Schedule automatic start-up every 15 seconds

Similar Questions

• Qosmio X 500 does not start and the power LED is flashing every 5 seconds

  Hello
  I need help my X 500 does not start now. I tried to launch the NB as usual and suddenly the X 500 start or even power up.

  If I press the power button / stop it makes no noise, the power LED on the button and the second power LED just bliks once and turns on and keep blinking every 5 seconds.

  I tried to:
  * Remove battery and power up with AC only
  * power only to batteries
  * remove the battery power button hold for 30 seconds and over power with AC, battery only athen

  but it did not help.

  I checked the LEDs AC & battery, but they do not blink, they are just RED, so there is no problem in battery or AC.

  No idea where could be the problem?

  Thanks for help
  Frantisek

  Hello

  The failure of RAM could be the reason for this behavior of the laptop.
  Remove the RAM modules with good modules tested and check the functionality of the laptop.
  In the case of RAM isn t the troublemaker, the motherboard could be affected.

  Good luck and share your experience with us.

• Compaq presario cq61: PROBLEM STARTING WITH PRESARIO CQ61... CAPS AND NUM LOCK FLASHES every 4 seconds!

  Hello! I have a problem with the starter. When I try to boot my laptop, my screen is black and Maj CapsLock and numlock just Flash every 4 seconds. Then I go to your page to download the BIOS. Well, when I dl and install Recovery BIOS for Compaq Presario CQ61-420EM get some InsydeFlash application, what is it for? I saw in the video that you get HP system BIOS update utility tool and that is the problem for me, I don't understand this application, instead, I get this "InsydeFlash" I don't know what is! HELP PLEASE!

  Hi @patrik13,

  Thank you for the update and confirmation.

  You would be kind enough to mark the post that solved your problem as accepted solution to help others who may have the same experience as you.

  Thanks in advance.

  Good luck with the repairs.

• Satellite A80 121 does not start and make a beep after every 15 seconds

  Hello
  I have a Toshiba Satellite A80-121, and it won't work. Yesterday, worked all very well, but now it does not start.
  When I press the button the button normally has a blue color, then the screen stays black, no image at all, then the fan stops. Then I got a beep every 15 seconds.

  Can someone help me what is wrong?

  Thank you very much for your help

  Hello!

  It sounds like a hardware malfunction...
  If you have installed two RAM sticks try it with a single. Check it!

  I m not a technician to laptop but the problem may be with the motherboard, RAM or CPU, but this is my personal opinion.

  Good bye

• Configuration automatic please wait blinks on the screen every few seconds, why?

  Whenever I start my computer a small window with the text "Auto Config please wait" flashes in the center of the screen every two seconds. This continues for a few minutes. After that he produced intermittently, but each time that it the screen dims and for a few seconds, I am unable to do anything either, no key or mouse fills it. Any suggestions? I scanned and repair errors and defragmented

  Hi YvetteBarnes,

  1. did you of recent changes on the computer?

  2. What is the version of Windows installed on the computer?

  3. What is the number of brand and model of the computer graphics card?

  The error message occurs generally if there is a problem with the monitor adapter or graphics on the computer.

  Method 1

  I suggest that you change the resolution of the screen on the computer and check if the problem persists.

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Method 2

  If the previous step fails, then you need to update drivers graphics card on the computer manually by visiting the card manufacturer's Web site and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem persists, then connect another monitor to the computer and check if it works.

  I hope this helps!

  Halima S - Microsoft technical support.

• My Sony Bravia tv 60 '' is running automatically every few seconds

  My 16 month old 60 "Sony Bravia TV KDL 60EX720 begins to turn and the automatically every few seconds.

  Hello Karen,

  Follow these steps below:

  1. Turn off the TV.
  2. Unplug the power cord of the TV from the power outlet.
  3. Let the TV remain without power for 60 seconds.
  4. Plug the power cord into the power outlet.

  NOTE: If the TV is connected to a surge protector or power strip protector he remove the power strip or surge protector and plug it directly into the wall outlet. If the problem is resolved, the problem is with the power strip or surge protector and not the TV.

  If the problem is still not resolved after following all the steps of troubleshooting, service will be required.

  You can locate the centers of nearest service from the link below.

  https://eService.Sony.com

  If my post answered your question, please mark it as an "accepted Solution".

• Vostro 3550 restarts automatically (loop) every 3 seconds

  Dell support,

  I have a problem with a laptop Vostro 3550.

  When I turn on the laptop, it just is not started at all but it auto resarts at the same time, every 3 seconds, the screen is black.  The food, fan button, 3 buttons and also the front power indicator will flash during this period. Its the same thing happens when it's on battery and when the power cable is connected.

  I did it while waiting for the following tests:

  1. remove the battery and the power cable and press the power button for 1 min and try to turn on.

  2 remove the battery cmos for 10 min and make the procedure #1

  3. remove the memories RAM one by one and do the #1 procedure.

  4. measure the voltage on the connector of the power adapter (it was 19.3v)

  5. measure the voltage on the power circuit inside the laptop for any potential problems with the laptop on board power connector and it was ok.

  6. I checked all disconnected Ribbon or the cable, but everything was fine.

  Everyone has ideas, what is the problem or what I am doing wrong?

  Thank you

  Eris

  Hello Eris,

  Please write to us

  When the issue started?

  Would it be possible for you to try another hard drive or the hard drive on another machine?

  What about diagnostic? Please run diagnostics from the f12 (allow) menu and let us know.

  We provide system tag #, e-mail address and your name via private message, by clicking on my name in blue and then select send a private message

  Concerning

• Automatic start/stop for guest settings keep reproduce every time I access the properties

  Greetings,

  I have a single ESXi host 5.5 with a single Win 2012 std server prompt.   I have a second guest, but is not in production. Several months ago I "thought" I activated the auto start and stop for this particular customer.  Due to problems of food in the building today, I had the opportunity to stop the comments and the turning off of the host completely.   After the reboot of the host, my guest, never started (automatically). I connected to the host via vsphere client and started manually.  No problems.

  I decided to check the settings of automatic start/stop and it is set to manual.  So, either I never actually put it on automatic (and I just have problems of memory in my head (not unusual for me)) or I put it really, and something happened where he became disabled or brought back to the default value.

  That said, I went to properties of start-up automatic and as mentioned above, found it turned off, I was able to allow him, but when he returned to the screen (after clicking OK), it displays TWO of each of my virtual machines in the Autorun screen.  I went back to see if I could change/delete/remove the extras (I've found a way to do it), and when I came back out of the screen there are THREE virtual computers listed in the pane. See attachment.  Anyone know what is happening here and how can I remedy the situation?

  Am I just being a fool and lack of obvious?

  Thank you.

  P....

  

  Exit the VSphere client and restart it solved the problem.  I presume a video type of bug, or maybe a bug with my version of the client.

• videos start and stop every few seconds

  Why the videos load every few seconds?  I can't view a whole video without 4 or 5 second breaks every 4 or 5 seconds.

  Hello

  You can try resetting Internet Explorer as follows: be aware that this will remove bookmarks and saved passwords etc

  Open windows control panel, open Internet Options, click the Advanced tab, and then click the reset button.  Click 'Yes' or 'Ok' for all additional guests needed to complete the process.

  Once completed, open IE and click on the Adobe link yet to invite the reinstalling of the component ActiveX - once this is completed, reboot the laptop.

  Kind regards

  DP - K

  

• schedule the automatic start of oracle 10g R2 on RHEL5

  Hi master,
  
  I use oracle 10g R2 on RHEL 5. I want to program the automatic start of the oracle on linux start database.
  
  for that I have referefed the docs and plan its in the file/etc/rc3.d. but it does not work.
  
  It is written in the docs that this charger friub fron of process this file and start their beds according to their number.
  
  the file is as follows...
  
  #! / bin/sh
  #chkconfig: 346 99 10
  Description #: Oracle automatic start-stop script.
  #
  # Change the value of ORACLE_HOME to specify the right Oracle home
  # To your installation directory.
  
  ORACLE_HOME=/U01/app/Oracle/product/10.2.0/Db_1
  #
  # Change the value of the ORACLE of the connection of the
  owner of oracle # on your site.
  #
  ORACLE = oracle
  
  PATH = ${PATH}: $ORACLE_HOME/bin
  HOST = "hostname".
  Platform = 'uname '.
  export ORACLE_HOME PATH
  #
  If [!] "$2" = "ORA_DB"]; then
  If ['$PLATFORM' = "HP - UX"]; then
  Remsh $HOST-l $ORACLE n ' $0 $ 1 ORA_DB.
  output
  on the other
  rsh $HOST-l $ORACLE $0 $ 1 ORA_DB
  output
  FI
  FI
  #
  case $1 in
  'Start')
  $ORACLE_HOME/bin/dbstart $ORACLE_HOME
  ;;
  'stop')
  $ORACLE_HOME/bin/dbshut $ORACLE_HOME
  ;;
  *)
  echo "use: $0 {start |}". stop}.
  output
  ;;
  ESAC
  #
  output
  
  What should I look for?
  
  my listening service is also not automatically get started. I have to manually...
  
  any suggestion?
  
  Thanks and greetings
  VD
  
  Published by: vikrant dixit on December 23, 2008 21:58

  VD,
  This link willl helpp
  http://www.Oracle-base.com/articles/Linux/AutomatingDatabaseStartupAndShutdownOnLinux.php
  HTH
  Aman...

• Windows bogs down every 3 seconds after startup (Vista ultimate x 64)

  I hope someone can help.
  My system running in a weird way, which, for lack of a better term, "failed" every few seconds.
  My processors boost all few seconds all the normal functions stop, essentially, even typing and move the mouse cursor. It started after the latest Automatic update has been installed. I noticed after a restart that 3 minutes after I choose my account and start all programs of initial commissioning, the problem starts again.
  This also happens before choosing which account at startup under.
  Safe mode does not exhibit this problem.

  Can anyone help?

  Thanks in advance.

  Hi rvas324

  Welcome to the Microsoft Vista answers Forum!

  Option 1:

  As the computer works fine in safe mode, the next step to try is start the computer to the boot to check what software is conflicting.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to run check and clean boot if you have the problem.

  i. Click Start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  II. in the general tab, click Selective startup.

  III. under Selective startup, clear the check box load startup items.

  IV. click the Services tab, select the hide all Microsoft Services check box and then click Disable all.

  v. click OK.

  VI. When you are prompted, click on restart.

  VII. after the computer starts, check if the problem is resolved.

  Check what third-party software is conflicting with the program and disable it or uninstall.

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Option 2:

  Try to perform the commissioning of repair to fix. Link below will help you do the Startup Repair

  http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx#ex

  Option 3:

  You can do the system restore. Restore the system to the date it was working fine. Link below will help you to complete the restore of the system: http://windowshelp.microsoft.com/Windows/en-US/help/517d3b8e-3379-46c1-b479-05b30d6fb3f01033.mspx

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer hangs every 30 seconds in all programs

  My computer freezes every 30 seconds.  Sound stutters and hesitates the cursor.  Freeze only lasts for 1 second, but this is very embarrassing.  It happens in all programs and at all times.  I have tried several programs fix - it as advanced system of cleaning and difficulty cleaning without result.  I downloaded process Explorer and it shows my use of cpu amounting to a normal 7 to 20 percent when the stuttering occurs.
  I have a Dell Studio XPS 9000
  Intel Core i7-920 processor
  8 mb L3 cache clocked at 2.66 ghz
  8 GB SDRAM DDR3 at 1 066 mhz
  ATI Radeon HD 4350 w / 512 MB
  Windows 7 Home premium 64-bit

  This started about 2 months ago and drives me crazy.  Any help will be much appreciated.  I really don't want to go through the trouble of reinstalling windows 7.

  Original title: freeze momentary

  Hello

  Check with Support from Dell, their online documentation, drivers, diagnostics and ask questions in the forums on
  known problems.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  =========

  Use the startup clean and other methods to try to determine the cause of and eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  above is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Is why firefox connecting permanently so that on a web page? The wheel turns every 10 seconds or more. I reinstalled firefox, so I need help.

  Firefox is always 'connection' while I'm on the web. It does not matter what site I'm on, but he keeps linking (wheel rotation) every 10 seconds or more. As it is reload the page. The page does not disappear, but it drives me crazy because it did not used to do this. I have download a free trial of WordPerfect, but it was not what I was looking for and deleted. I also reinstalled Firefox, so I don't know what is happening. Help please! I have a Windows 7 Sony Vaio computer. I ran virus check a couple of times and it came out very well.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• Lock screen and mouse L850 satellite every 2 seconds

  I think I have a hardware problem with the Satellite PSKDLA - 0C800R L850.

  It is a laptop I bougth to my wife but he has ended up with my stepson of Uni studies. While he had it the hard drive is not one of his friends replaced. twelve months later, he advised it was gone blackscreen and G'nort would turn out.

  I finally got hold of it again and managed to drain the power remaining and replaced the CMOS battery remove a strip of RAM and it starts fine. I've proved a faulty stick so that left aside. Then I realized that there was a problem with the screen and the mouse

  . The screen would brighten up (wash out) then Flash and stabilize. First thought was video chip or the driver.
  At the same time would lock the mouse. When the screen clears the mouse would again.
  Happening every three or four seconds but now every two seconds. It is more difficult to do something.

  Have reloaded many drivers, but I think it is material, but not sure if it needs a motherboard or processor.
  Can you advise?

  I forgot to mention that the image of the screen is slightly down from senior management.
  Tere is a few millimeters of black with a white line on the top edge of the image.
  This white line seems to come on and off with the locked mouse synchronization and the screen. This is another indication of the problem or the backlight?

  Hi, have you checked the thermal paste between the CPU and the heatsink?
  CPU fan blows hot air outdoors?

• Satellite 1800-514-display is off every few seconds

  Yesterday, I have a Toshiba Satellite S1800-514. I have install the OS (Windows XP Home) again.
  Laptop screen turns off every few seconds. When I press the small button above the power switch (sensor for portable fence) there is a beep and the screen wakes up again.
  Same procedure again after a few seconds (5-50 sec).

  Is there someone who can explain what happened and how to fix this?
  The problem exists in all modes (Setup/bios dialogue, BACK, starting of WinXP, running current WinXP command prompt).

  Thank you!

  Hello!

  It's not easy to say what is causing the problem, it could be the inverter FL, chip graphic, LCD display...

  In your case, you should first test an external monitor. If the external monitor doesn't work properly, it s a problem with the graphics chip or motherboard. If the monitor does not work this is a problem of the FL inverter or LCD.

  Good bye