Script simple stop will not work - sometimes...

Similar Questions

• simple slideshow will not work as long as 3.0

  L.S. I have this little slide show, it is convenient for my students. It has always worked well in 2.0,

  5 slides and two buttons: back and next.

  The in2.0 script has: prevFrame and nextFrame in code

  and for exceptions to frame 1 and frame 5 made us a new image 1 in the layer actions and coded the rear button, gotoAndStop (5); and a new framework 5 and coded the following button: gotoAndStop (1);

  Works.

  Now, I put the thing earlier than 3.0: and I can't do work properly... the work of buttons, but when I'm on frame 5 and back to 4, it will go no further than 4, evenso when I return to frame 1 of 5, I can't go more than frame 1.

  Do I did wrong?

  the fla in cs5 is attached.

  Thank you

  Anne Vossen

  Post edited by: Vossen, I'm sorry but I can't find the button to load my files... so here's the script:

  under section 1:

  import flash.events.MouseEvent;

  Stop();

  next_btn.addEventListener (MouseEvent.CLICK, volgendFrame);
  next_btn.addEventListener (MouseEvent.CLICK, eersteFrame);
  back_btn.addEventListener (MouseEvent.CLICK, vorigFrame);
  back_btn.addEventListener (MouseEvent.CLICK, laatsteFrame);

  function volgendFrame(evt:MouseEvent):void {}
  nextFrame();
  }
  function eersteFrame(evt:MouseEvent):void {}
  gotoAndStop (1);
  }
  function vorigFrame(event:MouseEvent):void {}
  prevFrame();
  }
  function laatsteFrame(event:MouseEvent):void {}
  gotoAndStop (5);
  }

  section 2:

  next_btn.addEventListener (MouseEvent.CLICK, volgendFrame);
  next_btn.addEventListener (MouseEvent.CLICK, eersteFrame);
  back_btn.addEventListener (MouseEvent.CLICK, vorigFrame);
  back_btn.addEventListener (MouseEvent.CLICK, laatsteFrame);

  section 5:

  Stop();

  next_btn.addEventListener (MouseEvent.CLICK, volgendFrame);
  next_btn.addEventListener (MouseEvent.CLICK, eersteFrame);
  back_btn.addEventListener (MouseEvent.CLICK, vorigFrame);
  back_btn.addEventListener (MouseEvent.CLICK, laatsteFrame);

  Essentially, you are trying to build a version complicated of conditionals to deal with the end points of the scenario with the approach that you have taken which is probably easier to explain by introducing conditional elements.

  When you start playing with the different instances of the same name on the same layers there are anomalies that occur that there are simply no move.  For example, it is possible that the Framework 1 button keeps the event listener who has been assigned to the button in frame 5 even if you assign a new when she went back to frame 1, etc... anomalies that defy the intentions and the actual code.  Asigning different names for objects in adjacent images can also lead to erroneous results.  If you want to use new instances of the same object with different names, use different layers for each or separate instances with keyframes empty, otherwise, it may acquire the name of the former, regardless of your naming.

  A 1009 error indicates that an object your code tries to target does not exist as far as your code sees it (and the error will be valid).  This may be due to lack somewhere a name or instance trying the target items that aren't in the current framework or other reasons.  If you go in your publishing settings and select the option to enable debugging, the line number of the offending code will be indicted in the error message right after the chassis number.

• My loop is simple but will not work!

  Hello. I'm having a lot of trouble.
  
  I have a simple loop which goes through and sets a disabled button if its value is the database. The code is below:
  
  DECLARE
  benchmark(loop_count,expression) NUMBER (2): = 1;
  seat_count NUMBER (2);
  item_id;
  Item1 VARCHAR2 (5): = 'SEAT_;
  nom_element VARCHAR2 (10);
  
  BEGIN
  LOOP
  SELECT COUNT (*) IN seat_count
  SEAT WHERE showid =: global .showid
  AND seatnumber = benchmark(loop_count,expression);
  IF seat_count = 1 THEN
  nom_element: = item1 | benchmark(loop_count,expression);
  item_id: = FIND_ITEM (item_name);
  set_item_property (item_id, Enabled, PROPERTY_FALSE);
  END IF;
  
  IF benchmark(loop_count,expression) = 99 THEN
  EXIT;
  END IF;
  benchmark(loop_count,expression): = benchmark(loop_count,expression) + 1;
  END LOOP;
  END;
  
  
  When I run the form, I get 3 guests in a line saying "FRM-41045: can not find the point: invalid ID '.
  If I change the value of
  tem_id: = FIND_ITEM (item_name); TO
  item_id: = FIND_ITEM ('SEAT_10');
  for example, he will work on "SEAT_10" and will disable her, but cannot do through the variable and the loop.
  
  Everyone see anytihng wrong with what I wrote?
  
  Tahnks a lot
  
  Published by: lockmac on May 12, 2009 21:37
  
  Published by: lockmac on May 12, 2009 21:38

  Few things:

  What is the result of the sql query by operating in sql developer?

  From your code, it seems that you must have the items SEAT_1, SEAT_2... SEAT_99 in your form.

  Do you have the number of elements in your form?

  If the values are not there it will give you "article not found".

  You must also maintain in your code, if the element is present or not using something like below after your find_item:

  item_id := FIND_ITEM(item_name);
  IF Id_Null(item_id) THEN
     Message('No such item: '||item_name);
     RAISE Form_Trigger_Failure;
  ELSE
     set_item_property(item_id,ENABLED,PROPERTY_FALSE);
  END IF;
  

  It will be useful.

  Check the answer as useful / OK, if this can help you

  Carole

• Immediate stop will not work, must give up to go in standby mode SunCluster

  Client has a Solaris Clusterware, the customer sees the semtimedop() system call return EAGAIN when executing "stop" on their database on a cluster node. This is expected when the shared resource, the semaphore is the protection is not available. The shared resource is only used by the Oracle process, so we need to know what is the resource and what other processes with it. MOS doc 760968.1 is not useful. A crashdump Solaris when the database shutdown problem took place showed no sign of an OS issue so the help of the database is required.
  
  We have tried to capture the following trace, but track is empty, and we're stuck since then.
  
  SQL > alter session set events 10046 name context forever, trace level 12';
  "SQL > alter session set events 10400 name context path always, level 1;
  SQL > shutdown immediate;

  +... moved post of forum Sun servers which is a HARDWARE forum for HARDWARE questions, +.
  the Forum Oracle Clusterware, for better alignment of the section.

• Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Please help.

  Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not.  Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.

  You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.

• Components simple will not work.

  Oh my word. Years, I did a project in the spaghetti of ColdFusion tags and am now on it and want to improve it. Learning components, so I can hide the code especially recycled correctly. I'm after a walk to follow simple components components | Learn of the CF in a week. And this 'thing' will not work.

  I get the error message:

  

  But... the syntax seems to me, and it's a direct and paste in the tutorial, anyway.

  Here's Greeting.cfc:

  < cfproperty >

  < cfscript >

  component {}

  variables.baseGreeting = "Hello";

  public string function getFullName (String firstName, String lastName) {}

  var arguments.firstName = fullName & "" & arguments.lastName;

  Returns the full name;

  }

  public string function getGreeting (String firstName, String lastName) {}

  var fullName = getFullName (argumentCollection = arguments);

  var message = variables.baseGreeting & fullName;

  return of the vows;

  }

  }

  < / cfscript >

  < / cfproperty >

  And here is the page simple call:

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  < title > Untitled Document < /title >

  < / head >

  < body >

  < cfset greeting = CreateObject ("Component", "\CustomTags\Greeting.cfc") / >

  < cfset MyHelloWorld = Greeting.getGreeting (firstName = "Emily", lastName = "Corbeil") / >

  < cfoutput >

  #myGreeting #.

  < / cfoutput >

  < / body >

  < / html >

  What the everlovin ' happens here!

  Thanks in advance for the index. Obviously, I have a long way ahead of me.

  amy_yl wrote:

  Here's Greeting.cfc:

  component {}

  You try to define a component within a component. Which is not allowed. Use only one.

• Portege M750 Win7 64 bit Wireless Manager (3G) will not work

  I can't TOSHIBA Wireless Manager (3G) to work in a new installation of Win 7 64 bit.

  I did a test installation of Windows 7 64 - bit on and old SATA hard drive and checked TOSHIBA Wireless Manager would work. He did.

  I then did a fresh install of Windows 7 64 - bit on a new Crucial C300 Real SSD 256Go.

  The new facility with the Crucial SSD is not very successful... The operation "stop and restart" does not - the closing not always power off completely and you must push the switch down to.

  Sometimes the SSD does not start - you enter the password of the BIOS but then nothing happens. Sometimes you turn off the power and remove the battery before as the startup disk.

  But the biggest problem is that the (3G) Wireless Manager will not work. The application opens and indicates that "died" - which it is impossible that I use WiFi to post this question.

  I tried to install the software Vodafone 3 G portal. It detects the presence of the 'mobile device' (SIM in housing) but then can not turn it on.

  I downloaded and installed all the latest drivers for the chip, the pilot 3G, 3G software, LAN driver, LAN software and all updates of Windows 7.

  I have the latest version of the BIOS (3.0) but this has not been updated by Toshiba since 11/04/09.

  I would point out that Diagnostic PC Toshiba tool does not recognize the installed 8 GB memory (but ccleaner):

  Model name PORTEGE M750
  Part number PPM75E-00N017EN
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS Version 3.00
  Processor Intel (r) Core (TM) 2 Duo CPU P8400 2.26 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 256,052,899,840 [bytes] 238.468 [GB]
  Network Intel(r) 82567LM Gigabit Network Connection = 10.0.2.2 version = MAC address
  TOSHIBA F3507g Mobile Broadband Network Adapter version 1.3.0.9 = MAC = address
  Version of Intel(r) WiFi Link 5100 AGN = 13.4.0.9 = MAC address
  F3507g Mobile Broadband Modem Modem TOSHIBA version = 5.24.3.0
  Internet Explorer 8.0.7600.16385

  This indicates a BIOS problem?

  -don't

  points to a problem of firmware on the SSD drive (is it sandforce) torque to the incompatibility of BIOS of the SSD.

  I assume that all drivers installed etc were identical on the installation of the trial of HARD drive? so if this is the case it must be the SSD does not not with the BIOS correctly, so the other issues as well

• black screen and nice white cursor and Ctrl alt del will not work, I can not update shell

  black screen and nice white cursor and Ctrl alt del will not work, I can change the shell to the Explorer, but I can't unload or load the hive, what should I do?

  Hello

  Your question I know that some of these methods is not available now, however, all
  Convenience store is included just in case where win you some access as you try to solve the problem.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Some software will not work on Windows Vista

  Some software will not work on Windows Vista so I need to install Windows XP
  But how to download drivers for devices such as bluetooth, Lan, his...

  Hello

  I put t know what phone you use, but many Toshiba notebook series are delivered and support similar hardware parts.
  You can simply try to test and install the drivers from different series.

  The new Toshiba Bluetooth stack supports Vista and you can install it on all the laptops Toshiba which supports the feature of BT.
  Sometimes, you will get the chip card driver LAN or compatible Sound on the site of manufacture of chips like Intel, realtek, etc.

• HP Support Assistant will not work.

  Desktop HP Pavilion HPE h8-1020

  Win 7 64 bit,

  HP Support Assistant will not work. I get the following:

  HPSF.exe has stopped working, the application has encountered a problem and needs to close

  I downloaded and installed the latest updates, but it has not fixed the problem.

  Can someone please help?

  Thank you

  Hello

  Try the following

  Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  When this has completed, restart the computer.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the computer again.

  Kind regards

  DP - K

• Message "this application will not work in this operating system" at the start.

  Original title: this application will not work in this operating system

  After starting, I get this error message:

  Stop: this application will not work in this operating system

  What application is this? How can I fix? I am running XP SP3

  CZFMDXPK c:\program files\fdd + fever disease combo reader\czfmdxpk.exe a the culpit. The problem is resolved and no Malware found. eventvwr helped me identify other problems, and now I'm curious on how to disable the stubborn programs in msconfig. I'll get.

  You did a great job and thank you very much. Have a beautiful weekend. Rainer

• None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine, but of course, this should work if you think you need.
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues

• Windows Search service will not work.

  Windows Search service will not work. In the event log, it says "Windows Search service terminated with service specific error %-2147218174.

  Hi Russ,

  1. When was the last time it was working fine?
  2. Did you the latest changes on the computer?
  3. You are able to start the service manually?

  I suggest that you try manually start the service Windows search and check if it works.

  (a) click Start type services.msc in the search box, and then click OK.

  (b) in the Services (Local) list, right-click Windows Search, and then click Properties.

  (c) if the drop-down list Startup type is set to the value off, select Automaticfrom the drop-down list Startup type and then click OK.

  (d) click thefile menu and then click exit.

  If fails it above step then check out the link below and run the fixit from microsoft tool available.

  Windows search does not work and the search is slow or stops

  http://support.Microsoft.com/mats/windows_search/en-us?EntryPoint=lightbox

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• Task Manager Windows 'show all processes from all users' will not work

  Hi im running service of 64 bit vista Home premium pack 2

  For some reason any button "show all processes from all users" in the Task Manager will not work, when I click nothing happens, uac prompt little or nothing.

  I can end processes very do well no problem it's just the show all button that does not work, I thought that maybe the taskmgr.exe in my right-click system32 folder and compatiability tab and running it as admin it would work, but the compatiability tab is completely grayed out all I can't click anything in it.

  Im not a big computer wiz, but I checked my user accounts account im logged on says that it is the administrator and UAC is on.

  On a side note do not know if this has nothing to do with my problem but recently my computer has got contracted a Trojan horse that has infected the mrt.exe file, I had to delete, now I get an error during windows startup associated with mrt.exe works not properly. any suggestions how to solve this problem too

  Hello

  Make sure that the malware is removed completely

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _____________________________________________________________________

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html