Scheduling automatic close and restart-ignored

Similar Questions

• When we look through the Explorer of windows folders automatically closes and restarts.

  Hello

  a year ago I started having problems with searching through my files because windows Explorer kept crashing whenever I used it to browse my files. It started after I removed some games and other stuffs manually to my computer because they were not on the list of installed programs.

  Since I had this problem, but I've never even bothered to fix, because I don't use my work for school.

  I'm going to College next year and my laptop, it needs to be fully operational ESPECIALY with the navigation and management of my files.

  I was looking through the forum for a while and tried a few suggested corrections.

  Well, I gues now you can say that they did not work.

  In any case, one of the forum administrators suggested to ' sfc/scannow' in the command prompt.

  I did this and found that there are some corrupted files that cannot be repaired.

  I guess the best thing I could do right now is just after the newspaper here and hope someone can help me.

  Seemably, I can't open the CBS.log newspaper... Access denied-I am administrator on my laptop...

  If someone could help me with this so I can post the log here...

  Good reinstall it sure to be a good solution, but it will be a little more work on you because you will have to download and install all your favorite again by Web sites or CD programs, they came.

  But that does not mean it is a bad choice: you will have a fresh new PC that has no persistent problems or stuff it slows down.

  If you want to go this route, you will need to know if your computer is equipped with a factory reset CD disc, or perhaps it was integrated.  Most newer computers have it integrated where you just reboot and press a special key (usually F2 or del but it could be anything) and it will do a factory reset for you.

• Why my mail automatically downloads, and I always have to close and restart?

  My windows mail has been reloaded when I replaced the hard drive.  Since then, when I opened this mail downloads as expected and I can send or answer if I immediately.  I can't refresh the mail, and I can't send later.  Whenever I want to check for new mail, I have to close and restart.

  Looking for interference of advantage program 3rd such as antivirus software.  See www.oehelp.com/OETips.aspx#3

  Also, try to compact and repair the database: www.oehelp.com/WMUtil/ and see if that fixes the problem.

  Steve

• After I create groups of tabs, and then either close the tabs or close and restart FF, tab groups disappeared. How to make tab groups exist for several sessions?

  How a tab groups exist after a close and restart FF? or why the content of a group of tabs disappear if the tab is closed?

  See how to use tab groups to organize a large number of tabs

• computer restored IBM won't let me go beyond the introduction of identy... closes and restarts the computer to the same: Enter name and ID... then again, it does the same thing. How can I save this monster?

  computer restored IBM won't let me go beyond the introduction of identy... closes and restarts the computer to the same: Enter name and ID... then again, it does the same thing.  How can I save this monster?

  Hello

  First, disconnect all the external devices connected to the computer, and then try to start and check what is happening. If the same happens, then you can try to start in safe mode and check if you are able to boot to the desktop. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My tosihba continues to close and restart is windows incorrered message an error and stops at system

  My tosihba continued to close and restart get windows message incorrect, an error and stops at system

  1 try this:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-encountered-an-error-and-will-shut-down-in/de7a9650-2011-4D05-8b36-65f8ee4c5412

  2 and to do this:

  http://www.bleepingcomputer.com/tutorials/how-to-remove-a-Trojan-virus-worm-or-malware/

• MS Word does not work after automatic update and restart last night

  I woke up this morning to my system locked up.  It took 3 restarts to get it up and running again when I saw the stage 3 of 3 update itself during the restart.  Everything seems fine except the word.  Launch of word gives me a "Word automatically saved chages in the Normal document template. You want to load it? "Everything that I say, it seems to run very well, but I have no control of the mouse in the document; I have to move using the arrow keys.  The mouse works in the toolbar.  When I try exciting Word, I get the Microsoft Word has encountered a problem and restarts - that load the normal.dot file dialog box and then everything starts all over again.

  Hey,.

  See the link to the resolution on MS word questions.

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx#13

  DOM.

• Help the clean installation of Windows 7 Pro and using the GPO to run automatic updates and restart all night

  I am trying to solve a problem that will probably require a new installation of Windows 7 Professional 64-bit. The grace period ends in 3 days, and the next 30 days are final exams at the College. I have 2 licenses (and product key) of Windows 7 Pro, but my drive HARD goes wrong and I don't want to use MAK activation. I will be eventually to replace the disk, but is now bad timing.

  If a reinstall is needed, I was going to ask if anyone knows how to set the strategy of perhaps a GPO where Windows is updated automatically in the background and after installing updates, 45 or 60 minutes, then restart. The goal would be to have a computer fully patched when I wake up in the morning.

  This is my plan:

  Install Windows 7 Pro SP1 64 bit > Windows automatically updated and plug the Ethernet cable > define a GPO where the computer waiting for 45 to 60 minutes after installation of updates (so the msi may end in the background, and I do not interrupt the installation) > the PC will restart > more update swill be downloaded and installed > wait due to the policy of GPO before reboot > Reboot > do it until it's over. > wake up with a PC fully patched 7-9 hours later.

  Is this a workable plan?, and if so, how do I define policies such as delay restarting, etc. to achieve?

  The reset did not work. It would be a simple solution. I have a valid license, but I don't want to replace the HARD drive until after final exams are over, so I'll reinstall and activate. I try to achieve in the next 24 hours, so it doesn't keep me from my school work.  I must also support and will then replace my files.

  Feel free to advanced used terminology. I have some experience.

  Any help is greatly appreciated!

  Another question: should I install a security suite before all updates being installed more than 12 hours, or wait until later? What is the level of risk?

  Anyone used Ninite to automate the installation of other programs? Is how safe it?

  Thank you!

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• Why close and restart after 1 hour, while I am still connected to my computer?

  My computer restarts automatically after an hour and I lose and have to reconnect!  Help! Don't know what to do!  Have windows Vista Home premium. Never had this problem before, until now!

  Hello

  Check the Task Scheduler to see if you have anything put out there.

  http://www.Vistax64.com/tutorials/132903-Task-Scheduler-create-task.html

  ---------------------------------------------------------------------

  Could be linked to the heat, make sure that the computer has adequate ventilation, maybe use a small fan to
  Add air flow. On a PC, the cards, the memory and the cable (both ends) will need to be reinstalled.
  Remove all power and remove and replace those, don't do not just tight. Can't do that on a good laptop.
  Also check the power supply Plan of Advanced Options to make sure there aren't some parameters here that cause
  power off - Control Panel - Power Options.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------------------------

  Check with this utility, just in case there is a situation of blue screen.

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  accidents and displays the information about all crashes in one table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Keep my pinned tabs disappear when I close and restart Firefox, this isn't after a crash. How can I stop this?

  Keep no apparent reason of my pinned tabs disappear from Firefox. This has happened three times now. I have not synchronized to any device. I keep my story and not erase it.

  Hello Silvia,.
  Sorry, you have problems.

  The system to store this information seems to be a bit fragile.

  When trying this please ensure you favorite whatever it is open and close the unnecessary tabs and don't let any ongoing work, initially you can lose more than just pins tabs. Once things go wrong, that several sessionstore files can be created, clear duplicate follow these instructions:

  1. See this for instructions on the profile search. Use the troubleshooting information, while Firefox is open profiles - where Firefox stores your bookmarks, passwords and other user data#w_how-do-i-find-my-profile
  2. Make sure that everything is backed up or bookmark and close Firefox
  3. Remove all duplicate sessionstore.js files found in the profile. Those with a number or.bak
     As mentioned in http://kb.mozillazine.org/Firefox_hangs#Multiple_sessionstore.js_files
  4. Restart Firefox, you may have lost some information i.e. pins or other tabs
  5. In the future when shutting down Firefox always use the menu option, which is from the Firefox button on a Windows machine. Do not kill the process, or close the window of final Firefox using the Windows icon at the top right.

• Why Windows XP keep close and restart

  This happened twice last night and again tonight.

  As noted, am on Windows XP, use AOL (was on the internet when it happened). Recently the microsoft - arranged security, probs had reinstalled. Am running off the coast of the phone while making the new headrest happened and installed. Just equipped BT iplate Accelerator yesterday. The last 2 are due to the fact that speed trying to improve broadband services has been about test only 400kps socket 1.3 Mr. don't know whether or not it is connected to. Help. Computer is in the exit door. ? Does not see why Windows affected by other issues, but who knows. Laughs. Difficulty just one thing then another pops up.

  Simple instructions, please. (Do not know if I chose the right topic below - performance and Maintenance)

  Thank you.

  Hi TINA_L,

  Follow the steps in the article.

  Windows XP restarts unexpectedly or restarts when you shut down the computer

  http://support.Microsoft.com/kb/320299

• Windows Explorer closes and restarts (?) when I right click on a file photo.

  One time, I installed a software to go with a slide scanner. The software changed to the default program for photo files and then proceeds to seize up after that about 12 slides have been scanned. I removed the software, but every time I do a right-click on a file photo, jpeg, gif, bitmap, etc., or try to open the file menu when one is highlighted, close all Windows Explorer Windows and icons in the taskbar and desktop disappear for a while. The last two return after a minute or two, but not all open windows. Other programs such as Internet Explorer or MS Word are not affected.

  I suspect that the defective scanner software installed an entry in the context menu. Search for it and delete it using the ShellExView free program:

  http://www.nirsoft.net/utils/shexview.html - ShellExView

  Make a right-click is slow or weird behavior caused by context menus management - http://windowsxp.mvps.org/slowrightclick.htm
  Manage the entries in context menu for folders, readers, and the Namespace objects - http://windowsxp.mvps.org/context_folders.htm MS - MVP - Elephant Boy computers - Don ' t Panic!

• iMac has been close and restart

  I noticed other users with similar problems. However, I have experienced this problem before even the recent security update. It occurs randomly during use, but it is more likely to occur during the signing in and switching user accounts. One out there knows how to solve this please? Thank you.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• When I connect to Verizon, the secure web page makes my bookmarks bar disappear, cannot recover unless I close and restart Firefox. Mac, 10.5.8, Firefox 3.6.23.

  Once logged on Verizon, I had clicked through a number of links, finally land on a page where I noticed my toolbar has been is no longer displayed. When I checked my settings, they were still checked to display the toolbars. If I quit and then relaunch Firefox, everything is the way it should be again. Something about Verizon? Never seen this problem before. Cannot provide the URL, because the https address.

  See:

  • http://KB.mozillazine.org/Prevent_websites_from_disabling_new_window_features
  • http://KB.mozillazine.org/JavaScript#Advanced_JavaScript_settings

• Connection problems. Cursor "turns" without touching the keys. Keypad lock. Tracpad disconnects. Need to close and restart before both work again. Any guidance will be appreciated.

  CONNECTION PROBLEMS.

  CURSOR "Runs" AFTER I TOUCH a BUTTON AND THEN the KEYBOARD LOCKS AND TRAC PAD DISCONNECTS.

  NEED TO SHUT DOWN I HAVE MAC AND TURN IT BACK ON AND KEYBOARD WORKS OK.

  IT IS AN INTERMIITANT BUT AN ANNOYING PROBLEM AND I WOULD GREATLY APPRECIATE SOME GUIDANCE.

  Thank you

  Hello

  Please, do not type in capital letters, which is considered yelling that I am sure that you are trying to do.

  Have you had the opportunity to read If your Apple wireless mouse, keyboard or the trackpad will not work as expected - Apple Support ?