Script of PowerCLI that lists each IP in vCenter
I found a script that lists all the IPs VMS in vCenter and IPs of the vMkernel ports adapter order this list.
Is it possible that I can put these two together in a script?
# This script lists the IP addresses of all VM
$VMs = get-vmhost | Get - VM
{foreach ($VM to $VMs)
$VMx = get-view $VM.ID
$HW = $VMx.guest.net
foreach ($dev to $HW)
{
foreach ($ip in $dev.ipaddress)
{
$dev | Select @{Name = 'Name'; Expression = {$vm.name}},@{Name = 'IP address'; Expression = {$ip}}, @{Name = 'MAC'; {Expression = {$dev.macaddress}}
}
}
}
And this command below lists all the ports of VMhosts and VMKernel IPs.
Get-VMHost | Get-VMHostNetworkAdapter - VMKernel | Select vmhost, name, portgroupname, ip, subnet mask | FT
I would like to have a script or add this line in the script. Maybe some sort of statement?
The goal is to have this script generates a report containing all the VM IPs and IPs vMKernel Port as well as each IP in vCenter may interview.
Thanks in advance.
Of course, it requires only a change to the last line.
Tags: VMware
Similar Questions
-
Script of PowerCLI to list all VM type disk and OS
Hello
I wonder if you can help me.
I need a script to list all VM hard drive and OS type.
I can do one or the other (using the cli) but not both on the same report.
Thanks, Julien
Hi Julien,
It could be done this way:
Get - vm | Select Name,@{N="Configured OS; E={$_. ExtensionData.Config.GuestFullname}},@{N="Running OS; E={$_. Guest.OsFullName}}, @{N = "disktype"; E = {(Get-disque dur $_).} Storageformat}}
(Configured OS it that you choose when creating the VM, OS running is what we see in fact being run by the VMware Tools)
Tim
-
Is it possible to create a tag that lists the individual labels [keywords] for each position? The current {tag_blogtaglist} creates an endless list of tags.
If you can get hands on with the ID of blog post that you can list the tags assigned to this post particularly blog using module_data. It would be only possible with the new BC. Active following rendering engine. Here are some resources to point you in the right direction: how to activate the BC. Next - http://docs.businesscatalyst.com/developers/liquid/introduction-to-liquid#enable how to use module_data - odule_data http://docs.businesscatalyst.com/developers/liquid/consuming-apis-in-the-front-end-using-m install app BC API discovered to get you started on the syntax - http://docs.businesscatalyst.com/developers/apps/bc-api-discovery module data that lists the tags assigned to a blog post looks like this: {module_data = 'blogposts' version = "v3" field resource = subresource 'tag' = "tags" resourceId = collection "303870" = "myData"} resourceId is the blog ID to render tags for. Hope this helps, Mihai
-
How to display this window that lists all the devices of storage connected to my PC?
How to display this window that lists all the devices of storage connected to my PC? It lists each device, how much space is used and how much is free? I sometimes open it by accident, but I can never find it when I'm looking for it.
original title: storage devicesBeginning
Control Panel
If you the small icons view do the following:
Administration tools
Computer management
Storage
Disk Managment
If you have the category view do the following:
System and security
Administration tools
Computer management
Storage
Disk management
-
y at - it a web page that lists all the supported versions of Firefox?
We wish to state our user doc recommended Firefox versions. So it is the web page that lists all the supported versions of Firefox and can also, we have a list of dates to drop support for versions currently supported?
Yes, it has changed a bit since this thread was started 9 months ago. Support for Firefox 3.6.x continues and versions 4 + lose support at the next new version is available. Support for Firefox 7 ended when Firefox 8 came out yesterday 11 / 08.
Support for 3.6.x will likely end early next year when the proposed new ESR (Extended Support Release) comes to massive institutional facilities / corporate. ESR is proposed for a week 42 version support cycle timetable of a 'standard' of the week quick release 6.
-
How can I access a journal or a report that lists the results of an operation of Disk Defragmenter?
Windows Defrag is supposed to run silently in the background.
Unlike XP, it does not offer a newspaper to the user, as far as I understand.If you schedule a defrag, you can let it run in the background and forget it.
Schedule defragmentationStart button > Search box, type Task Scheduler > pressenter > invite uac, click on continue or enter the admin password >
(click on the pointer before) to expand Task Scheduler Library >
expnad Microsoft >
Expand Windows >
Click on Defrag > the middle column, click scheduled d.... >
right column, click Properties > click triggers tab at the top > click on Edit > select / adjust how to defragment Appendix to be executed, select options >
at the bottom of the box, place a check on " enable " >
OK > OK yet > exit the Task Scheduler window. -
Has anyone created a script opened on that charge action games?
I still get tired, with Illustrator do not remember running a script in the scripts menu, after that Illustrator is closed. Whenever I open it I need to run a script, and then reload recorded actions so that I can use my scripts easier.
If someone created a script that runs at startup of illustrator, runs a menu script, and then recorded actions loads? If not, anyone know if this is possible, as I will probably create.
I had the following approach.
You should always run a script, but now you have to do it once and also rely on some folders inside your folder My Documents.
Re: Action: "Insert a Menu item" Script still not save CS6
You can probably do an auto-hotkey or Applescript to show the file menu if, and I'm pretty lazy / do not use a lot of actions with scripts, where reloading only in this way is tolerable.
-
Is there documentation that lists versions of CITRIX that are compatible for installing creative cloud?
See the link below:
Support boundaries for virtualized environments or server-based
-
Script to get VM list and count on the data store
Hi all
I have a script of lining that gives me the number of virtual machines on the data store, I was looking for both number of virtual machines more VM names too.
Get-Datastore. Select Name, @{N = "NumVM"; E={@($_ | Get - VM). County}} | Sort name | Export-csv-path "C:\Users\userA\Desktop\Cluster_Host_Report\datastorevmcount.csv".
the above script gives not only. or the number of virtual machines on the datastore in VC, can we get that all virtual machines are there on the VC data store.
Thanks in advance a ton.
The ForEach loop do not place anything on the pipeline, you can fix this with the call operator (and)
& {{foreach ($ds in Get-data store)
Get - VM - Datastore $ds |
Select Name,
@{N = "Datastore"; E = {$ds. Name}},
@{N = "VM on the data store"; E = {$ds. ExtensionData.Vm.Count}}
}} | Export Csv report.csv - NoTypeInformation - UseCulture
-
Adobe web page that lists all the CS2 serial numbers?
Lost my serial number CS2 web page URL. Can someone point me to the Adobe web page that lists all the CS2 serial numbers?
You will need to re - install my copy of Acrobat.
Hi INTP1000,
If you have purchased from Adobe, you will be able to locate the serial key using this link find your serial number quickly. Make sure that you use the Adobe ID under which you have registered the product.
Kind regards
Nicos -
How I can't turn off the right toolbar that opens each time I open a new document?
How I can't turn off the right toolbar that opens each time I open a new document?
Hi dirkr,
Please make sure that you have updated to the latest version of the CD player, and then uncheck the box open tools for each Document in the Document preferences. That should do the trick!
Best,
Sara
-
Menu fonts lists each weight for each font
I have a problem frustrating where Photoshop CC (2014) lists each weight for each font in the menu fonts MAIN. So when I open the menu, it looks like this:
Arial Italic
Arial Regular
Arial Bold
Light of the future
Future of light Oblique
Book of the future
The future Roman
Future Book Oblique
etc.
When it has usually just:
Arial
Future
etc.
(with weights chosen only in the secondary menu).
I tried almost all the stuff on the page resolution of police problems , nothing done (remove the fonts, I added, clearing cache fonts Adobe, cache system font, etc.). Screen fonts to work properly in Illustrator CC (2014) as well as in other applications, so this is a problem specific to Photoshop.
Someone at - he seen this before or have any suggestions?
Thank you!
-e.
This has been discussed before - Re: fonts by family gone?. Very unpopular, and there is no Adobe explained why they thought it was a good thing.
-
The small images that accompany each layer have all disappeared.
Photoshop CC.
The small images that accompany each layer have all disappeared. Now, I don't see what's on each layer. I can't work withoutthese thumbnails for each layer.
How can I fix?
Brian
Hi Jenny
Thanks for your quick response.
Your instructions solved the problem.
Thanks again
-
Is an operating system that is supported for installing vCenter W2008
W2008 is an operating system supported for installing vCenter I looked through the documentation and I see is that W2003 is supported as an OS for vCenter. I have a client who says that VMware has told them that W2008 is supported with vCenter in the form of OS install. Does anyone under W2008 vCenter?
Thank you
Savoy6
No. 2008 is not supported for vCenter
If you find this or any other answer useful please consider awarding points marking the answer correct or useful
-
Trying to create a script that lists all clusters in a data center
Hello
I am trying to create a script that exports a vCenter configuration essentially and imports it in a new vCenter. I want the script to run without specifying a center of data manually. All the scripts I've seen you need to manually enter the data center.
So, how to do a list of all the data centers with clusters in each of them? I also want to create a variable that contains the groups for the respective data centers. Here's a basic idea of what I want to do:
$Datacenters = get-data center
foreach ($Datacenter to $Datacenters)
{
$cluster = get-Cluster-location $Datacenter
Write-Host "list of clusters in $Datacenters.
Write-Host "$Cluster".
}
Who will give me the output like this:
List cluster Datacenter1
cluster2 CLUSTER1
List cluster Datacenter2
cluster3 cluster4
But I don't know how I can get so I have variable like this:
$datacenter1 = cluster1, cluster2
$datacenter2 = cluster3, cluster4
Did you mean something like this?
Get-data center | %{
New-Variable - Name $_. Name - value ([string]: join ("," (Get-Cluster-location $_ | % {$_.}))) Name})))
}
Maybe you are looking for
-
emails bounced by hotmail as not rfc 5322 complient
I have been using Thunderbird for a while with no problems. I have recently updated to version 38.1.0, after which the mails from Hotmail (or live.com , or msn.com , which seem to be the same server) are dismissed with: SMTP error from the remote ser
-
Browsing history in Firefox 17 - can I keep this for a specific number of days?
Previous versions of Firefox would be specify us how long to keep the navigation history and then automatically delete anything older than that. I can't find this option in Firefox 17. I had serious problems with FF, with frequent and long, breaks th
-
Satellite Pro A120 (PSAC1E) hangs after booting in a then a noisy fan
My laptop A120 freezes during - or after startup, sometimes immediately, sometimes later (after 5 or 10 minutes).After the laptop has to freeze the fan going very strong and I can only shut down by pressing the power button for a while.I already flas
-
My new HP Officejet Pro 8600 will not scan more than 300 DPI when scanning individual photos on the glass plate. I do not use the document feeder. I use this printer wireless on an iMac and a PC.
-
13 stream: Stream HP 13 (13-c010nr) won't start - flashing caps LED twice
Laptop boot more. Was working fine before that we have a significant voltage drop/blackout. Shift caps lock flashes two times, and then repeats. Black screen. Not useful support Web site. Guard sends me the General information on blink codes, whic