Schedule a conference recorded on MSDS

Similar Questions

• Jabber the dial in the conference on MSDS

  Hi all.

  My system has:

  • TMS
  • Conductor
  • Telepresense Server
  • CUCM

  My TMS can schedule a conference and then dial a jabber client, but jabber client cannot dial in the room.

  On MSDS, I configured the Room ID: 898 X.

  On CUCM, I configured SIP trunk on driver ground and route 898 X driver.

  Are - that no one knows why?

  What TMS version are you running?

  In TMS 14.6, they introduced an option with conductor: 'limit Ports to the number of expected Participants.  It is under the extended parameters of the driver in the TMS, make sure is disabled, or as mentioned by Michel, add a dial by attending the Conference planning.

• question re. records programmed in windows media Center

  I want to record a tv using Windows Media Center (WMC) series. I configured the tuner, WMC and took the series to record using the guide. My question is: what I must have WMC running in the background for the scheduled to start recording, or WMC itself will start at the right time? In addition, it will start my laptop? in other words, can I just turn off my cell phone (to save energy) and let and WMC invites you to my computer to start up and/or start WMC when programmed recording? Thank you!

  The laptop doesn't have to be on, but if it isn't then it must be in mode 'sleep'. If you do a full closed then media library will not be able to restart the laptop, but it can be awakened from sleep mode.

• Windows Media Center does not record the calendar.

  Planning to record a program, but sometimes lapsed time up to the point where it does not record. I am running Windows 7 Home. Yes, I checked preferences but which differs only up to 15 minutes max.  I have reinstalled twice already. Why please?

  Hello

  (1) did you make any changes before the show?

  (2) what is the brand and model of the computer?

  Windows Media Center records the first home run HD programs or any which TV tuner installed. However, you may need to follow a few rules.

  -If you turn off your computer, Windows Media Center does not have a regular program. The computer must be turned on or "standby mode" to record a television show. The computer will not automatically in standby mode if Windows Media Center is open.

  
  -Make sure that you turn off the screen and lower or turn off the sound if you have one at the request of a record in the middle of the night and don't want to be disturbed.

  -Your scheduled recording may not save in the following situation: schedule you a recording in Windows Media Center to start in less than ten minutes, close Windows Media Center and put your computer into standby or hibernation mode immediately. Use or one of the following options to save your record programmed:

  a. do not close Windows Media Center before you put your computer on standby or hibernation.
  b. after having programmed a recording, wait a minute before you put the computer in standby or hibernation.

  I would have you refer to the article below:

  Why my TV did not show record in Windows Media Center?

  http://Windows.Microsoft.com/en-in/Windows7/why-didn

  Please let us know if that helps.

• Recording in Windows media center mode 'sleep'

  Original title: record in hibernate or standby mode

  Will be windows media center recording a first HDHomeRun in "sleep" or hibernation mode?

  Hey, Logan,

  Windows Media Center records the first home run HD programs or any which TV tuner installed. However, you may need to follow a few rules.

  -If you turn off your computer, Windows Media Center does not have a regular program. The computer must be turned on or "standby mode" to record a television show. The computer will not automatically in standby mode if Windows Media Center is open.

  
  -Make sure that you turn off the screen and lower or turn off the sound if you have one at the request of a record in the middle of the night and don't want to be disturbed.

  -Your scheduled recording may not save in the following situation: schedule you a recording in Windows Media Center to start in less than ten minutes, close Windows Media Center and put your computer into standby or hibernation mode immediately. Use or one of the following options to save your record programmed:

  a. do not close Windows Media Center before you put your computer on standby or hibernation.
  b. after having programmed a recording, wait a minute before you put the computer in standby or hibernation.

  Here is a link to HP about the same:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c01896795

  Hope this helps you.

• Regular telepresence Conference

  Early how can a conference of telepresence start?  For example.  If we have scheduled a conference for telepresence for 10:00 can it be started at 09:30 (30 minutes before the scheduled start time)?

  Ankit,

  Yes, it is different in point 1.6. Check the following path: management policy > CONF_MAN > meeting beginning in a few minutes.

  JD King

• Conference MCU SIP with VCS registration question

  Hi all

  We have a cluster of MSE 8510 MCU (software version 4.5 (1.72), Build 6.19 (1.72)) with 86 active confeneces. All of them are configured in the same way, to use H.323 and SIP registrar calls control.

  The thing is, I can see all conferences recorded under H323 and some of them just registered as SIP on the VCS cluster (X.8.2.2).

  What is the problem? Why can't all register using SIP?

  See you soon,.

  Petar

  Can you check to see how many conferences are recorded using SIP?

  If it's 50, this seems to be the maximum that can be recorded, see enhancement request CSCum48651.

• URGENT NECESSARY RESPONSE: IOM facility on Jboss. Failed to start Scheduler

  I installed IOM 9.1.0.1 and improved 9.1.0.2
  
  at the start of the server of the IOM to Jboss Scheduler is not start-up. where the dashboard diagnostic is showing status 'fail' to Scheduler service.
  
  even if I m from the Jboss server directly using the run.bat file, the Scheduler is not commissioning. What could be the possible reason
  
  the version of Jboss is 4.2.3 GA
  
  the command prompt shows: could not start the Scheduler... SILServiceComponentException
  
  11:33:11, deploy 171 INFO [TomcatDeployer], ctxPath = / xlScheduler, warUrl=.../tmp
  /deploy/tmp12500XellerateFull.ear-contents/xlScheduler-exp.war/
  11:33:11, 484 INFO [WEBSTARTUP] start the Scheduler to start the server: true
  11:33:11, 500 method INFO [WEBSTARTUP] SchedulerInitServlet/initializeScheduler
  reads the data in TSA/TSK tables and initialize the Quartz Scheduler with the task and
  Details of the trigger
  11:33:11, 781 INFO [WEBSTARTUP] planning rate user Policiestask, is class
  com.thortech.xl.schedule.tasks.tcTskUsrEvaluatePolicies
  11:33:11, 921 INFO [WEBSTARTUP] planning Get SOD check results Provisioningtas
  k, class is com.thortech.xl.schedule.tasks.GetSODCheckResults
  11:33:11, 921 FATAL [WEBSTARTUP] failed to start Scheduler: oracle/iam/RCMP/grass/e
  Xception/SILServiceComponentException
  11:33:11, 921 INFO [WEBSTARTUP] closing Scheduler
  11:33:11, 937 INFO [QuartzScheduler] Scheduler DefaultQuartzScheduler_$ _NON_CLUS
  SAVED by closing.
  11:33:11, 937 INFO [QuartzScheduler] Scheduler DefaultQuartzScheduler_$ _NON_CLUS
  RECORDED pause.
  11:33:11, 937 INFO [QuartzScheduler] Scheduler DefaultQuartzScheduler_$ _NON_CLUS
  REGISTERED shutdown complete.
  11:33:11, 937 INFO [WEBSTARTUP] full stop Planner
  
  Edited by: user12240044 January 6, 2010 22:04
  
  Edited by: user12240044 January 6, 2010 22:12

  Have you tried with redeploying the xellerate.ear file?

• Unavailability TMS

  Simple question to help a client to determine the value / worth to deploy a TMS HA (either via the balancer load or active / standby)...

  What functionality would be lost in delays that TMS became unavailable for a reason any?  Suppose that all infrastructure and endpoint devices have been added to the system as managed devices, Movi/Jabber clients have been supplied, phone books have been published and distributed and conferences on demand. In other words, the system is completely configured/stable and TMS breaks down. In this period before it recovery/reconstruction:

  Y have an effect on existing managed devices, or that they would continue to function 100% with their current configurations and directories?

  -What would be the effect on the scheduled conferences? I think that this may depend on the type of conference, that "auto connect" (for example) require MSDS inaugurate the conference call from the endpoint, but this appointment perhaps or conferences BBFRR would work always as usual without TMS being available - need to confirm on this.

  Thank you!

  All types of multi-point conference will be affected by MSD downhill. This is because MSDS does not have a 'conference.create' on the MCU control until the conference will start.

  "Manual connection": the prompt for the master VC to start the Conference is sent by TMS, so you will lose this type of conference, as well as BBFRR and 'auto connect '.

  'Booking' is not route the call and book the ports and gateways, these conferences should therefore be affected by MSD become unavailable.

  Specifically, if I schedule a conference of MC, is this information down thrust to the endpoint where it is resident RAM unless there is a restart of endpoint (and therefore not affected by the failure of TMS)?

  It depends on the software version of endpoint. Information is pushed to the new endpoints of TC and TE so that they are visible in the sections 'meetings' on touchscreens, but nothing is ever being pushed to TC/TE on older software (pre 5.0, I think) or MXP, etc. Polycoms.

  I don't know why the people of endpoint chose clear the list of meetings to restart the device. It's actually an issue for endpoints CUCM recorded in TMS, where the start event will the CUCM and non MSDS. Thus, we cannot guarantee that the meetings are back after a start.

• Conductor of telepresence

  Hello

  Any RDC to export report driver Telepresence is possible, as CUCM. or for having reported, we require MSDS. Pls suggest

  Conductor send data CDR what whether you are looking for the moment, see bug CSCuj42268, in order to get the Conference CDRs, you'll need to add conference bridges in MSDS. Below the limits of statement are described with conductor conferences.

  • Detail records (CDRs) of appeal conference bridges managed by TelePresence driver will contain all ConferenceIDs.
  • Conductor of telepresence itself does not feed back any conference CDRs to Cisco TMS. Bridges will be however, if added to the Cisco TMS.
  • According to the direction of the call, you could get incomplete of the COR, as outgoing calls can lead to incorrect data.
  • Bridge usage reports is not supported for conferences hosted on a driver of telepresence.

  To read these terms and others, refer to the conductor with the TMS (XC3.0 with TMS 14.6) Deployment Guide.  You can also check the local CMR Deployment Guides for more information as well.

• TMS & conductor error

  All,

  If you him schedule a conference with the driver on MSDS, I try to add an external connection participating via H323 and I get the following error:

  "No possible route the conductor of 1.1.1.1.

  If we change the dial on the SIP protocol and use the same IP address, it works very well.

  What and where is head of Orchestra/TMS checking when trying to add this participant?

  Thank you

  Justin Ferello
  Technical Support Specialist
  KBZ, a Cisco authorized dealer
  http://www.KBZ.com
  e/v: [email protected] / * /

  Hi Justin,

  TMS deliberately rejects H.323 scheduling direct dial-out mode of a conductor, as we can not guarantee that the driver is able to call them. There are no plans to change the behavior, but you can as always drop a feture request via your account manager.

  Kind regards

  Kjetil

• TMS - conductor alias reusable

  Hi people,

  I have an environment with TMS 14.3 + XC 2.2 driver. I configured aliases of the conductor in TMS a range, something like 99XXXX.

  Well, according to the documentation and tests I've done, TMS reuses always aliases in this range, for example, if I schedule a conference to happen today, THAT TMS will receive number 990000, if planning a new conference happen tomorrow, TMS will reuse the number 990000, since it became available.

  Is there a way to change this behavior? I need MSDS to use the range before returning to start. Is this possible?

  Thanks in advance.

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

  Paulo,

  Currently, there is no way to change this behavior. As conferences finishing TMS will come out their identity papers to become available for new conferences.

  Adam

• Differentiate the rooms of Codecs

  Is it possible from a planning perspective to differentiate the rooms of codecs? Scenario is that there will be a pool of 15 available codecs (SX80s) and 20 + rooms.  Can dynamically plan us a room and based on the play, the number of appropriate codecs are allocated for the room. Some parts require more than 1 codec based on the size of the room. Preference is given to specific rooms in the event of a conflict of resources planning.

  Codecs will be in a location centralize a 3rd party router video will manage the delivery of the video (like a kvm switch).

  Thank you

  Ok. I'll tell you about it:

  -First of all, you need to add a bridge to TMS, in your case, conductor. You must configure the driver on MSDS to limit the number of ports available to 15 video.
  -Save all your meeting rooms for MSDS and make them available for planning for end users. When I say 'Save', I mean that you must add to the TMS as not managed using false information numbering system. In addition, if the room is large and requires more than 2 SX80s, you should save this piece twice using very similar names, for example: VC-BR-room-15 (room) and VC-BR-room-15 (video).

  -Save all your SX80 to MSDS and NOT make them available to end users plan (you can do this by changing the permission settings). It is only for the purpose of the management

  -Change the global setting of Type Conference of TMS to "manual connection. At a conference with the type "Manual connection" is scheduled on the TMS, TMS will implement resources multipoint for this conference, however, he will not try to automatically connect the selected participants.

  -Configure TMS to use a driver like default MCU and always include MCU when for routing

  -Give users to specific instructions for planning the Conference on MSDS. They must schedule a conference by using the 'Manual login' type, which will be the default value. They must also choose rooms twice (for parts requiring 2 SX80s, for example).

  -Once the user has made the programming, a technical team must receive the numbering information generated by TMS (usually virtual room number and PIN), as they take the codecs for the rooms and dial in the virtual room of the Telepresence server manually. To do this, you can simply create an email account for MSDS and configure TMS to work with event notifications, allowing some TMS send e-mail notification to administrators and users with details of planning.

  With this 'poor' workaround, TMS will always use the server TP for conference resources, even for the point to point those. Therefore, users cannot program more than 15 rooms (including duplicate), which corresponds to the total number of SX80 available codecs.

  Before you start thinking that this may seem a "working" solution, you must consider that we are only dealing with the planning perspective, there are many other things to consider, such as the layout of rooms, conference layout, audio loop (you have 2 sets of audio devices (microphones and speakers) where you have 2 SX80) etc.

  Personally, I don't like the idea of having more than 1 codec in the same room. You'd better develop capacity audio and video using third-party equipment.

  Finally, once more, consider MSDS is not a product designed for this purpose, and that is why I would never want to sugget allowing you to run this workaround in a production environment.

  Paulo Souza

  Don't forget to note the useful answers and to mark your question as "answered" as appropriate

• It keeps popping up when I'm on the computer: programfiles\commonfiles\paretollogic\uus2\uus2.dll

  Original title: programfiles\commonfiles\paretollogic\uus2\uus2.dll

  It keeps popping up when I'm on the computer. what it means?

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. do you have software Partetologic installed on the computer?

  The procedure below have allowed little to solve these issues:

  "" "" 1. click on start "all programs" Accessories "System Tools" scheduled tasks.
  2. in the tasks scheduled, click ParetoLogic record to select. Then click on "Delete this item" to remove the scheduled task.

• Telepresence MCU - Port vs Adhoc Conferencing booking

  Hi all

  I was wondering why is the MCU software disabling creation of ad-hoc conferences for unknown, when calls media port reservation is turned on.

  Is there a way to run multiway microcontroller, which has the port reservation lit?

  Thank you all,

  Emre

  Hello

  You want to know why MCU works this way? It's simple, because this single behavior that makes sense to the concept of "reserve". Consider the following example:

  You have scheduled a conference in MCU for tomorrow morning at 10:00. You have a MCU 4510 with 20 available HD ports and selected 18 participants in this conference in particular, and you use reserve port, which means you want MCU to make sure that these ports are available to host this conference. Right. Then in the morning, just before the scheduled conference start, some users start an ad-hoc multipoint meeting using multiway and down 4 video ports of your MCU. Then, when the scheduled conference start, MCU will ports available to host your regular conference, once your users use the resources for purposes of adhoc.

  Do you see? Port reservation is a concept where MCU is to ensure that you will have the resources available to the conference in particular, therefore, the only way to achieve this is by totally disabling chartering conferences (ad hoc conferences), so that the MCU will be able to control the entire session and know when its resources will be available or not, either by using MCU to plan or TMS.

  In other words, if MCU allowed you to create conferences whenever you want via adhoc, then the concept of reservation is completely broken, you wouldn't have no guarantee that your resources are really reserved.

  Therefore, if you have need to be scheduled and ad hoc conferences happening in the same MCU, disable a reservation and manually control your availability of resources. If you must make a reservation from port and at time same adhoc conferences, it is not possible except by placing an other MCU in your environment, you will so use an MCU to scheduling with reserve and another for ad hoc conferences.

  I hope this helps.

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."