SCSM 2010 first synchronization failed

Similar Questions

• Error blackBerry software - synchronization failed, impossible to deal with organizing data

  I had a Q10 Blackberry last week.  I downloaded and installed the PC of Blackberry link 1.2.2.13 version.  Two-way sync USB worked fine.  Now, all of a sudden, I get the error message "synchronization failed, impossible to deal with organizing data."   I tried to reset the synchronization options, but not joy.  Also tried to uninstall and reinstall the software Link 1.2.2.13, once again no joy.  Any suggestions?

  UPDATE: I spent 4 hours on the phone and the remote session with the help of Blackberry last night.  After doing some troubleshooting to isolate the problem, determined that something on the device caused the problem of Outlook synchronization. One thing I've learned, it's that it can take a long time to synchronize and even though the progress of the screen may appear frozen, let it go until the end - sometimes it took 20-25 minutes, but eventually completed. Here's the process we went through - I would recommend appellant help BB and work with them to make sure you have not accidentally delete Outlook contacts and calendar of important information of your PC or BB device!.

  (1) we tried an uninstall/reinstall the PC Link BB software and that did not fix the problem.

  (2) to isolate the problem of synchronization.  We first did a synchronization of 2 channels 'contacts' and 'calendar' and who was a failure.  Then did a synchronization of only 2 channels 'contacts' and managed.  Then did a synchronization of only 2-way 'calendar' and that was a failure - so the problem was linked to calendar data and something on the device has been the cause of the problem or corrupted.

  (3) link BB allowing us to make a backup complete unit.

  4) then decided to do a 'Wipe security' on the device of BB Q10 to erase all the data and settings and return to a clean boot device configuration.  I was nervous about it - make double sure that Outlook all contacts and calendar data on the device and the PC are completely backed up in case something bad happens.  Nothing serious happened, but I was gald, we made the backup!

  (5) has the 'Security Wipe' feature (on the device, the settings > Security and privacy > wipe security) and phone rebooted without problems (takes a while to do).
  

  (6) then used link BB to do a sync test 1 channel 'contacts and calendar' from PC to device.  It worked without problem.

  (7) we then used BB link do a "restore" full backup of device, as we did in step 3 above.  It takes a while to make and was a success.

  (8) once the restoration of the aircraft was complete, BB link configured to perform a synchronization of 2 channels of the two 'contacts' and 'calendar '.  Does the synchronization and was a success.  Did a test by adding the new entry of the calendar on PC and did another 2-way sync - all worked very well.  Seems that the problem has been corrected, but will follow in the coming days.

  Lessons learned:

  (1) If you have a lot of Outlook contacts and calendar entries, the synchronization may take a long time.  Be patient and let it run - even if it seems stuck, etc!

  (2) save all Outlook data on the device and the PC to make sure that you have a backup something bad happened during troubleshooting.  We had not something bad happens, but I was gald we made a backup anyway.

  (2) call BB help - support person, I worked with was fabulous, even if it took some time to work through a patch.

   

• vmmark2 - error - time synchronization failed start/finish

  vmmark2 - error - time synchronization failed start/finish returned RC = 10002, System Error 1326 unknown or wrong password username.

  I provided the correct credentials to connect to the VCserver.  Not sure why she's enclosure.

  Is the VC server credentials or the credentials of vcenter?  These two don't with the same error.

  Without a NTP server, you will need to manually synchronize things to the top and make sure that they don't automatically readjust their time.  Review the TimeChecks.txt file that is generated when executing.  This will tell you how far the individual systems are.  Each system must be within 60 seconds of the first customer.

• Synchronization fails when password synchronization is enabled

  Using Firefox on Arch Linux (same number on 8 Debian), synchronization fails systematically when password synchronization is enabled. I reduced to a few passwords, sync works fine if password synchronization is disabled. I did a master password, and I do not have locally stored passwords.

  Your list of extensions in the system detail list shows the "GNOME keyring password integration" extension, so I guess that this extension is the cause of your problem and the extension is not compatible with sync.
  You could test that by disabling this extension.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Why MobileMe first synchronization alert several times with Vista Outlook 2007 and iPhone 3G?

  I'm in long discussions with Apple Support, which are very polished, but we are not making much progress, after some time and effort. The installation program is Outlook + Vista Business + MobileMe, iPhone 3G. Everything correctly the program installation insofar as Apple is concerned. Everything worked OK. Now, all of a sudden, every time there is a new entry or deletion on Outlook or iPhone, sync (for the most part successful, sometimes not) is followed a few minutes later with a first synchronization Alert, telling me that MobileMe has needed attention because "this time around the first of may you have synced or you have reset your data." The First Alert Sync then you offers a number of options for resolution, including data to merge or replace. Fact is, even if I agree to "merge data" or choose another options presented to me (for example replace MobileMe with data from Outlook), MobileMe never stops with its first Sync alerts, no matter how many times I followed the instructions from Apple mail. What is important, Apple did suggest trying a new Vista user account - and the problem do not appear to arise here, although perhaps a handful of test on a new installation of Outlook inputs would be very difficult. My questions: (1) are there the obvious things that might spoil MobileMe on a particular user account, because of this problem? (2) at - it's not a "bot"? or diagnostic application that Apple or MS could foresee that would actually identify what actually firing off the illogical Sync First Alert? Thanks a lot for all the suggestions for the non-technical user. David, London

  Try assigning to the Office Discussion groups:
  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  All the best!

• BlackBerry Smartphones PRIV - Notes will not save text up to the first synchronization

  I have a Priv of Blackberry that is synched to Office Outlook 2013 professional my desktop, running on Microsoft Exchange.

  A month ago I started having problems with the synchronization of Notes between my mobile and Outlook.  It seems that any text I key in a Note on my private will be kept until the first synchronization with Outlook, if yes or no I typed 'Done '.  Can I add text to a note for a long period of time and wait until I'm completely done for tap 'Done' or tap "Done" after a short period of time and then come back in the Note to continue editing.  It does not matter.  No matter what the text has been given in the first few minutes (up to what I assume is the first synchronization) is the only text that will be retained.

  I don't have a problem with whole Notes that are created on my desktop is properly synchronized to my priv.

  I have no problems with Mail, calendar, Contacts or tasks synchronization.

  My synchronization interval is set to "automatic (Push).

  While responding not to the root cause, I seem to have a solution.

  As a first step, our technology people suggested I have delete the account and add it in again.

  That seems to have done the trick.  Since last night, all my Outlook applications are synchronization correctly, in both directions

• Get the message "the Outlook calendar synchronization failed".

  I hope someone can help. When I sync, the hotsync log gives me the following information. Everything syncs fine except used to synchronize the calendar. The message is not to give me some info on why it won't sync (except maybe the words 'Recovery Sync' - do not know why it is said that). I had a Palm for years and never had this problem. All started a week ago. I have a Tungsten E and use Windows XP. Thanks in advance to anyone who can help!

  HotSync operation began on 23/10/08 14:45:28
  Outlook calendar
  -Recovery Sync
  Outlook calendar synchronization failed
  Outlook contacts
  -Fast Sync
  OK Outlook contacts
  Outlook tasks
  -Fast Sync
  OK Outlook tasks
  Outlook notes
  -Fast Sync
  OK Outlook notes
  Outlook calendar
  -Do nothing
  OK Outlook calendar
  Outlook address book
  -Do nothing
  Address Book Outlook OK
  Prospects to do list
  -Do nothing
  OK Outlook to do list
  Block-memo Outlook
  -Do nothing
  Block-memo Outlook OK
  Charges - sync configured to do nothing
  Notepad OK
  VersaMail - Sync configured in a way nothing do
  Documents To Go OK
  -Backup db preferences saved in the file C:\Program Files\Palm\Linda\Backup\Saved_Preferences.PRC
  System OK
  HotSync operation ends 23-10-08 14:45:34

  Strange, well regardless of what version you have you need to update the current version of Palm Desktop. Go here http://www.palm.com/us/support/downloads/windesk414e.html download and install this version. Once done try to synchronize. If you have problems with this return ticket.

  Message is about: Treo 800w (Sprint)

• After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  What can I do?

  Have you tried what he says in the link I provided?

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Specifications of configuration resource synchronization failed

  Hello

  I am getting below error in my ESX (2 node cluster) environment:

  Resource configuration specification synchronization failed on the 'abc' host in XYZ.

  Reason: The operation is not allowed in the current state.

  I googled on the net and most of the people advised to run the command "service mgmt-vmware restart'.

  Can someone tell me what will be the impact if I run this command in the production environment. The ESX host is currently running 15 VMS.

  GMR

  This command restarts the process spend.   There should be no impact on your VMS running if you have the host ESX patched properly, or if your esx host settings to start automatically on shutdown of the running virtual machine is turned off at the start of the ESX host.  You can check your host by looking at the configuration tab - then under the section software, there is the link to start/stop the virtual machine.

  If it is disabled so no worries about your patch level.  If it is enabled, make sure you have the appropriate fix.

  There are various patches to apply to avoid any reboots virtual machine when you run this command, if your settings on the host computer enable the autostart VM when starts the ESX Server.

  Here is a link to the KB for ESX 3.5 http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003457 , you can check the download area for the

  a patch appropriate for your build here > http://support.vmware.com/selfsupport/download/

  In the service console, you can run esxupdate query-l to verify which patches are installed on your host computer.

• iCloud drive synchronization failed

  Hi all

  I have a plan to iCloud 200 GB and filled my iCloud 84 GB data drive. I downloaded all of my iMac (OS X El Capitan) 2 weeks ago.

  I then enabled reader iCloud on my iPhone and PC. Everything (except a file on my PC) seems to sync right.

  But, with my MacBook Pro (OS X El Capitan), when I activated iCloud drive, there was a real problem.

  It seems fine synchronization and download several GB of files, but, at the same time, without anything special happening and several hours after the start, it's just... stop!

  And when I restart the iCloud drive computer restarts all over again as if nothing had ever been downloaded! I reboot again and it lights up constantly, never be able to finish my drive download whole iCloud.

  Also, I tried everything I found in this thread without success:iCloud Drive no local sync

  What can I do?

  Thanks for any response.

  When the sync seems to fail, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• PC Companion - Outlook synchronization fails with an unknown error

  try a synchronization with outlook 2010 led to a unknown error, reading the newspaper:

  09:18:29, 37 [PCCompanion] 09/14/11 activate CalendarManager
  09:18:45, 15 [MapiThk] 05/13/06 Outlook 2010 detected.
  09:18:45, 15 [Syncengine] 13/05/22 PIM Get database by default 3 name
  09:18:45, 18 [Syncengine] 13/05/22 lead \\Microsoft Exchange.pst
  09:18:45, 22 [Syncengine] 13/05/22 PIM Get database by default 11 name
  09:18:45, 22 [Syncengine] 13/05/22 result \\WindowsContacts.cts
  09:18:45, 22 [PCCompanion] 09/14/11 enable synchronization
  09:19:19, 65 [Device] 14/09/18 check the status of the device...
  09:19:19, 65 [Device] 14/09/18 check the status of the finished device.
  09:19:47, 14 [CAgdOutlook] 01/13/08 InitAutomation
  09:19:47, 14 [CAgdOutlook] 01/13/08 OpenCalendar
  09:19:47, 14 [CAgdOutlook] 01/13/08-
  09:19:47, 14 [CAgdOutlook] 01/13/08 m_hLibrary FAILED

  PC Companion 2.10.228

  Reboot of the PC Companion helped, now, you can synchronize the calendar

• Firefox anchor link works the first time, fails the second time

  My site uses anchor of the form href = #1234 file.htm links to access < a name = 1234 > in file.htm.

  It works fine when the site is loaded locally on my PC at home. When I download on my site platform it works the first time I use, then fails by jumping to the top of file.htm. IE works fine on the platform of the site as well as on my PC at home.

  Hello

  I'm glad to hear that your problem has been resolved.

  If you have not already the case, please mark this thread as solved by the solution of marking.
  
  This will help other users experience similar problems helps to find faster and more efficiently.

  I hope that you will continue using our products and we thank you for contacting the Mozilla Support.

• El Capitan utility disk first aid fails - unable to unmount the volume for repair

  Question: Given the following error with Disk Utility first aid and success with diskutil check volume, I should consider my drive damaged or volume?

  After a crash of the system on my Mac mini (end 2012) running that OS X El Capitan 10.11.3 has experienced a kernel panic induced by the adapter USB Wi - Fi, I dutifully ran first aid utility disk on each volume on the disk, in order to ensure the integrity of system files.

  What I feel with disk utility (GUI) first aid:

  First aid process has failed. If it is possible to backup the data on this volume.  Click OK to continue.

  Check the storage system

  Volume control

  disk4s2: search Volume headers

  disk4s2: search for disc labels

  12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 group of logical volumes on 1 device

  disk4s2: search the Volume metadata

  Logical volume group has a Volume of metadata 24 MB with double redundancy

  Start the analysis of the metadata for a valid checkpoint

  Load and check the Segment headers

  Load and check the payload control point

  Load and check the Transaction Segment

  Incorporate 0 most recent checkpoint operations of no

  Load and check the virtual address Table

  Load and check the use Table Segment

  Load and check the Metadata Superblock

  Load and check the volume logic B-trees

  Logical Volume group contains 1 Logical Volume

  Load and check 3D8DB35F-FA41-4A58-BA33-84A2C08FEE93

  Load and check 1CD6382C-9DF5-44E6-8C66-1CDC3DE5DB8A

  Load and check the summary of Freespace

  Load and check the accounting of block

  Load and check out virtual addresses live

  New control point of transaction commit is valid

  Load and check the Segment cleaning

  The 12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 volume seems to be OK

  Checking storage system exit code is 0

  Updated support for the volume partition that

  Impossible to disassemble for repair volume

  Operation failed...

  (underlining)

  Additional information: I didn't have any problems with this disk volume. I use it only as a Time Machine backup destination. It is an encrypted volume OS X Extended (respect for case-sensitive). My concern involves only disk utility complaint that its "first aid process has failed."

  After reading the complaints in other forums that utility disk on El Capitan has been "dumbed down" and can not perform many of the functions that the utility of the same name used to be able to perform in previous versions of Mac OS (complaints, I can't confirm because I'm relatively new to MacOS - although extremely in computing with Windows, UNIX and Linux) (, so I didn't get to use disk utility a lot, before El Capitan), I decided to do the same "check the volume" that I knew first aid was trying to perform with the diskutil command-line app.  Guess what? No error!:

  What I have experienced with command-line diskutil:

  sudo diskutil verifyvolume disk9

  Audit file system began on disk9 6TBMacOS_1_Archive

  Check the storage system

  Volume control

  disk4s2: search Volume headers

  disk4s2: search for disc labels

  12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 group of logical volumes on 1 device

  disk4s2: search the Volume metadata

  Logical volume group has a Volume of metadata 24 MB with double redundancy

  Start the analysis of the metadata for a valid checkpoint

  Load and check the Segment headers

  Load and check the payload control point

  Load and check the Transaction Segment

  Incorporate 0 most recent checkpoint operations of no

  Load and check the virtual address Table

  Load and check the use Table Segment

  Load and check the Metadata Superblock

  Load and check the volume logic B-trees

  Logical Volume group contains 1 Logical Volume

  Load and check 3D8DB35F-FA41-4A58-BA33-84A2C08FEE93

  Load and check 1CD6382C-9DF5-44E6-8C66-1CDC3DE5DB8A

  Load and check the summary of Freespace

  Load and check the accounting of block

  Load and check out virtual addresses live

  New control point of transaction commit is valid

  Load and check the Segment cleaning

  The 12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 volume seems to be OK

  Checking storage system exit code is 0

  Check the file system

  Using the live mode

  Perform direct verification

  Logged more HFS volume control

  Detected a case-sensitive volume

  Checking extents overflow file

  Check the extended attribute file

  Checking volume bitmap

  The 6TBMacOS_1_Archive volume seems to be OK

  File system check exit code is 0

  Finished on disk9 6TBMacOS_1_Archive file system check

  I will finish success of diskutil verifyvolume that my disk volume is not serious and that Disk Utility first aid simply does not correctly?

  Thank you!

  -IlDavo-

  I think you might be able to do a repair of first aid, after you have disassembled the drive first:

  1. Run OS X by an external device (ex: USB mode, or external hard drive or disk target from another Mac)
  2. Launch the Terminal and run the following command umount f /Volumes/ (ex: umount f/Volumes/Macintosh\ HD)
  3. Then run disk utility first aid.

  I had this problem on a Macbook Air, I tried to recreate the image to work, so I didn't need to get anything off the drive. I tried to format the drive and reinstall OS X. So I don't know if first aid work after disassembly, but it worked without a doubt after that I did the first two steps above and then deleted from the disk. Not sure if this will help, but worth a try, I guess.

• The first Installation fails after first Boot of the Satellite L750

  Hello.

  I turned on my brand-new Satellite L750 - 04K 010 for the first time tonight (bought new) and start going through the initial setup process for Windows 7 Home Premium. The installation must "Installing devices" and then hung up without activity for about 2 hours, how I decided to restart.

  Then I kept getting the error windows installation has failed and would then need to restart the installation process. The computer will restart but kept coming up with the same error and the loop would continue even once.

  I have not received the installation discs.

  I tried to press F8 to see if the computer repair would work but only gave options to repair the system to a previous state. No Toshiba option was available.

  Help!

  Thanking you in advance,

  Greg

  It's pretty stupid situation now.
  If there is no way to launch the installation of recovery once again I recommend your dealer and ask for help. With other words, ask for the replacement of the laptop.

  What you can also do is to contact the nearest Toshiba service provider and explain the situation. I put t know what they can do for you, but I imagine that you will get a DVD of recovery for the installation of the OS.

  Of course I n don't know what the right solution, but I don't see another option for you.

• Synchronization failed

  I can't synchronize my pilot m500 with my computer. He is a recent problem. When it appeared everything first, I bought a crib for the device that has successfully worked once. I am now unable to connect using my cable or the cradle. Any ideas?

  217 Co wrote:
  

  Synchronization Manager is present in all programs but when selected does not start. Palm Desktop is functioning normally and all the data is available. Recommend you uninstall and reinstall Palm Desktop? I have the disc. Then I lose all data in the office? A soft reset would be a first step better? I use a USB cable and cradle.

  A Soft Reset (restart simple) would always be the first thing I would try if it was my camera.

  You must open the toolbar HotSync Manager and tell him to use the USB port.

  If you can't get the HotSync Manager to open, which would indicate the problem.  Palm Desktop is designed to preserve user accounts when you uninstall / reinstall, but it did not hurt to be doubly secured by saving a copy of your data on your PC!

  Copy the folder C:\Program Files\Palm\ < your user account name > elsewhere.

  WyreNut