secondary use on local network

Similar Questions

• How to export a project FCPX using multiple Macs on a local network?

  Hi, I have two Macs and projects FCPX on two Macs.

  How can I use the power of the Mac processor export a long project that takes several hours to export on a Mac?

  Two Macs on a local network and can be seen on the same range.

  YYou would need for this compressor. Cannot directly of the PCF.

• How can I configure VPN to allow someone to see my local network but use their own internet?

  OK, I have the VPN all the settings and it works decently, but one thing I really want I can't understand.
  When 'Default gateway to use on a remote connection' is checked in the customer then remote users can connect to the vpn, access in the right subnet and to access the internet

  When it is not enabled, users cannot access the computers on the subnet (other than the remote desktop to the vpn Server itself using the local IP address), but they can access the internet through my network.
  If it is checked and then access the internet through my network and subnet.

  What I would like is to be able to have users access the subnet as if they were here, but use their own internet for everything else.
  Who is? What Miss me to make it work?

  OK, I have the VPN all the settings and it works decently, but one thing I really want I can't understand.
  When 'Default gateway to use on a remote connection' is checked in the customer then remote users can connect to the vpn, access in the right subnet and to access the internet

  When it is not enabled, users cannot access the computers on the subnet (other than the remote desktop to the vpn Server itself using the local IP address), but they can access the internet through my network.
  If it is checked and then access the internet through my network and subnet.

  What I would like is to be able to have users access the subnet as if they were here, but use their own internet for everything else.
  Who is? What Miss me to make it work?

  Hi, Talkingscientist,

  Try this

  Linksys

  http://TechNet.Microsoft.com/en-us/library/cc302437.aspx

• cannot connect to the local network using windows 7

  Recently bought a HP Pavilion laptop (AMD Athlon II P320 Dual - Core) ((G62 - 208CA)). Having a problem connecting to the local network. I have flashing lights on the lan (orange and white) connector.

  Using the ipconfig command, I get an IP address, subnet mask and gateway by default however messages below will appear:

  Tunnel adapter isatap. <578608BD-22EF-4A01-90ED-D709CB81D027>:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel connection to the Local network adapter * 9:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel adapter isatap. :

  State media: media disconnected

  The connection-specific DNS suffix. :

  TEREDO TUNNELING Pseudo-Interface tunnel adapter:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel adapter isatap. our field: *

  State media: media disconnected

  The connection-specific DNS suffix. :

  I tried to turn off the firewall and connect without success

  My network card is a Realtek PCIe FE Family Controller and confirmed that the drivers are up to date

  Any help would be appreciated

  Thank you

  Well Yes! So it was an older version of the bonjour service... thank you Adobe.

  You can find the latest version here:

  http://support.Apple.com/kb/DL999

• Connected to the local network, but can not use internet

  I recently had problems with access to the internet after reinstalling windows 7. Before the reinstall worked very well.

  I can connect to the local network without problem, and it shows that the internet is connected. Yet I can not access the internet. When I disconnect and reconnect, I get a few seconds of internet work before it stops working.

  When a diagnosis in the network and sharing Center, I get the error "default gateway is not available" and occasionally "the connection between your access point, etc. and internet is broken"

  Other computers and devices using the network are working properly, although there was a 'competitor IP address' error on another pc, which, after a reconnection, solved itself.

  I use an edimax 802.11n wireless card and a D-link router

  I tried several things to make it work again, but without result. Any help would be greatly appreciated

  disable TCP/IPv6 had no effect.

  I think I can have fixed me, I installed the driver microsoft before the reinstall instead of the driver edimax and internet suddenly started working.

  Thanks for the help of yor

• ASA 5510 VPN - using a public IP address for the local network

  Hello, I have a problem which is probably very simple, but I can't seem to understand.

  I set up a site IPsec connection to another with a company, something I've done many times before without a problem. I use ASDM to configure this, because it is quick and painless, usually.

  We have one number of other site-to-site currently configured connections and works very well on this ASA, these are configured with the "Protected network - LAN" configured with the IP private of hosts within our network, we want to make available through the separate tunnels. This includes the configuration setting on our ASA for each connection to "guests aside ASA exempt from NAT.

  With this new link, however, the company asked us to use a public IP address for the host that we want to achieve through the tunnel. I don't know why, but they demand it. So I added a NAT rule for inside the host and set up the connection with the public IP address under "Local network". During the test to try to reach a host to their side, the tunnel didn't even try to open.

  What is the method here? I don't see where I'm wrong. I'm guessing that the 'host side ASA exempt from NAT' does not require for this, how if the ASA would know which internal host is the public IP address.

  Any ideas?

  Hi Leo,

  The steps are:

  1. Add the policy rule NAT for the specific host.

  2 - define the IP NAT as your LOCAL NETWORK address in the encryption settings.

  3 make sure that there is no rule NAT exempt for this host to the specific destination.

  What happens if you run a package tracer?

  Thank you.

• InDesign cannot be used if I do not mount a share on my local network drive

  Hello

  Thank you very much for reading this thread, I'm now here.  Please can you guys not take a look at my question for Indesign CS6

  My configuration is:

  MacBook Air early 2014 with 8 GB of ram

  OS system: Mac OS10.10.4 (Yosemite)

  CS6 inDesign with all necessary updates

  My problem is that when I launched Indesign without my drive from editing on my LAN, I'm not able to open same Indesign.  I tried to delete the preferences in Indesign by Cmd + Opt + Ctrl, shift, but it does not work for me.  Now, if I want to use Indesign, I need to plug my drive share in my local network first, otherwise, it will not launch.

  Please share your related information for why it happens and how to solve the problem.  If all goes well, I don't have to reinstall the Indesign or even to reinstall the whole system.

  Thanks in advance

  Pui Yan

  Hello world

  I am sure that this post is deep to the bottom of this forum and seems that no one has the same problem as me.  However, just in case if someone has the same problem, I want to offer my find here.

  To get the answer at the beginning.  Someone or get me a font alias into my police record from Indesign, that's why every time I open Indesign, I have no choice but to link to our network share drive.  Once I removed the alias, everything is back to normal.

  Without a doubt, that it is my carelessness.  However, I found the folder of fonts in Indesign is very useful, if you need one hundred open files Indesign difference difference sources or the difference of the projects one day and do not want to use third-party font management tools.

  I hope that the information can help

  Have a great day

  Pui Yan

• IM at the Senegal West Africa. I want to use a local Orange sim card.  I was told that my iphone 4 has been unlocked. But

  How can I use a foreign SIM card while overseas on my iphone already unlocked 4?

  Hello Sknejbert,

  Thank you for using communities of Apple Support. It is my understanding that you try to use a foreign SIM card while traveling abroad. I know it's very important to be able to access a cellular network while you are traveling. I'm happy to help you.

  If your phone is unlocked, you can usually buy or rent a SIM card from a local carrier in the country you are visiting. The link below provides additional information on how to use your iPhone with other networks while traveling.

  Use the cellular networks on your iPhone / iPad, while traveling abroad

  Have a wonderful day and safe travels!

• Addition of AirPort Extreme allows a Local network behave strange

  Hello

  At the moment is have this setup at home.

  DSL-> provider Modem/Router-> LAN-> airport of Time Capsule

  The airport Time Capsule is the generation model current 5th A1470 of running in mode Bridge with the router form my provider and implements a wireless network. It all works very well, but in my office working there WiFi coverage is a little low is a desire to grow with another airport.

  This is the configuration of the construction:

  DSL-provider of Modem/Router-> LAN-> airport of Time Capsule-> LAN-> Airport Extreme >

  Airport Extreme is the generation model 1408 5th also running in Bridge Mode and extend the wireless network. When I perform this configuration, the problems start. All devices bad connection to the internet, features are added several times on the network (also the Airport express are added some time because it appears with a (2) after East), in Airport utility, I get constantly disconnected status and it is very difficult to resolve, because I lose the connection even if I'm hard wired to the airport. I can also access devices that have a static IP address as the same router (192.168.1.1) or my home server. Thus, it seems that my local network is malfunctioning.

  When I unplug the Airport Extreme, everything works well again. I searched but not found this problem.

  Thanks for the help.

  Airport Extreme is the generation model 1408 5th also running in bridge and extend wireless networkMode.

  You can NOT extend wireless with the AE plugged into the TC.

  Your choice of plug in ethernet is good.

  Your wireless installation must be to create a wireless network... you can use the same name as the TC's wireless or different... It is totally up to you.

  What you did is due to a loop with the connection by both wireless and ethernet.

  If you want to use extend wireless... much slower option... then you disconnect the ethernet AE of the TC... If the connection is purely wireless.

• Use of local music streaming data

  I use a small network of stations express airport connected wireless to a airport extreme base for listening to local music to the speakers connected to the express stations. I noticed that my package is running much faster now. If steam local music uses sort to the top of my internet package? Also, as soon as the beam runs, I can't listen to music stored locally more extreme Airport stations. What is going on?

  The only way that streaming can locally add to your cap of the Internet is if the media server needs to access the Internet for a reason any perform streaming. Some examples could be that he needs access to the metadata of the song (art information or song of the album) or check its license.  Another is that the song is not really on a local media storage device, but is in the cloud.

  There are also a number of applications, that you can use to determine what local traffic is going to the Internet, at least of your computer if it hosts the media server.

  Some examples are:

  • PeakHour 3
  • Private investigator

• Toshiba 47L6453DB Smart TV connects to the local network

  I recently bought this TV. I plugged in my local network and Smart TV cannot connect. I get a message asking me to check the network settings. I tested the ethernet cable and the plug with a laptop and they both work very well. I use a broadband of BT router.
  I also selected "wired" when asked the type of connection.
  Any ideas?

  Posted by conorking
  

  I recently bought this TV. I plugged in my local network and Smart TV cannot connect. I get a message asking me to check the network settings. I tested the ethernet cable and the plug with a laptop and they both work very well. I use a broadband of BT router.
  I also selected "wired" when asked the type of connection.
  Any ideas?

  What is the result of the test network connection? He passes or not? If it fails, the SW-version running on the set?

• Re: Satellite Pro A40 - connection to the local network

  Hello

  My names Andy and not bieng a total beginner computer, I tried to install all the drivers for my laptop model a SPA40 old fathers PSA45E-001VM-EN. (European model I think) everything looks ok, except that I can't get the ETHERNET driver.

  When I go into the Device Manager there is NO controller network displayed in the list and there is a yellow exclamation mark against two controllers ethernet ib the OTHER DEVICES tab looking here, I downloaded the atheros wlan xp file - 7704062.zip, broadcom wlan xp - installed 5604835.ziplan20070912134727.zip and nothing changes, we used to be able to go on the net and with the wifi card in the pci slot wireless go so I know its capable I think it's just the order of drivers and the drivers themselves,

  Then someone can point me in the right direction before as I have send myself crazy with this...

  You can

  regards and thanks in advance

  Andy

  Hey,.

  The drivers that you downloaded are WLAN Card and has nothing to do with the connection to the local network (Ethernet) normal

  I think you should check the Web from Toshiba site to download the latest LAN driver. You can find the drivers for Satellite Pro A40 in * archives *.
  ttp://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp h

• I can connect to the local network, but not to the internet

  Why in an internet connection, I can connect to the Local network, but not to the Internet.
  I have valid IP address and configuration is good.

  I recommend you read some threads here in the forum about similar issues.
  If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
  Using the WiFi network, you must check if the common WLan parameters are favourable;
  Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

  Good bye

• Satellite A105-4114 will not recognize the connection to the local network

  Whenever I plug my cable ethernet to ethernet port on my laptop, the ethernet port does not recognize my cable, even if the lights are flashing. I updated my LAN driver a week ago, and it has not really helped. My internet service is provided by my apartment complex at the school, but I don't think it has anything to do with it, because I had this problem last year living in dorms and at home. I have to restart my computer everytime for my computer to recognize the connection to the local network. Can someone help me please?

  Driver: Intel (r) PRO/1000 PL Network Connection

  Wireless connection works fune.

  Hello

  First of all, you should check your LAN cable.
  Sometimes the laptop may not be correctly connected to the LAN as a result of a defective cable.
  In addition, you should check if the network card is properly recognized in Device Manager. He should t be a yellow exclamation!
  In addition, you must check the settings for the TCP/IP protocol in the LAN card properties.
  TCP/IP must be set to automatic. I assume that you are connected to a server and the server supports supported a range of IP addresses and assigns it automatically.

  Last but not least check if you are using the latest version of the BIOS.

  Welcome them

• The local network settings for arbitrarily lose connectivity with ADSL modem

  Hi all

  I have a SAGEM 1500WG ADSL modem for internet connection and a laptop Satellite A100 (PSAA9). I noticed that arbitrarily, the ALARM led on the modem of DSL connection worked again (according to the lights on the modem) and the real problem was that I couldn't ping my modem. The problem was inside my local network. I can't be sure that what happened outside my LAN because I could not reach even the modem.

  The only solution is to reset the modem. After 4-5 months of use, I have concluded that, whenever this was happening, I used Azureus to download a movie and this download was pretty slow (for example because my counterpart have fast connection). Also, I was connected with wire and NOT using the modem wireless. This means that: the problem never appeared when the wireless or Azureus works and download a significant amount of data.

  I wonder if the LAN driver has any firewall installed on it. Or if she has any function that transforms the power driver LAN offshore when there are very few or no data go through it for a certain period of time.

  Or East-Azureus has any odd décor that reminds you of something above?
  The combination I think is problematic is "adapter LAN + Azureus work + very little data being downloaded. Maybe I'm a little confused. Anyone who has experienced the same problem or can come up with an idea will be extremely useful.
  Thank you very much.
  Lambros

  Hello

  Don t think that there is a problem with the LAN settings or the LAN driver on the device!
  Your data transmission to low and transfer depends on your service provider Internet (ISP) and the server.
  Your Azureus application does not for me, but in my easy it s a transfer of connection and the data of the software simply PEAR-pear file also depends on the number of users and the connected clients