ScriptUI Graphics - question of the Listbox

Similar Questions

• Update graphics card on the Satellite X 200

  Hello members,

  I m a proud owner of the Satellite X 200 with a map single chart (NV8700GT-256). But like most of these screen-no video... Black NV cards. I know, this card can be changed-it s not soldered, but it seems to be a specialized map only made by Toshiba.

  Many sellers (most of them in CN) have these cards and I have googled a lot: NV8700GT with 256 MB or 512 MB. This should be fine without any problem LS - 3443P. But there are other cards sill: LS - 3442P with a chip ATI and 256 or 512 MB of ram. They are used in a note of P200. Some dealers say they are useabe in a 200 X too. The connector seems to be the same as the dimensions of the Board of directors a the place chips. Some say that ATI would be better, cooler and there is no "burn-out". I have no answer until what chip is used-i think it's a series of radeo 2600. Assessment tests provide the same speed as the NV8700GT. But none of them give a real answer - so my question is: has anyone of you experience with this card? Can I choose ATI or upgrade to an NV with 512 MB of ram. Will be my laptop boot up or should I change the bios first? These graphics problems are boring!
  Thank you, Tom

  I have senn there are many questions about the maximum amount of ram... I have a DV9000 HP with the same chipset intel PM965M for office. HP says the maximum is 4G (2x2G) as toshi too. (For HP), but this true isn´t! My HP has two modules of 4G with the 2Rx8 specification; 8 tokens, 6400S / 800M, order 8 x 512. With windows vista64 oder w7-64 with no problems. I m going to test it with my toshi after solving the video problem...

  Have you already checked similar thread - http://forums.computers.toshiba-europe.com/forums//thread.jspa?messageID=205529?

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Satellite P200D - 12f PSPBQE - Question about the temperature of the CPU/GFX

  Hey guys,.

  Here are the specs of the laptop:
  TOSHIBA Satellite P200D-12F series laptop - AMD processor Turion 64 X 2 TL - 62 2.1 GHz 2 MB of Cache, memory 2048 MB DDR2-667 SO-Dimm (2 x 1024), drive optical drive DVD Super Multi, 250 GB SATA, 5400 obr/min, 17.1 "WXGA + TrueBright High Brightness (1440 x 900 resolution) TFT LCD Display, 10/100 Mbit Ethernet LAN, 802. 11b / g wireless LAN, 56 K Modem, ATI Radeon HD2600 256 MB dedicated graphics card, stereo speakers integrated Harman Kardon, 3,45 kg, Bluetooth, integrated webcam, Microsoft Windows Vista Home Premium Edition, 2 years international warranty

  I can t find any son or sites that define idle temp for this processor and graphics card.
  in normal position and high performance / games.
  I have an extra cooler (link: http://www.mimovrste.com/artikel/2210016012/hladilnik-za-prenosnik-akasa-ak-nbc-02b) under the laptop. It helps us not much, but still it s running * 53 C * (celsius) while surfing internet.

  Without this cooler surroundings 60 C. It seems strange to me.
  When I play games on high performance base temperature goes to * 63 C *, without paste xtra * + 80 c! *

  I clean the heat sinks each month 1 with a huge compressor :)
  I don t let any dust in there. I have the laptop like a year now big runs, but still I m interested in this s the temperature of our similar models.
  I had a few 'disable problems' when I didn t have the additional cooler, but now he runs great, but im still not convinced it s the 'normal' temp : S

  So please help a lost soul, surf the internet finding nothing to answer his question :)

  TNX

  Hi dariod

  You can't find any info on the idle temp for this processor and graphics card because the temperature level is always different.
  The laptop temperature depends on the temperature of the environment, the use of the laptop and power settings.

  In Win Vista, you can change some settings to be able to affect the temperature of the CPU and the cooling module feature:

  Here is a useful link to the FAQ:
  + How to manage Windows Vista power management features.
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  In addition, you must update the BIOS if a new BIOS update is available.

  Greetings

• How to display the number of socket in the ListBox UI control?

  I want to display the number of socket in the Listbox control on execution. I use DisplayExpression method, set the entry as '% TestSocketIndex', but it does not work. This methond works fine if I connect the Combobox of UI control to ExecutionViewMgr.ConnectExecutionList.

  Is there a solution

  

  

  Hey wellsc,

  I have looked at this issue and ran into the same issue you described. I dropped the CAR 482840 for a developer study the matter further. Unfortunately, workarounds only I can think immediately would be to use a ComboBox control or to implement the functionality desired by using a native LabVIEW ListBox.

  Let us know if there is something we can do to help, or if you have other questions about how to implement one of the workarounds. You can still use this CAR number to check the status of the issue, as well.

• Windows Vista does not recognize the graphics card and the broadband

  Original title: recognize the graphics card and the broadband connection

  Windows vista can't recognize the graphics card and the broadband connection in the Dell laptop

  Hi mfadhelmu,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. you receive messages or error codes?

  4. have you updated all device drivers?

  You can try to launch the Fixit and see if it helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can you get a sata adapter and replace it with a PCI Express so I can install a graphics card in the caddy hd for my laptop. Y at - it means to get an internal or external graphics card?

  Hey!

  I know that you can remove a dvd cart and replace it with a HD you can get a sata adapter and change a PCI express so I can install a graphics card in the caddy hd for my laptop. y at - it means to get an internal or external graphics card? I do not have a slot express pci laptop because a laptop is relatively new.
  
  Original title: laptop computer graphics card
  other cool mods I can do for my laptop. I've already upgraded to ssd and ram and processor.

  Hello

  I do not know such an adapter exists, but it's a hardware problem - I suggest you contact the manufacturer of your laptop with this issue, as well as questions about additional upgrades, you could do.

  These are all the hardware problems, and this site deals with software issues related to the Windows operating system. I'm sorry this isn't the answer you're looking for, but...

  Let me know if this helps you.

  Kind regards

  BearPup

• Questions about the cost and the best specifications for a new Windows 7 computer

  Hello

  I got most of the things that I should include in the purchase of a new computer.

  Things proposed are the following: Please read and tell me if I need it, and the approximate cost.

  8 GB

  12 GB

  A TB

  VIDEO CARD BUSINESS... I'm QUITE CONFUSED as to IF I NEED. SEE MY QUESTION AT THE END.

  Video card: min. 99 (No. built in chip card (or is it... discreate) dunno... two options different which one.)

  Video card: should be mid to high range; at least at first.  They are beginning to take a long power supply

  supply; and can charge the supply too, so invest in a good to start with.

  Question: Can I add a video card later?  Right now I only use the documents and regular pictures.  Later I want to do

  videos of my pictures; not much more.

  LCD or LED display must be top natch; for Photo Editing/cropping or manipulation?  I do not understand what they

  Let's talk about it.     They speak the monitor?   I DO A LOT OF PHOTO EDITING

  PHOTOSHOP.

  Thank you, Zara3511

  A discreet (dedicated) video card is not necessary. You can always add more later if you need the extra graphics power. Its not harmful if you perform a task such as photos and videos. Benefits is its great for games top of range and can future proof your system. If you are working in Photoshop, certainly invest in the discrete video card. Photoshop she likes it.

• OBIEE Bar graphic question

  Hello everyone,

  I want to ask a question about the graphics bar in obiee. How can I change the position of the sign on the right side down?

  Kind regards

  

  Hello

  Go to the properties of the graph-> General-> legend-> top

  Thank you

  Prasanna

• Switchable graphics or in the power saving mode by default

  So, I'm having some not if funny issues with first pro. Today, while trying to edit a video, I noticed that, while trying to read anything in the timeline panel, audio would be read only, and the video in the window of reference would update only after I stopped the video. I use a Samsung series 7 times with AMD Radeon HD 8770 M graphics card and a GPU of 4000 Intell. The problem is when I go in Center of Catalyst to change settings, it is locked on the energy saving mode. I went and changed the name of the executable file for Adobe Premiere Pro CS6, which then allowed me to pass the program in high performance mode, but the same effect was still present. After a lot of research on the forums, I came across an adobe representative who suggested to try opening GPUSniffer in the directory Adobe\Adobe first Pro CS6\. and he ran. This is the screenshot I got when running it in command prompt, so my question is, does it perform a work around? Originally, when I bought this laptop 2 years ago, I have used the first pro without any problems like that. Yes, I would get occasional lag from time to time when there was a lot of effects and things to display in the timeline panel, but it was never as bad, until I had to change the hard drive due to a hard drive failure. The only thing different on this laptop is now than the hard drive itself, which has 1 TB more than the previous. It is still a samsung, and I can assure any and all other programs (which I use) that use graphics cards, use the AMD Radeon HD M 8770. First seems to be the only adobe with this problem product.

  Ridicule me. I found the solution. When I went to open a display window for which was planned on the timeline, I opened the resource monitor, instead of the program window: sequence. When I open program: sequence, the video would be read very well. Thanks for your time, will hide in the nearest corner.

• Is he closer to display the data in graphic format in the OPS?

  Hello Experts,

  I'm working on a feasibility OFA study and I have a question: is there in the OPS, any approach to represent data in graphic format, such as the schema of the Terminal?

  As far as I know, ADF supports this kind of representation and it can be incorporated into the OAF page as region. But it seems to separate server for the ADF, which is not supported in my project (assuming we have only EBS server). And the situation is similar for embedded Analytics OBIEE approach.

  Would like to share your experience or the reference of this kind of solution? Appreciate your help in advance!

  Thank you and best regards,

  Clark

  You can use graphics in the OPS.

  Visit this link: Java Based Technology Blog Sushant: 14. Graphic design in the OPS

  Sushant-

• Photoshop CC 2015 - question for the adjustment layer curves

  Hello

  For some reason any, as I'm checking the black point of the image, it turns completely white. The only way to return to normal is to choose the default option from the preset menu.

  When you do the same thing with the white point, it works OK, as usual.

  Any ideas?

  Thank you.

  "Doesn't seem very unlikely but: does turn off ' use graphics processor" in the Performance preference and restarting Photoshop have a bearing on the question?

  Otherwise, I can't offer any advice better than going but the usual routines of troubleshooting, start by restore preferences after checking all the presets custom actions, patterns, brushes etc. have been recorded:

  t http://blogs.Adobe.com/Crawlspace/2012/07/Photoshop-basic-troubleshooting-steps-to-fix-MOS - issues.html

• I have a question on the use of CS adobe CS6 editing files

  I'm a graphic designer. I have a question on the use of CS adobe CS6 editing files. When I open adobe CS files created at CS6 edition thse I get a variation of the color that I did with the CS version. Please give me an idea about this problem as soon as possible. If you need I can download my problem as a screenshot for clearity

  

  donrulz,

  Are your Edit > settings the same colors?

  Spot colors, such as Pantone (there there were some changes in the CMYK values with new books of color) that you use?

• Is there an easy way to convert graphics (imported from the common library) Composite path?

  Hi all

  This is my problem:

  I had sex with any common library grapch, and I would like to convert to a Composite path. I had been using a manual method (double click on the image and copy the compound path, and then stick it on my main layer).

  question:

  Is there an easy way to convert graphics (imported from the common library) Composite path? as a shortcut, or other?

  Image:

  

  Thank you before and waiting for your responses

  With the object selected, choose Modify > symbol > Break Apart. Then click Modify > ungroup.