screen/blacklight iPhone problem 6
Hello
I have an iPhone 6, it's a refurb of the Apple Store in Sheffield (Meadowhall) that my previous had a software problem. I had about 9 months.
I dropped a few months ago and cracked the screen slightly however I used it without a problem since, earlier I was selecting a photo to upload to Facebook on the app and my screen went black, I thought that the app crashed so I did a hard reset (button home + lock) and the phone does not seem to come back. The phone came back and the screen was completely responsive but not on.
I took outside and noticed that in the light of the Sun, the screen was visible, it's also appears if you shine a torch top. I took it to a phone store to have the screen replaced, they tried 3 screens and none of them solved the problem. Anyone know what this could be?
Drop the phone must have damaged some other pieces of hardware inside the phone.
But, if the 'phone shop' was not approved by Apple for service phone, Apple or an Apple authorized Service provider won't do much either.
In this case, you will have to hope that a 3rd party repair shop can find the problem.
Tags: iPhone
Similar Questions
-
Hello!!!
IM Apple Fan.
Purchased IM Ipad2, Ipad4, Iphone6
Last month I already buy s Iphone6 +.
Today I feel unhappy
MY IPHONE 6 'history '.
My touch screen has a problem after downloading the IOS 9.0.2.
Already called and try apple advises the steps. But the problem still occur.
Already done restart of strength. Factory setting Reset also possible. But still the same problem.
Only can be used for a minute. After that... The problem comes in again & again & again...
APPLE.COM
Can U help me
Only products of Apple of love before updating the version 9.0.2
iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.
-
Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.
These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.
Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu
> options > advanced > General
. -
Is it normal that the screen SE iPhone packed between the vibration switch and the positive volume button?
If it was the impact, where the screen would break. It is normal for a screen to break at the point of impact.
-
What is the best protector of screen for iPhone 6 s Please?
What is the best protector of screen for iPhone 6 s Please?
Anyone who has a type of glass
-
MacBook Pro screen re-recurring problem.
In November 2015, I got a replacement of the screen as my Mac anti-glare treatment wears.
Just one month later, replaced screen got weak horizontal gray bands that goes further, from right to left, I got a replacement of the screen before the end of 2015.
Now, the March 2016, I had some stripes of vertical pixels affected when I apply pressure on the screen. How can I fix?
Just in case you are wondering this odd task between the two, it is the slider. I want to show that the screen has some problems with it, so I place my cursor here to show that this isn't where the screen ends.
It is a hardware problem with no software solution. It will require a replacement.
You have not identified the EXACT MBP model you have and perhaps with the display problem, it could come under this replacement program. Read this link.
https://www.Apple.com/support/MacBookPro-videoissues/
Ciao.
-
Original title: when I turn on the computer.
the screen shows "a problem has been detected and windows has shut down to avoid damaging your computor.
Hi Cjdaniello,
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Step 1: Start in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
I hope this helps.
-
You have an another "Black Screen of Death" problem on Vista 64-bit.
You have an another "Black Screen of Death" problem on Vista 64-bit. I downloaded and burned the CD to repair, and it loads fine. However, whenever I go into the options, it is not read my C: drive. It will not restore the system, it cannot run a "Startup Repair" and if I go in the "Command Prompt" and type "C:", it says that the device is not ready, so I can't change the registry to attempt to repair. Am I missing something that I need to do first in "Setup"? Note that without the disc, I go straight to the black screen with cursor. I can't go in Mode safe, I can't perform sticky keys, and I can't do anything else.
Any help here?
Hi AaronTom,
1. you remember to make changes to the computer, after which the issue started?
I suggest that you contact the manufacturer of the system for a Windows Vista DVD, and then try to perform a startup repair using it:
-
Blue screen errors the problem points to the files Volsnap.sys or Classpnp.sys.
Last month, I had a series of blue screens. The problem points to the files Volsnap.sys or Classpnp.sys.
I have a Dell Precision T3500, running 64-bit Windows 7 Prof. The system is configured with RAID.
Sometimes rebooting the system in the middle of the night and sometimes it freezes while I work on that. It is during the night to safeguard and Virus scanning using Trend Micro, which is the only type of trainer of spam on the system.
No idea on how to stop this would be really appreciated! Thank you
Hello
Results verified BlueScreenView WinDBG / DumpCHK.
make these problems worse. Uninstall it and run the removal tool to prevent
remains of troublecausing. The following recommendations to use during the test,
even better all the time.TrendMicro removal tool
http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspxList of tools to clean/uninstall anti-malware programs
http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/------------------------------------------------------------
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
Operation of the network.Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 6.x and 4.8 x
Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.==========================================================
The Bug_Checks were D1 (19 long happened if he should really
do not be in the mix) and CAUSE volsnap.sys classpnp.sys which are
Components of Windows, which means something else led in error.1. Uninstall TrendMicro as it has a role - is not enough to just disable
such that it will still load chunks of itself in memory.2 Volsnap.sys is the Windows volume shadow copy driver and disk problems
or other corruption could be at stake. Classpnp.sys is the SCSI class system
dll checking and disk problems will affect the it. Run SFC/scannow, and then
Checkdisk (chkdsk /f r).Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html=========================================================
Other troubleshooting methods:
BCCode: D1 0x000000D1
Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
from sleep or standby extended: "STOP: 0x000000D1".
http://support.Microsoft.com/kb/978982Stop error on a computer based on Windows Server 2008 R2 or Windows 7 during operation
system uses a storport virtual miniport driver to save a dump file or a file of hibernation: "0x000000D1.
http://support.Microsoft.com/kb/2320550Those 7 other KB Articles are available
http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000D1&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10--------------------------------------------------
Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
If necessary.Cause
A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.
This bug check is usually caused by drivers who used a wrong address.
If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:
- The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
- The function call was made to a function in another pilot, and that this driver has been unloaded.
- The function was called by using a function pointer that was an invalid pointer.
BCCode: d1 0x000000d1<-- read="" this="">-->
* 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-=========================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
-
IPhone update (but an old having problems with the screen Activate iPhone and Apple ID)
I have an iPhone 5 that, by chance (Pocket escaped), is stuck on the screen of the iPhone 'Find your phone' Activate. The iPhone does not accept my Apple ID. He is looking for an address icloud.com. I can't honestly remember a set up, and I tried a number of variations on the icloud.com address (using the 'index' system provides) and passwords with no luck. Do not have any problems with my Apple ID - I can see my phone & details on my screen of the user, when I connect my account (via the office). Subject to my cellular service provider, I tried to force a restore on the phone via iTunes, but after that he asked me a few questions of initial Setup, I'm just at the "Activate iPhone" screen
To be honest, I was going to pick up a new phone this week anyway. My concern is now that I don't want to not suddenly faced with the same problem. This lock, I meet - is - this quite specific for the phone itself? If I get a 6 plus and use this Apple ID to activate it, I ask in trouble? I admit that I am a twit when it comes to activation codes, the Apple ID, SIM cards and others.
It was my first smartphone (+ 3 years now) and the installer was made by my employer, so strange things could happen at the beginning.
Thank you all for any help
If the implementation was made by your employer, they can put in something different from your Apple ID to find my iPhone. It also seems that if something was damaged in the fall. Who can contribute to the problem.
If, when you receive your new phone, you make sure you use your Apple ID to find my iPhone, you should have no problem.
-
128 Gb iPhone problem 7 with Focus/Light PhotoCamera
Hello world
I had a 7 128 GB iPhone with iOS 10.0.2
I have 2 different problems, and I would like to speak with you all.
All first with camera...
If I try to update manually on a dark point, and immediately, a glimmer of hope; at this point, all screen becomes dark.
Second thing...
I also have an iPhone more than 6 s and iOS 10 is much faster than the iPhone 7.
Whenever I close an application to return to the home screen; the animation is delay... I don't really understand how it is possible with this material.
With iPhone 6s more with same IOS (10.0.2) happen... is very fluid.
Simone
See the instructions in this link, under the heading "your photos are blurry or fuzzy":
Please come back and we all know if this was helpful. Good luck!
-
10 blue screen on iPhone iOS 5
I have blue screen in 1-2 seconds on my iPhone 5s by force to restart, then my phone starts as it should and works without any problem. Previous versions of iOS didn't have this bug. What is the problem?
Same here, I had no problem with ios 9.3.5 just updated to ios 10 with itunes I get the same thing on my iphone 5s and I restore factory default and no luck.
-
I bought my phone from apple about 2 years ago. 4 days ago, I noticed that this phone of mine started to get hotter than usual, so I removed my case and I discovered that my screen was between the body of the phone. I was on holiday in Germany and went to the apple store it and they told me since I was out of warranty, I would have to pay about 200 euros to get the screen fixed. I thought apple was supposed to fix for a cheaper price that there is nothing wrong woth the current screen, there is no scratches or dents, I've just wanted to place the screen to its normal position. I looked around and many people tell that apple has replaced and repaired therir phones for free because it is a common problem. So I was wondering what other options there are to fix this solution?
I suggest to take the phone to an Apple Store in your own country after your holiday. For reference only, in screen repair US prices are listed here: iPhone screen damage - official Apple Support\ if there is other damage, additional fees apply.
-
Recently, I had my iphone 6 replaced after cracking the screen and for the last two weeks the screen would just stop working while I was in the middle of writing a text message, I touch the screen several times and nothing happen, and sometimes after waiting a few minutes it would start just enter random apps without me touching the screen at all even calling a number in my phone book and with the screen on which I could not stop him. Sometimes if I reset the phone that he will return to the top ok and them let me use it again for a while and then same thing would happen again and again, I have restored from a backup phone, restored the phone as new and updated to the new 9.3 update but nothing seems to stop it. Anyone knows what do to solve this problem does not happen or should it go back for repair?
Take your device at the Apple Store for further diagnosis. Good luck.
-
Update to iOS 9.2.1 creating storage on the iPhone problems 6
I upgraded my iPhone 6 iOS 9.2.1 a few days ago. «Since then, a message of "storage" almost full keeps popping up on my screen all the minutes and whatsapp becomes unusable ("your iPhone is running low on storage.» So Whatsapp can continue to work correctly, up to 100 MB of space free by: 1 removing applications longer you use, 2 large delete videos from your camera roll, 3 manage your storage in the middle space > general > use > Storage manage). I did all the three things mentioned above. However, no matter how many applications or videos I remove, storage space remains the same: use - GB 11.6, available - 0 bytes. I can't possibly delete data on my phone without losing the essential information.
I backed up even my phone to my Macbook Eve, reset to the factory settings and then restored my old version back up on iTunes. The problem seems to have been resolved, and there were 4-5 GB of free space on my phone. The phone worked fine all day yesterday, but today the message 'almost complete storage' keeps popping up again and my applications have become unusable again. When I connect my phone to iTunes, it informs me that an upgrade to iOS 9.2.1 is available and asks me if I want to download the update. However, when I go into the settings and the "Software Update" from my phone, it says "iOS 9.2.1. Your software is up-to-date. I don't want to delete applications or data on my phone, more particularly when I still 4-5 GB of free space. What should I do?
Maybe you are looking for
-
Magic mouse not recognized not recognized as such
I buy a Magic Mouse for my MacBook Pro 2, but which is recognized as a normal mouse. I can only move and use the two bottons (scrolling and other functions does not work) I installed OS X Yosemite 10.10.5 after formatting. I never use another bluetoo
-
NB520 - black screen when the POST and Windows 8.1
Good afternoon! I'm in a strange problem.My netbook screen shows black during POST (Bios) and sometimes shows a few white lines, as interference. If I boot Windows OS 8.1 the problem persists.If I run Ubuntu, I can see everything normally. I looked o
-
Satellite P50T-B - speed WiFi problems
So recently I bought this computer from future shop.It has the Intel Dual Band Wireless AC-3160 inside.I normally play with it, for example (LoL). Wifi works but the problem is that when I'm really close comes as 21 Mbps. But when I go upstairs to my
-
Is satellite A100-797 - compatible with Windows 7?
Hi all I have a laptop Toshiba Satellite A100-797 and want to upgrade to Windows 7, it will be available. When I run the Windows 7 Upgrade Advisor, it shows me a few errors that make the upgrade is not possible. The following devices are incompatible
-
Support for triggers in PCI-6602 for counter input / output meter opearions