Script of PowerCLI to list all VM type disk and OS

Similar Questions

• Script of PowerCLI that lists each IP in vCenter

  I found a script that lists all the IPs VMS in vCenter and IPs of the vMkernel ports adapter order this list.

  Is it possible that I can put these two together in a script?

  # This script lists the IP addresses of all VM

  $VMs = get-vmhost | Get - VM
  {foreach ($VM to $VMs)
  $VMx = get-view $VM.ID
  $HW = $VMx.guest.net
  foreach ($dev to $HW)
  {
  foreach ($ip in $dev.ipaddress)
  {
  $dev | Select @{Name = 'Name'; Expression = {$vm.name}},@{Name = 'IP address'; Expression = {$ip}}, @{Name = 'MAC'; {Expression = {$dev.macaddress}}
  }
  }
  }

  And this command below lists all the ports of VMhosts and VMKernel IPs.

  Get-VMHost | Get-VMHostNetworkAdapter - VMKernel | Select vmhost, name, portgroupname, ip, subnet mask | FT

  I would like to have a script or add this line in the script.  Maybe some sort of statement?

  The goal is to have this script generates a report containing all the VM IPs and IPs vMKernel Port as well as each IP in vCenter may interview.

  Thanks in advance.

  Of course, it requires only a change to the last line.

• I had to reinstall windows on my Dell XPS recently. I used all the original disks and now I get an error when I try to activate it. I entered the product key and it says that it is incorrect.

  original title: Windows Visa re - install

  I had to reinstall windows on my Dell XPS recently. I used all the original disks and now I get an error when I try to activate it. I entered codes product etc. According to the disks but still no joy. How to solve this?

  Kind regards

  John Welsh

  I had to reinstall windows on my Dell XPS recently. I used all the original disks and now I get an error when I try to activate it. I entered codes product etc. According to the disks but still no joy. How to solve this?

  Kind regards

  John Welsh

  Activate by phone

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
  Please note this step #9

  If the activation service informs you that she has failed and cannot help with activation, then STAY ON THE LINE and your call will be transferred to an operator of activation which will help you to activate your copy of Vista. The operator will give you all the numbers to ID of Confirmation if they accept that your copy of Vista is legitimate.
  NOTE: The operator just explain your situation and what you did to require activation. (EX: hardware upgrade, installed Vista on a new computer after uninstalling it from the old one, etc...)

• Script to create the folder on the physical disk and not in the package

  Hello-

  Attached is a script that I have which will create a folder on the C:\ inside the bubble.  What I need, it's so he can create a folder on the physical disk and not inside the bubble.  Can someone tell me what I did wrong here?  I have a similar script which creates a folder on the D drive for the linked clones and it works fine.  Thanks in advance!

  Change the isolation mode of the file %drive_C%\vaforms5 'Merged' into the Attributes.ini, rebuild the ThinApp and check.

  With the help of isolation have merged, the application can read/write file on the physical machine.

• Script of PowerCLI to measure the number of host and its virtual machine in each cluster

  Hello

  I'm trying to create a script on regular which gives an output of the host and virtual machine into a cluster of vcenter as below counties.

  Cluster:                                                      VMHost                         VM's

  Cluster01                                                     04                                  15

  cluster02                                                      02                                  35

  Simply using a sample onliner

  Get-VMHost | Select @{N = "Cl"; {E = {Get-Cluster - VMHost $_}} name, @{N = "NumVM"; E={($_ | Get - VM). County}} | Cluster of kind, name

  any ideas? Thanks in advance

  Kind regards

  Subash.

  Try this:

  Get-Cluster | Select Name, @{N="Host Count"; E={($_ | Get-VMHost).Count}},  @{N="VM Count"; E={($_ | Get-VM).Count}}
  

• The ' organize bookmarks page has changed and the column that lists all bookmarks has shrunk and only the folder icons are visible - their names have disappeared and is not visible. " How to restore the names?

  Records on the page "organize bookmarks" show only icons - names of bookmarks disappeared. Impossible to tell what bookkmarks they are. How to restore the names that were once next icons?

  You can place the mouse pointer on the border between the left and right panes and drag the border with the left mouse button to the right to this wider left pane.

  If this does not work or stay after you restart Firefox, then see:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• In the Powershell script execution error: could not find the type [ordered]: make sure that the assembly containing this type is loaded.

  People,

  I am trying to load and run the PowerShell script of PowerCLI Module to check the CPU, memory and storage overcommitment. VMware PowerCLI Blog - VMware Blogs but somehow it is always stopped with the error: cannot find the [ordered] type: make sure that the assembly containing this type is loaded.

  Here are some of the diagnostic result:

  $PSVersionTable

  Value name

  ----                           -----

  PSVersion 2.0

  PSCompatibleVersions {1.0, 2.0}

  BuildVersion 6.1.7601.17514

  PSRemotingProtocolVersion 2.1

  WSManStackVersion 2.0

  CLRVersion 4.0.30319.1026

  SerializationVersion 1.1.0.1

  Get-ChildItem ' HKLM:\SOFTWARE\Microsoft\NET frame Setup\NDP'-recurse |

  Get-ItemProperty-name of the EA - 0 Version |

  Where {$_.} PSChildName-match ' ^ (?) (S) \p {L} "} |"

  Select PSChildName, Version

  PSChildName Version

  -----------                       -------

  v2.0.50727 2.0.50727.5420

  3.0.30729.5420 v3.0

  Windows Communication Foundation 3.0.4506.5420

  Windows Presentation Foundation 3.0.6920.5011

  3.5.30729.5420 v3.5

  Customer 4.0.30319

  4.0.30319 full

  Get-PowerCLIVersion

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.8 Release 1 build 2057893

  ---------------

  Versions of the snap

  ---------------

  Build VMWare AutoDeploy PowerCLI component 5.5 1983942

  Build VMWare ImageBuilder PowerCLI component 5.5 1983942

  Build license of VMware PowerCLI component 5.5 1265954

  Build VMware Storage PowerCLI component 5.8 2057894

  Build VDS's VMware PowerCLI component 5.8 2031581

  Build VMware vSphere PowerCLI component 5.8 2031581

  I installed Windows6. 1 -KB2819745- x 64 - MultiPkg.msu to enable Powershell v4.0 on my Windows 7 laptop, but still the script cannot be executed with the above error message.

  Any kind of aid and assistance would be greatly appreciated.

  Thank you

  Hello-

  Ah, yes--it is that review.

  Another option, because you are not able to go to .NET FX 4.5, is to remove the parts "[ordered]' of the code that you use.  This type Accelerator makes the hash table a dictionary sorted.  The effect to remove that from the code will be that the properties of the object that results will not be in the order in which they appear in the code.

  And, another option would be to install PowerShell v3 (the version in which the '[ordered]' feature has been added').  That shouldn't require a FX .NET newer than what you showed as having already installed on this computer.  However, as we have seen with the PSSnapin and PSv4 Exchange, you want to make sure that the PSSnapins / Modules you want to use are compatible with PowerShell v3.

• Command to list all the hard files that are attached to a virtual machine

  Hi people,

  I am documenting our infrastructure. I would like to a command that lists all the vmdk files and the virtual machine, they are attached. I'm sure that I've done it before, but I don't remember the command. Thank you

  in advance.

  Paul

  You could use Powershell and make a request to Virtual Center, if they are available:

  A basic example:

  SE connect-VIserver

  Get - vm | Select Name, @{Name = "VMDK disks"; {Expression = {$_ | get-harddisk | select filename}}

  / Rubeck

• I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  Hi gurrus and LucD

  I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  The script should search for information in a multiple Vcenter servers and multiple clusters and list all the VMs name, status (two powers on or off) with type card NETWORK Type E1000 only no other.

  Concerning

  Nauman

  Try like this

  $report = @)

  {foreach ($cluster Get-cluster)

  foreach ($rp in Get-ResourcePool-location $cluster) {}

  foreach ($vm in (Get-VM-location the $rp |)) Where {Get-NetworkAdapter - VM $_______ | where {$_.}} Type - eq "e1000"}})) {}

  $report += $vm. Select @{N = "VM"; E={$_. Name}},

  @{N = 'vCenter'; E={$_. Uid.Split('@') [1]. "Split(':') [0]}},"

  @{N = "Cluster"; E = {$cluster. Name}},

  @{N = "ResourcePool"; E = {$rp. Name}}

  }

  }

  }

  $report | Export Csv C:\temp\report.csv - NoTypeInformation - UseCulture

• PowerCLI script to list all the streams

  Hello

  Want to know if there is a way to list all inbound and outbound connections with IP and port of a vcenter infrastructure.

  Try it with scale and dvs but looks delicate, as navigator of Vmware infrastructure can perhaps do.

  But for sure, I think we can do it with powercli just want to confirm if there already exists.

  Thank you!

  Hello

  Check if that shell commands can help you

  https://KB.VMware.com/kb/2051814

  https://KB.VMware.com/kb/2020669

  Or with (command shell and PowerCli)

  http://technodrone.blogspot.com/2011/09/netstat-for-ESXi.html

  I hope this can help

• Need a PowerShell Script to list all my stores of data, capacity and VMFS format.

  All,

  I need a script to list all my stores of data, capacity and VMFS format.

  That's what I have so far but its does not give me the results I need.

  Get-Datastore - Datacenter MN_PROD | where {$_.} Type - eq "VMFS"} | Select-Object Name,@{N="VMFS version. {E = {$_.Info.Vmfs.Version}}

  Try like this

  Get-Datastore -Datacenter MN_PROD | where {$_.Type -eq "VMFS"} | Select-Object Name,CapacityGB,    @{N="VMFS version";E={$_.FileSystemVersion}}
  

• Create a script to list all the .bat and .cmd files with the dir command &

  Hello

  Im trying to create a script that will list all the .bat and .cmd files in a specific folder and add the data to a new file (file.txt) - example below:

  dir c:\>desktop\file.txt/OD
  dir d:\>>desktop\file.txt
  dir f:\jobs\*.bat>>desktop\file.txt/OD

  IM able to search the F drive and the list of all the .bat files using a generic parameter, but ideally id like to search for .bat and .cmd files, but whenever I have it try does not work. Any ideas?

  I tried the following:

  dir c:\>desktop\file.txt/OD
  dir d:\>>desktop\file.txt
  dir f:\jobs\*.bat,*.cmd>>desktop\file.txt/OD

  Any help is appreciated, the reason for which I need to check all the .bat and .cmd files is to ensure that the scripts on a cluster are all data, so need them all listed in a doc if possible

  Thank you

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for guys official script Forum. Please ask your question in the official Scripting Guys Forum.

  http://social.technet.Microsoft.com/forums/en-us/iTCG/threads

• Can I write a .bat file to list all files of a specific type?

  With the help that I am here, I wrote a simple .bat file that lists all the files in a directory that I chose.

  I would now like to make a version of which lists all the files in the specified directory that have a .wav extension. Is this possible?

  Here are the existing syntax:

  D:
  CD D:\inetpub\kthings
  dir > C:\tftDocuments.txt
  TYPE tftDocuments.txt

  Can I write a .bat file to list all files of a specific type?

  I do not know.  Can you?

  Tips:

  Go here: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ntcmds.mspx?mfr=true

  Or just open a command prompt window (start > run > cmd > OK), and then type a command followed by the characters /? to see information about this command.

  For example, try

  dir /?

  You should also read http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/batch.mspx?mfr=true this http://technet.microsoft.com/en-us/library/bb490982.aspx and maybe this http://www.pcstats.com/articleview.cfm?articleID=1767

• Script to list all bookmarks in top/Parent not bookmarks Sub

  Hello

  Can someone advise please how to modify the following script, which lists the tree entire bookmark list on the contrary all bookmarks in high level and not bookmarks under?

  This is the script that I used that lists all bookmarks.

  / * All bookmarks in the list * /.
  / * Work recursive l‟arbre bookmark * /.
  function PrintBookmarks (bm, nLevel)
  {
  If (nLevel! = 0) {/ / do not print the root}
  bmReport.absIndent = bmTab *(nLevel-1);
  BM. Execute();
  bmReport.writeText ("(page #) ' + (bm.doc.pageNum + 1) +" "+ bm.name");

  }
  If (bm.children! = null)
  for (var i = 0; i < bm.children.length; i ++)
  PrintBookmarks (bm.children [i], nLevel + 1);
  }
  bmTab = 20;
  bmReport = new Report();
  bmReport.size = 2;
  bmReport.writeText (this.title);
  bmReport.writeText("");
  bmReport.size = 1.5;
  bmReport.writeText ("list bookmarks");
  bmReport.writeText("");
  bmReport.size = 1;
  PrintBookmarks (this.bookmarkRoot, 0);
  global.bmRep = bmReport;  do global
  global.wrtDoc = app.setInterval)
  "Try {'} '.
  +' reportDoc = global.bmRep.open ("list bookmarks"); "
  "+' console.println ("open Executed");"
  + "app.clearInterval (global.wrtDoc);"
  +' delete global.wrtDoc;'
  "+' console.println ("App.clearInterval Executed");"
  + "reportDoc.info.title = 'Bookmarks lists';"
  + "reportDoc.info.Author ="Bookmark Sequence list";"
  {+'} catch (e) {console.println ("Meanwhile...:" + e) ";}"}
  (100);

  Any help will be most appreciated.

  Use the PrintBookmarks function:

  If (bm.children! = null & nLevel == 0)

• Need a script to list all virtual machines on specific data warehouses

  I am trying to find a way to list all virtual computers on specific data warehouses. I use vSphere 5.1 and so far I got this:

  Get-Datastore. where {$_ .name - like ' * XXX * ""} | Get - VM | Select name, @{N = "Datastore"; {E = {Get-Datastore - VM $_}} | Sort name | FT - one

  This kind of work, but it would be perfect if I got this:

  -Group data store

  -Unique virtual machines (VMS to report only to the data store where the VMX)

  Any help appreciated.

  I relied on the fact that the first in the list would be the data store that holds the VMX, which apparently is a misconception.

  Try like this

  Get-Datastore-Name ' * xxx *' |

  Get - VM | Select the name,

  @{N = "Datastore"; E={$_. {{ExtensionData.Config.Files.VmPathName.split ('[]') [1]}} |

  Tri-objet-property data store name |

  Format-Table - AutoSize