Screen goes black randomly while the computer is in use

Similar Questions

• Screen goes black randomly and the mouse resumed normal functions

  My screen started to be empty at random. It seems to do a quick fade to black as if the power manager is turn off the screen. The PC stops not is and shake the mouse he brings.

  I checked my video driver, malware, power settings (currently any screen power off or power off is disabled). Went to powercfg and checked last wake-up factor, but it does not list everything. If it's just a removal of the power management screen, not sure it would be listed here because it is not a full power down.

  Is there a way to tell if it is the power Division of the screen Manager and if so, what is the cause of do?

  I begin to suspect my keyboard although it's just a hunch. It's an old v1.0 MS Comfort Curve Keyboard 2000. Keys become a little sticky, although there is no any button power on this issue (like the old buttons suspend) and from the keyboard Manager, he was very much tied to her. According to me, it came with a mouse since I replaced it with a mouse Spawn CMStorm. Perhaps there is an intervention of the strange?

  Original title: off dead zone screen

  It doesn't seem to be a thermal problem of graphics card. Seems not be related to what application is running, or at room temperature and it seems to come back with the movement of the mouse (and stay off without moving the mouse) this is why I suspect something to do with power management.

  Any suggestions?

  It looks like the mouse driver or firmware causing trouble...

• iPhone 6 screen goes black randomly. Hard reboot solves the problem temporarily

  Hi all

  My iPhone 6 screen goes black randomly (usually during sleep) and when it happens, the fact response to touch or no sound. I know that the phone is on because I can always call another phone and it sounds on the line, but as I said the iPhone does not ring. Hard reboot (press home + power button for a while) will not solve the problem immediately after the restart, but after some time (hours or days), it goes black again and I have to do the same thing.

  No idea why this is happening? Is it a software or a hardware problem?  I'm really curious to know how to restart the phone resolves the problem.

  I am not able to take it to the bar of the kind of these days because of my busy schedule. I wonder what they need to replace when I take it to the store.

  Please, share your ideas.

  Thank you

  Sounds like a problem of software for me, especially because it forces is a troubleshooting step software, and you say that solved the problem (of least temporarily).

  However, I still think that the Genius Bar would be a good idea. They have access to diagnoses that are not accessible by the user, who can easily identify which applications or processes are causing the problem. I think that they can also do this by phone, but I rarely call support so I am not sure.

• Spectrum x 360: screen goes black randomly when on battery and some energy-saving options enabled

  Hello everyone,

  I bought this fantastic machine called spectrum x 360 and I love it.

  Unfortunately since the early days I'm facing what I think it's a problem of driver/software (not the related material).

  This problem only occurs when I'm on Windows, not in the bios or at the startup. JUST IN Windows envinroment, especially after the login, and when the computer was turned off. Sometimes when I use it after a while, randomly.
  This occurs only when the spectrum is on battery. The problem does not appear on AC adapter.

  Problem: the screen goes black randomly for a few seconds and then reappear, sometimes the entire image on the right slide and there is a part that looks like yellow and corrupt, then goes black and reappears.

  Windows Version: I'm on Windows Home 64 bit, build 14393.321 10 (update of the anniversary).

  The entire screen works fine for normal operations, no artifacts.

  Replication of the problem
  Initially, I was able to reproduce the problem with the driver build 4360 (which is the version of the driver from the HP site). Whenever I loaded the home page of youtube and the banner has started playing on the screen went black sistematicly.
  Then I updated the GPU driver through the Device Manager, which has improved my GPU driver to 21.20.16.4494, as of July 25, 2016 and the problem happens much more rarely.
  Now I am facing this problem again but Edge works correctly and is not the cause of the problem, it can appear even when I don't do anything with the PC.

  I noticed this problem appears when saving options are enabled for the Intel GPU (I'm trying to translate this to English because the GPU driver Panel is in Italian):
  
  -update panel houses;
  -advanced mode; energy saving
  
  If I disable these options, the problem does not appear or, better, for I've tested so far, he could not displayed when options are not in market, but I have not tested this very long to be sure.
  
  In my opinion, there is a bug in the display driver, or some customizations made by HP causes problems with the driver.
  The rest of the computer works correctly.
  Any idea to solve this problem? Or should I keep these options turned off power saving?

  Hi, thanks for your help.

  I have a passion for COMPUTING and ex-computer SCIENTIST, I am familiar in surveys on hardware/software questions and hope that this post will help some users get rid of this problem.
  Black screens and screen corruption has been issued by the option called "auto refresh Panel" energy saving.
  I did a lot of hours on battery (condition where this pop ups problem) in these days and the problem didn't show when it was turned off.
  To verify that I tried to activate "Panel options self-identity" in certain occasions and, at random, on the first boot of the machine (after being turned off) the problem arises again.
  It certainly is a problem with this energy-saving option.
  Now everything works fine.
  If the problem appears again, I will post more information.
  Thank you for your support.
  
  I think it would be useful to stick this post on top in this section of the forum, to be useful to other users and being more visible.

• screen goes black instead of the newspaper showing

  Hi, I had a problem enough. This has happened right after that I restarted my computer.

  Load Windows, but just like your so-called self connection, screen goes black, not market not to answer any type of order. The screen is not active, it's still reciving a signal, it shows just a black screen.

  So I thought just run in safe mode and restore the computer to a point a few days back, but as I try to load safe mode, it gets stuck on crcdisk.

  So I figure I would use the vista cd to check for errors. The cd loads but just as it is supposed to show "icons" that simply shows bakground, don't smile icons.

  I had a problem of smililair once, but then the computer started just after 5 min of blackscreen, at this time there, I figured a windows update to be the cause(not sure though) (I also did research of virus lying right there, but everything seemed fine).

  I don't know how, but I left my computer on for the night, showing just a black screen. But in the morning he show would screen checking disk errors, it was 100% complete and says it all was ok, but it got stuck on this screen.

  Advice, ideas, suggestions?

  Hello

  You can try the following steps and check:

  Step 1:

  Unplug all external devices and tries to boot into normal mode and check if the problem occurs.

  Step 2:

  Since you can not boot from an Installation of Vista disc for troubleshooting more away, you can try to boot from the system pre-installed on your computer recovery options and perform a startup repair. If that fails, then try a system restore and check.

  For more information, see the link:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Hope this information is useful.

• The screen goes black when I click and drag text, use the version on my 18.0.2. Thank you

  I'm entering text in the space of your question and click on a Word to drag it to another location, or if I am writing something in an email on gmail and click on a part of the text to drag it to another part of the text, the screen goes black as soon as I start to drag the text

  -Installing and re - install, it's what makes work - although I've still "hardware... use" unchecked.

• HP 2000 laptop screen goes black after entering the password

  After I enter password screen goes black

  Ok. I'm in the menu boot options. I have Manager ser of the OS startup. ERIC file boot. It says press F10 for BIOS Setup options, ESC to get out. What should I do?

• Screen goes black randomly

  The issue I'm having is that my Vaio VPCEE32FX Laptop screen keeps going black. However, I see a faint image on the screen if I shine a flashlight on the subject. Also, I can get the screen to return to normal if I press hard directly on the cell to the right of the track key (where you would have your right Palm while typing) while lifting the lower left corner of the laptop (kindof bending the laptop a bit). I heard that the inverter can fail however when I 'bend' the laptop to 'solve' the problem is far away where the inverter is. Could I have a loose fitting. Y at - it something near the pad mouse that could become loose. I check the hard drive and it is correctly fixed. Help, please!

  The issue I'm having is that my Vaio VPCEE32FX Laptop screen keeps going black. However, I see a faint image on the screen if I shine a flashlight on the subject. Also, I can get the screen to return to normal if I press hard directly on the cell to the right of the track key (where you would have your right Palm while typing) while lifting the lower left corner of the laptop (kindof bending the laptop a bit). I heard that the inverter can fail however when I 'bend' the laptop to 'solve' the problem is far away where the inverter is. Could I have a loose fitting. Y at - it something near the pad mouse that could become loose. I check the hard drive and it is correctly fixed. In addition, move the screen does nothing.

  Help, please!

• Screen goes black and only the mouse pointer visible to the windows xp screen

  My computer has used to work without problems.  Now, when I start it upward, to the Windows XP start screen, the screen turns off and all that is visible is the mouse pointer.  I tried to start safe mode, and it does give me even the option - not even if I press F8 at startup upward.  What is the problem with my computer and what can do?

  Thanks for your answers, Dena and Jojih.

  The screen went black and all I could see was the mouse pointer.  There is no ameioration or changes on the hardware of all kinds.  I wonder if one of my employees has a virus on the computer.  I could not do in safe mode, even if I tried to press F8.  If I put in the Windows XP CD, the screen would go black after that he loaded the system files, just like at the start of Windows XP.  So I used Acronis PC Backup and Recovery and make a recovery disc and used to reformat the hard drive and then I reinstalled Windows XP.  Everything has been great to work for.

• Satellite A135-S2276 screen goes black randomly

  I have a Satellite A135 everything will work, and then it goes just black sreen have not seen a boss just randomly sometimes his 30 minutes later sometimes immediately.
  I updated the drivers and also plugged in a dektop and it fined all work in this way, but always turned on the LCD screen.

  All the ideas we that this could be taken to a toshiba repair place and they said that the LCD or the right of the ups under neath the screen.

  Anyone have any ideas for this grace.

  Hi mate,

  Normally, you can get all the spare parts to an authorized service provider:
  http://www.CSD.Toshiba.com > locate a repair center

  Alternative as a boarder wrote that you can look on eBay for second hand parts. They are cheaper but not new. ;)

• XP installation - the screen goes black after downloading the files and Restart__Error Code 80096001

  Hello

  After the re-construction of my computer with
  a new card mother MSI (AMD Athlon II X 2 with 2 GB RAM DDR3 1066) and a new 500 GB hard drive and using only the edge graphics I can not finish installing Windows XP.

  Error code 80096001 you can see

   

  HERE (http://sites.google.com/site/jugracamsi/)

  some screenshots I took during the installation procedure. I have an original OEM licensed Windows XP CD with SP2 which I can install it easily on my old system.

  What's wrong?

   

   

  A quick google on the message final error "Setup could not install the product catalog" this product like the first:

  http://support.Microsoft.com/kb/823303

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• Locking of the blackBerry Smartphone screen/keyboard keeps activating while the phone is in use.

  I have a Blackberry 9810 "BOLD" and the screen/keyboard lock feature is always activate itself, even when I'm in the middle to send him a text or using the phone. Yesterday, it happened while I was talking on the phone and he cut the call. I can't find an option on my phone to activate switch. How can I solve this problem, because it's practically what makes my phone useless.

  Hello

  Well, first of all... No... no 'BB support' can answer you here. This is because, when they gave to you when you register on this site, this site has nothing to do with any formal support any. On the contrary, it is a community of users where volunteers try to troubleshoot other kind souls to the best of their ability. Unfortunately, no response would mean that anyone who took the time to read your post has something useful to you.

  From what you describe, I would infer that there is a wrong application behave which interferes with the function of locking, or maybe your operating system is somehow corrupted, or maybe a combination of the two. What I recommend is the following:

  1. Reload your own OS and as "skeleton" as possible (for example, whatever it is optional, let power off)
  2. If the problem immediately presented, then repeat step 1, but with an OS different package... maybe there's a bug in the specific operating system you run.
  3. If the problem does not immediately, then run for maybe a week-long enough to be sure that the behavior will not occur.
  4. If the behavior does not after a week, add just one thing (just one... no matter how tempting it is to add more!)
  5. Repeat steps 3 and 4 until the behavior is, how well do you know the culprit
  6. If the behavior does not, then you know that reloading the OS or switch to another operating system package was the cure.

  If none of this he healed, then you will have a physical hardware problem for which assessment in the hand by a qualified material is of course necessary. If you are under warranty, you seeking your warranty provider - normally your place of origin of the purchase, your provider of mobile service or one authorized service center (it varies by location, but you should have received the documentation at the front that tells you exactly how to use your warranty).

  Good luck!

• While playing the hidden haunts and a few other games on facebook, my screen goes black.

  Original title: Screen goes black

  While the hidden haunts game my screen goes black & I have to disable the cumputer that has happened for a few weeks now what can I do to make this stop? This game & a few others that I play are also on facebook

  Gameplay and loading problems are often times caused by the settings of the browser or the problems.  Following these steps may help resolve the problem:
  (1) make sure that your browser is up to date or try another browser (Google Chrome, Internet Explorer and Firefox are the most compatible).
  (2) make sure your Flash is updated (http://get.adobe.com/flashplayer/).
  (3) clear the cache of your browser (http://kb.iu.edu/data/ahic.html).
  (4) clear your cache Flash (http://www.simplehelp.net/2010/09/16/how-to-delete-your-flash-cache/). If you use Chrome, this can be done by ensuring that the ' delete cookies and other site and plugin data "is selected when you clear the cache of your browser.
  (5) restart your browser.
  (6) make sure that you have access to the game using a Facebook link and not a bookmark.
  If you have any problems, follow these steps, or if these steps do not work for you, you can contact directly the developers of Facebook games by clicking on the link "report or contact this app" at the bottom of the game screen.
  I hope this helps!

• My screen goes black, but is still on. My computer shuts down everything he does and I have to restart so that it become operational.

  I said the video card is corrupted or is overheating.
  The screen goes black randomly. Sometimes 2 minutes playing or until hours later. Sometimes it will not.

  Connect the computer to another monitor. If the problems are gone, replace the original monitor. If the problems persist, then you have hardware problems on your computer. You can troubleshoot the hardware yourself:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  This includes exchanging the video card for a well-known work.

  On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.
  MS - MVP - Elephant Boy computers - don't panic!

• Detect when the screen goes black (standby mode)

  Is there a way to do this?  OnObscured does not seem to be called, that makes sense.  I couldn't find anything on the forums about this.

  Thank you.

  Thank you guys.  In fact, I realized that onVisibilityChange is what I'm looking for.  It is called when the screen goes black and when the screen is popped.