model eText sum cause and the payment model.

Similar Questions

• I just bought edition Creative Cloud schoolgirl and her teacher and the payment has been successful, but it seems that I can only download a free trial?

  I just bought edition Creative Cloud schoolgirl and her teacher and the payment has been successful, but it seems that I can only download a free trial for the entire application?

  And I checked the FAQ, it says that "no serial number is required for membership or subscription plan products such as Creative clouds - the student and the teacher.» Simply sign in with your Adobe ID to activate your membership. »

  However when I tried to login with my ID on Adobe Application Manager, he always says that it can't find the order and suggest me to buy a.

  I really wonder how I can work through this?

  Please see the links below.

  • Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
  • Applications creative Cloud back in test mode after an update until 2015 for CC

  Also, make sure you use the right adobe ID to log in.

  Hope this will help you.

  Kind regards

  Hervé Khare

• I just bought creative editing student and teacher of clouds and the payment got through, but I can only download a free trial period?

  I just bought creative editing student and teacher of clouds and the payment got through, but I can only download a free trial period?

  Hello

  Please see buy your student and teacher edition purchase, convert a redemption to a serial code, etc..

  Hope that helps!

  Kind regards

  Sheena

• Number of the invoice and the payment bank number query

  Hi all

  I need

  (1) $vendor_name (Tprt Workbench screen in Payables invoice number)

  Name of Bank 2)

  (3) invoice_num

  (4) term-for account number (from Workbench screen in accounts payable invoice)

  Note: I need to pass $vendor_name

  Can you please give me a code?

  Hello

  Tested this query in your database? I don't get all the lines

  My requirement is

  Who are the suppliers they have not with payment account banking Number(in Payables Invoice Work Bench)

  Finally, I found the solution.

  SELECT as.vendor_name 'VENDOR NAME',

  invoice_num,

  iebv .bank_name "NAME of the BANK."

  IEBA.bank_account_num 'BANK ACCOUNT NUMBER',

  IEBA.masked_bank_account_num

  OF ap.ap_suppliers

  AI ap_invoices_all,

  ieba iby_ext_bank_accounts,

  iby_account_owners Wai,

  iby_ext_banks_v iebv

  WHERE 1 = 1

  AND as.vendor_id = ai.vendor_id

  AND iao.account_owner_party_id = aps.party_id

  AND ieba.ext_bank_account_id = iao.ext_bank_account_id

  AND ieba.bank_id = iebv .bank_party_id

  AND $vendor_name = '. '

  AND ai.payment_status_flag = n

  AND ai.external_bank_account_id IS NULL

• Communication between the page background and the foreground page

  So I understand if you have the following:

  This means that when the unit starts, listener.html will be executed (in the sense that there is no UI element, just javascripts).

  Is - this here anyway for the listener.html file send all information to index.html when it starts? How the javascript code would work in this case (for example if you declare global variables in listener.html, index.html sees it)?

  If you had the two entry points to the same page (so background src = "index.html" as well), which would change anything?

  The use case can be if the listener.html had a setInterval function runs every so often to calculate things, and then the application would be able to use this information.

  I have to have just the page of listener.html send the information to a server, and then retrieve it via a server call the homepage?

  Thank you.

  What if you had both entry points to the same page (so background src="index.html" as well), would that change anything?
  

  This would do the trick. This means that your page is already starting to load at startup, so if you placed your algorithms on your page 'onload' event, it should work.

  And the payment of a bonus, I also used this tip to load my scripts (in particular the JQuery that takes a while to load) so that when the user opens your application after startup, you'd be on your home page.

  Hope this helps

• Can not buy plan CC as the payment page is stuck on US & I am UK

  My free subscription is in place and I'm buying a plan of creative cloud. However, I am in the United Kingdom, and the payment page is stuck on US. My Adobe ID says I'm in the United Kingdom (and I've always been) so I do not understand this.

  During this time I can't pay, and the lines are not open until Monday.

  I would set aside today to work on Photoshop and Lightroom, and I can't have everything.

  Any suggestions? Thank you very much.

  Please try to pricing and membership creative cloud plans | Adobe Creative Cloud to place the order online.

  In case you encounter any problem please contact support

  Contact us | Adobe

  Concerning

  Kuldeep

• Im trying to set up monthly payroll. IM currently living in the United Kingdom, but the payment of adobe won't let me only select the India? It is also giving me the price in rupiah instead of books?

  Im trying to set up monthly payroll. IM currently living in the United Kingdom, but the payment of adobe won't let me only select the India? It is also giving me the price in rupiah instead of books?

  Please check which country is using your Adobe ID. The country must match the store you purchase and the payment address.

  See also:

  FAQ: Why my purchase showing the wrong currency?

  FAQ: How can I view Adobe web pages in another language?

  FAQ: How can I change the country associated with my Adobe ID?

  You can see answers to other frequently asked questions creative cloud here:

  Forum FAQ Creative_Cloud

• The payment method does not load

  I am buying Flash Pro and the payment method does not load. I try to get the single App membership. I waited for 2 hours, nothing happens.

  I'm sorry you're having trouble to purchase. For assistance, please contact sales:

  http://www.Adobe.com/about-Adobe/contact.html

• Using anchors and the parameters in the url cflocation

  I think that the main problem is that I am trying to use an anchor in a spry tab. I have four tabs on my page of results (general, payments, notes and comments) which General is the default value. When I add a record (in this case, a payment record), I want that it will automatically to the results for the specified project and the payments tab page. My code will take you to the correct page with the correct project number, but no matter where I plant the anchor on the payments tab, it always opens in the 'general' tab by default. Here is my code:
  

  Thanks Azadi. I found the answer for the Spry tabs on http://foundationphp.com/tutorials/spry_url_utils.php.
  http://foundationphp.com/tutorials/spry_url_utils.php It is very involved and includes the download of the last file for Spry 1.6.1 and some coding javascript - but I tested and it works.

• I want to download free applications, but it doesn't let me do it cause I have a problem with my payment, I try to remove my debit card and the option did not appear, I can't choose no for the payment, what can I do?

  I want to download free applications, but it doesn't let me do it cause I have a problem with my payment, I try to remove my debit card and the option did not appear, I can't choose no for the payment, what can I do? This happen after I bought some coins for a game

  You must settle the debt until you can download something else of the podcast episodes on the iTunes Store or select None as the payment option.

  (142394)

• Motherboard model H535 failure - the type of machine and the serial number invalid after replacement

  Does anyone know how to set the new Type of Machine and the serial number after a motherboard for a replacement model H535?

  The motherboard has recently failed on my model H535 (7 months after the expiration of the warranty - thanks, Lenovo). No local garage would agree to replace due to its nature of owners (thanks, Lenovo). I spent about four hours on the phone being bounced into back-and-forth between the many support staff (usually combined) Lenovo in sales, technical support, support of parts of IBM and various other departments (thanks, Lenovo), which one has suggested that I might have to try to find a motherboard on Ebay or Amazon for my computer in less-than-2-year-old. However, I finally get to someone at Lenovo, which has been able to sell a motherboard - for 2/3 of the cost of the original computer.

  Now, I installed the motherboard, and it works. However, during each boot, I get a POST with two beeps error which reads as follows:

  00CE error: Machine Type and serial number is INVALID

  Start of manufacturing sequence is taken if no selection is made

  I presume that the BIOS on the new motherboard must be programmed with the right Type of Machine and the serial number of my computer. I've read various things on the Internet about what to do, as updating the BIOS (I can not even find a BIOS under "downloads" of support for the H535 - thanks, Lenovo model), using WinPhlash (I apparently need one kind of BIOS ROM file to make it work, I don't have), getting a Lenovo hardware maintenance disk for my model (which apparently isn't available for other special people only me - thanks Lenovo), etc.

  The waiting time for Lenovo support are ridiculously long, and almost every customer support person is ridiculously uninformed on the difference between one of their computer models, and even less their motherboards (thanks, Lenovo). I am amazed and extremely frustrated. It shouldn't be rocket science.

  On a side note, I initially bought the computer from Staples with a credit card with extended warranty protection, which means I can get a refund for repair. Although the motherboard came with a packing list, no Bill has been provided by Lenovo, and I couldn't make them send one - or maybe even with success to explain what a Bill is (thanks, Lenovo).

  Well, Lenovo support was useless, and any alleged authorized suppliers were in fact still suppliers or could help with my problem. But I was finally able to fix it myself. Once I found the right piece of software, it has been fixed in less than a minute.

  My BIOS is by American Megatrends, and I discovered that they have a set of utilities that includes a called AMIDEDOS. It is intended for manufacturers to be able to change the strings of text stored in the BIOS for things like the manufacturer, product name, Version, number series, UUID, SKU number, family, etc., that is what I had to do. It is not intended for use by consumers, but it's there.

  When I ran the "DMIEdit.exe" program AMIDEDOS (clicked and ran as administrator from 10 Windows) and click on "System information" from the list, I saw "Product Name | STRING | Invalid' and ' serial number | STRING | NOT VALID ". The other fields appeared to have valid entries. I double-clicked on the fields valid and changed their "H535 model" and the serial number of my computer, respectively and then clicked on "Update all" at the top.

  Much to my surprise, he reported that he had successfully registered the new information. And, perhaps even more surprising is the fact that, when I rebooted, the double beep and the warning about the type of computer not valid and serial number have disappeared. In addition, the BIOS showed I had entered the new values, and the 'Manufacturing Boot Sequence' option (I understand can be much slower than a normal boot) had disappeared.

  Again, I'm a little surprised simple it was actually solve the problem once I got the correct software, or Lenovo part nor American Megatrends apparently offers to the owners, and it took hours and hours of research and research to understand. Use this information at your own risk, however, as playing with BIOS apparently can lead to problems not easily solved. That said, the modification of these text strings seems relatively safe.

  I will mention that I also ended up changing the method of "LEGACY" to "UEFI" boot in the BIOS after noticing that the selection.

• How can I get the serial number and the type of model of the target, I inserted in the pc

  Hello

  I want to find the type or model of the usb card of nor and the serial number of this one when I connected to the pc.

  But how can I do? can someone help me?

  I did something, but the same error apears when I executate it!

  Thank you!

  Try the attached VI. It should help you, its working fine in my PC and I got the info about my simulated device.

• F9H60UA #ABA: what "product range" and the model are my hp laptop?

  Hello

  Sell my HP like new on eBay, I tragically lack the original box or any documentation. I don't know how to fill out some fields on the eBay site:

  1 range. As far as I know it's a HP 15 laptop. Is - this accurate enough? How could I know if it is a Pavilion, VAIO, Presario, etc.. ? There is no external marks.

  2 model. Stumped on this one completely. He will have to leave the field blank unless you have a way for me to look it up.

  3 Edition operating system. I know I have Windows 8.1. How will I know if it is Home Premium, professional or other?

  4. type of graphics processing. I know that I have an AMD E-Series processor. This would be dedicated, integrated / edge or hybrid?

  Thanks for any help you might be. If there is no way you can provide answers from the information I have provided, I just leave the fields blank and the wing.

  See you soon,.

  Bruce

  Hello

  Please use the following specifications:

  http://support.HP.com/us-en/document/c04051951

  It's a plain 15 HP, no other line. Its model name: HP 15-g019wm. It comes with 8.1 Windows 64-bit (standard version).

  It is a low-end, inexpensive machine.

  Concerning

• Activation XP to replace the same brand and the motherboard model

  The PC in question had an OEM of XP without CD installation.  I have a good COA sticker. I've had damage to the motherboard as a result of a power of 250 BestTec supply failure. After a new PSU, I replaced the motherboard with exactly the same brand and model was original.  This was done in good faith, based on KB824125 which States that this should not need a new license.   However, now I can not find a way forward so that Microsoft "reactivate".   How can I get the activation?

  Additional details:

  All the files on the hard drive are OK, including Windows XP. The BIOS works fine.

  When I try to start Windows, he says that activation is required.  Activation of the Internet requires Windows, so that leaves me with activation by telephone.  50-digit ID is reported as invalid, and the automated system hang up.

  KB824125 seems to fix my problem and specifically says: "If the motherboard is replaced due to a fault, the user doesn't have to acquire a new license of operating system of the computer. The replacement of the motherboard must be the same brand and model or [options]. "There is no statement as to how to apply it.

  When I go to eMachines, they indicate very correctly the warranty is over and ask that I go to the web site of the software publisher.

  When I called Microsoft, I am led down an automated tree that ends with the possibility of buying support.

  I fixed the PC, and now my software appears as illegal.  Can someone tell me which way in the maze will solve this problem?

  I'd be happy to send the old motherboard to Microsoft, if that's their problem.

  "BobL39" wrote in message News: e27a096a-1b58-4647-8c9d-98e9e0111b65...

  The PC in question had an OEM of XP without CD installation.  I have a good COA sticker. I've had damage to the motherboard as a result of a power of 250 BestTec supply failure. After a new PSU, I replaced the motherboard with exactly the same brand and model was original.  This was done in good faith, based on KB824125 which States that this should not need a new license.   However, now I can not find a way forward so that Microsoft "reactivate".   How can I get the activation?

  Additional details:

  All the files on the hard drive are OK, including Windows XP. The BIOS works fine.

  When I try to start Windows, he says that activation is required.  Activation of the Internet requires Windows, so that leaves me with activation by telephone.  50-digit ID is reported as invalid, and the automated system hang up.

  KB824125 seems to fix my problem and specifically says: "If the motherboard is replaced due to a fault, the user doesn't have to acquire a new license of operating system of the computer. The replacement of the motherboard must be the same brand and model or [options]. "There is no statement as to how to apply it.

  When I go to eMachines, they indicate very correctly the warranty is over and ask that I go to the web site of the software publisher.

  When I called Microsoft, I am led down an automated tree that ends with the possibility of buying support.

  I fixed the PC, and now my software appears as illegal.  Can someone tell me which way in the maze will solve this problem?

  I'd be happy to send the old motherboard to Microsoft, if that's their problem.

  You can try the phone activation - this time, when the automated system asks you what service you need, do NOT - this should oblige the operator to pick up. They will help you.
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• What a privilege it must compare the roles and the users of the model

  Hi all
  
  I want to compare the roles that I created in the model and the roles I have in the database,
  I want to know if is posible to compare objects that you have granted to roles between the model and the database.
  
  
  the problem is perhaps because the user I selected for the connection to the database has no privilege enough,
  could you tell me, please
  what privileges needs of the user of the connection in order to compare with the roles, packages and other objects in the physical model?
  
  Thanks in advance

  Hello

  I'm afraid, it is not possible to compare users, roles, or packages at the moment.

  David