Screen is blank when Qosmio G20 starts up

Similar Questions

• (Dell LCD) screen goes blank when I connect. Requires the switching on of the screen on and outside

  (Dell LCD) screen goes blank when I connect.  Requires power to the power on and off screen, at least 15 to 20 times before picture stays on.  Any suggestions? No to the problem site so don't have the model numbers.  Dell computer and about 8 years.

  Looks like your monitor is having problems sync-ing for the resolution settings that you have defined for your monitor.  When you get your screen is displayed, right-click on an empty area of your desktop-> properties-> (tab) settings.

  Then, in the 'Screen Resolution' area, try to move the cursor to the end of 'Less' and click 'apply '.  It will then try to change to this new resolution.  If your screen is empty for now, just wait about 30 seconds and it will return to the previous resolution (which can mean that you need to power cycle your monitor you have done to get it back)-otherwise accept the settings if your display looks OK.  Try to find a solution that works with your monitor.  It is also possible that your monitor is going bad.

  HTH,

  JW

• Computer is humming, fan turns on and the screen is blank when I start computer

  This problem happens every 90 days. When I took the computer to the repair shop, he had no problem with him right there.  If the computer remains stationary, the problem persists, but once it is moved in a certain way, it will start normally. Specifically, I spilled on the computer and the problem stopped.  I have a hard time to explain a problem to the repair shop when it no longer exists at the time wherever I have it get there. Is there a more permanent solution that mess up the computer?

  When I tried to turn on my computer, I get a buzzing sound, then the fan came and the screen remained blank.  I tried to restart after an hour, but it's the same, what's the problem? >

  Hello DempseyBullock,

  Sorry, you experience this problem.  The first thing I would say is contact the manufacturer of your computer.  Also, I suggest to go to the manufacturer's Web site to confirm that there is no news updates for the drivers, firmware, or BIOS updates.

  If you are unable to start your Windows XP-based computer, try the steps in the below links:

  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Thank you

  James

• Satellite Pro L850-1DV - screen is blank when inserting the USB

  Hi guys

  some help please.

  I recently bought a laptop from Sat Pro L850-1DV the following specification

  Core-i5 2.5 Ghz
  8 GB RAM
  Win7 64 bit with SP1
  video driver = 8.15.10.2752
  DirectX version 11.0

  The problem is that whenever I have insert a USB device, the screen is blank. I then need to move the
  mouse or tap a key to bring the screen... it's really boring.

  Please is - can anyone help as to why this happens, and please suggest a correction.

  Thank you

  Hmmm... never heard of it. It happens when you connect any type of external device via USB port? I just want to know if it is some kind of general problem.

  Using Win7 preinstalled original or your own version?

• Satellite A350-20 q - screen is blank when installing Fedora 11

  Hi all..

  A few months back, I bought a Toshiba Satellite A350-20 q. The problem is when I try to install Fedora 11 on this laptop. When I start using the bootable DVD and try to install, the screen turns off after that a check of the media is complete. There is no graphical interface for installation.

  However, he does very well and settled on a Satellite A300 and one laptop of another as well. What can be the problem?

  I tried the two variants for different architectures i386 and a x86_64. Same problem in the DVD. Please help :(

  Hello

  What happens if you install Windows or another Linux distro? Maybe Fedora 11 isn't compatible with your laptop and you get a blank screen.
  Check it!

  In addition, I agree with Akuma and you should try to update the BIOS and also reset to the default values.

• Portege M200: the screen is blank when you switch to Tablet mode

  Hello.

  Have a problem with my Portege M200 and after hours of searching for a solution, I'm still at a complete loss as to how to fix it.

  Essentially, when you attempt to switch to Tablet mode - or if I press the button cover closed 'sensor' on the far right, which is essentially the same thing: the screen goes black.

  This means that I can not in tablet mode at all.

  What happens across multiple operating systems and will happen even before that an operating system has started. Of course, I checked that when in Windows, the option "When I close the lid" is set to do nothing and I even checked for any cable setting in bios but saw nothing relevant.

  As far as I know this has only started happening since I sent it for repair with toshiba a month or two back (motherboard has been replaced I think).

  No way to control it via software or am I'm going to have to send it for repair again?

  > Like as far as I know that this has only started happening since I sent for repair with Toshiba a couple months back (motherboard has been replaced I think). Anyway to control this via software or am I'm going to have to send it for repair again?

  You description, it looks more like a hardware problem as a problem of software because this happens before an operating system has started. That's why I would exclude a software problem.

  In your case I would recommend you to contact the ASP again and explain the whole situation with your laptop.

  Good luck

• Re: Laptop wide screen goes blank when I watch videos online

  Hello

  Just bought a Toshiba Satelite laptop. I installed windows 7, 64-bit in the car. A works well apart from when I watch a video on sites like youtube it sometimes works for a bit, sometimes not at all and the screen goes black as it is turned off.

  The computer is still on, but it's just the screen is disabled and any buttons I press it remains empty, forcing me to shut the whole thing.
  I installed Internet Explorer 9 and also Adobe more recent flash player for 62 bit drivers. I'm so frustrated! No matter that I just can not read video online!

  Have you tested with different browsers?
  I recommend you to check this with chrome or firefox.

• External screen goes blank when I close the lid Satellite P100

  Hi all.
  I hope someone has an idea as to what is happening here.

  Sometimes I like to watch a dvd or use the center of the media on my HD TV. I use Windows Vista to make it.

  When I had XP installed, I close the lid of the laptop and watch them to my heart's content. Now with Vista, I need to have the lid open be able to watch on the external display. If I close to you then the external screen is empty, as if I unplugged the laptop.

  That makes me free! What worries me is burn-in screen, because the standby screen not turn on as I am watching video.

  Help! Someone! Anyone!

  AFAIK in Vista that you can use the same options as under WXp. check please supply option and you will find an option called when I close the lid. As option, choose no action.

  I think you should be able to close the lid while watching the movie on screen.

• Randomly, the screen is blank when the charger is connected; generally very well during the execution of a battery

  We have a Dell Inspiron 6400 laptop.  When the charger is connected the screen will become black suddenly, and you can't seem to get the screen goes again.  It does not seem to close completely because when I press the power button twice (or more?) it brings back me to the password screen.

  This only occurs when you run the battery, IE. not connected charger.  I bought a new charger thinking that was the problem, but the same thing with the new charger.

  My only thought is that it could be the battery but unwilling to spend £60 on a new if it does not solve the problem.  And also the battery OK charges when the laptop is not activated.

  Help needed please!  Thank you very much.

  Hi Tiffany - Sorry a very very late thank you for your help on this.

  I've been very busy and have therefore been put off watching it.  We have been surviving off the battery and when he runs out to paralyze the system / sleep mode and reload.  It became quite frustrating and that's why I've decided that I really need to fix this problem.

  As you the advised, I went just through the safe mode and the problem occurred again glancing at your advice it seems there must be a hardware problem.  I had originally bought a spare power outlet, and this does not work then maybe it's the battery.  As you suggested, maybe a qualified support store is the best solution now.

  Thank you once more!  I am very grateful.

• Screen goes blank when you plug an HDMI cable...

  When I connect my HDMI cable to my TV (Sony Bravia LCD), the TV does not respond to it and my computer (gateway T-1625) turns off screen. Y at - it all the parameters that I need to know before I plug in HDMI cable?

  Hi the wedges

  for vista right click on the desktop/customize/display parameters must be on option mirror and configure the size of the screen in there. or very similar if you have XP. can't give you anything more than all my vista want to do is open WMP.

  Have fun

• my screen is blank when I open Firefox

  have re - install 3 times

  Thank you. I got a message on YooNo doesn't not work with Firefox - disable it and Firefox screen returned.
  I'll keep your directions in case I need it. Happy new year!

• Re: Satellite A135-S2276 - does not start, the screen is blank

  I have a Toshiba Satellite A135-S2276, I bought 2 years ago. It worked fine except the clock which has never kept the exact time since I bought it. I turned it off Sunday night as I do regularly. But he could not turn it on Monday afternoon. The power light is not on when you turn it on, but primer. The light remains on but does nothing. The screen is blank when feeding it works.

  Can someone help me with the answer? Thank you

  Dennis

  It's hard to say what is happening to your knees. You can access Bios? Try to connect the external monitor and see (maybe the screen of the laptop disappeared)...

• Satellite P100 PSPA6A 028017 - screen is blank

  My screen goes blank when the Toshiba Manually Nvidia Geforce GO 7900 GS driver active and restarts and just a loop. I am able to use my laptop normally if I just disable the driver and leave it installed. I tried to update the driver, but the problem is not resolved. I reinstalled the bios and chipset and the driver itsself. The problem continues to poison me ideas please?

  What Os do you run on your laptop? Uninstall the display driver, and then restart the computer. Then, clean the registry with Ccleaner http://www.piriform.com/ccleaner

  go to the [Australian driver Toshiba Page | http://www.mytoshiba.com.au/support] and download the driver again.

  If is not always fix this, there may be Os related issue.

  You can also try a program called, Driver Sweeper, to remove the nvidia display driver and reinstall a driver to display again

  http://downloads.Guru3D.com/downloadget.php?id=1655&file=7&EVP=c14f9f3787877ee f9ef4b235b9146e96

• Qosmio G20 has white LCD diplsay. OK when it is used with screen external en

  I hope someone can help. Qosmio G20 has full white LCD.
  The backlamps are on and the laptopworks fine when used with screen external fr.
  I guess it's probably the motherboard, any ideas?

  Most people would say that if it worked, say, a couple of days and you can't even start on your LCD screen, then the screen or its cable or mobo circuit feeding the LCD failed.

  I had this on another laptop too, and Toshiba are not something so special that this kind of thing is not generally a valid diagnosis.

• Qosmio G20 - error TOS0002 when starting

  Hello people, help please if you can.

  Spin a Qosmio G20 (PQG21E)

  Have just re installed windows XP Recovery disk ME, (system crashes earlier), when re-startup error TOS0002 appears.

  Have been through the process of Winhex, as described in a previous thread, but is not no matter what diference.

  Here is the twist. If I boot with the recovery disk in and do not press any button, after a message ntldr failed the system starts fine.

  Can we get out there give me a solution to this very annoying problem, am at my wits end?

  Hi John

  From my personal experience, I know that the Qosmio G20 supports RAID functionality.
  Different RAID settings can be changed in the BIOS.

  In my opinion, you should check whether the RAID settings are on 1RAID-0 or / and RAID-1

  Sometimes the bad RAID don t parameters allow to install the operating system or cause strange error messages.

  Best regards