SCOM volume space alert

Similar Questions

• How to reduce the volume of alerts in FF when using webmail without lowering the system volume (Mac)?

  I use Mac OS 10.6.8.
  When I access my webmail via Firefox, I get a Twitter hard whenever I have send or receive a new email.
  I contacted my ISP (Optimum) and they said tell Firefox to my computer to make the sound. They say that they have no control over it.
  I tried to reduce the volume of alerts in my system prefs, but it has not affected the volume of FF.

  How reduce or disable volume in FF when using webmail without lowering system volume?

  Thank you!!! The 'sound' button off in their preferences. Fixed. (It was so freakin ' fort!)

  I, in turn, chatted with Service to customer of Optimum and tells them that they must tell their supervisor to better educate their own service to the customer, instead of passing the ball. We'll see.

  Let contributors Mozilla smart to not return the ball.

• TEMPRO v2 - changing the threshold of disk space alert

  Hello

  I downloaded and installed Tempro v2 on a Satellite A200. It works well.

  However, tempro was a problem that was present in version 1.x.

  Disk space alert low value trigger, much, much too early to the disk space of 25% on any partition. On a modern drive, it is around 15 GB. It's average, far too early to say a problem. I swiched disable this alert - I don't want to do. There seems to be no way (that I can find) to activate this alert to raise to a more reasonable value - 10% left of disk space or a given amount of space left - say 2 GB.

  Y at - it a fix for this or have I missed how to set this value, because I don't want to run without knowing that I'm under low disk space? This alert to 25% is irritating.

  Thank you

  Clive

  Hello

  I don t think you can change this value or parameters
  TEMPRO sends notifications about the status of the entire HARD disk and it is why you received this message.

  I have this tool on my laptop too but didn t find settings that would disable the notification on simple partitions on the HARD drive

• iPad volume pro alert still broken?

  My new ipad volume pro alert is unexpected, much too low. Since I use the camera for urgent alerts, related to work, I'm about to return it and get a tablet of windoze (gasp). I prefer to stay with Apple, but I also prefer to remain independent.

  Hi unxrules

  Let's start with what is obvious. Did you that the ALERT AND RINGTONE volume slider is completely upward?
  Settings > sounds

  If this is the case, try to quit all applications and do a reset.

  Reset: Press and hold the sleep/wake and Home buttons and do not let go until the screen darkens and the Apple logo appears (no data is lost)

• Full volume space

  I have a Bay Equallogic PS 6000 box which 6.3 TB total capacity. And storage array firmware version 6.0.6.We are all thin provision enabled in three volumes. Two volumes are used for messaging HA clustered server. On the second server we keep some mail backup using planning. After a few weeks, we found our second volume where we keep weekly backup is full. Then connect us to the server and delete a few TB of data to backup in the volume of connected server. And the server its was showing a lot of free space on the volume, but equallogic web management console it showed same occupied the space on the volume.

  I not found all the options in the Equallogic web management console not to offer a free space of the volume.
  Table shows very little space please suggest me what command I use to recover my space of volume after the deletion of data.

   

  EQL is block storage, and as long as the operating system does not say the SAN that it have something deletet your SAN never have free change of some blocks, and get some space back.  Remember that an operating system in most cases does not delete the data on a disk, but just mark it as deletet and substitute later.

  Windows Server 2012 supports the command SCSI cancel the necessary mapping for reclaming on THIN provisioning EQL volume disk space.

  For Windows Server 2008 (r2?) HIT EQL brings the eqlrethin.exe you need to run it manually. If you are running VMware vSphere, it depends on the Version how to undo the mapping of works.

  You didn't tell us what server OS or hypervisor youre using.

  BTW. If your FW 6.0.6 has no emergency path H2 installed pls upgrade to F W6.0.7 urgent.

  Kind regards

  Joerg

• Adobe CC storage space alerts

  Hi, I'm confused about my storage space on my Adobe CC account because I frequently receive alerts that I am running out of storage. I currently have a version student (limit of 20 GB.) When I click on the info of creative cloud on my desk, the dialog box indicates that I am only using 3.22 GB (see this link for the screenshot: http://prntscr.com/6qu59h). When I click on the search parameters and Adobe cloud icon, I see this (http://prntscr.com/6qu7w9) 94.75% of 20 MB.   Can you help me understand the difference in numbers?   Thank you.

  When you delete files (and folders) in the folder of Creative Cloud Files on your desktop objects are not immediately deleted but moved to the Archive (think Trash on Mac OS X or the Recycle Bin on Windows). The Archive is not on your computer, but in creative Cloud files storage.

  Open a browser and visit Adobe Creative Cloud. You can then permanently delete items from the Archive by [1] select the ones you want to remove and choosing Delete permanently, or [2] if you want to remove all simply choose an Archive empty.

  

• After Service Pack 2 low disk space alert

  
  

  • After installation with windows service pack 2 problems.
  • Windows Update service pack 2 Setup.

  * Title *.
  After installing service pack 2 the drive that contains the windows began to have insufficient disk space, next before installing it he had about 8 GB of free space, what is the problem?

  Hi Ayman Jean-Claude,

  1. you are running Windows vista on the computer?

  2. how much free disk space you have after install vista sp2?

  There is a possiblity that the Windows vista sp2 installation files are always available on the computer that occupies disk space.

  Free space on the disk can be stored by running the disk cleanup on the pilot tool and check.

  1. open Disk Cleanup by clicking the Start button, all programs, Accessories, clicking System Tools, and then click Disk Cleanup.

  2. in the Disk Cleanup Options dialog box, choose whether you want to clean your own files only or all files on the computer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. If the Disk Cleanup: drive selection dialog box appears, select the hard disk you want to clean, and then click OK.

  4. click the Disk Cleanup tab and select the check boxes for files that you want to remove.

  5. When you have finished select the files that you want to remove, click OK, and then click delete files to confirm the operation. Disk Cleanup on delete all unnecessary files from your computer.

   

  Learn how to install Windows Vista Service Pack 2 (SP2)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to exclude a page to report file drive "«not enough space"»

  Hello

  I am very new to vCOPs and still learning, so be ;-)

  On the alerts from my world page, I get a number of virtual machines that report "comments P:\ file system is saturated.  In this context, the P-drive are all disks that do not contain the pagefile and are usually almost full. Is it possible to exclude only P-readers but not the C, D, E-readers?

  Gabrié

  I would say no: all detected partitions on VMware Tools will be mapped as an instance in the metric of "file system of comments. You can assign a different profile of on - or simply ignore the individual instances.

  I think that you can simply ignore these (or better: remove them for a year). Over time, VCOPS will learn that these full P: disks are normal. In addition, depending on your environment, don't expect not that your volume of alert should be 0. My team only checks 'infra' critical alerts (host, cluster, vcenter), another team check things like disk space full or large amount of anomalies.

• NB200 - Win XP - change of volumes on partitions

  Currently, the volume allocated to the drive C: and D: as is 80 GB and 80 GB. HARD drive recovery disk does not have the possibility to allocate the volumes in a different way.

  What are the possibilities (I would have preferred a TOSHIBA utility) to allocate volumes for readers, as I don't see a point of having 80 GB for the system C: drive, for which, I believe, 40 GB should be enough absolutely.

  All advice is appreciated.

  Before partitioning, don't forget to make a backup of recovery if did not. To allocate different volumes, you can create administrative tools and format the partitions. However. I prefer to use Paragon repair Magic to allocate the volume space. In this program, you must choose to redistribute free option space affect the size of the best volume.
  One last thing, make a backup of important data if you have before the partitioning.

• Enable all alerts in the world?

  Hello
  Is it possible to activate all created alerts?  I have a disk space alert that fires correctly, but then if I reboot my server HQ he is more listed in "recent alerts.  Also, I'll make the widespread server upgrades that will require some downtime and I'll probably just disable most of the alerts.
  
  Is it possible to just say 'I want each alert configured in central administration is enabled = yes'?
  
  Thank you
  
  Josh

  Hi Josh,.

  There is a discussion about this already:

  http://communities.VMware.com/message/1915096#1915096

  As for being able to better navigate in the alerts (there was a lot
  different applications for this), we rely on the design of an alert
  Center, where you can manage and view alerts easier.

  In order to better manage the list of recipients, you must make use of the
  patterns of climbing.  Can be combined with a diet of climbing
  multiple alert definitions and you can change the schema of climbing
  who use it to affect all alert definitions.

  Charles

  On 30 March 2007, at 11:10, Josh Jondle wrote:

  > Also, is there a way to simply enumerate all alerts on the server?  I need
  > to bring a change to the list of recipients alert all alone and it would be
  > much easier if I could just make a big list instead of having
  > drone through each item to see if there's an alert defined on it.
  >
  >
  > Thank you,
  >
  > Josh
  >

• Monitoring of growth of database vCOPs

  Suppose I have start my installation vCOps with standard disk of two virtual disks of 12 GB and 200 GB configuration.  What is the standard way of tracking when it fills up so I can plan add a virtual disc until it is full?  I need to plan a failure to add a virtual disk and have enough time for a change of control, etc.

  Thank you

  The alert was launched in 15% free. Cleaning is about 10%.

  You can improve your response by creating an alert that is - recurring - for the Administrative alert > system subtypes. This recurring alert will not let you forget.

  In addition, you can add a KPI_HT for disk space on the UI/analytical volumes to alert you only when<15% free...="" this="" can="" be="" done="" at="" the="" vm="" level="" or="" leverage="" the="" vc="" ops="" application="" container="" and="" alert="" from="">

• Can't hear sound

  Recently, I bought apple sports watch. I have it synced with my iphone 6splus. But I can not hear sounds when I get TEXT messages or call on either my iPhone or Apple Watch. Please let me know how to solve. Thank you.

  Hello

  Check your settings:

  • On your iPhone, in the application of the watch, go to: Watch My > sounds & Haptics:
    • Make sure that the Volume of alert is to the Center or right;
    • Ensure that Silent Mode is not enabled;
    • Check that the haptic strength is set to the middle or right of the cursor.
  • On your iPhone, in the application of the watch, go to: Watch My > Messages:
    • Perhaps choose Custom and check - under alerts - which show alerts, sounds and Haptic each are enabled.
  • On your iPhone, in the application of the watch, go to: Watch My > phone:
    • Perhaps choose 'custom' and verify that all desired changes options are enabled, including Haptic and sound under the title of the ringtone.
  • On your watch:
    • When displaying the hour, make slide up on the dial of the watch, drag left/right to the gaze of settings > check that do not disturb is not activated (the button with the icon of the Moon).

• Need driver sound XP Equium L20-197

  Hello world

  I have audio problem and I can not solve this problem, I've tired several times.
  I downloaded the Toshiba.com sound card driver (conexant audio driver) but I do not see the volume control panel when I click on the small icon of teskbar also my microphone does not work.

  My model of laptop TOSHIBA EQUIUM L20-197

  any help will be appreciated, thanks

  Hello

  Are you sure that need the sound driver?
  Maybe some settings are not enabled in the--> sound & audio devices Control Panel
  If you want to get the volume control in the taskbar then you must activate this in sound & audio devices-> Volume tab-> check the option called icon volume space in the taskbar

  However, the audio driver may be downloaded here:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Best regards

• Question about Equallogic snapshots.

  Hello forum

  I could not confirm this, but instant never need to commit anything to the basic volume?

  Lets say I have 10 snapshots and delete the oldest? There will be a load of e/s to validate these instant changes?

  Also, if someone could point me to any type of indepth explanation of this technique of snapshot, I would be interested to read all that.

  Thank you!

  N ° current data are already on the base volume.  There is nothing to commit.   Only if you are completely restoring a volume from a snapshot will be there in writing for the base volume.

  On the site of Equallogic Support KB:

  Solution title TABLE: how the snapshot reserve space is allocated and used

  Solution details Snapshot Reserve Allocation and use

  -------------------------------------

  In a series group PS, snapshots can protect against errors, of a volume

  virus or the database. A cliché represents the content of a volume

  at the time you created the snapshot. Creating a snapshot does not disturb

  access to the volume, and the snapshot is instantly available allowed

  iSCSI initiators.

  Before you can create snapshots for a volume, you must allocate space (called

  snapshot pool) for snapshots. You set the value of the snapshot reserve

  When you create or modify a volume. Snapshot reserve benefits from the same

  as the volume of the pool data.

  When snapshot data consume entire supply snapshot, the Group remove is

  the oldest snapshots to free up space for new images or sets the volume and

  snapshots offline, according to the policy you selected for instant recovery

  space.

  The functionality for creating snapshots is called hybrid allocate when writing.

  Operation of sharing and snapshot of the page

  -----------------------------------

  A PS Series Group organizes the physical storage into logical segments called pages.

  Each page is composed of several logical blocks. This is similar to the way file

  systems combine areas of physical disk in 'clusters' or 'chunks '. Each page has

  a reference count which records the number of volumes and snapshots that share

  the page.

  When you create a volume, the group creates an internal table, called the volume

  table, which contains pointers to pages that use the volume. When you create

  a snapshot of a volume, the group creates a snapshot table by making a copy of

  the volume table, which is usually an operation in memory that the Group

  run in a transactional manner. For each page of volume in use, the support group increases the

  reference count to indicate that the volume and the snapshot share page.

  Because the group does not move or copy the data or allocates a new pages, photos

  are fast and efficient.

  Reserve of the snapshot stores the differences between the data on the volume and snapshot data

  (in addition to differences between the data of multiple snapshots). When you

  first create a snapshot, the page for the volume and the snapshot tables are

  In brief identical copies and the snapshot consumes no snapshot

  reserve. A reading of the same logical block of the volume application or the

  snapshot returns the same data because the application is reading from the same page.

  However, if you write a page that has a volume and a snapshot of share, snapshot

  reserve is consumed.

  Here's a simplified example of a snapshot operation. In general, no.

  additional I/o operations are needed to manage the data volume or snapshot.

  However, other internal operations can occur due to virtualization and

  data balancing on berries of the PS Series.

  If an application performs a write to 8 KB for a volume containing a snapshot, the

  Group:

  1. determine what page is modified by the write operation.

  2 - If the page is not shared, writes the data to the page.

  3. If the page is shared:

  . (a) allocates a new page of disk space and reduces the instant to reserve

  . the volume of a single page.

  . (b) update the page of volume table to point to the newly allocated page.

  . (c) mark the newly allocated page as having new data on the volume and the references of the

  . original page for unchanged data.

  . (d) writes the data to the new page.

  When writing is complete, if you read the data on the volume, you have access to the

  new page and new data. However, if you read the same logical block of the

  Instant, you get the original data, because the snapshot will always point towards the

  original page. Similarly, if you set a snapshot online, write to the snapshot.

  feature hybrid write protects the original data volume by allocating

  a new page for the new snapshot data.

  Only the first page of writing to a volume shared (or snapshot) consumes additional

  snapshot reserve. Each subsequent entry is considered identical to a writing on a

  non-shared the page because the original data are already protected.

  Functionality similar to hybrid allocate when writing is used in cloning operations.

  However, unlike when you create a snapshot, cloning a volume immediately

  consumes space additional group. If a clone is moved to another pool, data

  is copied during the operation of moving pool.

  Restoring a Volume from a snapshot

  ----------------------------------

  Because of the layout table, restore a volume from a snapshot is very

  quick. First of all, the group automatically creates a snapshot of the volume by copying

  the volume table to a new table of snapshot. Then the Group transposes the page tables

  the volume and the snapshot you selected for the restore operation. NO.

  additional space is required, and no data is moved.

  Deletion of Volumes and Snapshots

  ------------------------------

  Because volumes and snapshots to share pages, if you delete a volume, you

  automatically remove all the clichés associated with the volume.

  You can manually delete snapshots (for example, if you need more of)

  snapshot data). In addition, the group can delete snapshots automatically in the

  following situations:

  1 - failure instant free reserve. If the snapshot data consume the snapshot

  . reserve, the group either deletes the oldest snapshots to free up space for new

  . snapshots or sets the volume and snapshots in offline mode, according to the policy

  . you have chosen for the snapshot space recovery.

  2 - maximum number of snapshots, created from an agreed timetable. If you set up a

  . timetable for the creation of snapshots, you can specify the maximum number of

  . photos you want to keep. Once the program creates the maximum number

  . clichés, the group will delete the oldest snapshot for planning

  . to create a new snapshot.

  Snapshot are deleted in the background queue. The group travels

  the snapshot page table and decremented the reference count on every shared page.

  Any page that has a zero reference count is released into free space. Pages

  with a zero reference count are not released because they are shared with

  the volume or other snapshots.

  Because stereotypes can be automatically deleted, if you want to keep the

  given to a snapshot, you can clone the snapshot.

  Reserve snapshots use agreement

  ------------------------------------

  The snapshot reserve is consumed only if you write a shared volume or snapshot

  page. However, it is difficult to establish a correlation between the amount of data written in one

  volume (or snapshot) with the amount of instant reserve consumed as a result.

  especially if you have multiple snapshots.

  Because the pages consist of several logical blocks, size e/s and distribution

  volume merge affect overall performance of e/s in addition to the snapshot

  reserve its use.

  For example, do much written about a narrow range of logical blocks in a volume

  consumes a relatively low amount of reserve of the snapshot. This is because as Scripture

  the same logic block more than once, does not require not additional snapshot

  reserve.

  However, doing random number wrote a range of logical blocks in a

  volume can consume a large amount of reserve of the snapshot, because many other

  pages are affected.

  In general, use instant reserve depends on the following:

  1. number of entries that occur in the volume (or snapshot) and at least one

  . snapshot exists. In general, more Scriptures tend to use more snapshot reserve.

  . Although multiple writes to the same logical block do not require additional

  . space.

  2 - the range of logical blocks, on which occur the Scriptures. Written in a wide range of

  . logical blocks tend to use more instant reserve written in a narrow

  . rank, because more of the written word are to different pages.

  3. number of snapshots of the volume and timing of the write operations. Most

  . snapshots that you create more snapshot reserve is necessary, unless there is

  . few entries on the volume or snapshots.

  4 - age of snapshot. Snapshots older tend to consume more snapshot reserve only

  . the clichés of recent because the group must retain the original data for a

  . longer time.

  Design Snapshot reserve

  -----------------------

  You cannot create snapshots until you book instant space. Snapshot reserve

  is set as a percentage of the reserve volume (space) for the

  volume.

  When you create a volume, by default, the volume uses instant group-wide

  reserve adjustment. (The reserve in the scale default setting is 100%. You

  can change this default value.) You can change the reserve snapshot setting when you

  create a volume or later, even if the volume is in use.

  Although the snapshot reserve is not used until the volume or writing snapshot occur, it

  is consumed immediately free pool space. For example, if you create a

  fully allocated (not thin provisioned) 200 GB volume and specify a snapshot of 50%

  pool of reserve, free space is immediately reduced to 300 GB (200 GB for the volume

  reserve and 100 GB for Snap reserve), even if there are no pages in use.

  Therefore, before you create a volume, you should consider how many snapshot

  reserves, if any, to assign to the volume. The reserve of the snapshot set to zero (0)

  If you do not want to create snapshots.

  The optimal size of the snapshot reserve depends on the amount and type of

  changes in the volume and the number of shots you want to keep.

  By example, if you set the snapshot reserve 100%, and then create a snapshot.

  You can write to each byte of the volume without missing snapshot

  reserve. However, if you create another snapshot and then write in each byte of

  the volume, the first snapshot is deleted in disk space available for the new snapshot. If

  you set the instant reserve at 200%, there would be a sufficient reserve of snapshot

  for the two snapshots.

  A very conservative strategy in terms of instant reserve sizing is to put the snapshot

  book value at 100 times the number of shots you want to keep. This

  guarantees that keep you at least the number of snapshots, regardless of the

  the number of entries on the volume. However, this strategy is generally allocates

  book an excessive amount of snapshot, because that rarely crush you all the

  the data in a volume during the lifetime of a snapshot.

  The best way to instant size reserves is to assign an initial value to the reserve

  and watch how instant you can keep over a period of time specified under a

  normal workload. If you use tables to create snapshots, allow the

  calendar of work for several days.

  To get an initial value for a snapshot reserve volume, you must estimate

  the quantity and the type of entries in volume and the number of snapshots, you want

  keep. For example:

  -If you wait a few Scriptures or writings which are concentrated in a narrow range

  . logical blocks and you want to keep only a few shots, start with a value

  . 30%.

  -If you wait several entries or entries that are random in a wide range of

  . logical blocks and you want to keep more than a few shots, start with a value

  . 100%.

  If the snapshots are deleted until you reach the desired number of snapshots,

  increase the percentage of snapshot reserve. If you reach the desired number

  shots without consuming much of the instant free reserve, decrease the

  percentage of reserve snapshot. Continue to follow instant reserve and

  adjustments as needed.

  How Thin Provisioning button Snapshot Reserve

  ----------------------------------------------

  The snapshot reserve is based on a percentage of volume reserve (allocated space

  a volume). For a volume fully provisioned, the reserve volume is equal to the

  stated volume size. However, a thin volume put into service, the volume of reserve

  is initially very inferior to the reported size (default is subject to minimum volume

  10% of the reported size) and increases as the written volume occur.

  If you change a thin volume supplied in a volume fully provisioned, the

  amount of reserved snapshot increases automatically, because the volume of reserve

  increase in the size of the stated volume.

  If you change a volume of fully provisioned to thin-provisioned, the amount of

  snapshot of reserve decreases automatically, because the volume of reserve declines.

  However, if the snapshot resulting reserves will be too small to store all the

  existing snapshots, the group will automatically increase the instant reserve

  percentage of value that preserves all existing snapshots.

  Reducing the use of instant reserve

  -------------------------------

  Over time, you can reduce the use of instant reserve by periodically (for example,

  Once a month) defragmentation of databases and file systems. Defrag operations

  try to consolidate segments of files in a volume and, consequently, to reduce the scope

  logical blocks addresses used in the pages of the volume.

  Defragment the data read operations from one place and then write data to a new

  location. So increased use of instant reserve during and immediately

  after defragmentation, because existing snapshots will use more of the usual

  amount of the snapshot reserve. However, snapshots created after defragmentation

  operation must use less instant reserve, because the data on the volume are more contiguous.

  When a volume is highly fragmented, potential reduction of the snapshot reserve

  use can be dramatic, especially after removing the large before you defragment

  snapshots. Defrag operations can also reduce the I/O load on the group,

  because the contiguous data makes more efficient i/o operations, in order to improve the

  e/s overall performance.

  Latest defragmenters are good to reduce the fragmentation that is not seeking to be

  too thorough. Some defragmenters also try to combine the inactive data

  further restricting the likelihood of changes to shared pages. However, are not

  Defragment too frequently.

  Sector alignment may also affect the use of snapshot of the space, especially in

  larger volumes. File systems must be correctly aligned with the sector. It comes

  described in technical reports for VMware and Windows environments.

• Change of external hard drive read only to read & write

  Windows 7 64 bit - I have a drive external hard usb with a normal status of reading & writing. However, he has now suddenly become read-only. I don't know what I did to make it. Can someone tell me how I can reverse this situation back to read & write?

  It does not explain how he got in this State, but you must use Diskpart to remove or set state single reading on a drive.

  This process used to clear read only status on a disc. Commands typed are in bold:

  Microsoft DiskPart version 6.0.6002
  Copyright (C) 1999-2007 Microsoft Corporation.
  On the computer: DELL755

  DISKPART > list disk

  Disc # status size free Dyn Gpt
  --------  ----------  -------  -------  ---  ---
  Disk 0 online 233 GB 0 B
  Online disc 1 112 GB 0 B

  DISKPART > select disk 1

  Disc 1 is now the selected disk.

  DISKPART > list volume

  Volume # Ltr Label Fs Type size status Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
  Volume 0 D DVD - ROM 0 B no media
  Volume 1 C NTFS Partition system healthy 233 GB
  Volume 2 E 112 GB of Partition FAT32 healthy Untitled

  DISKPART > select volume 2

  Volume 2 is the selected volume.

  DISKPART > detail disk

  Maxtor OneTouch III USB Device
  Disc ID: BA52D44C
  Type: USB
  Bus: 0
  Target: 0
  LUN ID: 0
  Read-only: Yes
  Boot disk: No.
  Disk swap file: No.
  Disk hibernation file: No.
  Crash dump disk: No.

  Volume # Ltr Label Fs Type size status Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
  * Volume 2 E 112 GB of Partition FAT32 healthy Untitled

  DISKPART > detail volume

  Disc # status size free Dyn Gpt
  --------  ----------  -------  -------  ---  ---
  * Disk 1 online 112 GB 0 B

  Read-only: Yes
  Hidden: No.
  No default drive letter: No.
  Shadow copy: No.
  Disassembled: No.
  BitLocker encrypted: No.

  Volume capacity: 112 GB
  Free volume space: 75 GB

  DISKPART > attr disk clear readonly

  Attributes of the disk successfully cleared.

  DISKPART > attr volume clear readonly

  Attributes volume successfully cleared.

  DISKPART > detail disk

  Maxtor OneTouch III USB Device
  Disc ID: BA52D44C
  Type: USB
  Bus: 0
  Target: 0
  LUN ID: 0
  Read-only: No.
  Boot disk: No.
  Disk swap file: No.
  Disk hibernation file: No.
  Crash dump disk: No.

  Volume # Ltr Label Fs Type size status Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
  * Volume 2 E 112 GB of Partition FAT32 healthy Untitled

  DISKPART > detail volume

  Disc # status size free Dyn Gpt
  --------  ----------  -------  -------  ---  ---
  * Disk 1 online 112 GB 0 B

  Read-only: No.
  Hidden: No.
  No default drive letter: No.
  Shadow copy: No.
  Disassembled: No.
  BitLocker encrypted: No.

  Volume capacity: 112 GB
  Free volume space: 75 GB

  DISKPART >

  You will need to remove the read-only disk State before you can remove the read only status of volume