Specifications of configuration resource synchronization failed

Hello

I am getting below error in my ESX (2 node cluster) environment:

Resource configuration specification synchronization failed on the 'abc' host in XYZ.

Reason: The operation is not allowed in the current state.

I googled on the net and most of the people advised to run the command "service mgmt-vmware restart'.

Can someone tell me what will be the impact if I run this command in the production environment. The ESX host is currently running 15 VMS.

GMR

This command restarts the process spend. There should be no impact on your VMS running if you have the host ESX patched properly, or if your esx host settings to start automatically on shutdown of the running virtual machine is turned off at the start of the ESX host. You can check your host by looking at the configuration tab - then under the section software, there is the link to start/stop the virtual machine.

If it is disabled so no worries about your patch level. If it is enabled, make sure you have the appropriate fix.

There are various patches to apply to avoid any reboots virtual machine when you run this command, if your settings on the host computer enable the autostart VM when starts the ESX Server.

Here is a link to the KB for ESX 3.5 http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003457 , you can check the download area for the

a patch appropriate for your build here > http://support.vmware.com/selfsupport/download/

In the service console, you can run esxupdate query-l to verify which patches are installed on your host computer.

Tags: VMware

Similar Questions

Error blackBerry software - synchronization failed, impossible to deal with organizing data

I had a Q10 Blackberry last week. I downloaded and installed the PC of Blackberry link 1.2.2.13 version. Two-way sync USB worked fine. Now, all of a sudden, I get the error message "synchronization failed, impossible to deal with organizing data." I tried to reset the synchronization options, but not joy. Also tried to uninstall and reinstall the software Link 1.2.2.13, once again no joy. Any suggestions?

UPDATE: I spent 4 hours on the phone and the remote session with the help of Blackberry last night. After doing some troubleshooting to isolate the problem, determined that something on the device caused the problem of Outlook synchronization. One thing I've learned, it's that it can take a long time to synchronize and even though the progress of the screen may appear frozen, let it go until the end - sometimes it took 20-25 minutes, but eventually completed. Here's the process we went through - I would recommend appellant help BB and work with them to make sure you have not accidentally delete Outlook contacts and calendar of important information of your PC or BB device!.

(1) we tried an uninstall/reinstall the PC Link BB software and that did not fix the problem.

(2) to isolate the problem of synchronization. We first did a synchronization of 2 channels 'contacts' and 'calendar' and who was a failure. Then did a synchronization of only 2 channels 'contacts' and managed. Then did a synchronization of only 2-way 'calendar' and that was a failure - so the problem was linked to calendar data and something on the device has been the cause of the problem or corrupted.

(3) link BB allowing us to make a backup complete unit.

4) then decided to do a 'Wipe security' on the device of BB Q10 to erase all the data and settings and return to a clean boot device configuration. I was nervous about it - make double sure that Outlook all contacts and calendar data on the device and the PC are completely backed up in case something bad happens. Nothing serious happened, but I was gald, we made the backup!

(5) has the 'Security Wipe' feature (on the device, the settings > Security and privacy > wipe security) and phone rebooted without problems (takes a while to do).

(6) then used link BB to do a sync test 1 channel 'contacts and calendar' from PC to device. It worked without problem.

(7) we then used BB link do a "restore" full backup of device, as we did in step 3 above. It takes a while to make and was a success.

(8) once the restoration of the aircraft was complete, BB link configured to perform a synchronization of 2 channels of the two 'contacts' and 'calendar '. Does the synchronization and was a success. Did a test by adding the new entry of the calendar on PC and did another 2-way sync - all worked very well. Seems that the problem has been corrected, but will follow in the coming days.

Lessons learned:

(1) If you have a lot of Outlook contacts and calendar entries, the synchronization may take a long time. Be patient and let it run - even if it seems stuck, etc!

(2) save all Outlook data on the device and the PC to make sure that you have a backup something bad happened during troubleshooting. We had not something bad happens, but I was gald we made a backup anyway.

(2) call BB help - support person, I worked with was fabulous, even if it took some time to work through a patch.

Get the message "the Outlook calendar synchronization failed".

I hope someone can help. When I sync, the hotsync log gives me the following information. Everything syncs fine except used to synchronize the calendar. The message is not to give me some info on why it won't sync (except maybe the words 'Recovery Sync' - do not know why it is said that). I had a Palm for years and never had this problem. All started a week ago. I have a Tungsten E and use Windows XP. Thanks in advance to anyone who can help!

HotSync operation began on 23/10/08 14:45:28
Outlook calendar
-Recovery Sync
Outlook calendar synchronization failed
Outlook contacts
-Fast Sync
OK Outlook contacts
Outlook tasks
-Fast Sync
OK Outlook tasks
Outlook notes
-Fast Sync
OK Outlook notes
Outlook calendar
-Do nothing
OK Outlook calendar
Outlook address book
-Do nothing
Address Book Outlook OK
Prospects to do list
-Do nothing
OK Outlook to do list
Block-memo Outlook
-Do nothing
Block-memo Outlook OK
Charges - sync configured to do nothing
Notepad OK
VersaMail - Sync configured in a way nothing do
Documents To Go OK
-Backup db preferences saved in the file C:\Program Files\Palm\Linda\Backup\Saved_Preferences.PRC
System OK
HotSync operation ends 23-10-08 14:45:34

Strange, well regardless of what version you have you need to update the current version of Palm Desktop. Go here http://www.palm.com/us/support/downloads/windesk414e.html download and install this version. Once done try to synchronize. If you have problems with this return ticket.

Message is about: Treo 800w (Sprint)

Synchronization fails when password synchronization is enabled

Using Firefox on Arch Linux (same number on 8 Debian), synchronization fails systematically when password synchronization is enabled. I reduced to a few passwords, sync works fine if password synchronization is disabled. I did a master password, and I do not have locally stored passwords.

Your list of extensions in the system detail list shows the "GNOME keyring password integration" extension, so I guess that this extension is the cause of your problem and the extension is not compatible with sync.
You could test that by disabling this extension.
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

Windows Update Standalone Installer: error 0x80073afc the resource loader failed to find MUI file. Windows 7 64 bit

I have a desktop PC running Windows 7 Professional 64-bit. There is an update which is unable to complete, causing the PC to undo changes to before the update. It usually takes an extreme amount of time, and of course, I've always updates installed. I tried to use the Microsoft Fixit tool, which came back with error 0 x 80070057. I saw in a community forum that I could try the tool of microsoft SURT, but after the long scan he came back with the following error:

Windows Update Standalone install

Setup has encountered an error: 0x80073afc

The resource loader failed to find MUI file.

Please help.

Hello

Thanks for posting your question on the Microsoft community.

Thank you for details on the question and your efforts to resolve.

This problem can occur because of corrupted Windows Update files and components.

I suggest you to reset the Windows update components and check if that helps.
Refer to this article:
How to reset the Windows Update components?
https://support.Microsoft.com/en-us/KB/971058

Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

I hope this information helps.

Please let us know if you need more help.

Thank you

BlackBerry smartphones can not configure the synchronization

Our person I.T. installed office on my computer Manager. I plugged the phone and the Desktop Manager. When I click on the synchronization of the configuration. button, she begins and shows: "Determination root Configuration name of hand". It stops and I get "unknown error reported. This happens when hanging the phone to the computer as well.

Here's what I'm working with:

Outlook 2003

Windows XP Professional 2002 Service Pack 2

BlackBerry Curve

Desktop Manager Version 4.3.0.17

I set up my email account and it works fine. Any help would be GREATLY appreciated!

Thank you!

These were rights. When I was given administrator rights, I was able to configure the synchronization. I sync a curve. My rights have been reduced to their normal level and timing of the thin curve.

ins-20802 - assistant configuration net oracle failed during installation - centos 7

Hello I'm trying to follow the Manual for installation of the Oracle 12 c. In fact it was already installed on the machine and then uninstalled.

During installiation, I get the error "[ins 20802] oracle net configuration assistant has failed during installation" window. And the proposed detailed log file, where I can see:

INFO: No arguments to pass to stdin

INFO: ... GenericInternalPlugIn: starting read loop.

INFO: Read:

WARNING: Skipping line:

INFO: End of argument passing to stdin

INFO: Read: Parsing command line arguments:

WARNING: Skipping line: Parsing command line arguments: