else is just... gone. I tried Firefox to stop and restart several times, but nothing does not change. All toolbars are checked in the view menu.

  July 13, 2010: My Firefox toolbar has suddenly disappeared, except for the back arrows on the left side. I tried Firefox stop and start several times, but nothing has changed. All toolbars are selected in the view menu... but nothing is visible!

  See the Navigation buttons such as back, home, bookmarks and recharge are missing

• Tidal Job Scheduler restart several times

  Hi Experts,

  I would like to know the solution for the scenario below:

  I'm putting the replay of tide job this event several times. I need my work under the Parent Group, which runs from 07:00 to 19:00 rerun on an hourly basis.

  I'll put the same occurrences re-run in an hourly basis. B employment depends on the work achievement A (either normally abnormally) and a file dependency.

  During the 1st job execution and job B end successfully, but on the 2nd round; When work is stuck on waiting on dependencies that makes job B also to be stuck on waiting on dependencies.

  I could see A start-up hourly employment, but he is still waiting on Sependencies even though I could see that the file is moved to the entrance of the B post successfully.

  Help, please. Thanks in advance!

  Hi Ram,

  I think that the result would be the same, because employment B has a variable dependency AND dependency on A task. While variable dependence could be achieved, but the job has almost immediately passes completed normally expect on Addictions - it may be not enough time for job B detect this normal completion status.

  How about you, leaving falling dependence on A job and just use the variable dependence?

  When Boolean is true, then B is running.

  ARO

  The Derrick

• Error message indicates the computer needs to restart full o updated to Firefox, but has been restarted several times and won't uninstall.

  The user whose machine they exist the problem doesn't have administrator rights. Firefox 5 detected a version upgrade (version 17) while she allowed him to continue. He did not, but since then, Firefox has not worked at all. It displays an error message"your computer must be restarted to complete a previous update of Firefox. Do you want to restart now. "I managed to remove the 17 version using Windows Add/Remove Programs, but add/remove programs show an installer, icon, not a normal program icon." The machine is a HP8000 running Windows XP SP3

  Thanks for the replies folks. I solved the problem by renaming the Mozilla Firefox folder like old Mozilla Firefox, and then return to add/remove programs to remove the element that resembled an installation program. I thn restarted the PC and reinstalled Firefox 17 from scratch. It worked perfectly. The user favorites are still maintained.

• I loaded the new update for Firefox today and received a message from 'need to reboot to complete the installation'. However, even after restarting several times the update does not load and he always invites me to restart my computer.

  The update does not load, and I can't "remove" program to my computer and reload as the same (needs to restart to complete the installation) error message keeps appearing even after several reboots.

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• Windows 7 several times not start

  My windows 7 Home premium is stop loading, and I have to restart several times my Windows 7 from a hot spare. Why this happens every 2 or 3 times I spend the computeron?

  Hi Gilbert,.

  Click on the link below and see if it works.

  http://support.Microsoft.com/kb/974719?WA=wsignin1.0

  Good day!

• Light (switch) on my screen does not turn off. I have to shut my computer down several times a day to turn off the monitor.

  Light (switch) on my screen does not turn off.  So, I shut down my computer and restart several times a day, because when I put it in mode 'sleep', he wakes to the top in a few minutes and will not fall asleep.  I could put a blanket on my screen when not in use, but I'd rather find a way to make it stay asleep when I tell him.

  Light (switch) had already done once before and I was so worried that once I turned off the monitor that I would never get it new on... a bit short of money here, to buy a new monitor, but the next day, I pressed the power button with an additional downward pressure and I could so he could start working again (able to turn the market monitor).  It was about 3 weeks ago.  Now, the light stays green, unless I stop the whole computer.

  Maybe my main problem is sleep mode, which removes the screen for like 2 minutes and then he wakes up to the top and is so rude when I myself and try to sleep, I just turn off the monitor everytime I put the computer to sleep.

  Now, I can't turn off the monitor, except by turning off the computer.

  Hi JDandGinger,

  I suggest you follow the provided article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  If the problem still persists contact the manufacturer of the monitor for more help and information.

• Downloaded Windows 10. Yet, after each reboot, windows 7 restart... no windows 10?

  Original title: Windows 10

  I have a laptop with windows 7 installed. I ran a few the applet to see if the laptop is eligible. He did, and I see the windows icon 10 appearing in the task bar. I click on it to get the upgrade and windows starts the download process. Then after it is downloaded double click on the file and it seems to be the installation. This seems to go to the end and I restarted several times when asked to do so.

  Yet, after each reboot, windows 7 restart... no windows 10.

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Computer reboot several times

  Hello

  One of my friend's computer is restart several times as soon as it tries to connect to his computer... He has accidentally two anti software virus installed on his computer, and therefore, this problem exists... Please suggest me a solution...

  Pirotte

  This may seem a stupid question, but it has enough RAM on his computer?
  If he got enough RAM for opening 1 AV program to load at startup, and it has installed 2, then the computer would not have enough RAM, and it could keep just restart.

• Update for Microsoft KB2468871 defective download several times

  Update for Microsoft KB2468871 defective download several times I stop restarted several times but it will not just, there have been several other updates that have loaded, before, during and since then try in down loaded this one then I suspect that it has to do with the update itself.

  Someone at - it suggestions?

  http://support.Microsoft.com/kb/2468871

  To repair the .NET Framework 4 Client Profile or .NET Framework 4 extended etc. -.

  • Click on start/Orb and click on Control Panel.
  • Go to the program and features.
  • Locate the Microsoft.Net Framework 4 Client Profile or .NET Framework 4 extended, right-click.
  • You should have the choice to repair or uninstall/change, click it.
  • This will then give you the opportunity to fix it
  • Select the repair option.

  Try again to WU.

  If still no joy, try to download the file manually and install

• Edit in Photoshop as greyed out.rebooted several times does not properly, can someone advise?

  Creative could use, recently not able to 'Edit in Photoshop' as grayed out. I uninstalled both and restarted several times now. Still does not properly, can anyone advise?

  Hi sandy,

  Please check the image you try to change, the Images should not miss the Lightroom library.

  Please try and complete the step with a different image.

  Kind regards

  ~ Mohit