Scanner MF4150 Canon not recognized after November 18/19 Windows Update

Similar Questions

• DVD player not recognized after the upgrade to windows 8

  I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

  I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

  The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

  My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

  I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

  OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

  OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

  I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

  Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

• Windows 7 reports as "Not true" after replacement drive. Windows Update does not work. Any idea?

  I got a report that my drive was in imminent danger of failure.   Bought and made a direct disc-copy of the old disk cloning.    Everything seems to work fine, but now I'm getting the pop up that says Windows is "not true."    Windows shows as active, and nothing I've tried will stop the pop-up.  Worse, Windows Update does NOT work, and without running a few updates, I'm dead in the water for the use of new devices.

  I ran MGADiag.   Here is that content.   Any help is greatly apprectiated!

  ----------------------------------------------------------------------------------------------------------

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - QCPVQ - KHRB8-RMV82
  Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
  Windows product ID: 00359-OEM-8992687-00095
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {F8417B78-D747-4A8A-9ED2-D65405A9DA4E} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005_B4D0AA8B-920-80070057

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {F8417B78-D747-4A8A-9ED2-D65405A9DA4E}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-3615725035-2700926363-1652036055Dell Inc.. Inspiron 1545 Dell Inc.. A11 20090827000000.000000 + 00070FD3607018400F804090409Central Standard Time(GMT-06:00)03DELL WN09 100100Microsoft Office Enterprise 20071264BC76978749586GW6PzcEVEDTVKeO5Ym5UUm41dBk =89388-707-0441865-6559414100Microsoft Office home and Student 20071219

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800095-02-1033-7600.0000-3312009
  Installation ID: 004293808462381663381400261494038926624675101980836995
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: RMV82
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 22/06/2015-13:55:06

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 6:22:2015 11:15
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: LgAAAAEAAQABAAIAAAABAAAAAgABAAEAeqj + MrAO2jOkW3YOKB9UbRq90qZGyg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  WN09 DELL SLIC
  SSDT PmRef CpuPm

  This may simply be caused by a bad set of drivers of technology Intel Rapid Storage Technology-

  Intel rapid storage driver installation

  try to download and install them from here - https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194

  (you want the download of iata_enu.exe)

  Once complete, please restart twice, then after another MGADiag report.

• Windows will work not day after I installed the windows updates.

  The next day, I installed the Windows updates, I turned on my laptop a short Vaio splash screen is displayed and a black screen comes up saying that "Windows couldn't start. A recent hardware or software change might be the cause. "I don't have the installation disc of Windows that it suggests to use the software is preinstalled.  The safe mode and last known good configuration and the start windows normally get Windows running.  It is simply scrolls a list of code and ends with a line crcdisk.sys, goes to a blue screen for less than a second, then goes to black screen.  All the help I could get to address this issue would be greatly appreciated.

   

  If Safe Mode doesn't work no and you don't have a Vista DVD from Microsoft, do a repair disc to do a startup repair or a system restore:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows xp sp3 does not start after the failure of windows update and restart.

  Hello

  My ADVENT 3217 pc runs windows xp sp3 does not start once a windows recently failed update and restarted. He's just in a reboot loop. The first time it happened I got an error code of c000021a. I tried pressing F8 and try to start safe mode and other options... but still nothing. I also tried to use my restore disc supplied with my pc. So far, I've only tried the non-destructive recovery to restore windows and it did not work. I don't want to lose my files that I have not saved for quite awhile.

  Can anyone help?

  Thank you

  Hello

  · The updates you have installed prior to this problem?

  You can try the steps listed in the link below: how to solve an error "STOP 0xC000021A": http://support.microsoft.com/kb/156669

• Computer won't start not in after that installation of Windows update definition Update for Windows Defender KB915597.

  My computer launches startup repair and then a system restore. How can I fix it so it it keeps not happening?

  Hello

  1. what version of Windows is installed on the computer?

  2 do the Startup Repair and full system restore?

  3. that you get an error message when starting? If Yes, what is the exact error message?

  If you use Windows 7, follow these methods. If this isn't the case, please let us know what operating system is installed on the computer.

  Method 1:

  Use the last good known Configuration option and check if you are able to boot.

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Method 2:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you have determined the problem by using a clean boot procedure, please follow step 7 of article to reset your computer to normal startup.

• Pavilion p6210t: CD/DVD HP Pavilion p6210t drive is not recognized after upgrade Windows 10

  HP Pavilion p6210t DVD/CD drive is not recognized after the upgrade to Windows.  DVD/CD material is: LightScribe16XmaxDVD + / R/RWSuperMultidrv.  I can't find an updated driver for this device, download and install. Thanks for any advice you can provide.

  Thank you for your response.  I can't find somewhere - it now despite a lot of research - I read on a very simple solution to this problem which is (was) affecting hundreds of users HP.  In essence, the solution said that the DVD drive has in fact been recognized [as evidenced by his appearance in the BIOS] but has been "identified" and how to fix this problem was to go into the DEVICE MANAGER and delete the incorrect identification reference - then restart the computer and Windows 10 would correctly identify the DVD player and correctly in the DEVICE MANAGER list.  I decided to try this simple fix before one of the more complex solutions that were offered.  The simple solutioon worked! 

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• USB printer (Canon MF4150) is not recognized. Please help. __

  USB printer (Canon MF4150) is not recognized.  Help, please.
  What I tried:
  remove the printer
  Uninstall and reinstall the printer drivers
  printer plugged into every usb port, all working with other equipment
  plugged the printer with a different usb cable.
  stop, and then turn on the printer.

  Thanks in advance.

  Hello murrcat,

  Thank you for visiting the Microsoft answers community.

  To ensure that the procedure for this particular model is followed during the installation, please take a look at this .pdf of Cannon under the install/uninstall software.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pandigital PANSCN02 scanner that is not recognized by the computer

  I have a Pandigital PANSCN02 scanner that is not recognized by the computer.  Help.
  * original title - programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs *.

  Hello

  You can see the Microsoft Windows Compatibility Center, which says that the device has no information about the compatibility in windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=Pandigital%20scanner%20PANSCN02%20&type=hardware

  I suggest trying to launch the device in Windows Compatibility Mode and check if it works. See the link below:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this helps,

• Fortunately, I have download my Canon 7 d CR2 files using Photoshop elements 11; but when I do the same thing with a Canon G7X files are not recognized.  I downloaded the latest update of Adobe for RAW files.  Advice gratefully received.

  Fortunately, I have download my Canon 7 d CR2 files using Photoshop elements 11; but when I do the same thing with a Canon G7X files are not recognized.  I downloaded the latest update of Adobe for RAW files.  Advice gratefully received.

  You need Adobe raw camera 8.7 version. Unfortunately your software is earlier than the camera. ACR 8.7 is only compatible with PSE13. But it is possible to download and install the free DNG Converter to convert your raw files to the universal Raw format files and Adobe will be open in all versions of PSE (keep your originals as backups and for use in the software of the camera factory)

  Download Windows (.exe file) click here DNG Converter 8.7

  Download Mac (.dmg file) click here DNG Converter 8.7

  You can convert an entire folder of images raw with a single click. See this quick video tutorial:

  You Tube click here for the DNG Converter tutorial

• My apple pencil does not work after the 9.3.4 update.

  My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

  < re-titled by host >

  Greetings RechargeableJam,

  Welcome to the communities of Apple Support!

  I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

  First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

  Best regards.

• computer does not start after the installation of vista updates.

  computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.

  Hello

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope that information was useful

• Two iMacs does not start after the 10.11.4 update.

  Two iMacs does not start after the 10.11.4 update.  Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd.  He then gets stuck in a loop trying to start.  Tried to reset the SMC and LANDAU.  Without success.  Started in recovery mode and ran disk utility.  Discs said OK.  Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).)  Installation is finished but still once does not start.  Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater.  Installation seems to work, but once again, the macs will not start.  Same 'unexpected launchd sigkill' error.  A mac is now back working properly with 10.11.3 the other will be shortly.  Is there a problem with the accession?  Our COMPUTER support use Munki to get updates from one day to the next.  Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.

  More information: two bricks iMacs were late 2013 models.  A 21 "and a 27.  We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.

• Satellite P855 - function keys do not work after the upgrade to Windows 10

  Function keys do not work after the upgrade to Windows 10
  I know that I need two drivers (Flash cards support utility) and (Toshiba function Key Utility), but on the page download Toshiba is not suitable for Windows 10.
  Anyone know when and if it will be available?
  Thank you

  I'm also waiting for Win10 of things and do not know with certainty how Toshiba will start with the support of Win10. I hope that will happen soon.