SCSI/RAID Host Controller, reports "tv_ConfigMgrErr39".

Similar Questions

• Stop error SCSI/RAID Host Controller Windows 7 upgrade

  Hey, I hope someone can help me here. I get the following error message when you try to upgrade to Windows 7 Home Premium 64-bit Vista Home Premium 64-bit:

  The upgrade of Windows will affect the following programs or devices:

  These devices may not work properly after the upgrade. Before the upgrade, we recommend that you update the drivers for those devices. Cancel the upgrade, open the control panel and search for "update device drivers" or go to the website of the manufacturer of the device to search for updated drivers.

  • • Storage controllers: SCSI/RAID Host Controller

  Upgrade Advisor does not list the problem but I agreed to look for updates during the installation and he did then. My computer. is a HP Pavilion Slimline s3650f model.

  Upgrade Advisor listed issues were:

  -Hardware Diagnostic tools - update available (the latest version of Vista 64 bit is installed. "I think I can wait until Windows 7 is installed to update, right?)

  -Labelprint (version 2.2.2913 came pre-installed on my computer. I Sure Thing CD Labeler so I can uninstall if necessary, but I doubt that would be the problem)

  -Photosmart C4500 (DOT4PRINT) - status: unknown (I have the C4599 printer and a search on the windows Compatibility Center site 7 it lists as compatible.) I'll check the updates of driver after upgrade).

  I Lavalys Everest Ultimate Edition and did some looking into my COMP specs... I'm sure you guys have not need all this information, but I prefer to give too much information than not enough.
  I'll start by providing 3 pictures the computer on my computer summary:

  http://img33.imageshack.us/img33/505/everestsysinfo1.jpg
  http://img33.imageshack.us/img33/4145/everestsysinfo2.jpg
  http://img33.imageshack.us/img33/6122/everestsysinfo3.jpg

  Now some info BIOS & Motherboard:
  http://img33.imageshack.us/img33/4035/everestdmibiosinfo.jpg
  http://img39.imageshack.us/img39/5358/biosinfo.jpg
  http://img39.imageshack.us/img39/9362/everestmotherboardinfo.jpg

  I did a search on the support of Microsoft answers forum and found some people HERE (I've posted there but nobody answered me. This is an old thread. I'll start a new if necessary.) saying updated their BIOS got rid of this message, but I installed 5.18 version (as well as from 06/2008 & later on the site of HP in 2008-09. Could it be the cause?)

  However, as you can see there is a link to upgrade the BIOS in Everest that takes you to esupport.com which you install biosagentplus and offer a free scan.
  Here are pictures of my results:
  http://img194.imageshack.us/img194/9411/biosagentpluscomsystems.jpg
  http://img194.imageshack.us/img194/2433/biosagentpluscomsystemsu.jpg

  Also, I followed the download link for the BIOS to asus.com looking for some info but finds it difficult to find anything. Maybe I'm in the right place.

  I don't have a method further up until I get some other opinions on the situation. Is it possible that a program is causing this problem or is it really a hardware problem?

  I would add also on an attempt to upgrade it has no force to leave me and tried to install. In my opinion, he got completely installed and got to the final reboot but it gave an error that it could not be installed and rolled back to Vista.

  If more info is needed please ask. I hope that someone has ideas. If this isn't the case, I can try the Microsoft forum.

  Dave

  Well, I finally got upgraded to Windows 7 just now here and my boy I feel like a fool d * n. I unplugged my external hard drive, uninstalled my printer and other external usb devices and was about to start uplugging my tuner TV, graphics card, thinking that one of them was the problem, then I uninstalled Alcohol 120% and poof, the SCSI/RAID host controller error disappeared. Also just to be sure, that I uninstalled Kaspersky Internet Security to ensure that it would not interfere with the installation and reinstalled after.

  Still a lot of things to study but most of the time. The only problem I've come across so far is the HP Solution Center detects no not my printer. I printed a test page, there is work. I do not know if the program just needs updating or if I need to uninstall and reinstall the software, but it shouldn't be a major issue anyway.

  So far the system running much more quickly than before and I'm loving the new features. I will continue to pick up my pride on the floor that I check things and remind anyone that gets this issue uninstall Alcohol or Daemon Tools, if they are installed.

• Satellite M40X-259: SCSI/RAID host controller

  Unfortunately, I uninstalled the SCSI and RAID drivers :( Where can I download this driver for my laptop? Help me! Thank you!

  Can you please tell me what is the problem with your laptop? If you check the list of portable software there is no SCSI or RAID driver?

  Tell me please what is the problem here. What happens when you start your laptop?

• Controller SCSI Raid ESXi 5.5 recommendation

  I'm moving the ESXi 5.5 to another server by using the following:

  
  

  Server Dell R610 with 12G of ram and a Dell PowerVaul 220 s Raid 5 with 12, space 1, 5 - T HD sata

  The Raid Controller is a Intel SRCU42E Ultra320 SCSI PCI-Express X 8 with ext 2 x 68pin ports.

  
  

  I get the error ' call 'HostDatastoreSystem. " 'Of object' CreateVmfsDatastore 'ha-datastoresystem' on ESXi when you try to add storage. I even installed 5.1 but with the same results.

  
  

  Later, after much research and troubleshooting, as well as headaches, I discover that the SCSI Raid card was not compatible with ESXI 5.1, 5.5 only with 4.1 or 4.0

  I begin to scan the cards SCSI RAID but difficult to get one with the above specifications that could be compatible with ESXI 5.5

  
  

  Run out of tricks and do not have the ability to turn the Dell PowerVault 220 s

  May suggest a SCSI Raid PCI - e card with a port Ext. 68pin compatible 5.1 to 5.5? All of the recommendations, difficulty, work around?

  Thank you

  ESXi 5.5 system requirements

  When you install or upgrade to ESXi 5.5, ensure that the host meets these minimum hardware configurations supported by ESXi 5.5:

  1. Your equipment is compatible on the VMware Compatibility Guide. This includes:
  • Systems compatibility
  • Compatibility I/O (network adapters and HBAS)
  • Storage compatibility
  • Backup software compatibility
• You have a 64-bit processor. VMware ESXi 5.5 only installs and runs on 64-bit x 86 CPU servers. He argues also that LAHF and SAHF CPU instructions.
• You have a computer with at least two hearts 5.5 ESXi host.
• The NX/XD bit is set for the CPU in the BIOS.
• Your processor is supported. ESXi supports a wide range of x 64 of multicore. For a complete list of taken processors supported,
• You have 4 GB of RAM. This is the minimum required to install ESXi 5.5. Provide at least 8 GB of RAM to take full advantage of the features of ESXi and run virtual machines in typical production environments.
• Support for hardware virtualization (Intel VT - x or AMD RVI) is enabled on x 64 CPU (to support 64-bit virtual machines). For a complete list of operating systems that are supported with ESXi, hosts running virtual machines with 64-bit operating systems have these hardware requirements:
  • For AMD Opteron systems, processors must be Opteron Rev E or later.
  • For Intel Xeon systems, processors must include support for Intel Virtualization Technology (VT). Many servers which may include processors with VT support VT disabled by default, so you have to manually enable VT. If your CPU support VT, but you do not see this option in the BIOS, contact your provider to request a version of BIOS that allows to enable VT support.

    Note: to determine if your server has 64-bit VMware support, download The utility of Identification of CPU on the VMware site.

• You have one or more Gigabit or 10 GB Ethernet controllers. For a list of network adapter models supported, refer to the VMware Compatibility Guide.
• You with any combination of one or more storage controllers are:
  • Basic SCSI controllers. Adaptec Ultra-160 or Ultra-320, LSI Logic Fusion-MPT and most NCR/Symbios SCSI.
  • RAID controllers. Reference Dell PERC (Adaptec RAID and LSI MegaRAID) RAID HP Smart Array or IBM ServeRAID controllers (Adaptec).
• You have a SCSI drive or a local, off-grid, RAID LUN with unpartitioned for VMS space.
• For Serial ATA (SATA), a drive connected through taken SAS controllers supported or supported integrated SATA controllers. SATA drives are supposed to be remote, no premises. These discs are not used as a partition to scrape by default because they are too far away.

  Note: you cannot connect a SATA CD-ROM device to a virtual machine on a host ESXi 5.5. To use the SATA CD-ROM device, you must use the IDE emulation mode.

• You use a supported storage system. ESXi 5.5 supports the installation and start-up of these storage systems:
  • SATA drives. SATA drives connected behind the SAS controllers supported or SATA controllers support built-in.
    • LSI1068E (LSISAS3442E)
    • LSI1068 (SAS 5)
    • IBM ServeRAID 8K SAS controller
    • Smart Array P400/256 controller
    • 5.0.1 Dell PERC controller
  • SATA drives. Support SATA edge include:
    • Intel ICH9
    • NVIDIA MCP55
    • ServerWorks HT1000

  Note: ESXi does not support using SATA internal disks local to the host server to create VMFS stores of data that is shared between multiple ESXi hosts.

• You have disks Serial Attached SCSI (SAS) supported for ESXi 5.5 installation and to store virtual machines in VMFS partitions.
• You have dedicated disk SAN Fibre Channel or iSCSI.
• You have USB devices supported for ESXi installation.
• You can install and start ESXi a FCoE LUN using VMware software FCoE adapters and network with FCoE adapters discharge capacity
. See the documentation for storage for more information about installing and initializing ESXi with vSphere FCoE software.

• ESXi 4.1: Got USB to work on virtual computers.  But VM Windows reports that no host controller USB HI-SPEED installed... »

  Just upgraded to ESXi 4.0 to 4.1 and see some signs of progress on the issue of the support of USB devices.  I was able to add the brand of my Dell UPS (made by Eaton) and SBS 2008 it has detected and power management now shows battery and plugged in settings Finally I can safely shut down or Hibernate my VMs!  I wonder if I can install this connection USB uninterruptible power supplies on all my virtual machines of Windows and get the native Windows UPS management?  Only way to tell, I'll post back once I have it try...

  Back to the original question: when I tried to add 2 different USB, Windows memory keys reported an error of installation:

  

  Then I also have a popup telling me that no HI - SPEED Host controller not installed.  In addition, USB memory sticks do not show as readers, which no doubt associated with the forst above error screen.

  I'll restart the SBS 2008 VM and see if that helps.

  Thanks for posting.

  You don't need to worry too stop host, maybe unless your ca stop on power failure and you have an extended battery operation and the host is likely to overheat in this situation.  You can use plink SSH on ESXi host application turn off (must enable SSH first of course) or use a properly designed perl script.

  http://blog.peacon.co.UK

  Please give points for any helpful answer.

• SCSI Raid to VM card

  Hello!

  I would like to ask if anyone knows a way to map a SCSI Raid directly to a virtual computer.

  We have a Windows 2003 server with a 1, 5 TB SCSI Raid attached via a U320 SCSI-controller storage of some data and backups. Now this rather old server died and I want to integrate the raid into our virtualized infrastructure. One of our 4 ESXi servers has the necessary SCSI controller, so I was wondering if there is a way to connect the raid to this server and map the volume directly to a virtual machine on that host (to get access to the data that is stored on the raid again).

  Yes, RDM should solve this problem;

  Please save your number of logical unit first, and then create RDM on your logical unit number, for example

  vmkfstools - z /vmfs/devices/disks/naa.*** /vmfs/volumes//lun.vmdk

  then add lun.vmdk to your virtual machine,

  Binoche, VMware VCP, Cisco CCNA

• need to install a host controller universal usb highspeed for my hi-speed devices

  I still see a warning that (my device could perform fi more fast it was connected to hi speed U.S.B?)

  If you see a message like this:

  This USB device can perform faster if you connect it to a Hi-Speed USB 2.0 port.
  For a list of available ports, click here.

  This is an informational message and not an error message.

  You can see if you can actually fix it, or you can decide to disable your USB device messages and will see the message.  If you disable the USB of reporting mechanism, you will not be able to see all messages from USB devices either.

  Disable the notification mechanism is considered to be the 'fixing' to some people, but not for me.

  It would be better to fix it in fact instead of just to disable the notification mechanism.

  Let's see what you have right now:

  Open the Device Manager by clicking Start, run and enter in the box:

  %SystemRoot%\System32\devmgmt.msc

  Click OK.

  Do you see any red Xs or yellow? s in the list of devices and if so, in what areas?

  Now, expand the Universal Serial Bus controllers section and look for the words:

  Host improved or enhanced PCI to USB Host Controller controller

  Here is a sample screenshot of what to look for in your device manager:

  http://img43.imageshack.us/img43/2466/devicemanagerenhanced.PNG

  You see the word enhanced in all sections under Universal Serial Bus controllers section?

  If you do not see the word enhanced, you probably just update your device USB drivers.  Until you do, you will continue to see the annoying reminder message.

  If you want another set of eyeballs on your information to find out what you have, follow these steps:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  For more information of USB port, expand the components section, click on USB, click on edit, select all, copy and then past he feedback here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

• HP ENVY 14-2000 CTO - Renesas USB 3.0 Host controller 'start of cannont device (Code 10)"

  HP Envy 14 using, Windows 7 ultimate (64 bit), with a Targus USB 3.0 docking station. Use laptop for almost a year. Relatively few problems, but more and more lately. Last is a failure of the device. Device Manager reports a failure with the Renesas Electronics USB 3.0 Host controller and says 'Cannont start (Code 10) device' in the properties. I unplugged/plugged the USB cables. I have powered down/up to the docking station. I have disabled/re-enabled USB 3.0 device. I have uninstalled/reinstalled USB 3.0 driver. (Worm 2.0.34.0, of sp53286.exe on the site of HP supprt) I made this other laptop and docking station drivers are up-to-date. I rebooted several times... Is there a solution?... or my USB 3.0 chipset out crapped?

  Solved. Downloaded driver (not available on the HP support site) http://drivers.softpedia.com/get/Other-DRIVERS-TOOLS/Renesas/Renesas-Electronics-uPD720200-uPD720200A-USB-30-Driver-21320.shtml 2.1.32.0

• Recurring question Renesas Electronics USB 3.0 Host Controller

  Hello

  I get this question contextual all a few days/weeks/months and she has been driving me crazy, but I think I have narrowed down and would like tips are possible please.

  Question:

  USB 3.0 Host Controller error Code 10

  USB 3.0 ports front and back go dead.

  Cause:

  I don't know at all, I feel that perhaps it is TuneUp Utilities 2013/14 or maybe my smart phone Samsung Galaxy S3.

  Difficulty:

  Uninstall/remove up to present drivers, by restarting and installing fresh drivers do not work. He used also but the last 2-3 times, I couldn't get the error to go away as a result of this process.

  I talked to a technician Support of Dell by phone and by working together, we found to be a BIOS problem, since a full format of the PC still had the error when he brought upward once again, leaving only the hardware itself (USB 3.0 ports) or BIOS.

  Bringing F2 menu and make a F9 reset by default a F10 save and exit solves this problem, every time.

  So what is a BIOS issue or a compatibility issue?

  I know how to fix it temporarily, but I don't know the cause.

  Data sheet:

  Alienware Aurora R4

  3970 X 6 @ 3.5 extreme core I7 (turbo boost 4.3)

  NVIDIA GeForce GTX 690

  Windows 7 Ultimate 64 bit

  Internet Explore 10

  32 RAM

  Liquid cooled

  3 TB Seagate hard drive

  BIOS A07

  If you would like more information, please let me know.

  I have no discharge reports that the PC did not yet have a BSOD, but this is a replacement PC after the last (same PC and specs) had exactly the same problem and basically could not be fixed by a Dell technician.

  OK, that sounds good.

  What I might suggest at this stage is to put the service 'Windows Driver Foundation - User-mode Driver Framework' to 'auto' as this can help with any problem of detection:

  Start > type services.msc in the box "search programs and files", then press "Enter".

  In the right window to scroll down to the "Windows Driver Foundation - User-mode Driver Framework" service and double-click it and set the "Startup type" to "Automatic" > OK

  Then, restart the computer.

  Then, if Renesas USB 3.0 controller number happen can you create and provide the .evtx, and nfo files to the exact time.

• DRIVER_POWER_STATE_FAILURE & USB - IF xHCI USB host controller problems

  Greetings,

  Recently I've known APC with pilot failure current state every time I try to turn it on or reactivate my new Zenbook from ASUS. It takes forever so she actually turn on which is also a new problem. I tried to run a Windows troubleshooting from the center of the action and he said that there is a problem with the USB - IF xHC USB HOst Controller driver. He recommends that I re - install this driver, but does not give me the opportunity to do so. I am downloading a link to my Minidump with the hope that someone could help me.
  Minidump SkyDrive link: https://skydrive.live.com/redir?resid=2FA3EA1D7C87B0CD! 300 & authkey =! AMQqBm28WoEP7Jk
  Thank you in advance.

  Just to add to the excsd.sys advice of zig - zag seem to be also involved in the accident:

  1: kd >! devstack fffffa80046e97f0
  ! DevObj! DrvObj! DevExt ObjectName
  fffffa80051738a0 \Driver\partmgr fffffa80051739f0 InfoMask field not found for _OBJECT_HEADER to fffffa8005173870

  fffffa8005172880 cannot load image \SystemRoot\system32\DRIVERS\excsd.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for excsd.sys
  ERROR: Module load completed but symbols can be loaded for excsd.sys
  \Driver\excsd fffffa80051729d0 InfoMask field not found for _OBJECT_HEADER to fffffa8005172850

  fffffa80051dd060 \Driver\disk fffffa80051dd1b0 cannot read the offbeat info from nt! ObpInfoMaskToOffset fffffa80046e75d0 \Driver\ACPI fffffa8003bfb590
  > fffffa80046e97f0 \Driver\iaStorA fffffa80046e9940 cannot read the offbeat info from nt! ObpInfoMaskToOffset
  

  The excsd.sys is a component of ExpressCache.

  The same laptop with a similar error has been reported in the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-performance/driverpowerstatefailure-Windows-8-Pro/572259fe-7525-4056-ABAA-1868286e3018

  As in this thread study ExpressCache uninstall, update the driver of the TSRI and then, if you wish, reinstall the latest version of ExpressCache.

  ExpressCache is not a required software, you do not have to reinstall if uninstall you.

• Satellite Pro 6100 - USB host controller

  USB host controller

  Hello

  And what do you know about USB host controller? Do you need drivers or you have problems with the USB ports?

  Please explain your problem detailed in a few English phrases that others here can help you.

• USB - IF xHCI USB Host Controller

  Hello

  I found the USB - if xHCI host USB in Device Manager not compatible controller and the error is (this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)).

  The operating system is Windows 8.

  Please yor need support to work this device correctly.

  I want you to know I solved this problem on my 7200 DV7T. I downloaded the latest drivers from Intel's WiDi:

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & DwnldID = 22016 & ProdId = 3227 & lang = eng

  These seem to be more recent than those provided by HP. I have installed all drivers you first (display, chipset, etc.), then I installed the WiDi software (link above). The USB - if USB Host Controller xHCI has been recognized very well. No more unknown device.

  I hope this helps.

  Jim

• New SSD in the unrecognized NVMe host controller card

  I bought a chip Samsung SSD of 951 m2, discovered that I need a host controller card for it, got one, installed the assembly and found out that it is not recognized as a mass storage device, or a disk, or anything else, but a Council NVMe and only in System Profiler. The Samsung chip is invisible.  Nothing on the desktop. After looking into it, it seems that the Apple of NVMe version is non-standard. The Mac Pro is a 5.1. 2010-2012, the operating system is El Capitan 10.11.3. NVMe controller is a host AbleConn PCIe NVMe m2 adapter. This mixture is ever going to work? Apple will come with a driver who run it it?

  Currently money Mac Pro Tower do not support NVMe but who may be coming

  http://www.macvidcards.com/blog/nVMe-coming-to-OS-x-for-all-machines-will-be-Ava EZ-here-soon

  NVMe is used on the new MacBooks

  http://www.MacRumors.com/2015/04/11/nVMe-Mac-OS-x/

• M100: Need driver for SD Card Host Controller & IR Port

  Hello

  Can someone tell me if I can get the drivers for M100 Secure Digital (SD) Host Controller Card?

  I had an accident on my M100 and had to rebuild my machine, everything works fine expect the IR Port & SD Card. Can someone tell me if I can get the drivers.

  REDA

  Hello

  Usually the IR port doesn't need any further pilots.
  It uses a standard Windows driver and you won't find any Toshiba IrDA drivers for this device. It doesn t exist.
  This route allows to install the IrDA driver;
  C:\Windows\System32

  There you should find all the standard Microsoft drivers for common devices

  PS: All drivers from Toshiba here:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Saturday A300 - USB ICH8 Family USB Universal Host Controller does not work

  Device: Intel(r) ICH8 Family USB Universal Host Controller - 2830 until 2836 and 283 has

  DriverVersion is: 8.0.0.1008
  DriverDate: 15.09.2006

  does not work!

  Can someone help me? Where can I find the real driver?

  Thanks in advance.

  Chris

  The Intel Chipset driver support USB drivers. You can download it from the Support/Drivers from Toshiba website.

  But if you have recently installed a strange USB device (perhaps a keyboard/mouse/drive HARD USB), the driver may be contradictory. If you remove this driver from Control Panel-> features of the program first, and then reinstall the Intel Chipset driver.