Scenario in which the Conversation ID will not get generated

Similar Questions

• 2nd computer on the wireless network will not get on the internet

  my computer is xp my 2nd computer is vista through the wireless receiver dlink615 and dlink. is on the network but will not go to any willing internet change workgroups the same two as said is on network and said to the internet, but where to go to get on it turns at the local level only

  Hello

  Please make sure that your services are working very well and started, has not stopped.
  1 wireless zero configuration
  2 Server
  3 workstation
  4 Netlogon
  You can find these services, start > run > type services.msc then, a window will open, check for these services if they are running, then there should be no problem with internet.
  If all services are working correctly, then give IP addresses to your PC manually according to the parameters provided by your ISP or registration of your ADSL modem.
  Hope this solve your problem...
  Thank you

• Tecra M7 - after which the screen saver will not return

  Occasionally, the screen turns off according to power options, but not coming back when you press keys or the mouse is moved. The only way I can get the screen to wake-up is to transform the notebook into tablet mode and vice versa.

  This always the screen wakes up but is boring to do. This problem is only intermittent and if it has place at all this is the first time, the screen turns off after coming out of hibernation or otherwise turn on.

  Y at - it a fix for this problem?

  Thanks in advance for any help.

  Not easy to say why it happens.
  The display turns off automatically or did you put the laptop into sleep mode.
  This occurs if the laptop is in the PC mode or Tablet PC?

  If we talked about Eve so as far as I know the laptop wakes up not of mode before moving the mouse. You must press the power button.
  In addition, you can wake up a screen with the mouse only moves if the screen saver was.

  However, you said that sometimes happens.
  I put t don't know if this helps, but check the Toshiba driver page.
  Check the versions available and compare. Try to update the graphics driver

• screen of the printer C310a will not get past 'installation' when starting

  message on the printer screen says "installation."  remove usb, wait, reinsert the usb.  draw plugt power, reconnect.  Restart the computer, still get the same message.  said device drivers not present, tried to download the driver, got message driver is present...  Printer has been installed a few months ago has worked very well.  next step - printer to kill?

  Thanks for your reply.  One of those weird things on computers.  I'm disgusted, off the domputer and found something else to do, and on the next day.  Now, it works fine.

• In the trash folder will not delete

  I followed the instructions using Terminal Server in this post, but I have a folder in the trash that will not clear.

  Any other suggestions? I think the record was something I deleted under the statement, when I was unable to install and update a few months ago. The folder was automatically replaced by Mac OS X then is no longer necessary, but was obviously once a system file it does not permanently delete.

  It's driving me crazy having to jump whenever I just quickly want to empty the trash... How can I get rid of the * thing?

  Check if the installation folder is still mount in the Finder. If it is to click on the little pointing up arrow to disassemble to see which releases it should be deleted.

• The volume control will not remain on the taskbar, XP

  The volume control will not remain on the taskbar, I open the control panel and sound to restore everytime I restart the computer. How to restore the registry file which told him to stay?

  Thank you, Larry.

  I found the Microsoft FixIt program and ran that she and that solved the same problem you described.

  Thank you very much!!!

  Ross

• The print queue will not empty the first task he accepts to print.

  I have a PC with XP operating system and a HP Officejet 6500 E709a.

  On there are 5 or 6 days, I had a set of updates to Microsoft for various things, which, as usual, has been installed.

  Since the printer has stopped catalogue mid and holding the paper for about 3 minutes before he spits unfinished.

  The job remains in the queue and will not itself should be deleted, so I can not print anything else.

  If I reboot I get sometimes to print a page, but this work is still in the queue until I restart.

  I uninstalled the software and reinstalled the software from the HP using (OJ6500vE709_Full_14.exe) website.

  I still have the same problem

  Help!

  concerning

  Roger

  Any chance to test the printer USB option?

• My phone fell, and I can not get Windows to start. The repair option will not work.

  Windows Vista restore

  My phone fell, and I can not get Windows to start.  The repair option will not work. I tried to use an upgrade disc, but the 'upgrade' function has been disabled. It says I have to do it from the office, to which I can not access. The repair disk feature did not work either. Is it possible to restore the system without losing my files?

  Have you had your laptop, checked by a technician?

  If you use a 32 bit Vista copy then any upgrade must be run from the Vista desktop.

• All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.

  All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.  I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". ""  It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My dvd drive opens at the beginning and will not be closed.

  My dvd drive opens at the beginning and will not be closed. How can I solve this problem?

  Hi Showme66,

  A. from when what happens?

  B. what happens when you try to close the drive?

  C. recent changes made on the computer?

  D. the DVD drive opens automatically at startup?

  This problem may occur if one of the following scenarios is true:

  • Drivers filter in the CD and the DVD storage stack are not migrated successfully to Windows Vista.
  • You have uninstalled the CD software that fails to withdraw properly in the registry.
  • You have installed software that adds filter drivers in the CD and the storage stack of DVDs that interfere with existing filters.

  To resolve this issue automatically, click the fix this problem link. Then, click run now button from the Automated Troubleshooting Services page and follow the steps in this wizard.

  http://support.Microsoft.com/kb/929461

  Please post back the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] Marking a post as answer, or relatively useful, you help others find the answer faster

• I open a powerpoint file to edit it, then save it again in the same folder. Then I close the application. Now the Explorer window will not respond.

  Original title:

  I have a folder on my desktop and added 5 PPTX files.  I open the folder so I can see all the files, double-click on one to change, and then save it again in the same folder.  Then I close the Powerpoint application.  Now the Explorer window of window (which I opened before) will not respond.  It clicks when I click it.  I can't close or access any of the files inside.  Any ideas?  My computer still respond as usual.

  64 bit OS

  Hello

  You did changes to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

  Method 2:

  Refer to this link.

  Error: Windows Explorer has stopped working

  Note: Please skip the step that offers to perform a upgrade in Place, for now.

  Method 3:

  Change the location of the folder and check.

• How can I reload CS5 when the installer disc will not initialize?

  Have the original disc of CS5. Deleted Adobe Audition to my PC when I had a problem

  find a file I had just recorded. In the past, reinstall went out the hiccups and everything was fine.

  Now, despite repeated attempts, the installation program will not initialize... He's here. Tried the

  Download softward useful... but nothing there has no effect.

  He has created a number I'm supposed to hang on to: 40-57766-210312062013 for

  whatever it is interesting (less?). Arrrrgggh!

  If you follow the 7 steps you can dl a free trial here: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  and activate it with your serial number.

  If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

• With instant full VM LUN and now the virtual machine will not start or register

  Hello

  I have a case here, where we have a virtual machine that quickly filled the logic unit number and the snapshot is currently 110 GB. It is now available on the new LUN space, but the VM does not start and he was also addressed as 'unknown' in the viclient. I tried to cancel the registration and check-in again, but he refuses to register. It seems that the snapshot is damaged.

  When you try to save it, I get the following in hostd.log:

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': (17) successfully opened size = 48348147712, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': open with success (21) size = 48348147712, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': (17) successfully opened size = 214764819456, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': open with success (21) size = 214764819456, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': closed.

  DISKLIB-LINK: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-STRING: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-LIB: unable to open ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ' with flags 0 x 11 (the specified file is not a virtual disk).

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': (17) successfully opened size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': open with success (21) size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': (17) successfully opened size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': open with success (21) size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': closed.

  DISKLIB-LINK: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-STRING: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-LIB: unable to open ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ' with flags 0 x 11 (the specified file is not a virtual disk).

  Referred to as registry: AXAPTA/AXAPTA.vmx

  Vmsvc indicates file is loaded, by: /vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA.vmx

  I also tried to copy virtual machines directory down to a local PC and run via VMware Converter, but I get the message "the source VMware Consolidated Backup"filename.vmx"has a missing catalog file.

  1. VMware - v

  VMware ESX Server 3.5.0 build-130756

  Any help is appreciated.

  Lars

  The problem (according to the newspaper) is AXAPTA_1-000001 - delta.vmdk no AXAPTA_1-000002 - delta.vmdk (the error on the second snapshot is probably because of the broken parent snapshot).

  The descriptors are ok, which means that the VMDK itself is broken.

  If you do not have a backup, you can try the following:

  -Copy the files in another data store

  -change the second snapshot descriptor to point to the basedisk as the parent

  -Try and mount the drive

  -If you're lucky, you should be able to recover at least some data of

  -If the disklib is complaining again then the two snapshots are broken - which is unlikely

  Depending on how old the second snapshot (the older one is better it is) the method above will not help.

• The page content will not be displayed in IE 7 &amp; 8

  I'm going to understand problems why content after the Spry Menu will not display in IE 8, and the page appears at all in IE 7. Seems

  http://nowagenewmedia.com/Organica/

  CSS

  * {
  vertical-align: baseline;
  Police-weight: inherit;
  do-family: inherit;
  font style: inherit;
  do-size: 100%;
  border: 0 none;
  outline: 0;
  padding: 0;
  margin: 0;
  }
  {#outerWrapper}
  Width: 960px;
  margin-top: 10px;
  margin-right: auto;
  left margin: auto;
  border: 3px solid #CCC;
  }
  {#contentWrapper}
  Width: 100%;
  overflow: auto;
  Clear: both;
  }
  #header {}
  Width: 960px;
  height: 160px;
  }
  #sidebar {}
  float: left;
  Width: 225px;
  height: 400px;
  background-color: #FFF;
  border-left-width: 1px;
  border-left-style: solid;
  border-left-color: #CCC;
  }
  #content {}
  float: left;
  Width: 734px;
  background-color: #FFF;
  }
  {#navbar}
  float: left;
  height: 35px;
  Width: 960px;
  Clear: both;
  }

  Page

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  " < html xmlns =" http://www.w3.org/1999/xhtml ">
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"
  < title > Untitled Document < /title >
  < link hand. CSS"rel ="stylesheet"type =" text/css"/ >
  "< link href="Spry-UI-1.7/css/Menu/basic/SpryMenuBasic.css "rel ="stylesheet"type =" text/css"/ >
  "< script src="Spry-UI-1.7/includes/SpryDOMUtils.js "type =" text/javascript"> < / script >
  "< script src="Spry-UI-1.7/includes/SpryDOMEffects.js "type =" text/javascript"> < / script >
  "< script src="Spry-UI-1.7/includes/SpryWidget.js "type =" text/javascript"> < / script >
  "< script src="Spry-UI-1.7/includes/SpryMenu.js "type =" text/javascript"> < / script >
  "< script src="Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarKeyNavigationPlugin.js "type =" text/javascript"> < / script >
  "< script src="Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarIEWorkaroundsPlugin.js "type =" text/javascript"> < / script >
  < style type = "text/css" >
  / * BeginOAWidget_Instance_2141544: #MenuBar * /.
  / * Values for skinning a basic through presets menu. If the default settings are not sufficient, most count should be done in
  These rules, except for the images used to down or to the right pointing arrows, located in the SpryMenuBasic.css file
  
  They take the following classes of widget for layout of menu (located in a "Preset")
  . MenuBar - applies to all menu bars - default is a horizontal bar, all submenus are vertical - level 2 subs and beyond are drop down to the right.
  . MenuBarVertical - vertical main bar; All submenus are drop down to the right.
  
  You can also pass in extra classnames to set your desired top-level menu bar layout. Normally, they are defined by using a predefined setting.
  They apply only to the horizontal menu bars:
  MenuBarLeftShrink - the menu bar will be horizontally "shrinkwrapped" be just big enough to hold his items and left-aligned
  MenuBarRightShrink - as MenuBarLeftShrink, but right-aligned
  MenuBarFixedLeft - set to a specified width defined in rule "." MenuBarFixedLeft', and left-aligned.
  MenuBarFixedCentered - Fixed to a specified width defined in rule "." MenuBarFixedCentered',.
  and centered in its parent container.
  MenuBarFullwidth - expands to fill the width of the parent container.
  
  In general, all the rules specified in this file are prefixed by #MenuBar so that they don't apply to instances of the widget inserted along
  with the rules. This allows use of multiple MenuBarBasic widgets on the same page with different layouts. Due to limitations in IE6.
  There are a few rules where this was not possible. These rules are so noted in the comments.
  
  */

  {#MenuBar}
  background-color: #003300;
  do-family: "Lucida Sans Unicode", "Lucida Grande", without serif. / * Specify the fonts on the bar menu and submenu MenuItemContainer, so MenuItemContainer.
  MenuItem and MenuItemLabel
  at a given level all use the same definition for ems.
  Note that this means that the size is also inherited from the submenus of the child,
  so be careful when using other than relative sizes
  100% on the fonts submenu. */
  make-weight: bold;
  font size: 13px;
  make-style: normal;
  padding: 0;
  }
  / * ATTENTION: because ID + class selectors do not work correctly in IE6, but we want to restrict these rules to all this
  instance of widget, we used the concatenated string classnames to our selectors for the type of layout of the menu bar
  in this section. These have very low specificity, so be careful not to overstep accidentally. */

  . MenuBar br {/ * using only a class, so there same specificity that the "."} MenuBarFixedCentered br' rule bleow * /.
  display: none;
  }
  . {MenuBarLeftShrink}
  float: left; / * shrink the content, but also to float the menu bar * /.
  Width: auto;
  }
  . {MenuBarRightShrink}
  float: right; / * shrink the content, but also to float the menu bar * /.
  Width: auto;
  }
  . {MenuBarFixedLeft}
  float: left;
  Width: 100%;
  }
  . {MenuBarFixedCentered}
  float: none;
  Width: 100%;
  margin-left: auto;
  margin-right: auto;
  }
  . MenuBarFixedCentered br {}
  Clear: both;
  Display: block;
  }
  . MenuBarFixedCentered. Submenu br {}
  display: none;
  }
  . {MenuBarFullwidth}
  float: left;
  Width: 100%;
  }

  / * Top level bar small objects - these actually apply to all items and get substituted for the submenus level 1st or successive * /.
  #MenuBar. {MenuItemContainer}
  padding: 0px 0px 0px 0px;
  margin: 0;
  / * Zero margin on the containers of items. The MenuItem is the active area of hover.
  For most elements, we have padding top or bottom or border only on MenuItem
  or a child so we keep all tiled submenu with elements.
  Definition of this 0 avoids the "dead zones" to hover. */
  }
  #MenuBar. {}, MenuItem
  padding: 0px 10px 0px 10px;
  background-color: transparent;
  border-left: 1px solid #FFF;
  border-top-width: 0px;
  border-right-width: 0px;
  border-bottom-width: 0px;
  border-top-style: none;
  border-right-style: none;
  border-bottom-style: none;
  }
  #MenuBar. {MenuItemFirst}
  border-style: none none no none;
  }
  #MenuBar. {MenuItemLast}
  border-style: solid none none none;
  }

  #MenuBar. MenuItem. {MenuItemLabel}
  text-align: left;
  line-height: 1.4em;
  color: #ffffff;
  background-color: transparent;
  Padding: 6px 6px 15px 15px;
  Width: 10em;
  Width: auto;
  }
  . SpryIsIE6 #MenuBar. MenuItem. {MenuItemLabel}
  Width: 1em; / * Equivalent to min-width in modern browsers * /.
  }

  / * First level of submenu items * /.
  #MenuBar. Submenu. {}, MenuItem
  do-family: Arial, Helvetica, without serif.
  make-weight: bold;
  do-size: 12px;
  make-style: normal;
  background-color: transparent;
  padding: 0px 2px 0px 0px;
  border-width: 1px;
  border color: #cccccc #cccccc #cccccc #cccccc.
  / * Border styles are replaced by first and last items * /.
  border-style: solid solid no solid;
  }
  #MenuBar. Submenu. {MenuItemFirst}
  border-style: solid solid no solid;
  }
  #MenuBar. Submenu. MenuItemFirst. {MenuItemLabel}
  padding-top: 6px;
  }
  #MenuBar. Submenu. {MenuItemLast}
  border-style: solid solid solid solid;
  }
  #MenuBar. Submenu. MenuItemLast. {MenuItemLabel}
  padding-bottom: 6px;
  }
  #MenuBar. Submenu. MenuItem. {MenuItemLabel}
  text-align: left;
  line-height: 1em;
  background-color: transparent;
  color: #ffffff;
  padding: 5px 6px 6px 12px;
  Width: 7th;
  
  }

  / * Hover States for containers, objects and labels * /.
  #MenuBar. {MenuItemHover}
  background-color: transparent;
  border color: #cccccc #cccccc #cccccc #cccccc.
  }

  #MenuBar. MenuItemWithSubMenu.MenuItemHover. {MenuItemLabel}
  background-color: transparent; / * expose this propeller separately * /.
  color: #999999;
  }
  #MenuBar. MenuItemHover. {MenuItemLabel}
  background-color: transparent;
  color: #999999;
  }
  #MenuBar. Submenu. {MenuItemHover}
  background-color: #003300;
  border color: #cccccc #cccccc #cccccc #cccccc.
  }

  #MenuBar. Submenu. MenuItemHover. {MenuItemLabel}
  background-color: transparent;
  color: #999999;
  }
  / * The submenu - first-level submenus properties * /.
  #MenuBar. {SubMenuVisible}
  background-color: #003300;
  min-width: 0%;  / * This prevents the menu being lean that the parent MenuItemContainer - but not available on ie6 nice to have * /.
  border-color: #ffffff #ffffff #ffffff #ffffff.
  border-width: 0px;
  border-style: none none no none;
  }
  #MenuBar.MenuBar. SubMenuVisible {/ * menu bar horizontally for only * /}
  top: 100%;    / * 100% is at the bottom of menuItemContainer parent * /.
  left: 0px; / * "left" may need tuning according to borders or padding applied to the bar MenuItemContainer or MenuItem,.
  and your personal taste.
  0px align left drop-down list with the content of the MenuItemContainer area. Assuming you keep the margins 0
  on MenuItemContainer and on the parent MenuItem
  menu bar, which in fact equals the sum of padding-left MenuItemContainer & MenuItem align
  the drop-down menu to the left of the menu item label.*.
  z-index: 10;
  }
  #MenuBar.MenuBarVertical. {SubMenuVisible}
  Top: 0px;
  left: 100%;
  min-width: 0px; / * Do not neeed to match the width of the parent MenuItemContainer - elements will avoid total collapse * /.
  }
  / * The sous-menu--deuxieme submenu level properties and beyond - are visible to descendants. MenuLevel1 * /.
  #MenuBar. MenuLevel1. {SubMenuVisible}
  background-color: #003300;
  min-width: 0px; / * Do not neeed to match the width of the parent MenuItemContainer - elements will avoid total collapse * /.
  Top: 0px;    / * If you want, you can move this down a smidge to separate the top item "submenu s of menubar.
  It is really necessary only for the submenu on the first point of MenuLevel1, or you can make it negative to make the submenu
  vertically 'centered' about his call to * /.
  left: 100%; / * If you want to move the submenu on the left to partially cover the point of his call, you can add a margin to the left with a
  negative value to this rule. Alternatively, if you use the elements of fixed width, you can change this value on the left
  to use px or ems to get the desired offset. */
  }
  / * IE6 rules - you can remove these if you do not want to support IE6 * /.

  / * Note about several classes in IE6.
  Some rules above use several class names to an element of selection, such as "hover" (MenuItemHover) and 'a a submenu' (MenuItemWithSubMenu).
  * give the selector '. MenuItemWithSubMenu.MenuItemHover'.
  * Unfortunately, IE6 does not support using mutiple classnames in a selector for an element. For a selector like '. foo.bar.baz', IE6 does not take into account
  * all but the final classname (here, ".baz") and defines the specificity in consequence, with only one of these classs as significant. To work around this problem
  * problem, we use the plugin in SpryMenuBarIEWorkaroundsPlugin.js to generate classnames for IE6, such as "MenuItemWithSubMenuHover".
  * Given that many of these necessary, the plugin does not generate additional classes for modern browsers, and we use the copies of CSS2 style class
  * syntax for that. Since IE6, both apply the rules where the
  * It should not and gets the specificity wrong too, we have rules of order carefully, then misapplied rule in IE6 can be overridden.
  * So we put first the multiple class rule. IE6 wrongly apply this rule.  We follow this with the single class rule that it would be
  * replace by mistake, by ensuring that the specificity of IE6 interpreted as is the same as the unique class selector, so the latter wins.
  * We then create a copy of the rule of multiple class, adding a "." SpryIsIE6' in the context of the class and to ensure that the specificity
  * the selector is high enough to beat the rule of single class in the case of "match of these two classes. We place the rule of IE6 at the end of the
  * block of css styling to make it easy to remove if you want to drop support for IE6.
  * If you decide you do not need IE6 support, you can get rid of these, as well as the inclusion of the SpryMenuBarIEWorkaroundsPlugin.js script.
  * The 'SpryIsIE6' class is placed on the HTML element by the script in SpryMenuBarIEWorkaroundsPlugin.js if the browser is Internet Explorer 6. This avoids the need of IE conditional comments to these rules.
  */
  . SpryIsIE6 #MenuBar. MenuBarView. MenuItemWithSubMenuHover. MenuItemLabel / * selector IE6 * /}
  background-color: transparent; / * expose this propeller separately * /.
  color: #999999;
  }
  . SpryIsIE6 #MenuBar. MenuBarView. Submenu. MenuItemWithSubMenuHover. MenuItemLabel / * selector IE6 * /}
  background-color: transparent; / * expose this propeller separately * /.
  color: #999999;
  }
  . SpryIsIE6 #MenuBar. Submenu. Submenu / * selector IE6 * /}
  left margin:-0px; / * Offset at least part of a version of 'double upholstery' bug IE6 'double margin "* /.
  }

  
  / * EndOAWidget_Instance_2141544 * /.
  < / style >
  < script type = "text/xml" >
  <!--
  < oa:widgets >
  < oa:widget wid = binding "2141544" = "#MenuBar" / >
  < / oa:widgets >
  ->
  < /script >
  < / head >

  < body bgcolor = "#17321A" >
  < div id = "outerWrapper" >
  < div id = "header" > < img src = "media/header.jpg" width = "960" height = "160" alt = "organica title" / > < / div > "
  < div id = "navbar" >
  < ul id = "Menu bar" >
  < li > < a href = "#" > home < /a > < /li >
  < li > < a href = "#" > Organica kitchen < /a >
  < ul >
  < li > < a href = "#" > Menus < /a > < /li >
  < li > < a href = "#" > Catering < /a > < /li >
  < /ul >
  < li > < a href = "#" > Bar juice < /a > < /li >
  < li > < a href = "#" > produce < /a > < /li >
  < li > < a href = "#" > grocery store < /a > < /li >
  < li > < a href = "#" > < /a > < /li > body care
  < li > < a href = "#" > events < /a > < /li >
  < li > < a href = "#" > Contact < /a > < /li >
  < ul >
  < li > < a href = "#" > Directions < /a > < /li >
  < li > < a href = "#" > job < /a > < /li >
  < /ul >
  
  < script type = "text/javascript" >
  BeginOAWidget_Instance_2141544: #MenuBar
  var MenuBar = new Spry.Widget.MenuBar2 ("#MenuBar", {}
  widgetID: "Menu bar",
  widgetClass: 'MenuBarFullwidth the menu bar. "
  insertMenuBarBreak: true,
  mainMenuShowDelay: 100,.
  mainMenuHideDelay: 200,.
  subMenuShowDelay: 200,.
  subMenuHideDelay: 200
  });
  EndOAWidget_Instance_2141544
  < /script >
  < / div >
  < div id = "contentWrapper" >
  < div id = "sidebar" > < / div >
  < div id = "content" > < / div >
  < / div >
  < / div >
  < / body >
  < / html >

  You have some tags not closed in the html code. Here's what your code should look like the openingtag to the closingtag. It's a good idea to 'comment' where your

  end of tags. In the code, you will see that I did this like:
  . Some people like to put "comment" inside the closing like tag: If you move it then
  the comment goes with it.
  
   

  

  
   

  
   

  
       
  • Homepage
  
  
  • Organica food
    
    
    
    • Menus
  
  
• Restoration



• Juice bar


• Produce a


• Grocery


• Care of the body
• Events


• Contact


• Directions


• Job




       
   

   
Sidebar

   
Content

 




• How can I add a footer to the main section that will not get push off-page?

  Generator 10.1.2.2.0
  ORACLE Server Release 10.1.0.5.0
  Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64 bit Production
  
  Hi all
  
  I want to add a footer frame in the main section of a report that will not get pushed off the page by an extensible framework above it, which can develop vertically, but will still allow the extensible framework continue on the next page (and print another foot on this page as well. I paint a blank on how to do it with anchor or frameworks encompassing etc points.

  Extend the extensible framework until the footer frame. Change the elasticity vertical expandable framework to contract or fixed. In this case, pull-out frame will be printed until the foot of the page and will then continue on the next page.

  I hope this helps.