Scanner drive for errors message - Windows 8

Similar Questions

• Scanner drive for errors

  Hi all

  I had this problem Action Center tells me to scan the disk for errors. I scanned the drive C: and drive using CHKDSK A:, but he did not found anything. I don't have a clean Windows reinstall. There are still a few mistakes. I scanned again, but still no errors. So, what's the problem?

  Help, please

  Thank you.

  Just fixed the problem without having to contact Samsung.

  Here's what I did:

  1. I fixed the drive C: using Advanced SystemCare.

  2 I used the automatic Maintenance.

  Problem solved :)

  Thanks for your help :)

• Trying to backup computer, get the error message "the C: drive has errors" "Windows has detected corruption of file system on C:. You should check the drive for errors before you can restore it. »

  I'm trying to back up my computer and so I went to back up files and attempted to save DVD RW Drie (f), then recovery (E :).  Then in the form following, I clicked on next, and I get the message "the C: drive has errors" error "Windows has detected corruption of file system on C:. You should check the drive for errors before you can restore it. "I hit the" check the drive for errors and it told me that windows can't check the disk in use then I hit the schedule disk check. "  and then nothing happened.  What should I do?  How can I save my files?

  I planned it, rebooted, and nothing happened.  I have tried three times now

  Hey Ruffscicle

  read the information on how to run the check disk at the link below vista64.com

  If the first method does not work, try the other methods

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  have a Happy New Year

  Walter, the time zone traveller

• Installation of Java has wiped out everything on the computer receiver error message: "windows-delayed write filed" hard drive failure ' x 5

  I installed java and it wiped out my computer, no program, no picures, no parameters on the left? He even wiped my restore points.

  I tried to restore to the point of installation of java, but alas nothing has happened, now I get all these boxes warning "windows-delayed write filed" hard drive failure ' x 5 and also warning mean my HDD is in peril of the personal data.  This single icon left on my desk is the internet explore and internet runs very slowly, I am reluctant to sign something incase, there a virus or something.

  Please help me!

  Hi Carolinelightfoot,

  This error message occurs when the system could not read and write data to the registry file. The error indicates a problem with the registry.

  Method 1:

  You can run a Checkdisk to see if there are drive errors that can cause this problem.

  Check your hard drive for errors

  Note: When you run the disk check, there is a chance of losing the data that you can take a backup of important data before you run checkdisk.

  Method 2:

  You can also try to boot from a full version of Windows Vista installation disc and try to perform a restore of the system to WinRE (Windows Recovery Environment)

  What are the system recovery options in Windows Vista?

  Hope this information is useful.

• Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no dound I did a windows update, but no sound came through, please help me

  Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no d

  the sounds I made a windows update, but no sound came through it please please help with a link to something. Re, I did check the drive for errors and still after it again all the sounds left my laptop which is a vaio song

  Thanks for any help

  Hi, Pantha9,

  What version of Windows are you using?

  Start > right click on computer and select Manage

  Select Device Manager

  Click on the + next to sound, video and game controllers

  Right-click on the driver and select uninstall

  Restart the computer and Windows will reload the driver

  New attempt of his

  Access the site of the factory and search for driver updates

• Error message Windows XP released "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp

  Error message Windows XP Home Edition comes out "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp. I found the article exactly to what I have experienced http://support.microsoft.com/kb/821690 but as far as I know, this issue is not caused by an old HP printer. Can you give me the steps to fix this problem other that that link I mentioned. Thank you.

  Hello

  ·         You have a HP printer connected to the computer?

  If so, try the article you mentioned.

  Generic host process error message and a flashlight icon appear

  If this is not the case, check to see if this article helps you.

  Error messages when you start a Windows XP-based computer and then try to download Windows updates

• Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Hello

  ·          What is the number and the model of the computer?

  ·          What is the service pack installed?

  ·          The meadow of operating system has been installed on the computer?

  ·          Do you remember any changes made on the computer before the show?

  Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

  You can also check: Error Message: Windows could not start because of the mistake in... : http://support.microsoft.com/kb/326671

• Cannot install Windows update, the error message "" Windows update canoe currently check for updates, because the service is not running ".

  Initial version of updated title: windows

  My "Windows update" is not updated. The problem started recently and its shows the error message "Windows update canoe currently check for updates, because the service is not running. You may have to restart your computer "." I tried it with several reboots, but there still is not up to date. Kindly help.

  Hello

  Have you made changes on the computer before this problem?

  Method 1:

   

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Try the procedure described in the following article and check the status of the issue.

  http://support.Microsoft.com/kb/822798

  Restart the computer and check it please for windows update.

  Hope the above information is helpful.

• In XP randomly receive error message "Windows Explorer has encountered a problem and needs to close"

  I get the error message "Windows Explorer has encountered a problem and needs to close".
  It occurs at any moment while I'll do something on my computer.
  The signature of the error is,
  App name: explorer.exe
  App version: 6.0.2900.5512
  The mod name: unknown
  Mod Version: 0.0.0.0
  Offset: 4ec683bd

  After the error message appears and I click 'send or do not send', everything on the screen refreshes, & I have to reset some programs.

  I am unable to do a system restore to solve the problem because I have no good restore point before this problem occurs. He began to occur initially in Jan 2011 & I can't go to a restore point of return in 2010.

  Can someone please?

  * original title - I get an error message "Windows Explorer has encountered a problem and needs to close". It's a little different from the others I found the message communautaires.*

  Hi Jaaz76

  
  Method 1:

  You can perform a security analysis and check if there are viruses or malware present. Check out the link below to run the scan and check if this helps-

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Method 2:

  Also I suggest you perform a SFC scan and check. To Perform a Scan SFC -

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow

  b. type the following command and press ENTER:

  sfc/scannow

  c. a message indicating that "the system scan will start. Be patient, because the analysis may take some time

  d. If all files require a SFC replace will replace them. Hopefully though you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/310747

   

  I hope this helps.

• Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  I am currently using windows 32 bit vist

  I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

  Suggestions?

  Hello

  1. have you made changes on the computer before this problem?

  2. which antivirus app do you use?

  I suggest you try these methods and check.

  Method 1:

  Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
  Where 'C' is the drive of operating system
  c. delete the log file, and then restart the computer and check the issue.

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• After re-installing Vista: error message "Windows doesn't detect any hardware networking".

  On another thread Microsoft Answers, I was advised to do an "inplace upgrade" to Vista to solve a problem I had with the opening of Word documents.

  I followed the instructions but was unable to do the upgrade in place of Vista.

  (The 'Upgrade' option has been blocked during the installation process.  And there is no other choice available "Troubleshooting", even if the directions had mentioned that this could be an option.  There is no workaround solution mentioned about how to proceed where it upgrade when the 'upgrade' option has been blackened.)

  So, I did a clean install of Vista - after saving all my files on an external drive, of course.

  This fixed the initial problem that I ask.

  Now, however, I can't access the internet after you complete this process.  I tried via wireless and services to broadband.

  Reads the error message: "Windows doesn't detect any hardware networking."

  How do I fix this?

  Thanks in advance.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• error message "Windows cannot access the specified device, file, or the path."

  Whenever I try to open a file even my music internet explore or anything that I get an error message Windows cannot access the specified device, path or file.

  Hi nanditaberi,

  Since when are you facing this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?

  This problem may be caused by this security software on the computer, uninstall them might solve the problem.

  Example: AVG, Zone Alarm

  Important:

  O before you uninstall the security software disconnect the computer from the internet. Make sure that the windows firewall is enabled.

  Ø you may need to check with the manufacturer of security software for reinstallation and activation.

  O re - install the security software on the computer.

  Reference:

  Please read the steps provided by, Donna, dated Saturday, January 3, 2009 14:01click here for the post.

  A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message "Windows Resource Protection could not perform the requested operation" when running SFC scan.

  As suggested, I tried to run scannow to repair Windows Vista.  I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer

   
  Hi rdoran,
  You perform the steps from the administrator account?
  
  To determine which files can be repaired by the System File Checker tool, follow these steps:
  Step 1:
   
  NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
  
  For how, see the SFC analysis details in the CBS. JOURNAL:
   
  * Open an elevated command prompt.
  
  * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
   
  * Close the elevated command prompt.
  
  * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
   
  * You can safely delete the sfcdetails.txt file later if you wish.
  Reply back with the details in the log file.
  
  If it does not help to complete the scan, you can complete the steps below and check out them.
  
  You're able to boot in safe mode ?
   
  Step 2:
   
  For more information on how to log in to safe mode, see the following Microsoft article:
   
  Startup options (including safe mode)
   
  If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
   
  Reference:
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Step 3:
  
  In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error message "Windows Server 2008 R2 has stopped working correctly"

  Original title: why my Windows 7 that... "Windows Server 2008 R2 has stopped working properly"

  Hello

  I just noticed a message in my Windows 7 Action Center indicating that...

  'has stopped working properly.

  It gives a link to an article, but I don't know if it's appropriate.

  https://support.Microsoft.com/kb/2632149?WA=wsignin1.0

  I have no problems with the PC and it runs fine., although my most recent problem has been a failure with the create a system image, but which was set by performing a CHKDSK/r that solved the problem.

  Everything else is fine.

  What should I do?

  Thank you

  Adrian

  Hello Adrian,.

  Thank you for visiting Microsoft Community.

  I understand you get error message "Windows Server 2008 R2 has stopped working correctly" in your computer maintenance center. Apart from this, your computer works fine.

  This error message appears because of political use of heavy group, and the presence of SCOM, causing a deadlock condition between the processes Lsass.exe, redirect Drive Buffering Subsystem (Rdbss.sys) driver and the Winsock Kernel.

  A fix is available for this question, I suggest to run the fix in the article below and check if that solved the problem.

  A computer that is running Windows Server 2008 R2 or Windows 7 stops responding randomly

  http://support.Microsoft.com/kb/2265716

  I hope this helps. Please let us know the results. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.