Scanner SCSI in Windows 7 problem

Similar Questions

• Issues all in one Scanner HP with Windows 7

  Hello. I was hoping someone could shed some light on this question...

  I have a HP all in one Office Jet L7590. This device has been connected to a desktop Dell under Windows XP SP2. This AIO worked perfectly, until recently...
  I bought a brand new HP 2000 laptop (Windows 7 Home Premium 64-bit). I installed this AIO (Officejet L7590) by connecting it to the laptop Windows 7 install the drivers.  After doing this, I realized that I'd rather have all the HP installed software, so I proceeded to the HP site and retrieved the good download and installed. HP Solution Center is active and shows my AIO printer and it's stats (ink, ect). However, my issues revolve around the SCAN function. It will not work and I get various errors. I have studied this problem and see that many people have problems scanning with Windows 7. However, I can't find my specific errors, or find a solution to my problems. Most of the fixes I found relate to machines that have upgraded from vista to 7. I have not since it is a new machine with a fresh install of 7...
  I did the following without result:
  Uninstalled all the software and drivers associated with the L7590
  Reinstalled software and drivers (downloaded from HP)
  Update software thought the HP Solutions Center
  Update Windows 7
  Downloaded and run all the tools of diagnosis HP without success (stops while checking the driver and indicates that the driver is the question)
  Applied patch that was supposed to be for the upgrade of vista (which I have to lose?)
  Also tried running the center of HP Solutions in XP Compatibility Mode
  Downloaded and installed the HP software removal tool
  Let Windows HP peripheral installation and use of Windows Fax and Scan (cannot communicate with scanner)
  HP support could not help me and concluded that it was a Windows 7 problem despite this being confirmed equipment compatible. This issue is ongoing since late June of 2012 when I first contacted HP. I was hoping that a more experienced Windows 7 expert might have a solution.
  Thank you in advance.

  If you let win install the device it will use the built in the custom of whch win7 drivers provide the same functionality as the full features of HP software.

  Using the compatibility options on a program that is fully compatible win7 will give rise to other issues, so in the compatibility options, delete this compatibility that has been set.

  Not being is not quite sure of the current state, I'd do it disconect the printer, uninstall the HP software via programs & features, then use the HP software removal tool. Check that the printer has been removed from the device and printers.

  Run disk Cleanup then clean the PC restart

  Then install the software of the full functionality of the HP site, after doing so run the option to update the HP Solutions Center.

  Then re - test the printer and use the scan, not fax scan HP & windows.

  If after you have installed the HP software the sys requires a restart and your scans/tests fail, then clean boot the PC and re - test

• Satellite A135-S4527 - Windows encountered problem & fails to load

  At startup, Windows attempts to load, but I get the message Windows encountered problem communicating with a device. Windows does not load.
  Tried all attempts for load in SafeMode etc but no luck. Tried to load the Toshiba Recovery utility but still no luck.

  Fortunately the data is saved, but I have no recovery disks.

  How can I get the recovery disc for this machine for delivery here in the United Kingdom when it is a product of the USA?
  If the recovery discs can be ordered in the United States where to order? (I have an address to the United States for delivery if necessary).

  Hello

  As far as I know here in Europe, you will not be able to recovery media order for the laptop models to the United States. If you have a person in the United States, they must contact the nearest authorized service provider and order it for you. Later they send it to you.

  If you need to address and http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Repair&sn=false check phone numbers

  Good bye

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Windows 7 - problem 'says that my laptop was inconsistent.

  Original title: Windows 7 problem.

  At this moment, I have problems with Microsoft. A message to see if my laptop was ready for Windows 7. When I tried another message came to say that my laptop was inconsistent and that I should check my internet and try again later. My internet is OK. Please help me, I'm missing out on a lot.

  Hello

  Start the computer in safe mode with network, run Windows 7 Upgrade Advisor and check the status of the issue.

  To start the computer in safe mode with network.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Please let us know if you need more assistance.

• Error Windows Update problem "don't shut down your computer updates being configured"

  OT: Windows Update problem.

  Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?

  Start here (ignore the title): http://support.microsoft.com/kb/949358

• KB2676562 error 80070490 Windows update problem

  original title: Windows Update problem

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  Have you tried everything in this article: http://support.microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  If this method does not resolve the problem, go to method 2.

  Method 2: perform a Windows repair installation

• Active window color problem - cannot change the background color

  original title: Active window color problem

  By right-clicking: Desktop, then click on: personalization / window color and appearance / settings (Advanced) appearance, Windows user can assign a background color of the active window in any application.  This is useful for those of us who don't want a stark white screen; We can assign a mild pastel tint which may be easier on the eyes for long term sessions.

  At some recent point, I lost the background color of the active window within Windows uses 'household.  I still not my background color assigned in any application I run (Word, Mail, etc.), but using Windows Explorer to navigate through my hard drive, the active window is now always the default stark white Windows.  How this change and can it be forced to adhere to the assigned active window background color?

  Hello

  Step 1: Check if the problem continues in a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-user-account

  Step 2: If the problem does not persist in a new user account, then the old profile could have been corrupted. Try the following article to fix a corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• When I try to use the Skype window having problem

  When I try to use the Skype window having problem

  Hello

  you don't say what problem?

  and if the problem only occurs when using Skype, ask the Support of Skype

  https://support.Skype.com/en/

• Windows Update problem - 0 * 80070005

  * Original title: windows update problem

  I'm not get windows updates.so I run the program update troubleshooter.in windows he showed the error of update problem as... windows 0 * 80070005 (2016_05_17_T_06_03_42P) .and this problem was not fixed. and again, I have no answer answer.pl.

  First of all

  KB3138612 would be the last for a manual installation

  The first would actually KB3145739

  Homepage for all versions,

  https://TechNet.Microsoft.com/library/security/MS16-039

  After that you manually install you KB3153199

  I would also like to before doing this,

  Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.

  4.5.2 is more consistent to have installed,

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642

• Windows Update problems 0x8024a005

  problems of updating Windows 7 every time I try to update I get error 0x8024a005 next

  OT:

  Windows Update problems

  Try the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  (The steps # 1 a, 1 b, 1 c, 1 d and 1e)

  Disable third-party firewalls.

  Also: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/win-7-updates-keep-repeating/12ecb219-c374-e011-8dfc-68b599b31bf5

  J W Stuart: http://www.pagestart.com

• Need software/drivers for HP ScanJet 5550c Scanner Series for Windows 7

  I have Windows 7, but the installation CD scanner is for Windows XP or earlier. Need me more of software or drivers? Or I can directly scan documents to my machine?

  Hello

  You should check with HP to ensure that the scanner is compatible with Windows 7 and there are drivers available for this device.

  HP technical support:

  http://welcome.HP.com/country/us/en/welcome-copy.html#support

  Concerning

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Windows 10 problems

  Windows 10 says it is ready to install, but when I click on the blue screen goes away and nothing happens.

  Hi Daniel,.

  Restart the computer and check.

  Try to run the Windows Update Troubleshooter and check.

  The problems with the installation of the updates:

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

  Problems with your upgrade to Windows 10? Get help here:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-windows_install/Windows-10-upgrade/6493e352-B300-4ec8-bb99-c8c0a3a01c1c

  Get help with Windows 10 installation and upgrade mistakes:

  http://Windows.Microsoft.com/en-us/Windows-10/upgrade-install-errors-Windows-10

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• scan SCSI in windows 8

  I have several inherited film scanners that are more productive and more efficient than the current generation. One is one Sony U100, the other a FS270 of Canon, and I also get to use a slow but excellent Kodak machine. Are all SCSI devices. I hate the idea of having an older computer running Windows 2000 or XP put in place specifically for these devices.

  Is it possible to use these old scanners, SCSI on Windows 8? None of the Adaptec which are known to work cards seem to have drivers for anything even remotely modern. Apparently, USB dongles SCSI supports external SCSI drives but not film scanners.

  I have several inherited film scanners that are more productive and more efficient than the current generation. One is one Sony U100, the other a FS270 of Canon, and I also get to use a slow but excellent Kodak machine. Are all SCSI devices. I hate the idea of having an older computer running Windows 2000 or XP put in place specifically for these devices.

  Is it possible to use these old scanners, SCSI on Windows 8? None of the Adaptec which are known to work cards seem to have drivers for anything even remotely modern. Apparently, USB dongles SCSI supports external SCSI drives but not film scanners.

  Hardware support comes from the hardware manufacturer.  If you can't get things to load into a compatibility mode and you can not things in a virtual machine... then you will need to have older computers, if you wish to continue using the devices.