Scanner USB on the local pc connected to the server VM

Similar Questions

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• HP LaserJet 1200: HP LaserJet 1200 connected via USB to the PC with Windows 7 is not redirected in DRC

  Hello.

  HP LaserJet 1200 connected via USB to the PC with Windows 7 (32 bit) and works fine (latest drivers via Windows Update installed).

  But when I have connected via RDC (Remote Desktop Connection) for PC with Windows XP and try to print from this PC to LJ1200 - it is not redirected in a remote desktop session and I did not see in printers and Faxes folder.

  Other printers from PC with Win7 works fine via DRC (XPS Document Writer and PDFCreator).

  During this time when I do the same thing from another PC with Windows XP, LJ1200 (connected via USB to the PC) works very well through the DRC.

  Anyone know how to make LJ1200 to be redirected in a remote desktop session?

  Thanks in advance.

  For more information, here are 2 possible solutions:

  1. put two computers in the same workgroup and then share the printer and install from the remote computer.

  2. best solution: install on PC with Windows 7 drivers for Windows XP (PCL6) - it works very well as a redirected local printer via DRC!

• Help! I need to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting on my phone, I need to change? Help, please

  Help! I NEED to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting I need to change on my phone? Help, please

  You will need something like that and a micro USB to USB cable

  http://www.Apple.com/shop/product/MD820AM/A/lightning-to-micro-USB-adapter

• due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted. Cannot synchroni

  due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted on the USB port. Cannot synchronize.

  Hello, manoj0910.

  Please visit Apple support communities.

  Looks like you can't synchronize the pictures located on your external drive.  I need a little more information about your configuration to provide a better answer.  However, we will try to sync your photos through the section of the file through the article below.  You just need to direct iTunes to where your photos are stored on your external drive.

  If your photos are in a folder

  1. Select "Choose a folder" from the context menu.
  2. Choose the folder where you store your photos.
     
  3. Click on apply.

  You can arrange photos in subfolders to create photo albums.

  Sync photos from your computer to your device iOS through iTunes

  See you soon

• Help! Unable to connect USB with the computer!

  Hey... I use bike g 2nd GEN recently, when the options of connectivity usb came... I have disabled by error two options... And now, when I connect my phone with cable USB WHAT DO not come connectivity options to the top! And only charges the phone!
  
  I also tried the check in the phone settings... But no use... Help, please!

  Go to settings > storage > tap the icon at the top right (3 vertical points) > Connect usb to the computer, you can select the USB options.

• The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list

  I have two printers installed on my laptop, only appears.  The Epson Workforce 600 is connected via a usb cable, the other is a wireless network.  I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something.  When I select "Find a printer", it gives me a list of computer icons.

  Hello

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• USB on the laptop does not read anything that is connected to them

  USB on the computer laptop does'nt read whatever it is connected to them. For example, I plug the mouse, the light on the mouse turns on but does not move, Device Manager does not read install is not reading .What do that?  Laptop is hp athlon.

  Hello

  See the link below:
  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive:
  http://support.Microsoft.com/kb/925196
  Let us know if that helps.

• This could be the cause I have to continually reset the network adapter named local area connection?

  Hello

  I think I have to click on the network icon in the taskbar at the bottom right of the computer. To connect to the Internet, I have to reset the network adapter named "Local Area Connection" every time.  The computer can be idle for 30 minutes or more, and the adapter needs to be reset.  I have road runner cable internet and the operating system Windows Vista HP computer n about 3 years.  Have no idea?

  Thank you all for your help.

  Ryan

  Try this: configuration panel, Device Manager, expand network adapters

  Double-click your adapter LAKE, the power management tab

  Uncheck the box;   Allow the computer to turn off this device to save power, OK

• Why don't I have to reset my network adapter "Local network connection" every time before I can use the internet

  I downloaded the new Vista service pack 2 and now whenever I try to connect to internet, it won't allow me, and I have to reset my adapter "Local area connection".  I also suspect that it might be a registry error, but am not sure.

  I have a 32 gigabytes of gateway Home Premium 2008 computer.  Any help would be greatly appreciated.

  In addition, I'm not very proficient on the computer, please give as much detail as possible.

  Thank you!!!

  Bro, I think I've cracked it. Too, I have the same computer and had the same problem.

  Here's what I did:
  Computer-> gerer manage-> Device Manager-> network-> NVidia-> power management card, then uncheck all the boxes.
  I think that when the computer went to sleep, he turned off the adapter, and when the computer is awake, the adapter remained sleep... just a hypothesis.
  Anyway, since I made the change, I had no problem.
  Good luck!
  Vking

• Can I reset all the settings on the parameters of local internet connections?

  I have something connected on my commputer and it changes a lot of adjustment under local internet connections. I was wondering I could just reset everything.

  • Vista Windows

  Hi mickquig,

  Yes, you can accomplish this by resetting TCP/IP (Transmission Control Protocol / internet protocol), to do so; Just run the fixit available in the link below:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to set up a local administrator account with elevated privileges, but without the rights of local access connection

  I want workstation installation a Windows 7 where regular users only have power user rights, because I do not want that they either accidentally change important settings or for malicious to be processes able to run Web sites. However that these will be remote users there maybe times when they need a local administrator account to allow them to perform installation, correction or updating. So, I created a local user account, added to the Administrators group and used the Panel of local security policy and the account added to the list "Deny log on locally '.

  It works by refusing the admin account to connect directly. However when I log in under the power user account and run something that requires elevated privileges the admin account is refused to carry out the process.

  What is the combination of security settings can I refuse a desktop session Admin account but allows it to be used for processes requiring elevated privileges?

  Thank you!

  Hello

  Thank you for contacting Microsoft Community.
  This is quite normal. When you refuse the privileges of local access connection, local users can not use the administrator account information because it is be the local login. So, it is better to create a domain and restrict the use of administrative operations to the administrator.

• Cannot connect the usb on the UBUNTU 14 client storage

  Good evening. is a little of temp I of understand how connect one usb key for my customer VMware - view -client.
  I searched on the internet but there is a lot of information and I could not even understand how I can fix this.
  I attach the log file to riga76 tells me () May 13, 17:05:46.795: vmware - 6025 | view.bin ( CdkViewUsb_Init: () vmware- view -usbd is running?)
  What does this mean?

  Hello

  Thank you for your answer, but I managed to solve the problem.

  I downloaded a package on the HP site where the inside was the installation of the orizone view. I unpacked the. Deb and I have copied the file vmware-view-usb in the path-usr-bin of my installation directory. I drew the 4775 permissions and you are done.

• USB stick connected to the server VMWare Esx4i, but unrecognized

  Hello

  I have a file of virtual server on a USB drive. I just installed VMWare Esx4i on a HP Server. When I attach the USB key on the server, I am not able to see the drive.

  I wanted to transfer the virtual server from the USB key file to local storage on the HP Server?

  How can I do this?

  Thank you

  You can use the free VMware Converter.   You start, select Import and find VMX file on your PC.  The wizard will guide you through the rest of the process.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.