SCXI-1600 is not communicating with MAX

Similar Questions

• DASYLab is not communicating with the hardware dbk25a3

  Hello:

  I'm trying to troubleshoot a high pressure processing equipment. This system uses a PID controller. The level of pressure does not stop at the set point, but continue to increase. I am trying to solve this problem. As the program was written by someone else and there is no documentation on what each represent module and done. It is very difficult for me to solve the problems. Therefore, I decided to start all over again with my own module.  However, I have a problem. My hardware (DBK25 and others) is not communicating with the module of Dasylab. I tried several different things, that nothing seemed to work. I get this error.

  DBK25A3O

  An entry of a module is open.

  Any help is highly appreciated

  Thank you

  Krishna

  The error message indicates that you have a module that has one input open - nothing is connected. You must have a data wire to all entries.

• Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.

  Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.  Maintains documents in the print queue and print them when the computer is restarted.  In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  Please answer the following questions that would help us provide a better solution.

  What version of Windows are you using?

  Try to follow the steps and check:

  Step 1:

  Visit the link following if you are using Windows 7.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If you are using Windows Vista, see the steps mentioned in the link.

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems

  Try the steps from the link following if you are using Windows XP.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Step 2:

  Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Step 3:

  About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Please feel free to respond if you have any other questions, we would be happy to help.

• My hp c4500 Wireless will not print. Troubleshooting says my printer is not communicating with the router.

  MY hp c4500 wireless printer will not print. Troubleshooting says my printer is not communicating with the wireless router. I've checked everything. Unable to find the answer.

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Dell v313 printer - my printer is not communicating with my computer - I need enable two-way communication in the printer properties

  My printer is not communicating with my computer. He always tells me to activate the two-way communication option in the printer properties dialog box.

  How can I do this?

  MichaelMcQuillar,

  Please check your virus protection and firewall. They seem to block communications from the printer.

  Rick

• Printer is not communicating with the computer

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have problems with my Dell v305 printer I tried everything. Error message indicates that the printer is not communicating with the computer

  Hi vanessa James Sluys Veer,.

  Probably you should install/update your printer drivers for your operating system.

  Please see the link below for the Dell Web site:

  http://support.euro.Dell.com/support/topics/topic.aspx/EMEA/shared/support/DSN/en/document?c=UK&l=en&s=Gen&DN=1093016

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Lexmark Interpret S405 is not communicating with the computer and will not print

  My computer works with Windows 7 and updates automatically.  I got the Lexmark Interpret S405 for 18 months, and it has worked great until a couple of months.  When I try to print, I get an error message indicating that the printer is not communicating with the computer.  When I check the printer, it shows he's ready.  The print job shows that it is ready to print, but nothing happens except for this message.  When I try to erase the impression, it really takes a lot of time - usually have to unplug the printer so that it can finally clear.  Then it still will not print if I try again unless I restart the computer.  Lexmark support page says that there is a problem with Windows 7 and their product.  All the solutions for this problem yet?

  Computer model of the bridge ZX6970, OS 64-bit, intel CORE CPU I-13 3.30 GHz, Windows 7 Home Premium.  Can someone advise a fix for this problem?  Thank you!

  Hello

  Have you tried to download and install the updated firmware for the Lexmark Interpret S405 from the manufacturer's website.

  If this isn't the case, please download and install it.

  Download Firmware for your printer!

  We know the results.

• HP 8500 a scaner is not communicating with the computer

  He is used to, but now it will not scan HP for computer

  Hi JamesO'Riley,.

  ·         What version of the operating system is installed on the computer?

  ·         What happens when you try to scan?

  ·         You get the error message?

  ·         Have you made changes in software/hardware, or any Windows update on the computer?

  Uninstall and reinstall the software and the related drivers for the scanner and check if it helps to solve the problem.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Common issues with HP Diagnostic tools

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02788621&cc=us&DLC=en&lang=en&LC=en&product=4083969

• EpsonSX525wWD is not communicating with the computer

  I have wifi printer Epson SX525WD.  computer on broadband.  printed many times with no problems, all of a sudden stop commnuicating with computer, every thing is
  connected and on, my printer just ready readings will be to print

  Hello
  • What happens when you try to print over wireless network?
  • Is your shared printer on your wireless home network?
  • What is the version of Windows running on your computer?

  From now on, I suggest you try the steps mentioned below.

  Method 1: Problems printing and printing errors

  Automatically diagnose and repair when you cannot print or for problems setting up a printer, connecting to a network printer and related errors.

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: Troubleshoot network printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: Even if the measures are for Windows Vista, you can always go ahead and try the steps.

• My printer is not communicating with my PC

  I can't use my printer - when I try I get a message telling me that my firewall is blocking my printer from functioning.

  Hi Caseyatbat16,

  You can temporarily disable the firewall and check if the printer can communicate with the computer. You must give the exception to the printer to communicate with the computer.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know if that helps.

• My Dell 946 Printer is not communicating with my computer. I have a Dimension 4700. My documents are lining up in the print queue, and it is not printing.

  I tried a lot of things
  -disconnect and connect my computer
  -Uninstall and installation of my computer
  -using Device Manager to reset my printer ports.
  Nothing works

  Hello Lsnnj,

  Thank you for your message.  It could be a few reasons that this is happening, try them next steps.
  1. click on 'Start' > right click 'Manage' > click the (+) sign next to "Services and Applications" > click on "Services" below
  On the right, highlight it, and then double-click "print spooler".
  Make sure that the Startup Type is set to automatic
  On the "" Connection tab and make sure that the Local System account is selected, and also that allow the service to interact with desktop is activated.
  Below, you will see the hardware profile. Make sure that this option is enabled, if it is disabled, select the profile, and then click the Activate button.
  Restart your computer and test the printer.
  If this does not resolve your problem, try to go to the website of the manufacturer of your printer and download/install the latest drivers for your printer.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My scanner is not communicating with my Mac

  My printer is HP PSC 1401 all-in-one printer scanner and copier

  My computer is Pro version Mac OS X 10.8.2

  My printer will not scan image on my computer.

  When I try, a message from my computer asking me if I want to download the software

  When I try to download, it says that it is impossible to right now. Try again later. (not done several times), no luck

  I can print pictures of the computer...

  Any suggestions?

  Try scanning from your Mac.  Use the Image Capture in your Applications folder.  Open it, click on scanner on the left, the show details on the background.

• I have a jet2050 printer j510 series HPdesk that it prints well but when I want to ink levels it says that my printer is not communicating with the computer?

  The computer must be connected because it prints my orders?

  Hello

  What operating system is installed on your computer?

  I suggest you to follow the steps from the link and check if it helps:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=4027463&prodTypeId=18972&ObjectID=c02061335

  You can also post your query on HP forum to get help:

  http://h30434.www3.HP.com/

• Error - 10401 with the SCXI-1600

  Hi all

  I have a system of aquistion of data based on the SCXI-1600 and already work with LV6.1 software and I want it to be used with LV12 improve.

  When I tried to record data using MAX I have, it works very well. but trying to save data in labVIEW with function "I acquire waveforms", it gives me error attached 10401.

  can someone help me solve this problem?

  Thanks in advance,

  Ahmed Elsayed

  This function is part of the outdated traditional DAQ driver and your image shows DAQmx is active for the device. You should carry all your code to use DAQmx. DAQmx was introduced with LabVIEW 7. If you choose to stay with the outdated driver, you will need to do a reset and switch drivers, but assistance will be limited.

• "communication not available with the printer" message when you try to print to a Lexmark 1270 x all-in-one

  I am running windows xp family.  I don't know what happened, but all of a sudden, I get this message when I try and print to my lexmark x 1270 "communication not available with the printer. I tried every troubleshooter, I contacted Lexmark support that they gave up, saying: it must be a file is missing from the windows registry, you can help me?

  It seems that if you say that the pilots were not reinstalled successfully.  What was the mystery file that could not be found?

  Do you remember how the software has been uninstalled?  Was something else than the control panel > Add / Remove Programs (or the link "Uninstall" from start > all programs) used?

  If you do not really clean things, attempts to reinstall the printer drivers may actually just end up putting the old drivers back in place.

  This is the easiest way to uninstall and reinstall the printer drivers: Article 1.  The critical step is #4.

  This page has more detailed advice for cleaning things out before you reinstall: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  I asked the firewall and antivirus applications because sometimes, some security software may interfere with the printers.  This shouldn't be a problem with the firewall of Windows XP and Microsoft Security Essentials.

  Finally, your problem could end up being hardware related.  Lexmark support has no hardware troubleshooting operation?  The manual for your x 1270 says:

  All-in-One is not communicating with the computer

  1. disconnect and reconnect both ends of the USB cable. For more help, see the
  installation documentation.
  2 unplug the power cord from the wall outlet, plug it in again, and
  Press Power. For more information, refer to the installation documentation.
  3 restart the computer. If the problem continues, remove and then reinstall
  the software. For more information, see page 16. [which ask you to remove the software using the link "Uninstall" - which is not complete, as described above]

  If you have another type of printer USB cable, you should try it exchanges.  Ideally, you need to connect to the printer on another computer, but maybe it's not convenient for you.