Screens are crashing and blue!

Similar Questions

• screen of Aqua and blue font. Cannot read.

  The help screens, the screens of Bank and others appear with a background clear aqua and blue font. Some emails, too. Why? I right click and drag to read the characters.

  Hi JoValatka,
   
  -Do you remember recent changes to your computer (like changing the theme or wallpaper etc.) after which this issue began to occur?
   
  -Have you downloaded any third party themes, wallpapers etc?
   
  Check if the Aero feature has been turned on. For more information, see the article below:
  Solve problems with Windows Aero

• M400 screen/computer crashes and the fan is palpable... reboot is the only option

  Randomly my [Toshiba Portege M400-S5032 | http://reviews.cnet.com/laptops/toshiba-portege-m400-s5032/4505-3121_7-32329282.html] crashes and the fan starts running fast. [Cnt-Alt-Del does not work and the only way out is pressed the power button until there is a shut down | http://forum.notebookreview.com/toshiba/224709-toshiba-u205-lock-up-problem.html#post3454972]. Increases the frequency of this problem as the age of the laptop. I opened the computer to make sure that there is no dust or debris inside and I [removed the stickers from the bottom of the laptop | http://cxliv.org/2008/06/09/toshiba_u205-s5034_lock-up_problem.php] or less perforated holes in the stickers. [Other people have the same problem | http://reviews.cnet.com/laptops/toshiba-portege-m400/4864-3121_7-31729265-7.html?tag=userReviews;summaryList]. Some [think that Frost is caused by movement | http://www.fixya.com/support/t2758501-machine_freezes_up_needs_hard_boot], but [others think that it is only because software | http://laptopforums.toshiba.com/t5/General-Technology/Portege-M400-Problems/td-p/24729].

  * Does anyone have a solution? *

  Hello

  What version of BIOS your M400 installed?

  Test the RAM for problems using the Memtest CD of www.memtest.org

  And update the drivers (fingerprints, display, sound etc...).

• Satellite Pro L510 - crashes and blue screen

  Hello
  I am a new user of the Toshiba Satellite Pro L510, since last September, barely 3 months.
  Recently, had met 2 crashes (2nd is today s). As it happened today, there are blue screen that appears, which included messages like 'crash', 'written' physical memory... etc.

  In addition to send it for repair for this new laptop, I don't know what is the best way to manage this accident and what might be the best way to prevent this accident.

  Recently I installed programs such as Microsoft SQL Server 2008, anti-virus program (Sophos), which I think are necessary (the first was for my studies as well).

  Would appreciate any pointers to advise me if these could be the causes of the accident, and that I have to do to keep the better laptop or y at - it any generic deficiency maybe I should take notes.

  Thanks in advance for any advice for this laptop.
  Kind regards

  Hey,.

  First of all, I must say it is very difficult to say whether this problem is software or hardware related, but in most cases these accidents are caused by software or drivers...

  I put t know how many programs you have installed, what OS you use and if there are compatibility problems, but you can test it yourself: Toshiba start recovery disc recovery facility. After that, you have the same settings that you have purchased.

  You should examine it a little these parameters. If everything is ok, it was just a problem software or driver. ;)

• conmputer crashes and blue screen appears and the computer restarts

  my computer guard crash blue screen appears and then the computer restarts, reinstalled windows xp and the problem persists

  If you reinstalled Windows, then you can be sure that it is hardware related.

  The three most likely culprits are the processor, graphics or RAM card. Unfortunately exactly identify the problem will always be tricky unless you have access to the spare parts that you can switch to turn.
  Neil
  www.nwarwick.co.UK

• Receiving intermittent crashes and blue screens

  Original title: blue screen of death

  I built my computer and have intermittent crashes/blue receintly screens.

  When I boot back I get this error message:

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  More information about the problem:

  BCCode: 1a

  BCP1: 0000000000041201

  BCP2: FFFFF68000007000

  BCP3: 95A000300E17F847

  BCP4: FFFFFA80043101A0

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 256_1

  He tells me to check the for more info .dmp file, but I can't open the file.

  Hello

  For information on using BlueScreenView and MyEventViewer to troubleshoot Bluescreens see methods
  stated in this thread - top 3 responses.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  -------------------------------------------------------------

  List of crash - created using BlueScreenView

  Dump File	Crash Time	Bug Check String	Bug check code	Parameter 1	Parameter 2	Parameter 3	Parameter 4	Caused by the driver	Caused by address	Description of the file	Name of the product	Company	Processor	Name of the computer	Number of processors	Major version	Minor version
  090310 19983 - 01.dmp	03/09/2010-12:35:40 AM	PAGE_FAULT_IN_NONPAGED_AREA	0 x 00000050	fffffa81'80e63b3b	00000000 00000000'	fffff800'02ce75ff	00000000'00000005	Ntoskrnl.exe	Ntoskrnl.exe + 70740	NT kernel & system	Microsoft® Windows® operating system	Microsoft Corporation	x 64		4	15	7600

  Have you recently added any hardware? Have you updated any drivers just before this started? (Check
  Panel configuration-updates of Windows to see if all drivers have been updated it there all the time it started)
  Main likely culprits are video driver, other great drivers, memory and antivirus/antispyware/security
  products could be at fault as well as reader questions.

  Use the troubleshooter above for pilots and memory.

  BCCode: 50 0 x 00000050

  Cause

  The BCCode 50 usually occurs after the installation of the installation of a faulty material or failure of
  material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Solve the problem

  Solve a defective hardware problem: If the material has been added to the system recently, remove it to see
  If the error recurs. If the hardware failure existing, remove or replace the faulty component. You must run
  Diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the owner
  Manual for your computer.

  Fix a defective system service: Disable the service and confirm that this resolves the error. If so,.
  Contact the manufacturer of the system service on a possible update. If the error occurs during the system
  startup, restart your computer, and then press F8 at the menu character mode that displays the operating system
  choice. In the Windows Advanced Options menu that results, select thelast known good Configuration
  option. This option is most effective when a pilot or a service is added at a time.

  Solve a problem of antivirus software: Disable the program and confirm that this resolves the error. If she
  is the case, contact the manufacturer of the program about a possible update.

  Fix a corrupted NTFS volume: Run Chkdsk /f /r to detect and repair disk errors. You must
  Restart the system before the start of the analysis of disk on a system partition. If the SCSI hard disk, check for
  problems between the SCSI controller and the drive.

  Finally, check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the error. Disable the cache in memory of the BIOS might also resolve it.
  
  BCCode: 50 0 x 00000050<-- read="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Data url (data :) are crashing and laging browser)

  Browsers support a pseudoprotocol ' data:' that analyzes the input as a file encoded in base64. I use this Protocol very often, especially for debugging, as it is not well implemented.

  My questions about this:

  Is there known hacks that would prevent Firefox does not (for even a few minutes), when data long what URL is opened (HTML page means long long, yet less than 1 MB)?

  There the chances that something more practical apply for virtual downloads?

  (Notice that I have write Google chrome.) This is because Firefox is just parsing the URL - and in fact, after the last update, it is immaterial).

  After some research, it seems that the best answer would tell me, that in Firefox, the files can be backed up using Blob. GitHub user eligrey has also set up a framework of the compatibility of this feature : it uses base64 url as a fallback option.
  It is a direct response to my question. But thanks for trying.

  It's still a mystery to me, though, exactly how it is implemented.

  guigs2:
  Not sure, what do you mean by Web console. When Firefox fails, none of its components meet. Firefox is top 1 browser when it comes from does not (could be linked to the amount of plugins, open the tab and entered the property history).

  From stackoverflow: to the stack overflow, specific programming issues are resolved. No question on what Firefox will be implement something.

  COR - el
  IndexedDB is indeed an interesting thing, that I was not aware. But it is more relevant to questions about local storage, rather than javascript downloads.

• My caps lock, shift, NumLock, and icons of volume that is displayed on the screen are gone, and I want them back.

  I don't know what happened to do. How to make a comeback?

  Hello

  Thanks for posting!

  1. have there been recent changes to the system before the show?

  2 what CAPS Lock icon are you referring?

  3. using any tactile function?

  Method 1:

  Follow the link and perform a system restore. Check if it helps.

  System restore

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Answer with the results, I would be happy to help you further.

• HP envy 15 t-j100: screen went white and caps lock flashing after update bios!

  Update my bios to the latest version via app HP support and after it restarted the screen are empty and the caps lock flashing! What can I do about it?

  Thank you for visiting @omidmiri.

  Here on the Forums of HP's Support, you have access to many members of the community with solutions and suggestions to help. I understand that you have a problem with a black screen and the Caps Lock LED flashes after a BIOS update.

  The led near the caps lock shift keys and numlock blinks if a fault is detected during the boot process. The LEDs flash multiple times in a sequence and then stops.

  Please try to manually perform a BIOS recovery, as follows:

  1. Turn off the computer.

  2. Plug the laptop using the power adapter.

  3. When the computer is always off:

     1. Press on and hold the Windows key and the B key at the same time and then press in and hold the power button on the laptop for a second.

     2. Release the power button and the keys.

  By following these steps, the BIOS will reach the EFI partition in order to recover the BIOS to the latest known version of the BIOS from the hard drive.

  Source: Documentation computer won't start not and Emits a LED or beep Code .

  If this does not work, please use the above original document to calculate the number of flashes and troubleshoot accordingly.

  If you think this post has helped you, would help others joining and looking for a solution or you just want to say well done, please click the button accept as Solution or Thumbs Up.

  I would like to know how this happens. If you need assistance, I would be more than happy to continue to help!

  Have a great day!

• Satellite P300 guard crashing and giving me blue screens

  Hello

  I got a Satellite P300, running on Windows Vista home premium and its provided with a card ATI Mobility Radeon HD 3650.
  My laptop crashes and send me windows and blue screens said that it is the cause of ls my graphics driver and the eror message is Atikmdag.
  I've tried everything (I think), I re - installed windows but what I had to do a restore with the current settings, because in some cd a little way my F8 function does not work so I couldn't restore my windows from my hard drive.
  I also had the latest Ati drivers, it does not help either, I also re-installed and tried to run my laptop on windows drivers, it doesn't help either.

  I don't really know what to do, can anyone help me please?

  Are you sure you're running video drivers downloaded from a site of Toshiba? Unfortunately the drivers may not be the root of the problem, so it is important to eliminate as the cause. How to remove AMD recommended driver is [http://support.amd.com/us/kbarticles/Pages/GPU57RemoveOldGraphicsDrivers.aspx] and if you follow that with an installation of drivers Toshiba, then your laptop must be in a State also provided

  I would recommend that you look at this [how to troubleshoot display driver stopped responding and has recovered, errors of type ATIKMDAG.sys | http://support.amd.com/us/kbarticles/Pages/737-27116RadeonSeries-ATIKMDAGhasstoppedrespondingerrormessages.aspx]

• How can I stop my computer with a blue screen coming up and crashing

  Hello

  my computer keeps crahing with a blue screan befor, I ran anti spy wear and its projection up to nothing. When it reboots it says. from what I can tell, it's the same thing all the time.

  help please

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 3081

  More information about the problem:

  BCCode: 50

  BCP1: 9131EB99

  BCP2: 00000001

  BCP3: 886F7C45

  BCP4: 00000000

  OS version: 6_0_6001

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini080812-03.dmp

  C:\Users\ricky g\AppData\Local\Temp\WER-440422-0.sysdata.xml

  C:\Users\ricky g\AppData\Local\Temp\WER204C.tmp.version.txt

  Read our privacy statement:

  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Hello

  Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  To BlueScreen troubleshooting methods using BlueScreenView and MyEventViewer
  See my answers, if this thread - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if you make them available at the SkyDrive or other
  file sharing sites (such as MediaFire). If you have problems downloading the minidumps
  Copy it to the desktop or Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------------------------------------------

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated any drivers just before these
  has started? (Check control panel - updates of Windows to see if all drivers have been updated
  all the time this started) guilty likely hand are video driver, other drivers,.
  memory and antivirus/antispyware/security products could be at fault, but also in car
  questions.

  Use the troubleshooter below and refer to the following message for pilots and memory
  When you get these sections and then back to the resolution of the problems according to the needs.

  BCCode: 50 0 x 00000050

  Cause

  The BCCode 50 usually occurs after the installation of the defective material or in case
  failure of the hardware installed (usually associated with a faulty RAM, either main memory,
  Cache L2 RAM or video RAM memory).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Solve the problem

  Solve a defective hardware problem: If the material has been added to the system recently,
  Remove to see if the error recurs. If existing hardware has failed, remove or replace
  the defective component. You must run the diagnostics of material provided by the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  Fix a defective system service: Disable the service and confirm that this
  resolves the error. If so, contact the manufacturer of the service on a possible system
  Update. If the error occurs during the system startup, restart your computer, and press F8 to
  character mode menu that displays the choice of operating system. As a result
  Windows Advanced Options, select last good known Configuration option menu.
  This option is most effective when a pilot or a service is added at a time.

  Solve a problem of antivirus software: Disable the program and confirm that this fixes
  the error. If this is the case, contact the manufacturer of the program about a possible update.

  Fix a corrupted NTFS volume:  Run Chkdsk /f /r to detect and repair disk
  errors. You must reboot the system before the start of the analysis of disk on a system partition. If
  the hard drive is SCSI, check for problems between the SCSI controller and the disk.

  Finally, check the system log in Event Viewer for additional error messages that might help
  identify the device or driver that generated the error. Disable the cache in memory of the BIOS
  could also resolve it.
  
  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue
  Screen info that would help. Such as ITC and 4 others entered at the bottom left.
  And other information such as codes STOP error and info such as IRQL_NOT_LESS_OR_EQUAL
  or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Start Vista start up blocking guard down, the whole system is slow, internet keeps crashing and error blue screen occurs, System Restore does not

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode:                                              77

  BCP1:                                                   C00000B5

  BCP2:                                                   C00000B5

  BCP3:                                                   00000000

  BCP4:                                                   0AC90000

  OS version: 6_0_6002

  Service Pack: 2_0

  Product:                                              768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini061510-01.dmp

  C:\Users\Sony\AppData\Local\Temp\WER-89201-0.SysData.XML

  C:\Users\Sony\AppData\Local\Temp\WERF93C.tmp.version.txt

  You said the details of the error checking 0x77 - KERNEL_STACK_INPAGE_ERROR.  "This bug check indicates that the data page of the kernel of the required paging file cannot be read in memory."  The reason for the inability to read the data were "STATUS_IO_TIMEOUT' -"{Device Timeout} the specified on HS IO operation did not complete before the expiry time."

  Most likely, this could be due to a problem with the hardware, as a problem with your drive.  These details, combined with your description of the problem, further suggests that this may be the case. Check your event logs (Event Viewer in the in Control Panel Administrative Tools folder) to the messages relevant or notable.   You can also check the cables involving HD are nice and warm.

  As your hard disk may be involved, you want to ensure you had a backup of your data before doing large thing (a backup good and verified, is never a bad idea, anyway).

  Check the behavior in safe mode and the boot, as described below (follow the links):

  To treat blue screens, following general tips:

  Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

  Also consider running SFC/scannow.

  If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

  Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

  Other common suggestions include ensuring drivers are up to date (including video drivers), but also to ensure that you use the latest version of the BIOS.

  It may be useful to use the driver verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings - > then-> the names of the drivers select in a list-> next-> sort by provider-> select all non-Microsoft drivers-> finish and OK your way out of the dialog box.

  Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

  Wait for an error checking to happen after you have enabled the auditor as described and then transfer it to your SkyDriveand provide a link.

• PC crashes and a blue screen on startup after installation of updates

  My pc stops and restarts a blue screen when there is an update to download and install. It is well after I installed the update. Is there an automatic Start Up in the "Local View" app that I can start

  [Original title: updates Crash]

  Hi William,.

  If the PC crashes and displays a blue screen whenever you try to install an update, then it could indicate some other underlying problems in the computer. What was the error message displayed when the computer has started a bluescreen?

  Alternatively, you can refer to this article for more information on blue screen errors:

  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  Get back to us with the exact error message with any error code displayed in the blue screen, so that we can understand what caused this problem and help you accordingly.

• I am developing photos in lightroom.  My photos are below the screen but the screen is lit in blue.  I double click on an image and nothing happens.  I can look in the library, but they don't come to develop.  Anyone know what

  I am developing photos in lightroom.  My photos are below the screen but the screen is lit in blue.  I double click on an image to display and nothing happens.  I can look in library mode, but not in the mode to develop.  Can someone help me?

  Hi pennym,

  Please follow the steps below.

  Open Lightroom

  Go to Lightroom preferences in the Edit menu

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom and try to use it

  Let us know if that helps.

  Kind regards

  ~ Mohit